Commit graph

15188 commits

Author SHA1 Message Date
Felix Fietkau
d965f41ac8 mt76: update to the latest version
6745830 mt76: fix race condition in station removal
7e5c819 mt76: add mt76_sta_remove helper
75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev
fd85ff9 mt7603: use mt76_sta_remove helper
0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling
83a80ca mt76: request tx status for powersave released EOSP packet
df5c797 mt76: fix uninitialized mutex access setting rts threshold
0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine
4248446 mt76x0: pci: enable VHT rates in IBSS mode
f75efd8 mt76x2u: phy: add TX_SHAPING calibration
c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch
9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine
3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine
88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-13 21:22:28 +01:00
Felix Fietkau
3879fc2b1a mac80211: fix spurious disconnections with powersave clients
Affects all drivers using ieee80211_tx_status_noskb, e.g. ath9k and mt76

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-13 20:35:29 +01:00
Stijn Tintel
43e1b38e4a kernel: drop old bluetooth config symbols
They do not exist in any of the supported kernel versions.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-12 19:11:54 +02:00
Daniel Engberg
a95bef0579 bzip2: Replace main site with mirrors (FS#1913)
Use Gentoo and FreeBSDs distfile caches as mirrors because
main site/domain is abandoned.
Source: https://lwn.net/Articles/762264/

Fixes FS#1913

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-12 17:09:09 +01:00
Alexander Couzens
81d7f82441
ugps: update to latest git HEAD
07528d43f9bc nmea.c: set _BSD_SOURCE to have timegm() & stime() on musl
b88037b6bf6a check timegm return code
ccabdf6c235f nmea.c: Add null byte to nmea fields
cdc1478a8133 remove deprication warning

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-11-11 02:37:05 +01:00
Petr Štetiar
1b4b942bce Revert "iptables: fix dependency for libip6tc on IPV6"
This patch reverts commit 2dc1f54b12 as it
breaks the build for me on x86-64 if I've IPV6 support disabled. Same config
builds fine on `openwrt-18.06` branch at 55d078b2.

  $ grep IPV6 .config

  # CONFIG_KERNEL_IPV6 is not set
  # CONFIG_IPV6 is not set

Build errors out on:

  Package libiptc is missing dependencies for the following libraries:
  libip6tc.so.0

Looking at iptables-1.6.2/libiptc/Makefile.am:

  libiptc_la_LIBADD   = libip4tc.la libip6tc.la

and to iptables-1.6.2/libiptc/libiptc.pc.in:

  Requires:	libip4tc libip6tc

It seems that libiptc needs v4/v6 libs, so v6 isn't optional.

Cc: Rosy Song <rosysong@rosinson.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-10 18:50:29 +01:00
Hans Dedecker
5617e138bd ethtool: update to 4.19
8a1ad80 Release version 4.19.
ecdf295 ethtool: Fix uninitialized variable use at qsfp dump
98c148e ethtool: better syntax for combinations of FEC modes
d4b9f3f ethtool: support combinations of FEC modes

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-10 13:44:09 +01:00
Felix Fietkau
7dd42aa592 mt76: update to the latest version
ffccb48 mt76: do not wake tx queues during flush

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-09 15:26:44 +01:00
Daniel Engberg
dbba87aa6a popt: Add main site back to PKG_SOURCE_URL
Main site is back up after weeks of downtime.
Add it back as last resort

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-09 08:50:18 +01:00
Hans Dedecker
c97c672f9b procd: update to latest git HEAD
20192e4 watchdog: improve seting watchdog timeout and frequency

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-08 14:51:33 +01:00
Hans Dedecker
559635dbb6 iproute2: update to 4.19.0
Update to the latest version of iproute2; see https://lwn.net/Articles/769354/
for a full overview of the changes in 4.19.
Remove 190-add-cake-to-tc patch as CAKE qdisc is now supported in 4.19.0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-08 11:09:13 +01:00
Felix Fietkau
68b43270f9 mt76: update to the latest version, fix a typo
29d9532 mt7603: fix faulty variable initialization in last commit

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-08 09:17:35 +01:00
Felix Fietkau
df1191bcea mt76: update to the latest version
417cf49 mt7603: improve recovery from MCU hang

