ar71xx: reorganize 4.1 patch directory layout

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46430
This commit is contained in:
Felix Fietkau 2015-07-19 17:59:08 +00:00
parent 573d23dda3
commit b704d3c96e
35 changed files with 275 additions and 554 deletions

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -147,6 +147,8 @@ static void ar934x_wmac_setup(void)
@@ -140,6 +140,8 @@ static void ar934x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = false;
else
ath79_wmac_data.is_clk_25mhz = true;
@ -8,4 +8,4 @@
+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
}
static void qca953x_wmac_setup(void)
static void qca955x_wmac_setup(void)

View file

@ -10,7 +10,7 @@
if (cpu_wait)
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -144,6 +144,7 @@ static inline u32 ath79_pll_rr(unsigned
@@ -132,6 +132,7 @@ static inline u32 ath79_pll_rr(unsigned
static inline void ath79_reset_wr(unsigned reg, u32 val)
{
__raw_writel(val, ath79_reset_base + reg);

View file

@ -16,7 +16,7 @@
static struct ath9k_platform_data ath79_wmac_data;
static struct resource ath79_wmac_resources[] = {
@@ -160,7 +162,7 @@ static void qca955x_wmac_setup(void)
@@ -162,7 +164,7 @@ static void qca955x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = true;
}
@ -25,7 +25,7 @@
{
if (soc_is_ar913x())
ar913x_wmac_setup();
@@ -177,5 +179,10 @@ void __init ath79_register_wmac(u8 *cal_
@@ -179,5 +181,10 @@ void __init ath79_register_wmac(u8 *cal_
memcpy(ath79_wmac_data.eeprom_data, cal_data,
sizeof(ath79_wmac_data.eeprom_data));

View file

@ -27,7 +27,7 @@
+
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -143,4 +143,7 @@ static inline u32 ath79_reset_rr(unsigne
@@ -144,4 +144,7 @@ static inline u32 ath79_reset_rr(unsigne
void ath79_device_reset_set(u32 mask);
void ath79_device_reset_clear(u32 mask);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -142,6 +142,7 @@ static inline u32 ath79_reset_rr(unsigne
@@ -143,6 +143,7 @@ static inline u32 ath79_reset_rr(unsigne
void ath79_device_reset_set(u32 mask);
void ath79_device_reset_clear(u32 mask);

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -234,6 +234,8 @@ void __init plat_time_init(void)
@@ -235,6 +235,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_clk_rate / 2;
}

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -189,3 +189,9 @@ void __init ath79_register_wmac(u8 *cal_
@@ -191,3 +191,9 @@ void __init ath79_register_wmac(u8 *cal_
platform_device_register(&ath79_wmac_device);
}

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -165,6 +165,137 @@ static void qca955x_wmac_setup(void)
@@ -167,6 +167,137 @@ static void qca955x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = true;
}

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -296,6 +296,16 @@ bool __init ar93xx_wmac_read_mac_address
@@ -298,6 +298,16 @@ bool __init ar93xx_wmac_read_mac_address
return ret;
}

