KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19718 commits 3 branches 0 tags 154 MiB
Commit graph

7734 commits

Author SHA1 Message Date
Jo-Philipp Wich
2fc3fe1d09 Make the grub timeout configurable on x86 targets 
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 29786
 2012-01-19 01:14:45 +00:00
Jo-Philipp Wich
095f7f2da3 x86/config-3.2: add linux-3.2 symbols for x86 
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 29783
 2012-01-19 00:31:39 +00:00
Florian Fainelli
dbfeb5d158 fix thinko in 102-ehci_hcd_ignore_oc patch 
SVN-Revision: 29773
 2012-01-18 07:56:02 +00:00
John Crispin
49eb3fd845 gigaset 76x 
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
 2012-01-17 12:10:35 +00:00
John Crispin
a2708d11e8 ramips: Rework ramips_eth to not require irqsave locking anymore 
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 29762
 2012-01-17 11:23:11 +00:00
Hauke Mehrtens
034cf5643f brcm47xx: add support for kernel 3.2 
SVN-Revision: 29756
 2012-01-15 21:18:34 +00:00
Hauke Mehrtens
c3d134af12 brcm47xx: run kernel_oldconfig 
SVN-Revision: 29755
 2012-01-15 14:53:32 +00:00
Imre Kaloz
f9e41adc80 add support for OMAP4 based boards, starting with the PandaBoard 
SVN-Revision: 29753
 2012-01-14 23:02:56 +00:00
Imre Kaloz
6274648199 fixup arm xz support with recent changes 
SVN-Revision: 29750
 2012-01-14 22:55:04 +00:00
Imre Kaloz
e65195c246 add missing symbols 
SVN-Revision: 29749
 2012-01-14 22:53:28 +00:00
Felix Fietkau
b0479e2ca2 kernel: disable bridge igmp snooping in 3.2 as well 
SVN-Revision: 29747
 2012-01-14 14:57:03 +00:00
Felix Fietkau
66895b7115 kernel: disable bridge igmp snooping by default to avoid multicast issues 
SVN-Revision: 29744
 2012-01-14 13:50:25 +00:00
Jonas Gorski
9eb73ee6b7 kernel: ppc40x: ppc44x: add missing kernel config symbol 
SVN-Revision: 29742
 2012-01-14 12:04:17 +00:00
Hauke Mehrtens
d5bc3a994b brcm47xx: update usb driver 
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.

SVN-Revision: 29734
 2012-01-13 20:11:23 +00:00
Jo-Philipp Wich
9d497cb132 rtl8366: fix rtl8366_smi_detect() after r29677 
SVN-Revision: 29732
 2012-01-13 19:17:58 +00:00
Jonas Gorski
3883e71097 brcm63xx: add support for linux 3.2 
SVN-Revision: 29731
 2012-01-13 14:59:50 +00:00
Jonas Gorski
1bc0abb058 kernel: add support for linux 3.2.1 
SVN-Revision: 29730
 2012-01-13 14:55:07 +00:00
Jonas Gorski
f3f1075655 kernel: backport overlayfs v11 to 3.0 and 2.6.39 
Should fix whiteout issues and missing files when using extroot.