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-07 20:36:50 +01:00
Rafał Miłecki
4d5b0efc09 mac80211: brcmfmac: backport the last accepted 4.21 changes
It's a typo fix & patch that helps debugging possible WARN-ings.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:17:00 +01:00
Rafał Miłecki
3eab6b8275 mac80211: brcmfmac: backport NVRAM loading improvements
This adds support for storing board specific NVRAM files as firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 11:11:08 +01:00
Rafał Miłecki
5932eb690f mac80211: brcmfmac: backport firmware loading cleanup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:43:32 +01:00
Rafał Miłecki
b50f162b3c mac80211: brcmfmac: backport the latest 4.20 changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 09:14:55 +01:00
Rafał Miłecki
f7a3459ab9 mac80211: brcmfmac: rename 4.20 backport patches
Include kernel version to help tracking changes.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-11-07 08:54:16 +01:00
Felix Fietkau
4fd9a5667e mt76: update to the latest version
172f081 mt76x0: do not overwrite other MT_BBP(AGC, 8) fields
2ae2046 mt76x0: phy: use mt76_poll_msec in mt76x0_phy_temp_sensor
add66a0 mt76x0: init: use mt76x02_mac_shared_key_setup in mt76x0_init_hardware
1f24db9 mt76x2: move wcid_tx_rate conf at bootstrap
097b2bd mt76x0: init: use mt76x02_mac_wcid_setup for wcid configuration
d0eb03e mt76x2u: init: remove not useful configuration
c7aa8f4 mt76x2u: init: use common routines for wcid/key initialization
bd568d9 mt76: move mt76x02_eeprom_copy in mt76x02-lib module
57b441d mt76x0: phy: introduce tssi calibration support
a78802c mt76x0: phy: use tssi reported value to configure tx power if available
94ad030 mt76: remove mcu_msg_alloc
15cb426 mt76: remove wait argument from mt76x02_mcu_function_select
cd76a83 mt76: remove wait argument from mt76x02_mcu_set_radio_state
9b97e0f mt76x02: run calibration after scanning
663b197 mt76x02: assure we update gain after scan
eb53745 mt76x0: dfs: fix IBI_R11 configuration on non-radar channels
ef06c30 mt76: avoid queue/status spinlocks while passing tx status to mac80211
5195257 mt7603: fix maximum rx frame size
01815e9 mt7603: use mutex from struct mt76_dev
3c8e8a7 mt7603: use irq_lock/irqmask from struct mt76_dev
8b7f50d mt76: add size check for additional rx fragments
87bad3a mt7603: stop MAC on watchdog reset
c34baab mt7603: add missing unlock in case changing the channel fails
ac6fc78 mt7603: add debugfs file to trigger watchdog resets
d9b5324 mt7603: add SPDX license identifiers
498d716 mt7603: fix checkpatch issues
a1afefd mt7603: fix handling of fixed rate packets
5ee0523 mt7603: fix tx status rate reporting for fixed-rate packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-06 22:25:49 +01:00
Koen Vandeputte
7e173b4331 valgrind: bump to 4.14.0
Release notes can be found here:

http://www.valgrind.org/docs/manual/dist.news.html

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 16:34:47 +01:00
Koen Vandeputte
5ac34818f9 ath9k: fix dynack in IBSS mode
Currently, dynack was only tested upstream using AP/STA mode.
Testing it on IBSS, showed that late-ack detection was broken.

This is caused due to dynack using Association Request/Response
frames for late-ack detection, which IBSS does not use.
Also allowing Authentication frames here solves this.

A second issue also got fixed, which was also seen AP/STA mode:

When a station was added, the estimated value would be exponentially averaged
using 0 as a starting point.

This means that on larger distances, the ack timeout was still not high
enough before synchronizing would run out of late-ack's for estimation.

Fix this by using the initial estimated value as a baseline
and only start averaging in the following estimation rounds.

Test setup:
- 2x identical devices:  RB912UAG-5HPnD + 19dB sector
- IBSS
- 2x2 802.11an (ar9340), HT20, long GI
- RSSI's  -70 / -71
- Real distance: 23910 meter

Results (60s iperf runs):

Fixed coverage class 54 (up to 24300m):
* 21.5 Mbits/sec

Dynack:
* 28.9 Mbits/sec

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-06 11:49:27 +01:00
Alexander Couzens
900005ee75
iperf: allow non-ipv6 builds
Add configure argument --disable-ipv6 when ipv6 is deselected.
Add fix-non-ipv6-builds.patch as long there is no new upstream
release.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-11-03 02:36:24 +01:00
Hans Dedecker
c9f5934c71 curl: noop commit to refer CVEs fixed in 7.62.0
When bumping Curl to 7.62.0 in commit 278e4eba09 I did not include the fixed
CVEs in the commit message; this commit fixes this.

The following CVEs were fixed in 7.62.0 :

CVE-2018-16839
CVE-2018-16840
CVE-2018-16842

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-02 13:16:13 +01:00
Christian Lamparter
dceee8cc09 ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:53 +01:00
Christian Lamparter
575d0240f9 ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-11-01 17:16:52 +01:00
Rosen Penev
8fc187a76e kernel: Remove dependencies on old kernels
Kernels 4.1 and 4.4 are not part of the tree anymore.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-11-01 17:16:52 +01:00
Daniel Engberg
f9a408b75e libconfig: Fix tarball filename (and URL)
v$(PKG_VERSION).tar.gz is a bad idea and will clash for obvious reasons.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-01 17:16:52 +01:00
Michael Heimpold
79b766d07d uboot-mxs: bump to v2018.09
Also update the U-Boot BSP patch for I2SE Duckbill devices
and remove upstreamed patch for LibreSSL support.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-11-01 17:16:52 +01:00
Kabuli Chana
390158bd2b mwlwifi: update to version 10.3.8.0-20181029
compile / test target mvebu / mamba

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2018-11-01 13:48:49 +01:00
Thomas Fuzeau
87e1894d59 kernel: add kmod-usb-serial-mos7840
Enable build of kernel module for mos7840 usb-serial devices.

Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
2018-11-01 13:44:48 +01:00
Hans Dedecker
278e4eba09 curl: bump to 7.62.0
Refresh patches, for changes in version 7.62.0 see https://curl.haxx.se/changes.html#7_62_0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-31 23:06:42 +01:00
Matthias Schiffer
dd9da51462
openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build dep
Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some
situations it may happen that libunbound and openssl are only pulled in as
build dependencies, but are not enabled in .config.