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -12,16 +12,24 @@
@@ -12,16 +12,26 @@
#include <linux/init.h>
#include <linux/pci.h>
@ -13,6 +13,8 @@
#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include "common.h"
#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
@ -26,7 +28,7 @@
#define UBNT_XM_GPIO_LED_L1 0
#define UBNT_XM_GPIO_LED_L2 1
@@ -37,19 +45,19 @@
@@ -37,19 +47,19 @@
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
{
@ -50,7 +52,7 @@
.gpio = UBNT_XM_GPIO_LED_L4,
.active_low = 0,
},
@@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g
@@ -66,9 +76,13 @@ static struct gpio_keys_button ubnt_xm_g
}
};
@ -64,7 +66,7 @@
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
ubnt_xm_leds_gpio);
@@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void)
@@ -79,9 +93,552 @@ static void __init ubnt_xm_init(void)
ath79_register_m25p80(NULL);
ap91_pci_init(eeprom, NULL);
@ -381,6 +383,40 @@
+ },
+};
+
+#define UBNT_ROCKET_TI_GPIO_LED_L1 16
+#define UBNT_ROCKET_TI_GPIO_LED_L2 17
+#define UBNT_ROCKET_TI_GPIO_LED_L3 18
+#define UBNT_ROCKET_TI_GPIO_LED_L4 19
+#define UBNT_ROCKET_TI_GPIO_LED_L5 20
+#define UBNT_ROCKET_TI_GPIO_LED_L6 21
+static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:link1",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link2",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link3",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link4",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L4,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link5",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L5,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link6",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L6,
+ .active_low = 0,
+ },
+};
+
+static void __init ubnt_xw_init(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
@ -426,12 +462,102 @@
+ ath79_register_eth(0);
+}
+
+static void __init ubnt_rocket_m_xw_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
+ ubnt_xw_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_mdio(0, ~BIT(4));
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
+static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 1,
+};
+static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 4,
+ .platform_data = &ubnt_rocket_m_ti_at803_data,
+ },
+};
+
+static void __init ubnt_rocket_m_ti_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio),
+ ubnt_rocket_ti_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ap91_pci_init(eeprom + 0x1000, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+ ath79_setup_ar934x_eth_rx_delay(3, 3);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ eeprom + UAP_PRO_MAC1_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info,
+ ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info));
+ ath79_register_mdio(0, 0x0);
+
+
+ ath79_eth0_data.phy_mask = BIT(4);
+ /* read out from vendor */
+ ath79_eth0_pll_data.pll_1000 = 0x2000000;
+ ath79_eth0_pll_data.pll_10 = 0x1313;
+ ath79_register_eth(0);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_eth1_data.phy_mask = BIT(3);
+ ath79_register_eth(1);
+}
+
+
+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
+ ubnt_nano_m_xw_setup);
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
+ ubnt_loco_m_xw_setup);
+
+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
+ ubnt_rocket_m_xw_setup);
+
+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
+ ubnt_rocket_m_ti_setup);
+
+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
+ {
+ .name = "ubnt:blue:wlan",
@ -515,7 +641,7 @@
Ubiquiti Networks XM (rev 1.0) board.
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -22,6 +22,13 @@ enum ath79_mach_type {
@@ -22,6 +22,15 @@ enum ath79_mach_type {
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
@ -523,6 +649,8 @@
+ ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
+ ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/
+ ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI*/
+ ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
+ ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
+ ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/dev-wmac.c
+++ b/arch/mips/ath79/dev-wmac.c
@@ -306,6 +306,11 @@ void __init ath79_wmac_disable_5ghz(void
@@ -308,6 +308,11 @@ void __init ath79_wmac_disable_5ghz(void
ath79_wmac_data.disable_5ghz = true;
}

View file

@ -12,7 +12,7 @@
#include "dev-wmac.h"
static u8 ath79_wmac_mac[ETH_ALEN];
@@ -311,6 +313,51 @@ void __init ath79_wmac_set_tx_gain_buffa
@@ -313,6 +315,51 @@ void __init ath79_wmac_set_tx_gain_buffa
ath79_wmac_data.tx_gain_buffalo = true;
}

View file

@ -22,7 +22,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1229,6 +1229,10 @@ config SOC_AR934X
@@ -105,6 +105,10 @@ config SOC_AR934X
select PCI_AR724X if PCI
def_bool n
@ -33,7 +33,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
config SOC_QCA955X
select HW_HAS_PCI
select PCI_AR724X if PCI
@@ -1271,7 +1275,7 @@ config ATH79_DEV_USB
@@ -144,7 +148,7 @@ config ATH79_DEV_USB
def_bool n
config ATH79_DEV_WMAC
@ -237,8 +237,8 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
ath79_wmac_data.external_reset = ar933x_wmac_reset;
}
@@ -149,6 +149,26 @@ static void ar934x_wmac_setup(void)
ath79_wmac_data.is_clk_25mhz = true;
@@ -151,6 +151,26 @@ static void ar934x_wmac_setup(void)
ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
}
+static void qca953x_wmac_setup(void)
@ -264,7 +264,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
static void qca955x_wmac_setup(void)
{
u32 t;
@@ -366,6 +386,8 @@ void __init ath79_register_wmac(u8 *cal_
@@ -368,6 +388,8 @@ void __init ath79_register_wmac(u8 *cal_
ar933x_wmac_setup();
else if (soc_is_ar934x())
ar934x_wmac_setup();
@ -405,7 +405,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
}
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -59,6 +59,7 @@ static void __init ath79_detect_sys_type
@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type
u32 major;
u32 minor;
u32 rev = 0;
@ -413,7 +413,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
major = id & REV_ID_MAJOR_MASK;
@@ -151,6 +152,16 @@ static void __init ath79_detect_sys_type
@@ -152,6 +153,16 @@ static void __init ath79_detect_sys_type
rev = id & AR934X_REV_ID_REVISION_MASK;
break;
@ -430,7 +430,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
case REV_ID_MAJOR_QCA9556:
ath79_soc = ATH79_SOC_QCA9556;
chip = "9556";
@@ -169,7 +180,7 @@ static void __init ath79_detect_sys_type
@@ -170,7 +181,7 @@ static void __init ath79_detect_sys_type
ath79_soc_rev = rev;

