Commit graph

34983 commits

Author SHA1 Message Date
KeLei Liang
563e9d5e1b ar71xx: add WRTnode2Q support
Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
2016-06-06 14:58:11 +02:00
Felix Fietkau
754565a84b netifd: update to the latest version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-06 15:46:35 +02:00
Jo-Philipp Wich
699f7ecd15 x86: use sysfs DMI information to populate sysinfo
Use the DMI data available in sysfs to extract manufacturer and model info
and write it to /tmp/sysinfo/.

The data will be picked up by board_detect and can be used by e.g. LuCI to
display a more appropriate model description.

On an APU board the files will contain the following values:

    # cat /tmp/sysinfo/model
    PC Engines APU

    # cat /tmp/sysinfo/board_name
    pc-engines-apu

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:11 +02:00
Jo-Philipp Wich
b8b23e0e64 x86: enable DMI and DMI_SYSFS
Enable support for DMI decoding in the kernel so that we can access
manufacturer and model information via sysfs.

Also remove redundant per-subtarget DMI overrides and preset a few
previously unset symbols popping up due to the now enabled DMI support.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:03 +02:00
Dirk Neukirchen
bd657ec9ac mediatek: remove modules from Kernel config
most symbols should be in Kernel packages

depending on HW the removal of
CONFIG_REALTEK_PHY
and USB symbols might be wrong

compile tested only

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-05 23:23:57 +02:00
Waldemar Brodkorb
5d8ece87a4 util-linux: fix scanf fallback detection for uClibc-ng
uClibc-ng pretends to be GNU libc 2.2 and then a fallback
scanf check is tried, so that libmount is disabled
afterwards. Add a fix already suggested upstream.
Add librt dependency required for other apps, too.

Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-06-05 23:23:57 +02:00
Signed-off-by: Henryk Heisig
8ee30ade17 ipq806x: add diag.sh script
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-06-05 23:23:57 +02:00
John Crispin
ba42c1db41 lantiq: un-macro the image building code
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-05 23:23:57 +02:00
John Crispin
f02184cbcf ubus: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-05 23:23:57 +02:00
Joseph C. Lehner
065de8bd7a ramips: fix Netgear EX2700 images
Calling `cat foo bar | dd ... conv=sync` *may* add
extraneous padding. Avoid this.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2016-06-05 23:23:57 +02:00
Joseph C. Lehner
8b0fbd8e70 ramips: rebrand Netgear EX2700 fakeroot uImage
Change image name: "OpenWrt fakeroot" -> "LEDE fakeroot"

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2016-06-05 23:23:57 +02:00
Alexey Brodkin
668dbec3f4 arc: Build uImage as well as vmlinux output files
Initially for ARC we were building vmlinux images because it
was both simpler and more convenient to debug Linux kernel
in runt-time via JTAG. Now when base system works quite nice
we may finally use U-Boot for loading the system image as
well. Still we keep building vmlinux images as some of our
boards are development boards and loading images with JTAG
could be at some points very beneficial.

Note for U-Boot header it's required to specify 2 values:
 * loading address
 * entry point (if it doesn't match loading address)

and in case of ARC entry point (EP) not only differs from
loading address but also changes from build to build due to
initramfs being placed between loading address and text section.
To accommodate that feature we have to calculate EP after
vmlinux gets built and before call to mkimage.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-05 23:23:57 +02:00
John Crispin
9363259abe procd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-05 23:23:57 +02:00
Alexander Couzens
1616bb2a7d lantiq/image: move tplink specific image into own file
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-05 23:23:57 +02:00
Alexander Couzens
aa930ba3dd lantiq: unmacro tp-link boards
even it's a little bit verbose, unmacrod board descriptions are much
easier to read and to understand.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-05 23:23:57 +02:00
Ash Benz
35c0328119 kernel/mtd: Add support for Macronix mx25u25635f, used in Archer C2600 v1.1
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-06-05 23:23:57 +02:00
Ted Hess
d0c6458339 ixp4xx: Drop linux 4.1 support
Signed-off-by: Ted Hess <thess@kitschensync.net>
2016-06-05 14:16:08 -04:00
Ted Hess
2ce19c0c1f ixp4xx: Add support for 4.4 kernel, refresh patches
Signed-off-by: Ted Hess <thess@kitschensync.net>
2016-06-05 14:07:46 -04:00
Álvaro Fernández Rojas
a0ea3eab63 brcm63xx: fix typo image/Makefile
This typo was introduced in c6990347