In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are
ignored (as the whole symbol depends on PACKAGE_libopenssl), and config
symbol dependencies of libunbound aren't effective either (as libunbound
is not actually enabled).

This commit works around the issue by introducing a hidden negated symbol
OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is
disabled, and ensures that OpenSSL is built with deprecated APIs in this
case. A user can still manage to break the build by explicitly enabling
libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between
build dependencies and config symbols will require further discussion.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-10-30 20:38:34 +01:00
Kevin Darbyshire-Bryant
3dba852547 dnsmasq: tighten config file permissions
Install following as config files (600) perms instead of as data (644)

/usr/share/dnsmasq/dhcpbogushostname.conf
/usr/share/dnsmasq/trust-anchors.conf
/usr/share/dnsmasq/rfc6761.conf
/etc/hotplug.d/ntp/25-dnsmasqsec
/etc/config/dhcp
/etc/dnsmasq.conf

dnsmasq reads relevant config files before dropping root privilege and
running as dnsmasq:dnsmasq

ntpd runs as root so the hotplug script is still accessible

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-30 09:25:32 +00:00
Felix Fietkau
8edce6014a mt76: update to the latest version
fdc63f1 mt76: fix regression in tx status handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-27 17:54:37 +02:00
Daniel Engberg
4056be58f3 mt76: Fix dependencies for PCI support
USB support doesn't necessarily mean that there's
PCI support available so move that to the drivers
which requires PCI support. This applies to the
sunxi platform for instance.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
2018-10-26 17:23:38 +02:00
Felix Fietkau
6026356578 mt76: update to the latest version
0b8b15f mt7603: use common mmio mcu struct
d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries
d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx
9d59d2a mt76: add support for reporting tx status with skb
ed17ba2 mt7603: use common tx status handling code
14b6c59 mt76x0: use band parameter for LC calibration

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-25 22:49:08 +02:00
Philip Prindeville
a6d02a7572 grub2: fix regression caused by binutils-2.31.1
grub-efi no longer works:

grub-mkimage: error: relocation 0x4 is not implemented yet.

See:

http://git.savannah.gnu.org/cgit/grub.git/commit/util?id=842c390469e2c2e10b5aa36700324cd3bde25875

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>i [PKG_RELEASE increase]
2018-10-25 16:51:42 +02:00
Jonathan Lancett
9ac7350240 mwlwifi: driver version to 10.3.8.0-20181022
Upgrade 88W8997 firmware to 8.4.0.52.
Removed unnecessary firmware settings.
Added vendor events.
Fixed crash problem when module is removed.
Modified the code to protect tx queues.

Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com>
[tidy commit message]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-24 17:55:14 +01:00
Felix Fietkau
2f9179419c mt76: update to the latest version
d033272 mt76: mt76x0: handle chip specific initval differences
1a2b2dc mt76: usb: fix static tracepoints
11151f4 mt76x0: antenna select corrections
dade109 mt76x0: init: simplify mt76x0_init_mac_registers
3c54612 mt76x0: pci: add missing MODULE_FIRMWARE macro
97e0269 mt76x0: mac: remove mt76x0_mac_set_ampdu_factor
5d8c4bf mt76x0: align mt76x0u and mt76x0e fw version
d4391ae mt76: move mt76x02_mac_set_short_preamble in mt76x02_mac.c
aa6ebf9 mt76: move mt76x02_init_device in mt76x02-lib module
a4a08c3 mt76: move mac beacon routines in mt76x02-lib module
6b69650 mt76: move tx beacon routines in mt76x02-lib module
8486047 mt76x0: pci: add pre_tbtt_tasklet support
acd4c99 mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib module
2d736cf mt76: move mt76x02_get_txpower in mt76x02_util.c
aa1d6bd mt76: move mt76x02_sta_ps in mt76x02-lib module
e684281 mt76: introduce mt76x02_init_beacon_config routine
c181d97 mt76x0: pci: enable AP support
3b86d99 mt76: move mt76x02_set_tx_ackto in mt76x02-lib module
41d7ef7 mt76x0: update init vals for MT_TX_PROT registers
fe5a149 mt76: move tx protection routines in mt76x02-lib module
5bca2de mt76: move mt76x02_bss_info_changed in mt76x02-lib module
d21a835 mt76: move dfs support in mt76x02-lib module
ba9d424 mt76x0: pci: add DFS support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-23 11:18:06 +02:00
Hans Dedecker
59db98d0f2 fstools: update to git HEAD
29e53af fstools: add ntfs support

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-21 20:48:36 +02:00
Hauke Mehrtens
9fcfcd49f8 mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-core
This fixes a build problem on x86.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-21 16:46:16 +02:00
Hauke Mehrtens
e1db49310e linux-firmware: intel: Add iwl 9000 and 9260 firmware
Add the most recent supported firmware file for the Intel 9000 and
9260 wireless chips. The API version 41 is not yet supported by the driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-20 16:24:29 +02:00
Hauke Mehrtens
10dffe2fa3 linux-firmware: intel: update firmware files for 7265D, 8000C and 8265
Use more recent versions for the Intel wireless chips 7265D, 8000C and 8265.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-20 16:24:29 +02:00
Yufei Miao
260be8a579 mwlwifi: driver version to 10.3.8.0-20181008
Signed-off-by: Yufei Miao <myf@myf.cloud>
2018-10-20 16:24:29 +02:00
Roman Bazalevskiy
47e7a3904d kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.
Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
2018-10-20 16:24:29 +02:00
Deng Qingfang
858a8acf3e kernel/modules: add kmod-fou6 package
IPv6 support for Foo-over-UDP tunnel

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2018-10-20 16:24:23 +02:00
Robert Marko
f6a26f9a20 linux-firmware: Update linux-firmware to 2018-10-18
Kalles ath10k PR was finally merged so update linux-firmware to
include those changes.