SVN-Revision: 29727
 2012-01-13 14:42:53 +00:00
Jonas Gorski
c560444a58 kernel: update linux 3.1 to 3.1.9 
SVN-Revision: 29726
 2012-01-13 14:38:28 +00:00
Jonas Gorski
e49d3e1d5b kernel: update linux 3.0 to 3.0.17 
SVN-Revision: 29725
 2012-01-13 14:10:44 +00:00
Felix Fietkau
e87bb77966 ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough 
SVN-Revision: 29719
 2012-01-12 10:15:11 +00:00
Felix Fietkau
c33e016fa5 ar8216: do not strip vlan tags when running with vlan_enable=0 
SVN-Revision: 29718
 2012-01-12 10:15:08 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
SVN-Revision: 29713
 2012-01-11 18:00:50 +00:00
Daniel Dickinson
034b7f0ef5 Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. 
SVN-Revision: 29712
 2012-01-11 13:47:48 +00:00
Gabor Juhos
67f62cf5cf ar71xx: disable ath79 in order to get rid of Kconfig warnings 
SVN-Revision: 29711
 2012-01-11 09:14:19 +00:00
Gabor Juhos
88d8cdd503 ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29710
 2012-01-11 09:14:18 +00:00
Gabor Juhos
e1b7995aef ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
SVN-Revision: 29709
 2012-01-11 09:14:17 +00:00
Gabor Juhos
67444c7795 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
SVN-Revision: 29708
 2012-01-11 09:14:15 +00:00
Gabor Juhos
0f566a376c ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29707
 2012-01-11 09:14:14 +00:00
Gabor Juhos
09a6e3f662 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
SVN-Revision: 29706
 2012-01-11 09:14:13 +00:00
Gabor Juhos
714a9bd641 ar71xx: ar71xx_wdt: add shutdown handler 
SVN-Revision: 29705
 2012-01-11 09:14:11 +00:00
Gabor Juhos
9727256330 ar71xx: refresh patches 
SVN-Revision: 29683
 2012-01-07 19:36:43 +00:00
Gabor Juhos
4edff7d3ef ar71xx: add a profile and build images for the TL-WR2543N/ND 
SVN-Revision: 29682
 2012-01-07 19:36:42 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

SVN-Revision: 29680
 2012-01-07 19:36:35 +00:00
Gabor Juhos
a56bdeff9d ar71xx: allow to specify max read size for m25p80 
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

SVN-Revision: 29679
 2012-01-07 19:36:33 +00:00
Gabor Juhos
8b567fb508 generic: add driver for the RTL8367R/M switches 
SVN-Revision: 29678
 2012-01-07 19:36:31 +00:00
Gabor Juhos
87fb92ee03 generic: rtl8366: preparing for RTL8367 support 
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

SVN-Revision: 29677
 2012-01-07 19:36:30 +00:00
Gabor Juhos
43196813d7 generic: rtl8366_smi: add timeout message 
SVN-Revision: 29676
 2012-01-07 19:36:25 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
 2012-01-07 17:24:44 +00:00
Gabor Juhos
6c74274c8d generic: improve MIPS kexec support 
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

SVN-Revision: 29674
 2012-01-07 16:29:16 +00:00
Gabor Juhos
f638c6207b ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
SVN-Revision: 29672
 2012-01-06 15:54:59 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos
84cd8a5ee0 ar71xx: fix RB-750 network configuration 
SVN-Revision: 29668
 2012-01-06 07:20:54 +00:00
Gabor Juhos
8eb0b7ab3d ar71xx: fix sections mismatch warnings in the nand drivers 
SVN-Revision: 29667
 2012-01-05 18:08:33 +00:00
Gabor Juhos
232eb83f74 ar71xx: fix LED configuration on the RB-750 
SVN-Revision: 29666
 2012-01-05 18:08:28 +00:00
Gabor Juhos
d65c6fe720 ar71xx: create profile and build image for the ALFA AP96 board 
SVN-Revision: 29663
 2012-01-04 21:13:57 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos
807e046193 ar71xx: specify console kernel parameter for the Compex boards 
SVN-Revision: 29660
 2012-01-04 17:30:59 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices 
SVN-Revision: 29659
 2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos
301b1b4f92 ar71xx: show correct model name on TL-WA701N/ND boards 
SVN-Revision: 29657
 2012-01-04 17:30:55 +00:00
Gabor Juhos
ac68f0d8fa ar71xx: add profile and build image for the TL-WA701N/ND boards 
SVN-Revision: 29656
 2012-01-04 17:30:54 +00:00
Gabor Juhos
72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
SVN-Revision: 29654
 2012-01-04 17:30:52 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