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1249,6 +1249,12 @@ config SOC_QCA955X
@@ -114,6 +114,12 @@ config SOC_QCA955X
select PCI_AR724X if PCI
def_bool n
@ -13,7 +13,7 @@
config ATH79_DEV_M25P80
select ATH79_DEV_SPI
def_bool n
@@ -1286,7 +1292,7 @@ config ATH79_DEV_USB
@@ -148,7 +154,7 @@ config ATH79_DEV_USB
def_bool n
config ATH79_DEV_WMAC

View file

@ -10,7 +10,7 @@
#endif /* __ATH79_COMMON_H */
--- a/arch/mips/ath79/gpio.c
+++ b/arch/mips/ath79/gpio.c
@@ -142,6 +142,30 @@ static int ar934x_gpio_direction_output(
@@ -130,6 +130,30 @@ static int ar934x_gpio_direction_output(
return 0;
}

View file

@ -29,7 +29,7 @@
static void __ath79_gpio_set_value(unsigned gpio, int value)
{
void __iomem *base = ath79_gpio_base;
@@ -209,6 +221,132 @@ void __init ath79_gpio_output_select(uns
@@ -233,6 +245,132 @@ void __init ath79_gpio_output_select(uns
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
}
@ -162,7 +162,7 @@
void __init ath79_gpio_init(void)
{
int err;
@@ -245,6 +383,10 @@ void __init ath79_gpio_init(void)
@@ -269,6 +407,10 @@ void __init ath79_gpio_init(void)
err = gpiochip_add(&ath79_gpio_chip);
if (err)
panic("cannot add AR71xx GPIO chip, error=%d", err);
@ -173,7 +173,7 @@
}
int gpio_get_value(unsigned gpio)
@@ -267,14 +409,22 @@ EXPORT_SYMBOL(gpio_set_value);
@@ -291,14 +433,22 @@ EXPORT_SYMBOL(gpio_set_value);
int gpio_to_irq(unsigned gpio)
{