This is needed since disabling ath10k-firmware a lot of custom BDF-s
in board-2.bin-s are not available in previously outdated linux-firmware
board-2.bin-s.
This also includes support for boards currently using ipq-wifi and other
WIP ones.

Runtime tested on 8devices Jalapeno.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-10-20 16:13:39 +02:00
Linus Walleij
10ec966f7b gemini: Break out USB to packages
This creates a new kernel package for the fotg210 host
controller and uses that with the gemini to shrink the
kernel. The SQ201 needs the USB2 PCI package as well.

The build system required me to make kernel_oldconfig
beofore it would build without errors so some minor
unrelated Kconfig entries are changed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-10-20 16:13:39 +02:00
Kevin Darbyshire-Bryant
6c4d3d705a dnsmasq: bump to v2.80
dnsmasq v2.80 release

Change from rc1:

91421cb Fix compiler warning.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-19 17:36:02 +01:00
Hans Dedecker
15a59e3e08 iproute2: install ip-tiny and ip-full in /usr/libexec
Install the ip-tiny and ip-full variants in /usr/libexec as the suffixed
ip variants are not meant to be called directly

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-18 17:15:51 +02:00
Felix Fietkau
a91d82303c mt76: update to the latest version
b51337a mt76: clean up unused leftover EXPORT_SYMBOLs
383b228 mt76x0: reduce duplication in setting rf bandwidth parameters
a1a4528 mt76: mt76x0: handle chip specific initval differences
f473340 mt76: usb: fix static tracepoints
3a975b4 mt76x0: antenna select corrections
37c1150 mt76x0: init: simplify mt76x0_init_mac_registers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-18 16:29:25 +02:00
Jason A. Donenfeld
4653818dab wireguard: bump to 0.0.20181018
ba2ab5d version: bump snapshot
5f59c76 tools: wg-quick: wait for interface to disappear on freebsd
ac7e7a3 tools: don't fail if a netlink interface dump is inconsistent
8432585 main: get rid of unloaded debug message
139e57c tools: compile on gnu99
d65817c tools: use libc's endianness macro if no compiler macro
f985de2 global: give if statements brackets and other cleanups
b3a5d8a main: change module description
296d505 device: use textual error labels always
8bde328 allowedips: swap endianness early on
a650d49 timers: avoid using control statements in macro
db4dd93 allowedips: remove control statement from macro by rewriting
780a597 global: more nits
06b1236 global: rename struct wireguard_ to struct wg_
205dd46 netlink: do not stuff index into nla type
2c6b57b qemu: kill after 20 minutes
6f2953d compat: look in Kbuild and Makefile since they differ based on arch
a93d7e4 create-patch: blacklist instead of whitelist
8d53657 global: prefix functions used in callbacks with wg_
123f85c compat: don't output for grep errors