SVN-Revision: 29652
 2012-01-04 17:30:49 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
88223f87d1 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29648
 2012-01-04 17:30:41 +00:00
Jo-Philipp Wich
a788f199c9 remove current RTSP support 
SVN-Revision: 29643
 2012-01-04 00:29:29 +00:00
Jo-Philipp Wich
237282ae8c backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. 
SVN-Revision: 29642
 2012-01-03 23:08:15 +00:00
Gabor Juhos
8854c90119 ar71xx: add profile and build factory image for the Hornet-UB board 
SVN-Revision: 29637
 2012-01-01 19:30:29 +00:00
Gabor Juhos
1d3de89f3c ar71xx: build images for the ALFA Network N2/N5 boards 
SVN-Revision: 29636
 2012-01-01 19:30:28 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
fff02e6ea8 ar71xx: enable SWCONFIG_LEDS 
SVN-Revision: 29630
 2011-12-31 15:02:40 +00:00
Gabor Juhos
5fa65cba6e kernel: swconfig: introduce a generic switch LED trigger 
SVN-Revision: 29627
 2011-12-31 15:02:30 +00:00
Gabor Juhos
8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Gabor Juhos
975355a2b1 kernel: swconfig: add get_port_{link,stats} callbacks 
SVN-Revision: 29625
 2011-12-31 15:02:24 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
 2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0 
SVN-Revision: 29616
 2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
SVN-Revision: 29615
 2011-12-28 08:43:32 +00:00
Gabor Juhos
76dacee995 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 29614
 2011-12-27 16:59:43 +00:00
Gabor Juhos
c6ee919b2a ar71xx: fix sysupgrade on PB42/PB44 boards 
SVN-Revision: 29613
 2011-12-27 16:57:01 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
SVN-Revision: 29612
 2011-12-27 16:56:30 +00:00
Jo-Philipp Wich
9fa33ceee2 add missing config symbol 
SVN-Revision: 29610
 2011-12-25 13:33:18 +00:00
Hauke Mehrtens
11125d68ed brcm47xx: fix usb on more recent bcma based devices. 
SVN-Revision: 29605
 2011-12-23 17:21:52 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
 2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
 2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
 2011-12-23 14:27:05 +00:00
Felix Fietkau
db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Jonas Gorski
8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