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-05 15:42:27 +02:00
Daniel Golle
3ec4803932 mac80211: respect user-set regulatory domain by default
It turns out most device vendors don't set the correct country code
in their devices' on-flash-EEPROM sections as they apparently rather
provide a complete per-target-market firmware with patched drivers
instead of just setting the country code.
This results in the driver to incorrectly assume the value stored in
the on-flash-EERPOM (usually US or China) being the regulatory domain
inside which the device is being used.
To work around this issue, OpenWrt introduced the ATH_USER_REGD config
variable to decide during build whether or not to allow the user to
override the regulatory domain setting. This option, however, is not
enabled by default and thus ends up being disabled for snapshots builds
and released binaries.
As we know for a long time that most devices got borked regulatory
domain values set in their EEPROMs we should allow our users to respect
their local law (instead of just assume US or China laws).
Note that also the current default has great potential of users not
ever setting their regulatory domain and thus using inapproriate and
potentially illegal frequencies and/or tx-power settings

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-05 13:37:55 +02:00
Ben Greear
56b377304e ath10k: support CT firmware choices.
This allows one to select CT firmware for ath10k
if one prefers to try this firmware instead of stock
ath10k firmware.

The 10.1 (988X) firmware can actually be installed beside the
default firmware, but it will not be used as long as the firmware-5.bin
file exists.  Users could rename the files and reboot to use different
images.

The 99X0 (wave-2) firmware  uses the same firmware-5.bin name as default
firmware, so it cannot be installed at the same time as default firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-06-05 12:48:02 +02:00
Graham Fairweather
532c3f3218 brcm63xx: add initial support for Netgear EVG2000
This patch adds support for the Netgear EVG2000 VoIP Gateway to the
bcm63xx targets.

This device was not sold to the general public, but rather is/was
provided by telcos to customers in Sweden, Australia, Singapore and
other parts of asia.

Known issues:
 - Unable to detect 53115 switch. This appear to be a problem with
probing for the PHY using MDIO and results in error 5. Doesn't seem to
be a problem with the configuration, and could use someone with
experience to have a look at it.
 - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver
fails to load the firmware for the 4322, so 802.11n is not supported.

More info on the device and the research can be found at:
https://wiki.openwrt.org/toh/netgear/evg2000
https://wikidevi.com/wiki/Netgear_EVG2000
https://github.com/Xotic750/mirror-lede/tree/evg2000
https://forum.openwrt.org/viewtopic.php?id=63950

Signed-off-by: Graham Fairweather <xotic750@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:45:08 +02:00
Álvaro Fernández Rojas
a529b41cff brcm63xx: set DSL-274XB-F1 ath9k LED as active high
D-Link DSL-274XB rev F1 has an active high ath9k LED.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:40:51 +02:00
Álvaro Fernández Rojas
85a0a908e3 brcm63xx: set HG556a A/B ath9k LED as active high
Huawei HG556a has an active high ath9k LED.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:36:23 +02:00
Álvaro Fernández Rojas
7807c7e867 brcm63xx: add support for inverting ath9k LED polarity
Some devices with ath9k WiFi require changing the default active low
polarity to high in order to correctly operate the WiFi status LEDs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:35:46 +02:00
Álvaro Fernández Rojas
ec95509af4 brcm63xx: remove obsolote preinit scripts and fix preinit iface script
These scripts were causing ip issues in the latest version of LEDE:
https://gist.github.com/Noltari/6d20d8bcbe236caf516c0a73f5477d00

Fixes preinit iface script by making eth0 the default ifname and only changing
it to eth1 for the devices that specifically need it.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:30:06 +02:00
Álvaro Fernández Rojas
c69903473b brcm63xx: move profiles definitions to image/Makefile
This switches brcm63xx to the new profile definition system in image/Makefile