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2018-10-18 08:55:01 +02:00
Hans Dedecker
db6f9d5598 netifd: update to latest git HEAD
841b5d1 system-linux: enable by default ignore encaplimit for grev6 tunnels
125cbee system-linux: fix a typo in gre tunnel data parsing logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-17 11:18:30 +02:00
Hans Dedecker
3d015e971f gre: make encaplimit support configurable
Make inclusion of the destination option header containing the tunnel
encapsulation limit configurable for IPv6 GRE packets.
Setting the uci parameter encaplimit to ignore; allows to disable the
insertion of the destination option header in the IPv6 GRE packets.
Otherwise the tunnel encapsulation limit value can be set to a value
from 0 till 255 by setting the encaplimit uci parameter accordingly.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-17 11:18:20 +02:00
Kevin Darbyshire-Bryant
1063d904b7 hostapd: add basic variant
Add a basic variant which provides WPA-PSK only, 802.11r and 802.11w and
is intended to support 11r & 11w (subject to driver support) out of the
box.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 15:07:41 +01:00
Rosy Song
fd09e251e9 ppp: don't start ppp with IPv6 support if ipv6 is not supported
Signed-off-by: Rosy Song <rosysong@rosinson.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-16 14:31:45 +02:00
Felix Fietkau
202ac58ca2 mt76: update to the latest version, add mt76x0 firmware, enable mt76x0e
96fa353 mt76: do not store aggregation sequence number for null-data frames
c50dca8 mt76x0: print BBP version only for debug
ddc9e05 mt76x0: correct RF access via RF_CSR register.
02d2385 mt76: allow to identify bus
c438e67 mt76x0: correct RF reg pairs write for PCIe
c83abb8 mt76x0: use bus helper to identify rf access method
9c272ff mt76x0: phy: fix bank check in mt76x0_rf_csr_{wr,rr}
1945d57 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
214eab7 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
29bc2ae mt76: use mt76x02_dev instead of mt76_dev in mt76x02_util.c
08ecb5f mt76: use mt76x02_dev instead of mt76_dev in mt76x02_usb_mcu.c
fd9b2b0 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c
f37bd25 mt76: use mt76x02_dev instead of mt76_dev in mt76x02_txrx.c
48950cb mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
06276cc mt76x0: pci: report firmware version using ethtool
72546ed mt76x0: pci: add missing mac80211 callbacks
4de98cd mt76: disable ldpc coding for mt76x0 devices
f0951c2 mt76x0: pci: add mt76x0_register_device in mt76x0e_register_device
4f3685e mt76: reserve enough room for USB tx skbs
5e6907f mt76x0: remove dma.h
acfc5a9 mt76x0: pci: fix set external PA I/O current
2b79bb7 mt76: mt76x0e: another fix for the external PA current setting
8a0acfd mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc
e9e949b mt76x0: phy: remove channel parameter from mt76x0_phy_set_chan_bbp_params
1775717 mt76: move mt76x02_phy_set_bw in mt76x02-lib module
f82134f mt76: move mt76x02_phy_set_band in mt76x02-lib module
3eaa34f mt76x0: pci: rename mt76x0_phy_calibrate
7269fb4 mt76x0: pci: introduce mt76x0_phy_calirate routine
a514b75 mt76x0: phy: update set_channel for mt76x0e devices
62a1bc5 mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
a48481d mt76x0: phy: add phy/vco temperature compensation
cc34ce9 mt76: move rssi_gain_thresh routines in mt76x02-lib module
eaf9751 mt76: move mt76x02_phy_adjust_vga_gain in mt76/mt76x02_phy.c
2715e7c mt76: introduce mt76x02_init_agc_gain routine
87fcb31 mt76x0: phy: align channel gain logic to mt76x2 one
98f8ef7 mt76x0: phy: do not run calibration during channel switch
cf859ad mt76x2: align mt76x2 and mt76x2u firmware
1f3f767 mt76x2u: align channel gain logic to mt76x2 one
d1c1454 treewide: Replace more open-coded allocation size multiplications
bcbecd2 mt76x0: phy: use proper name convention
b6694e6 mt76x0: phy: simplify rf configuration routines
da129c9 mt76x0: phy: improve code readability in initvals_phy.h
eab7ab1 mt76x0: pci: add get_survey support
9e493f7 mt76: move mt76x02_mac_work routine in mt76x02-lib module
ecec6ba mt76: move mt76x02_debugfs in mt76x02-lib module
4f3b608 mt76x0: use shared debugfs implementation
6aae25b mt76x0: use mt76x02_mac_work as stats handler
b228a45 mt76x2u: introduce mac workqueue support
4671af4 mt76x0: phy: unify calibration between mt76x0u and mt76x0e
5ed28f3 mt76x0: do not perform MCU calibration for MT7630
9b844da add mt7610e firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-16 13:01:11 +02:00
Jo-Philipp Wich
3e633bb370 hostapd: fix MAC filter related log spam
Backport two upstream fixes to address overly verbose logging of MAC ACL
rejection messages.

Fixes: FS#1468
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-10-16 12:11:20 +02:00
Christian Lamparter
583466bb5b dnsmasq: fix dnsmasq failure to start when ujail'd
This patch fixes jailed dnsmasq running into the following issue:

|dnsmasq[1]: cannot read /usr/share/dnsmasq/dhcpbogushostname.conf: No such file or directory
|dnsmasq[1]: FAILED to start up
|procd: Instance dnsmasq::cfg01411c s in a crash loop 6 crashes, 0 seconds since last crash

Fixes: a45f4f50e1 ("dnsmasq: add dhcp-ignore-names support - CERT VU#598349")

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[bump package release]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 10:39:59 +01:00
Kevin Darbyshire-Bryant
b8bc672f24 dnsmasq: bump to v2.80rc1
53792c9 fix typo
df07182 Update German translation.

Remove local patch 001-fix-typo which is a backport of the above 53792c9

There is no practical difference between our test8 release and this rc
release, but this does at least say 'release candidate'

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-16 08:39:21 +01:00
Hans Dedecker
39e5e17045 dnsmasq: fix compile issue
Fix compile issue in case HAVE_BROKEN_RTC is enabled

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-15 13:42:55 +02:00
Daniel Golle
ed0d5a1e60 wolfssl: update to version 3.15.3-stable
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-10-15 08:41:02 +02:00
Felix Fietkau
055fb0ba83 mt76: move mt76x2e firmware to kmod-mt76x2-common and use it for mt76x2u
USB and PCIe devices can run the same firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-14 18:47:44 +02:00
Hauke Mehrtens
4c3fae4adc hostapd: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)
This adds support for the WPA3-Enterprise mode authentication.

The settings for the WPA3-Enterpriese mode are defined in
WPA3_Specification_v1.0.pdf. This mode also requires ieee80211w and
guarantees at least 192 bit of security.