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,22 +16,195 @@
@@ -16,24 +16,206 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@ -9,6 +9,8 @@
+ ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
+ ATH79_MACH_ALL0305, /* Allnet ALL0305 */
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
+ ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
+ ATH79_MACH_ANTMINER_S3, /* Bitmain Antminer S3 */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
@ -16,6 +18,7 @@
ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
+ ATH79_MACH_AP143, /* Atheros AP143 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
+ ATH79_MACH_AP83, /* Atheros AP83 */
+ ATH79_MACH_AP96, /* Atheros AP96 */
@ -50,6 +53,7 @@
+ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
+ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
+ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
+ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
+ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
@ -58,6 +62,8 @@
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MR12, /* Cisco Meraki MR12 */
+ ATH79_MACH_MR16, /* Cisco Meraki MR16 */
+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
+ ATH79_MACH_MR600, /* OpenMesh MR600 */
+ ATH79_MACH_MR900, /* OpenMesh MR900 */
@ -74,6 +80,7 @@
+ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
+ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
+ ATH79_MACH_OM2P, /* OpenMesh OM2P */
+ ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */
+ ATH79_MACH_OM5P, /* OpenMesh OM5P */
+ ATH79_MACH_PB42, /* Atheros PB42 */
+ ATH79_MACH_PB92, /* Atheros PB92 */
@ -93,6 +100,7 @@
+ ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
+ ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
+ ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
+ ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */
+ ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
+ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
+ ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
@ -107,6 +115,7 @@
+ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
+ ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
+ ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
+ ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/
+ ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
+ ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
+ ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */
@ -157,6 +166,8 @@
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
+ ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/
ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI*/
+ ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
+ ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
@ -198,7 +209,7 @@
#endif /* _ATH79_MACHTYPE_H */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -2,6 +2,70 @@ if ATH79
@@ -2,6 +2,90 @@ if ATH79
menu "Atheros AR71XX/AR724X/AR913X machine selection"
@ -256,6 +267,26 @@
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
+config ATH79_MACH_ANTMINER_S1
+ bool "Bitmain Antminer S1 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_ANTMINER_S3
+ bool "Bitmain Antminer S3 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
@ -269,7 +300,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
@@ -11,62 +75,1031 @@ config ATH79_MACH_AP121
@@ -11,62 +95,1097 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@ -305,6 +336,20 @@
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP136 or AP135 reference boards.
+
+config ATH79_MACH_AP143
+ bool "Atheros AP143 reference board"
+ select SOC_QCA953X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_ETH
+ select ATH79_DEV_M25P80
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP143 reference board.
+
+config ATH79_MACH_AP81
+ bool "Atheros AP81 reference board"
+ select SOC_AR913X
@ -397,6 +442,17 @@
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_EPG5000
+ bool "EnGenius EPG5000 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
+config ATH79_MACH_ESR1750
+ bool "EnGenius ESR1750 board support"
+ select SOC_QCA955X
@ -780,6 +836,16 @@
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MC_MAC1200R
+ bool "MERCURY MAC1200R board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_RB4XX
+ bool "MikroTik RouterBOARD 4xx series support"
+ select SOC_AR71XX
@ -805,6 +871,16 @@
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+
+config ATH79_MACH_RB922
+ bool "MikroTik RouterBOARD 922 support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+ select RLE_DECOMPRESS
+
+config ATH79_MACH_RB95X
+ bool "MikroTik RouterBOARD 95X support"
+ select SOC_AR934X
@ -923,6 +999,27 @@
+config ATH79_MACH_OM5P
+ bool "OpenMesh OM5P board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR12
+ bool "Meraki MR12 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR16
+ bool "Meraki MR16 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
@ -1329,7 +1426,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
@@ -83,6 +1116,97 @@ config ATH79_MACH_UBNT_XM
@@ -83,6 +1202,97 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@ -1427,7 +1524,7 @@
endmenu
config SOC_AR71XX
@@ -124,7 +1248,10 @@ config ATH79_DEV_DSA
@@ -134,7 +1344,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@ -1439,7 +1536,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -154,6 +1281,11 @@ config ATH79_PCI_ATH9K_FIXUP
@@ -164,6 +1377,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
@ -1453,7 +1550,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -38,9 +38,124 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
@@ -38,9 +38,132 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@ -1461,10 +1558,13 @@
+obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
+obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
+obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
+obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
+obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
+obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
+obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
@ -1491,6 +1591,7 @@
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
+obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
+obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
+obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
+obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
+obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
@ -1499,6 +1600,9 @@
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
+obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
+obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
+obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o
+obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
+obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
+obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
@ -1517,6 +1621,7 @@
+obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
+obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
+obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o
+obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
+obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
+obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
@ -1580,7 +1685,7 @@
+obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -130,6 +130,12 @@ void __init prom_init(void)
@@ -130,6 +130,13 @@ void __init prom_init(void)
initrd_end = initrd_start + fw_getenvl("initrd_size");
}
#endif
@ -1588,7 +1693,8 @@
+ if (strstr(arcs_cmdline, "board=750Gr3") ||
+ strstr(arcs_cmdline, "board=951G") ||
+ strstr(arcs_cmdline, "board=2011L") ||
+ strstr(arcs_cmdline, "board=711Gr100"))
+ strstr(arcs_cmdline, "board=711Gr100") ||
+ strstr(arcs_cmdline, "board=922gs"))
+ ath79_prom_append_cmdline("console", "ttyS0,115200");
}

