Commit graph

1359 commits

Author SHA1 Message Date
Hauke Mehrtens
caff3b5aee broadcom-diag: fix 'autoload' number of diag.ko
Change the autoload number from '5' to '05' so the module loads earlier (as intended).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38293
2013-10-02 23:14:08 +00:00
Hauke Mehrtens
302d27f268 c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
This closes #14258

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38277
2013-10-01 22:41:46 +00:00
Hauke Mehrtens
c57ac5fcb7 kernel: add industrialio-triggered-buffer.ko only when the config option is selected.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38276
2013-10-01 22:40:32 +00:00
Hauke Mehrtens
1158f22b02 ep93xx: fix sound dependencies for ep93xx
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38274
2013-10-01 22:38:40 +00:00
John Crispin
391ec155a0 kernel: lib-textsearch needs to be auto probed for amanda nat to work
https://dev.openwrt.org/ticket/14232

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38262
2013-09-30 20:48:12 +00:00
Felix Fietkau
17be4e9d14 mac80211: add AP inactivity handling / probing fixes to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38257
2013-09-29 19:42:00 +00:00
Felix Fietkau
f07713f7cf mac80211: really fix the long standing wds ap tx power regression (#14153)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38255
2013-09-29 12:53:21 +00:00
Felix Fietkau
2beabf6c11 ath9k: fix an AP mode powersave issue with aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38249
2013-09-29 11:07:58 +00:00
Felix Fietkau
32d54de3b9 kernel: disable kmod-iio for linux 3.6 as well (to avoid build issues due to missing config symbol changes)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38247
2013-09-28 05:22:05 +00:00
Felix Fietkau
e2420239ae kernel: exclude regmap-spi.ko if SPI support cannot be selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38245
2013-09-27 21:12:15 +00:00
Felix Fietkau
1f037b5248 kernel: make sound-soc-core depend on kmod-ac97
it has a conditional #ifdef based dependency on it, which trips up on
some targets

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38242
2013-09-27 21:12:04 +00:00
Felix Fietkau
3c045e9933 kernel: remove old kernel compat code for pcmcia
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38239
2013-09-27 20:47:09 +00:00
Felix Fietkau
e232a92c08 kernel: mark kmod-thermal menuconfig symbol as hidden to avoid building it on targets with no thermal drivers
Should fix build errors with Linux 3.3/3.6 targets, which use different
kconfig symbols

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38238
2013-09-27 20:44:11 +00:00
Luka Perkov
eb486aadb8 kernel: add thermal modules
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38230
2013-09-27 10:49:33 +00:00
Gabor Juhos
7530971113 package/kernel: add support for industrial-io and AD799x
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
Gabor Juhos
4fcc9ce9ff package/kernel: add hwmon driver for ADT7410
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38186
2013-09-25 18:00:34 +00:00
Gabor Juhos
6ac0dfb280 package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38185
2013-09-25 18:00:33 +00:00
Felix Fietkau
9d24525b1d kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38055
2013-09-19 06:33:53 +00:00
John Crispin
5799adc238 lantiq: fix bug in hcd gpio detetcion code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38043
2013-09-18 16:31:49 +00:00
Hauke Mehrtens
4c52ed50d7 brcm47xx: update board detection patches
This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38036
2013-09-18 14:33:54 +00:00
Felix Fietkau
50bc1a7593 ath9k: add missing tx locking
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38034
2013-09-18 13:24:55 +00:00
John Crispin
1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin
2b0cb17d42 lantiq: update packages for v3.10
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38028
2013-09-17 21:45:56 +00:00
John Crispin
f12f4074af kernel: make most modules use AutoProbe
now that we have modprobe we can set more than half of the modules to AutoProbe

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
Felix Fietkau
b3ceaf834d ath9k: merge a fix for PS-Poll responses + aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38017
2013-09-17 10:07:56 +00:00
Felix Fietkau
5d8cdd84e8 kernel: fix config symbol for kmod-crypto-hash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38015
2013-09-17 09:54:05 +00:00
Felix Fietkau
fd44388bbf mac80211: drop spoofed packets in ad-hoc mode (fixes #12427)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38013
2013-09-17 09:17:40 +00:00
Hauke Mehrtens
bf8cf89fc9 broadcom-diag: add GPIO configuration for Linksys E2000 V1
Thank you Javier Achirica for the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38008
2013-09-16 19:52:23 +00:00
Hauke Mehrtens
2b4e96fe09 broadcom-diag: Add WRT310N v1 gpio leds and buttons
Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 38007
2013-09-16 19:50:14 +00:00
Hauke Mehrtens
86405f2c4c brcm47xx: add detection code for Huawei E970
This is based on a patch by Mathias Adam.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38001
2013-09-15 17:00:45 +00:00
Felix Fietkau
7a704be4bb ath9k: add another minor tx path fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37985
2013-09-14 15:30:13 +00:00
Felix Fietkau
6eeb0261e6 ath9k: merge a fix for tx processing issues with aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37982
2013-09-14 14:46:39 +00:00
Hauke Mehrtens
0c597a8f53 kernel: add missing config option
SVN-Revision: 37978
2013-09-13 20:39:23 +00:00
Hauke Mehrtens
b73b915c54 brcm47xx: board detection, GPIO for Linksys E1000 V2.1
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
Hauke Mehrtens
6c14f5f3a6 brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37970
2013-09-13 16:00:52 +00:00
Luka Perkov
15ea1a6d66 kernel: gsc depends on kmod-i2c-core
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37960
2013-09-12 23:38:54 +00:00
Luka Perkov
e4c837f6d6 kernel: fix imx sata module
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37950
2013-09-11 22:08:46 +00:00
Luka Perkov
a43c2d4e6f kernel: add imx sata module
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37937
2013-09-10 22:26:37 +00:00
Luka Perkov
7d73153e86 kernel: allow hwmon GSC driver for all targets
- enable using hwmon GSC driver on all targets
- add a kmod package for it

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
Felix Fietkau
247299bfa0 rt2x00: merge an rt2800 initialization order fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37922
2013-09-09 17:31:53 +00:00
Felix Fietkau
768e6750d7 ath9k: clean up some patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37919
2013-09-08 09:38:38 +00:00
Felix Fietkau
249c396583 mac80211: merge a big batch of upstream changes/improvements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37918
2013-09-08 09:38:32 +00:00
Hauke Mehrtens
bdc04e379f mac80211: kmod-rtl_pci: fix dependencies
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
Hauke Mehrtens
f9b790bd55 kernel: kmod-libphy, kmod-tg3: fix load order
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
Hauke Mehrtens
9af52f3a2c kernel: kmod-ssb, kmod-b44: fix load order
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
Hauke Mehrtens
fd561a47c5 kernel: kmod-firewire: fix dependencies
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
Hauke Mehrtens
11ae55cc95 mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
linux-firemware contains the same version we loaded without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
Hauke Mehrtens
14a65f1cfb kernel: kmod-fs-xfs: fix dependencies
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
Hauke Mehrtens
09a55136d7 kernel: kmod-usb-serial-keyspan: fix dependencies
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
Hauke Mehrtens
82a2969100 ath10k: enable Atheros 802.11ac driver
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.

This goes build tested, not run time tested.

[Hauke: I did some minor changes]

Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37898
2013-09-05 19:35:14 +00:00