This does not increase the ipkg size by a significant size.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:15 +02:00
Hauke Mehrtens
18c6c93a3b hostapd: Activate Opportunistic Wireless Encryption (OWE)
OWE is defined in RFC 8110 and provides encryption and forward security
for open networks.

This is based on the requirements in the Wifi alliance document
Opportunistic_Wireless_Encryption_Specification_v1.0_0.pdf
The wifi alliance requires ieee80211w for the OWE mode.
This also makes it possible to configure the OWE transission mode which
allows it operate an open and an OWE BSSID in parallel and the client
should only show one network.

This increases the ipkg size by 5.800 Bytes.
Old: 402.541 Bytes
New: 408.341 Bytes

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:15 +02:00
Hauke Mehrtens
4a009a16d2 hostapd: Activate Simultaneous Authentication of Equals (SAE)
This build the full openssl and wolfssl versions with SAE support which
is the main part of WPA3 PSK.

This needs elliptic curve cryptography which is only provided by these
two external cryptographic libraries and not by the internal
implementation.

The WPA3_Specification_v1.0.pdf file says that in SAE only mode
Protected Management Frames (PMF) is required, in mixed mode with
WPA2-PSK PMF should be required for clients using SAE, and optional for
clients using WPA2-PSK. The defaults are set now accordingly.

This increases the ipkg size by 8.515 Bytes.
Old: 394.026 Bytes
New: 402.541 Bytes

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:15 +02:00
Hauke Mehrtens
a1ad1144b6 hostapd: SAE: Do not ignore option sae_require_mfp
This patch was send for integration into the hostapd project.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:14 +02:00
Hauke Mehrtens
779773a0de hostapd: backport build fix when OWE is activated
This backports a compile fix form the hostapd project.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:14 +02:00
Hauke Mehrtens
4b93b03577 hostapd: sync config with default configuration
This replaces the configuration files with the versions from the hostapd
project and the adaptions done by OpenWrt.

The resulting binaries should be the same.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:14 +02:00
Hauke Mehrtens
8f7a2bd084 netifd: update to latest git HEAD
22476ff wireless: Add Simultaneous Authentication of Equals (SAE)
c6c3a0d wireless: Add Opportunistic Wireless Encryption (OWE)
a117e41 wireless: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-10-14 13:57:08 +02:00
Florian Eckert
71865200c9 uqmi: fix variable initilization for timeout handling
Also add logging output for SIM initilization.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-12 09:36:05 +02:00
Felix Fietkau
e220ffb533 mac80211: fix A-MSDU packet handling with TCP retransmission
Improves local TCP throughput and fixes use-after-free bugs that could lead
to crashes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-11 18:42:54 +02:00
Robert Marko
b1ab8fac5a ath10k-ct: Update to 29-09-2018
Update ath10k-ct to be able to drop 210-ath10k-fix-recent-bandwidth-conversion-bug.patch
as its upstream.

b9989fbd5d6e ath10k-ct: Add upstream patch to fix peer rate reporting.
ac9224344dbf ath10k-ct: Support sending custom frames with no-ack flag.
bc938bc2021e ath10k-ct: Support sending pkts with specific rate on 10.4 firmware.

Runtime tested on:
- GL-iNet GL-B1300
- Mikrotik RB912 + QCA9882

Signed-off-by: Robert Marko <robimarko@gmail.com>
[Added list of all changes from previous version + add own test device]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-11 12:52:27 +02:00
Florian Eckert
4cabda8b7d uqmi: update PKG_RELEASE version
update PKG_RELEASE

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
0c9d06b5b2 uqmi: stop proto handler if verify pin count is not 3
Check pin count value from pin status and stop verification the pin if
the value is less then 3. This should prevent the proto-handler to
lock the SIM. If SIM is locked then the PUK is needed.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
4b80bd878d uqmi: evaluate pin-status output in qmi_setup function
Load the json output from uqmi --get-pin-status command and evaluate the
"pin1_status" value.

The following uqmi "pin1_status" values are evaluated:

- disabled
  Do not verify PIN because SIM verification is disabled on this SIM

- blocked
  Stop qmi_setup because SIM is locked and a PUK is required

- not_verified
  SIM is not yet verified. Do a uqmi --verify-pin1 command if a SIM is
  specified

- verified:
  Do not verify the PIN because this was already done before

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
f171a86d06 uqmi: do not block proto handler if SIM is uninitialized
QMI proto setup-handler will wait forever if SIM does not get initialized.
To fix this stop polling pin status and notify netifd. Netifd will generate
then a "ifup-failed" ACTION.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
dec1bfa0f4 uqmi: do not block proto handler if modem is unable to registrate
QMI proto setup-handler will wait forever if it is unable to registrate to
the mobile network. To fix this stop polling network registration status
and notify netifd. Netifd will generate then a "ifup-failed" ACTION.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
dee93def39 uqmi: add timeout option value
This value will be used for now during following situations:
* Ask the sim with the uqmi --get-pin-status command.
* Wait for network registration with the uqmi --get-serving-system command.