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:27:48 +02:00
Álvaro Fernández Rojas
2dc7f99662 brcm63xx: refresh kernel patches and config
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:25:18 +02:00
Álvaro Fernández Rojas
fd7786159d brcm63xx: drop linux 4.1 support
Switch to linux 4.4 now that it has been enough tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:25:11 +02:00
Álvaro Fernández Rojas
23273044a8 brcm63xx: switch to linux 4.4
Boot tested on AR-5381u, AR-5387un and WAP-5813n

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 16:25:04 +02:00
Álvaro Fernández Rojas
29b412b8c5 ramips: add kmod-pwm-mediatek for mt7628/mt7688
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 13:24:25 +02:00
Álvaro Fernández Rojas
604b92dbd0 ramips: fix the number of uarts for each SoC
- Use default number of uarts (2) for rt288x/rt305x/rt3883/mt7620.
- Allow up to 3 uarts on MT7621 and MT7628.
- Remove unneeded SERIAL_8250_RT288X for MT7628.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 12:20:33 +02:00
Álvaro Fernández Rojas
243e79e10c ramips: fix Mi Wi-Fi Nano Wireless LED pinmux
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-03 12:19:57 +02:00
Alexander Couzens
297142464a kernel/spi: add kernel package for spi-omap-24xx
spi-omap-24xx can be found in TI based SoC like the beaglebone black

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Alexander Couzens
49cf356710 kernel: add random-omap rng for omap
Kernel module for the OMAP Random Number Generator
found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx
multimedia processors.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Alexander Couzens
9efbf58360 omap: switch to 4.4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Alexander Couzens
21208f5d43 linux/generic: add missing config symbols
unset following config symbols
- INPUT_PALMAS_PWRBUTTON
- INPUT_TPS65218_PWRBUTTON
- INPUT_TWL4030_PWRBUTTON
- INPUT_TWL4030_VIBRA
- INPUT_TWL6040_VIBRA
- KEYBOARD_TWL4030
- TWL4030_MADC

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Alexander Couzens
51f05b2d1a omap: take over maintainership
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Álvaro Fernández Rojas
a105eac4dd kernel: update kernel 4.4 to version 4.4.12
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-02 15:34:34 +02:00
Álvaro Fernández Rojas
794383b801 brcm63xx: fix F@ST2704V2 image generation
This device needs the firmware padded to 4MB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-01 21:47:42 +02:00
Alexander Couzens
9128ed33b5
add usb gadget ehci debug driver
This gadget driver allow to debug other devices via EHCI Debug Port
capability.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:56:52 +02:00
Alexander Couzens
2e980479c1 IB/SDK/toolchain: use lower cases filenames
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:54:36 +02:00
Alexander Couzens
4a7c653400 IB/SDK/toolchain: use VERSION_DIST_SANITIZED instead of VERSION_DIST
VERSION_DIST can contains spaces which produces problems when used as file name

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:54:36 +02:00
Alexander Couzens
a7d13178f4 include: move VERSION_DIST_SANITIZED to version.mk
Also move sanitize function to version.mk
Prepare use of VERSION_DIST_SANITIZED by IB/SDK/toolchain

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:54:36 +02:00
Alexander Couzens
38d845b405 include: rename DIST_SANITIZED to VERSION_DIST_SANITZED
All version variables contain VERSION prefix.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:54:36 +02:00
Alexander Couzens
2a9f03adea ar71xx/image/edimax shorten the revision to 13 character
edimax fails if the revision is longer than 13 characters.
Also change the name from OpenWrt to LEDE

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:54:36 +02:00
Álvaro Fernández Rojas
65ae9db41a brcm2708: fix build error introduced in 2b4e5d47
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-01 17:11:04 +02:00
Jo-Philipp Wich
83390271f9 jsonfilter: fix printing 64bit values
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-01 16:54:04 +02:00
Dirk Neukirchen
872075c761 elfutils: remove unrecognized config option
fixes:
configure: WARNING: unrecognized options: --disable-werror

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-01 15:18:42 +02:00
Dirk Neukirchen
75dc12dac1 libpcap: remove unrecognized configure options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-01 15:18:42 +02:00