View file

@ -1,40 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -196,6 +196,17 @@ config ATH79_MACH_F9K1115V2
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_EPG5000
+ bool "EnGenius EPG5000 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
config ATH79_MACH_ESR1750
bool "EnGenius ESR1750 board support"
select SOC_QCA955X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_ATH79_MACH_EAP300V2) += mac
obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
+obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -62,6 +62,7 @@ enum ath79_mach_type {
ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
+ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */

View file

@ -1,39 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -590,6 +590,16 @@ config ATH79_MACH_R6100
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_MC_MAC1200R
+ bool "MERCURY MAC1200R board support"
+ select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_RB4XX
bool "MikroTik RouterBOARD 4xx series support"
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) +
obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -120,6 +120,7 @@ enum ath79_mach_type {
ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
+ ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/
ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */

View file

@ -1,20 +0,0 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -87,6 +87,7 @@ enum ath79_mach_type {
ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
ATH79_MACH_OM2P, /* OpenMesh OM2P */
+ ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */
ATH79_MACH_OM5P, /* OpenMesh OM5P */
ATH79_MACH_PB42, /* Atheros PB42 */
ATH79_MACH_PB92, /* Atheros PB92 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -743,6 +743,7 @@ config ATH79_MACH_OM2P
config ATH79_MACH_OM5P
bool "OpenMesh OM5P board support"
select SOC_AR934X
+ select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO

View file

@ -1,51 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -750,6 +750,26 @@ config ATH79_MACH_OM5P
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_MR12
+ bool "Meraki MR12 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_MR16
+ bool "Meraki MR16 board support"
+ select SOC_AR71XX
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_MR600
bool "OpenMesh MR600 board support"
select SOC_AR934X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -82,6 +82,8 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) += mach
obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
+obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
+obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o
obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -71,6 +71,8 @@ enum ath79_mach_type {
ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
+ ATH79_MACH_MR12, /* Cisco Meraki MR12 */
+ ATH79_MACH_MR16, /* Cisco Meraki MR16 */
ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
ATH79_MACH_MR600, /* OpenMesh MR600 */
ATH79_MACH_MR900, /* OpenMesh MR900 */

View file

@ -1,51 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -625,6 +625,16 @@ config ATH79_MACH_RB91X
select ATH79_DEV_USB
select ATH79_ROUTERBOOT
+config ATH79_MACH_RB922
+ bool "MikroTik RouterBOARD 922 support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_NFC
+ select ATH79_DEV_USB
+ select ATH79_ROUTERBOOT
+ select RLE_DECOMPRESS
+
config ATH79_MACH_RB95X
bool "MikroTik RouterBOARD 95X support"
select SOC_AR934X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_ATH79_MACH_R6100) += mach-
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
+obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o
obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -109,6 +109,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
+ ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
--- a/arch/mips/ath79/prom.c
+++ b/arch/mips/ath79/prom.c
@@ -134,7 +134,8 @@ void __init prom_init(void)
if (strstr(arcs_cmdline, "board=750Gr3") ||
strstr(arcs_cmdline, "board=951G") ||
strstr(arcs_cmdline, "board=2011L") ||
- strstr(arcs_cmdline, "board=711Gr100"))
+ strstr(arcs_cmdline, "board=711Gr100") ||
+ strstr(arcs_cmdline, "board=922gs"))
ath79_prom_append_cmdline("console", "ttyS0,115200");
}

View file

@ -1,43 +0,0 @@
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -104,6 +104,20 @@ config ATH79_MACH_AP136
Say 'Y' here if you want your kernel to support the
Atheros AP136 or AP135 reference boards.
+config ATH79_MACH_AP143
+ bool "Atheros AP143 reference board"
+ select SOC_QCA953X
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_ETH
+ select ATH79_DEV_M25P80
+ help
+ Say 'Y' here if you want your kernel to support the
+ Atheros AP143 reference board.
+
config ATH79_MACH_AP81
bool "Atheros AP81 reference board"
select SOC_AR913X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_ATH79_MACH_AP113) += mach-
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
+obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -28,6 +28,7 @@ enum ath79_mach_type {
ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
+ ATH79_MACH_AP143, /* Atheros AP143 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
ATH79_MACH_AP96, /* Atheros AP96 */

