Commit graph

2711 commits

Author SHA1 Message Date
John Crispin
d1587fb4aa ar71xx: assign proper GPIO pin for Ubiquiti Nanostation models
The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
following:
* Ubiquiti Nanostation M XM: Pin 8
* Ubiquiti Nanostation M XW: Pin 2

The previous definition of the pins was mixed up between XM and XW model.

Signed-off-by: Lars Kruse <lists@sumpfralle.de>

SVN-Revision: 46922
2015-09-14 20:09:40 +00:00
Hauke Mehrtens
e1ec8b76e9 ar71xx: fix build of lzma-loader with binutils 2.25.1
To make the lzma-loader build with binutils 2.25.1 it is needed to
remove the .MIPS.abiflags section otherwise I get the following compile
error:

mips-openwrt-linux-musl-objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S loader loader.bin
mips-openwrt-linux-musl-objcopy: Warning: Writing section `.text' to huge (ie negative) file offset 0xffffffff80a00000.
mips-openwrt-linux-musl-objcopy:loader.bin[.text]: File truncated

This should close #20487.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46893
2015-09-12 18:57:37 +00:00
Hauke Mehrtens
89ce027c08 kernel: add CONFIG_MIPS_CDMM config option
This driver was added in kernel 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46881
2015-09-11 20:31:32 +00:00
Felix Fietkau
542ee6ed19 ar71xx: Restore buildability of the AP121 target
Increase space for kernel and also introduce a 8M flash target into the
Makefile.

Signed-off-by: Attila Lendvai <attila@lendvai.name>

SVN-Revision: 46862
2015-09-11 16:34:08 +00:00
Felix Fietkau
bc4f2c5ce4 ar71xx: fix ar724x clock calculation
According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.

The correct CPU PLL calculation procedure is as follows:
CPU_PLL = (DIV * REF_CLK) / REF_DIV / 2.

This patch is compatible with the current calculation procedure with default
DIV and REF_DIV values.

Test on both AR7240, AR7241 and AR7242.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 46856
2015-09-11 16:32:45 +00:00
Felix Fietkau
2ce833060a target: ar71xx: add support for COMFAST CF-E316N v2 board
This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 46852
2015-09-11 16:31:35 +00:00
Jonas Gorski
b958c12d2c image: move netgear-image to top and rename to -dni
Use the same naming as netgear-chk.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46791
2015-09-04 14:45:09 +00:00
Jonas Gorski
156a25b9c4 ar71xx: rename NETGEAR_ variables to their netgear names
Netgear names them BOARD_ID and HW_ID, so we should do the same.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46790
2015-09-04 14:45:04 +00:00
Jonas Gorski
2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
John Crispin
af60c367b7 ar71xx: add support for TP-Link TL-WDR6500 v2
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds support for TP-Link TL-WDR6500 v2.

The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for
the whole firmware, so I have to create a new firmware creation method.

SVN-Revision: 46663
2015-08-17 06:24:04 +00:00
John Crispin
a2b38ebf77 ar71xx: add 64kb bootloader mtd parser for tplinkpart
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds flash layout parser for TP-Link firmwares which have a 64kb
bootloader.

This is used for TP-Link TL-WDR6500 v2.

SVN-Revision: 46662
2015-08-17 06:23:49 +00:00
John Crispin
4463bc017b ar71xx: Add support for Black Swift
Add support for the Black Swift board:
http://www.black-swift.com/

Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46651
2015-08-17 06:16:54 +00:00
Jonas Gorski
bed330204a image.mk: move KDIR_TMP definition to a central location
Instead of each target defining it the same, move the KDIR_TMP
definition to include/image.mk. In addition Image/Build/SysupgradeNAND
already requires KDIR_TMP to be set, so it makes sense to have it
globally defined.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46592
2015-08-14 10:20:53 +00:00
Hauke Mehrtens
124e4368cd ar71xx: export some clock functions used by some modules
This fixes this linking problem:

ERROR: "clk_set_rate" [drivers/usb/phy/phy-generic.ko] undefined!
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!
ERROR: "clk_set_rate" [drivers/media/v4l2-core/videodev.ko] undefined!

In the upstream kernel it is fixed here:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=411520af8ec9456886359b42628e583ac58e7e44

This closes: #20162, #20172, #20196, #20197, #20202 and #20308

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46572
2015-08-09 12:36:24 +00:00
Jonas Gorski
dbe4173b20 image: fix jffs2(_nand) image generation
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.

Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46564
2015-08-05 13:55:52 +00:00
Jonas Gorski
caa73eb95c kernel: update 4.1 to 4.1.4
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[jogo: fix brcm2708 patches, refresh target patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46560
2015-08-05 13:55:14 +00:00
Felix Fietkau
991e641a76 ar71xx: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46553
2015-08-04 23:09:28 +00:00
Felix Fietkau
4dc128e51d ar71xx: Fix gpio_count setting for QCA953x in ath79_gpio_output_select
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46547
2015-08-02 15:30:35 +00:00
Felix Fietkau
320aa30609 ar71xx: fix lzma-loader kernel command line passing
The generic kernel cmdline parser ignores argv[0], this caused a
regression for all lzma-loader based boards with linux 4.1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46544
2015-08-02 15:06:54 +00:00
Felix Fietkau
9c59b3035f ar71xx: fix mr3220 device profile (#19990)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46541
2015-08-01 15:13:10 +00:00
Felix Fietkau
bc0f9ad8ca kernel: fix oprofile performance counter interrupt handling on mips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46482
2015-07-24 15:36:02 +00:00
John Crispin
889afbca2e ar71xx: Allow to use ath79_gpio_output_select on QCA955x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46459
2015-07-24 09:10:00 +00:00
John Crispin
5cd49bb067 ar71xx: add support for Onion Omega
This patch adds support for the Onion Omega.

https://onion.io/omega

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>

SVN-Revision: 46458
2015-07-24 09:09:49 +00:00
John Crispin
b98205c946 ar71xx: Add support for AP147-010 reference board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46457
2015-07-24 09:09:42 +00:00
John Crispin
42c37d4381 ar71xx: Add support for PCIe on QCA953x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46456
2015-07-24 09:09:31 +00:00
John Crispin
85c7f3fb29 ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2
There are a few NETGEAR devices which don't terminate the model name in the
ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk
expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of
trailing 0xFF garbage in this case.

Fix this by matching for the first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46455
2015-07-24 09:09:27 +00:00
Jonas Gorski
2911b5aa11 kernel: update 3.18 to 3.18.19
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46439
2015-07-22 12:50:59 +00:00
Felix Fietkau
82b1517da2 ar71xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46438
2015-07-22 12:45:12 +00:00
Felix Fietkau
54f5f6fa6c kernel: update to linux 4.1.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46437
2015-07-22 12:45:07 +00:00
Felix Fietkau
38dbf49b61 ar71xx: remove the use of the obsolete IRQF_DISABLED flag in the NAND flash driver (fixes #20125)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46433
2015-07-20 06:01:18 +00:00
Felix Fietkau
d6e67327a2 ar71xx: switch to linux 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46432
2015-07-19 17:59:20 +00:00
Felix Fietkau
91791aea2e ar71xx: add missing patch chunk to 4.1 unaligned access hacks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46431
2015-07-19 17:59:15 +00:00
Felix Fietkau
b704d3c96e ar71xx: reorganize 4.1 patch directory layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46430
2015-07-19 17:59:08 +00:00
Felix Fietkau
573d23dda3 ar71xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46429
2015-07-19 17:59:00 +00:00
Felix Fietkau
2a74944f07 ar71xx: refresh 4.1 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46427
2015-07-19 17:58:46 +00:00
Felix Fietkau
78b1a6b773 ar71xx: add 4.1 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46426
2015-07-19 17:58:40 +00:00
Felix Fietkau
d26e8d9439 Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)
The commit is incomplete, it does not even build the mach-* file

This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574

SVN-Revision: 46425
2015-07-19 17:58:27 +00:00
John Crispin
c89f360059 ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working
on these devices. This adds them to the calibration data loading introduced in
r46244 and thus makes 5GHz work again for these devices.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46415
2015-07-18 21:15:42 +00:00
John Crispin
2d955b51fe ar71xx: use automatic firmware partition splitting for devolo dLAN devices
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46414
2015-07-18 21:15:36 +00:00
John Crispin
096b3759a9 build: Prevent more gzip timestamps
To improve reproducibility, prevent the inclusion of timestamps
in the gzip header.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 46361
2015-07-14 09:57:45 +00:00
John Crispin
1eccdb4fd4 ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46342
2015-07-14 07:37:03 +00:00
John Crispin
052f21de3b ar71xx: add support to use gpio irqs
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46339
2015-07-14 07:34:31 +00:00
John Crispin
02984a6e09 ar71xx: add support for the devolo dLAN pro 500 Wireless+
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46338
2015-07-14 07:32:33 +00:00
Hauke Mehrtens
29039f51b3 kernel: refresh patches on linux 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46308
2015-07-12 13:47:16 +00:00
John Crispin
e8161f4764 ar71xx: compex wpe72 add space to include statement
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46284
2015-07-09 07:04:14 +00:00
John Crispin
8a1cca04ca ar71xx: compex wpj531 register usb support
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46283
2015-07-09 07:03:54 +00:00
John Crispin
3802ce01a9 ar71xx: compex wpj531 fix setting mac address on ethernet
Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46282
2015-07-09 07:01:55 +00:00
John Crispin
4b28adc066 ar71xx: compex wpj531 fix ethernet registration
In fb6f62e97733312053ab593fcf68eea47a21169e several settings
are set on the ethernet device, but they are not working.

Fix Ethernet by setting the right values.

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46281
2015-07-09 06:59:18 +00:00
John Crispin
3b14473968 ar71xx: ag71xx remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46280
2015-07-09 06:57:39 +00:00
John Crispin
dc2c89c64c ar71xx: fix board name ordering
r46248 added case statements in the same places

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46274
2015-07-08 14:26:18 +00:00