This two commands wait forever in a while loop. Add a timeout to stop
waiting and so inform netifd.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
2d57aa9c4c uqmi: redirect uqmi commands output to /dev/null
Move uqmi std and error output on commands without using them to /dev/null.
This will remove useless outputs in the syslog.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
Florian Eckert
692c6d9a5d uqmi: fix indenting
fix indenting

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2018-10-11 12:18:16 +02:00
John Crispin
d24bdaa794 procd: update to latest git HEAD
94944ab procd: Add cpu string to board detection

Signed-off-by: John Crispin <john@phrozen.org>
2018-10-11 08:42:52 +02:00
John Crispin
3e8ef61c01 package/: fix $(PROJECT_GIT) usage
Signed-off-by: John Crispin <john@phrozen.org>
2018-10-11 08:42:52 +02:00
Rosen Penev
82d272efed procd: Install hotplug files as 600
procd runs as root, so it only makes sense that its files are restricted.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:43 +02:00
Rosen Penev
4572d996a4 linux-atm: Install hotplug file as 600
The hotplug files is only used by procd, which runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:35 +02:00
Rosen Penev
c7144ec688 comgt: Install hotplug and netifd files as 600
procd and netifd both run as root. These files are not used elsewhere.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:28 +02:00
Rosen Penev
f5ddbd695b samba36: Install several config files as 600
Hotplug is managed by procd, which runs as root. The other files are used
by root as well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:18 +02:00
Rosen Penev
745c3acd64 soloscli: Install hotplug file as 600
Hotplug is managed by procd, which runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:09 +02:00
Rosen Penev
49065d227a firewall: Install config files as 600
None of the files in firewall are used by non-root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:05:41 +02:00
Koen Vandeputte
f4b7dfcc4b netfilter: add missing dependency for kernel 4.14
Since kernel 4.14.75 commit ("netfilter: xt_cluster: add dependency on conntrack module")
a dependency is required on kmod-nf-conntrack.

It seems this was already present for kmod-ipt-clusterip
but not yet for kmod-ipt-cluster

Add it fixing a build error when including kmod-ipt-cluster:

Package kmod-ipt-cluster is missing dependencies for the following libraries:
nf_conntrack.ko
modules/netfilter.mk:665: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk' failed
make[3]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/bin/targets/cns3xxx/generic/packages/kmod-ipt-cluster_4.14.75-1_arm_mpcore_vfp.ipk] Error 1
make[3]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt/package/kernel/linux'
Command exited with non-zero status 2
time: package/kernel/linux/compile#1.80#0.05#2.07
package/Makefile:107: recipe for target 'package/kernel/linux/compile' failed
make[2]: *** [package/kernel/linux/compile] Error 2
make[2]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt'
package/Makefile:103: recipe for target '/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile' failed
make[1]: *** [/mnt/ramdisk/koen/firmware/builds/openwrt/staging_dir/target-arm_mpcore+vfp_musl_eabi/stamp/.package_compile] Error 2
make[1]: Leaving directory '/mnt/ramdisk/koen/firmware/builds/openwrt'
/mnt/ramdisk/koen/firmware/builds/openwrt/include/toplevel.mk:216: recipe for target 'world' failed
make: *** [world] Error 2

Fixes: f983956a8b ("kernel: bump 4.14 to 4.14.75")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.14.75&id=b969656b46626a674232c0eadf92a394b89df07c
2018-10-10 17:33:04 +02:00
Felix Fietkau
567fe53230 mt76: fix typo in kmod-mt76x0u package description
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-10-09 14:16:03 +02:00
Kevin Darbyshire-Bryant
a45f4f50e1 dnsmasq: add dhcp-ignore-names support - CERT VU#598349
dnsmasq v2.80test8 adds the ability to ignore dhcp client's requests for
specific hostnames.  Clients claiming certain hostnames and thus
claiming DNS namespace represent a potential security risk. e.g. a
malicious host could claim 'wpad' for itself and redirect other web
client requests to it for nefarious purpose. See CERT VU#598349 for more
details.

Some Samsung TVs are claiming the hostname 'localhost', it is believed
not (yet) for nefarious purposes.

/usr/share/dnsmasq/dhcpbogushostname.conf contains a list of hostnames
in correct syntax to be excluded. e.g.

dhcp-name-match=set:dhcp_bogus_hostname,localhost

Inclusion of this file is controlled by uci option dhcpbogushostname
which is enabled by default.

To be absolutely clear, DHCP leases to these requesting hosts are still
permitted, but they do NOT get to claim ownership of the hostname
itself and hence put into DNS for other hosts to be confused/manipulate by.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-09 09:45:16 +01:00
Kevin Darbyshire-Bryant
3925298f3c wireguard: bump to 0.0.20181007
64750c1 version: bump snapshot
f11a2b8 global: style nits
4b34b6a crypto: clean up remaining .h->.c
06d9fc8 allowedips: document additional nobs
c32b5f9 makefile: do more generic wildcard so as to avoid rename issues
20f48d8 crypto: use BIT(i) & bitmap instead of (bitmap >> i) & 1
b6e09f6 crypto: disable broken implementations in selftests
fd50f77 compat: clang cannot handle __builtin_constant_p
bddaca7 compat: make asm/simd.h conditional on its existence
b4ba33e compat: account for ancient ARM assembler

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-09 09:11:58 +01:00
Hans Dedecker
16c712501c e2fsprogs: fix glibc compile issue (FS#1749,FS#1796)
Fixes the following build error:

.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_post’
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_wait'
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_init’
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_destroy’