View file

@ -1,56 +0,0 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -176,6 +176,7 @@ enum ath79_mach_type {
ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
+ ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/
ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -449,12 +449,43 @@ static void __init ubnt_loco_m_xw_setup(
ath79_register_eth(0);
}
+static void __init ubnt_rocket_m_xw_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
+ ubnt_xw_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+ ath79_register_mdio(0, ~BIT(4));
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+}
+
MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
ubnt_nano_m_xw_setup);
MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
ubnt_loco_m_xw_setup);
+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
+ ubnt_rocket_m_xw_setup);
+
static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
{
.name = "ubnt:blue:wlan",

View file

@ -1,39 +0,0 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -21,6 +21,7 @@ enum ath79_mach_type {
ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
ATH79_MACH_ALL0305, /* Allnet ALL0305 */
ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
+ ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -56,6 +56,16 @@ config ATH79_MACH_ALL0315N
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+config ATH79_MACH_ANTMINER_S1
+ bool "Bitmain Antminer S1 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_AP113
bool "Atheros AP113 board support"
select SOC_AR724X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += ma
obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o

View file

@ -1,135 +0,0 @@
--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -21,6 +21,8 @@
#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/platform_data/phy-at803x.h>
+
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
@@ -404,6 +406,40 @@ static struct gpio_led ubnt_xw_leds_gpio
},
};
+#define UBNT_ROCKET_TI_GPIO_LED_L1 16
+#define UBNT_ROCKET_TI_GPIO_LED_L2 17
+#define UBNT_ROCKET_TI_GPIO_LED_L3 18
+#define UBNT_ROCKET_TI_GPIO_LED_L4 19
+#define UBNT_ROCKET_TI_GPIO_LED_L5 20
+#define UBNT_ROCKET_TI_GPIO_LED_L6 21
+static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:link1",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L1,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link2",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L2,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link3",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L3,
+ .active_low = 1,
+ }, {
+ .name = "ubnt:green:link4",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L4,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link5",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L5,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:link6",
+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L6,
+ .active_low = 0,
+ },
+};
+
static void __init ubnt_xw_init(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -477,6 +513,62 @@ static void __init ubnt_rocket_m_xw_setu
ath79_register_eth(0);
}
+static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 1,
+};
+static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 4,
+ .platform_data = &ubnt_rocket_m_ti_at803_data,
+ },
+};
+
+static void __init ubnt_rocket_m_ti_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio),
+ ubnt_rocket_ti_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_xm_gpio_keys),
+ ubnt_xm_gpio_keys);
+
+ ap91_pci_init(eeprom + 0x1000, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+ ath79_setup_ar934x_eth_rx_delay(3, 3);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UAP_PRO_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ eeprom + UAP_PRO_MAC1_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+ mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info,
+ ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info));
+ ath79_register_mdio(0, 0x0);
+
+
+ ath79_eth0_data.phy_mask = BIT(4);
+ /* read out from vendor */
+ ath79_eth0_pll_data.pll_1000 = 0x2000000;
+ ath79_eth0_pll_data.pll_10 = 0x1313;
+ ath79_register_eth(0);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_eth1_data.phy_mask = BIT(3);
+ ath79_register_eth(1);
+}
+
+
MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
ubnt_nano_m_xw_setup);
@@ -486,6 +578,9 @@ MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW,
MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
ubnt_rocket_m_xw_setup);
+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
+ ubnt_rocket_m_ti_setup);
+
static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
{
.name = "ubnt:blue:wlan",
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -178,6 +178,7 @@ enum ath79_mach_type {
ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW*/
+ ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI*/
ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */

View file

@ -1,39 +0,0 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -22,6 +22,7 @@ enum ath79_mach_type {
ATH79_MACH_ALL0305, /* Allnet ALL0305 */
ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
ATH79_MACH_ANTMINER_S1, /* Bitmain Antminer S1 */
+ ATH79_MACH_ANTMINER_S3, /* Bitmain Antminer S3 */
ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -66,6 +66,16 @@ config ATH79_MACH_ANTMINER_S1
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ANTMINER_S3
+ bool "Bitmain Antminer S3 support"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_AP113
bool "Atheros AP113 board support"
select SOC_AR724X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach
obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
+obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o