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-08 17:24:23 +02:00
Julian Haupt
0308385d1d sunxi: add support for Orange Pi Zero
Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
2018-10-07 22:16:10 +02:00
Rosy Song
0fa1dd71cc fstools: filter unknown action in mount.hotplug script
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-10-07 21:34:13 +02:00
Hans Dedecker
ec9576607d busybox: fix IPv6 dependency
Commit 9f0cb135dd made BUSYBOX_CONFIG_FEATURE_IPV6 dependant on IPV6 but
did not make its default value BUSYBOX_DEFAULT_FEATURE_IPV6 dependant
on IPV6. BUSYBOX_DEFAULT_FEATURE_IPV6 will have as default value y if
IPV6 is enabled otherwise n.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-07 20:46:51 +02:00
Kevin Darbyshire-Bryant
30cc5b0bf4 dnsmasq: bump to v2.80test8
e1791f3 Fix logging of DNSSEC queries in TCP mode. Destination server address was misleading.
0fdf3c1 Fix dhcp-match-name to match hostname, not complete FQDN.
ee1df06 Tweak strategy for confirming SLAAC addresses.
1e87eba Clarify manpage for --auth-sec-servers
0893347 Make interface spec optional in --auth-server.
7cbf497 Example config file fix for CERT Vulnerability VU#598349.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-10-07 16:42:12 +01:00
Hans Dedecker
329f2d5457 nghttp2: bump to 1.34.0
2b085815 (tag: v1.34.0) Update manual pages
986fa302 Bump up version number to 1.34.0, LT revision to 31:1:17
7c8cb3a0 nghttpx: Improve CONNECT response status handling
334c439c Fix bug that regular CONNECT does not work
6700626c Rule out content-length in the successful response to CONNECT
15162add Update manual pages
93270777 Merge pull request #1235 from nghttp2/backend-conn-timeout
aeb92bbb nghttpx: Add read/write-timeout parameters to backend option
fc7489e0 nghttpx: Fix mruby parameter validation
87ac872f nghttpx: Update doc
c278adde nghttpx: Log error when mruby file cannot be opened
f94d7209 Merge pull request #1234 from nghttp2/nghttpx-rfc8441
9b9baa6b Update doc
02566ee3 nghttpx: Update doc
3002f31b src: Add debug output for SETTINGS_ENABLE_CONNECT_PROTOCOL
d2a594a7 nghttpx: Implement RFC 8441 Bootstrapping WebSocket with HTTP/2
651e1477 Allow client sending :protocol optimistically
a42faf1c nghttpx: Write TLS alert during handshake
4aac05e1 Merge pull request #1231 from nghttp2/ws-lib-only
b80dfaa8 Adjustment for RFC 8441
a19d8f5d Deal with :protocol pseudo header
33f6e90a Add NGHTTP2_TOKEN__PROTOCOL
ed7fabcb Add SETTINGS_ENABLE_CONNECT_PROTOCOL
8753b6da Update doc
f2de733b Update neverbleed to fix OpenSSL 1.1.1 issues
88ff8c69 Update mruby 1.4.1
a63558a1 nghttpx: Call OCSP_response_get1_basic only when OCSP status is successful
3575a132 nghttpx: Fix crash with plain text HTTP
e2de2fee Update bash_completion
9f415979 Update manual pages
4bfc0cd1 Merge pull request #1230 from nghttp2/nghttpx-faster-logging
9c824b87 nghttpx: Get rid of std::stringstream from Log
a1ea1696 Make VALID_HD_NAME_CHARS and VALID_HD_VALUE_CHARS const qualified
dfc0f248 Make static_table const qualified
ed7c9db2 nghttpx: Add mruby env.tls_handshake_finished
5b42815a nghttpx: Strip incoming Early-Data header field by default
cfe7fa9a nghttpx: Add --tls13-ciphers and --tls-client-ciphers options
cb8a9d58 src: Remove TLSv1.3 ciphers from DEFAULT_CIPHER_LIST
023b9448 Merge branch 'tls13-early-data'
9b03c64f nghttpx: Should postpone early data by default
b8eccec6 nghttpx: Disable OpenSSL anti-replay
9f212587 Specify SSL_CTX_set_max_early_data and add an option to change max value
47f60124 nghttpx: Add an option to postpone early data processing
770e44de Implement draft-ietf-httpbis-replay-02
2ab319c1 Don't hide error code from openssl
39923024 Remove SSL_ERROR_WANT_WRITE handling
b30f312a Honor SSL_read semantics
c5cdb78a nghttpx: Add TLSv1.3 0-RTT early data support
f79a5812 Bump up version number to 1.34.0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-10-07 17:39:05 +02:00
Rafał Miłecki
87cd118794 iperf: fix --daemon option
Support for -D got broken in the 2.0.11 release by the upstream commit
218d8c667944 ("first pass L2 mode w/UDP checks, v4 only"). After that
commit clients were still able to connect but no traffic was passed.
It was reported and is fixed now in the upstream git repository.

Backport two patches to fix this. The first one is just a requirement
for the later to apply. The second one is the real fix and it needed
only a small adjustment to apply without backporing the commit
10887b59c7e7 ("fix --txstart-time report messages").

Fixes: 457e6d5a27 ("iperf: bump to 2.0.12")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-10-07 17:13:39 +02:00