SVN-Revision: 29595
 2011-12-21 19:32:40 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Hauke Mehrtens
0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
 2011-12-19 23:55:20 +00:00
Hauke Mehrtens
5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
 2011-12-19 23:39:13 +00:00
Hauke Mehrtens
1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
SVN-Revision: 29574
 2011-12-19 23:33:03 +00:00
Hauke Mehrtens
91d0ef6f19 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
 2011-12-19 23:26:15 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
5a0a2b2f1b ar71xx: use 64kraw template on more TP-Link boards 
SVN-Revision: 29561
 2011-12-17 18:49:55 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos
36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos
0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos
44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos
bfe747b7d9 ar71xx: build images for TL-WR741N/ND v2 
SVN-Revision: 29548
 2011-12-15 22:03:48 +00:00
Gabor Juhos
aefff26624 ar71x: use raw squashfs images for TP-Link boards 
SVN-Revision: 29547
 2011-12-15 22:03:46 +00:00
Gabor Juhos
d5bd28ffae ar71xx: create a template for using unpadded squashfs images 
SVN-Revision: 29546
 2011-12-15 22:03:45 +00:00
Gabor Juhos
dbc4fa4b5b ar71xx: put squash image right after the kernel on TP-Link boards 
SVN-Revision: 29545
 2011-12-15 22:03:44 +00:00
Gabor Juhos
850be54b72 ar71xx: tplinkpart: allow to detect JFFS2 as well 
SVN-Revision: 29543
 2011-12-15 22:03:40 +00:00
Gabor Juhos
b7d7481b07 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
SVN-Revision: 29541
 2011-12-15 13:25:23 +00:00
Gabor Juhos
0655552860 ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x 
SVN-Revision: 29540
 2011-12-15 13:25:21 +00:00
Gabor Juhos
204fc6bed5 ar71xx: ag71xx: nuke ar7240sw_init 
SVN-Revision: 29539
 2011-12-15 13:25:20 +00:00
Gabor Juhos
d1f7783612 ar71xx: fix mac addresses on jjPlus devices 
SVN-Revision: 29538
 2011-12-15 13:25:18 +00:00
Gabor Juhos
d3058b8f8c ar71xx: build image for the Hornet-UB board 
SVN-Revision: 29536
 2011-12-14 20:54:11 +00:00
Gabor Juhos
b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board 
SVN-Revision: 29535
 2011-12-14 20:54:10 +00:00
Gabor Juhos
66c8cc0f6d ar71xx: add GPIO function bit defines for AR933X 
SVN-Revision: 29534
 2011-12-14 20:54:07 +00:00
Gabor Juhos
0c38d36488 ramips: add support for Omnima MiniEMBWiFi board 
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
 2011-12-14 20:51:26 +00:00
Felix Fietkau
7076d74b21 ar71xx: fix gpio count for ar7241/ar7242 
SVN-Revision: 29532
 2011-12-14 20:47:24 +00:00
Felix Fietkau
b878f4a927 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h 
SVN-Revision: 29531
 2011-12-14 20:21:42 +00:00
Felix Fietkau
e3017bc05e ath9k: add support for registering extra leds connected to the wmac gpio lines 
SVN-Revision: 29530
 2011-12-14 20:21:36 +00:00
Gabor Juhos
d2717d3d47 ar71xx: get rid of squashfs-4k images 
SVN-Revision: 29522
 2011-12-13 20:41:24 +00:00
Gabor Juhos
5afedc67e2 generic: disable 'small sector' erase in m25p80 driver 
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html

SVN-Revision: 29521
 2011-12-13 20:41:22 +00:00
Felix Fietkau
4a441570ca kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets 
SVN-Revision: 29516
 2011-12-13 15:14:59 +00:00
Felix Fietkau
3806671fe5 ar71xx: fix wireless led on wzr-hp-g450h 
SVN-Revision: 29515
 2011-12-13 15:00:43 +00:00
Gabor Juhos
2dd7dfb1c9 ar71xx: enable AR9341 support at setup.c 
Patch-by: dyq <729650915@qq.com>

SVN-Revision: 29514
 2011-12-13 14:59:43 +00:00
Gabor Juhos
058998acdb ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29513
 2011-12-13 14:59:40 +00:00
Felix Fietkau
48f9717371 ar71xx: add gpios and usb for wzr-hp-g450h 
SVN-Revision: 29509
 2011-12-13 13:33:44 +00:00
Gabor Juhos
4ca2d86493 ar71xx: use RedBoot parser on PB44 
SVN-Revision: 29501
 2011-12-11 15:52:47 +00:00
John Crispin
934eef78ca convert to gpiolib 
Signed-off-by:	karlp@tweak.net.au

SVN-Revision: 29486
 2011-12-09 07:52:10 +00:00
Gabor Juhos
6e69765559 ar71xx: fix WNDR3x00 factory image generation 
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29473
 2011-12-07 06:55:50 +00:00
Gabor Juhos
8eb8a6e1e7 ar71xx: fix WNDR3x00 model detection 
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.

r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.

I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29472
 2011-12-07 06:55:39 +00:00
Gabor Juhos
43bd4c6ad1 ramips: fix mac addresses on the DIR-300/600 boards 
SVN-Revision: 29471
 2011-12-06 20:06:08 +00:00
Jonas Gorski
e33bb9ec66 linux: update 3.1 to 3.1.4 
SVN-Revision: 29470
 2011-12-06 19:50:30 +00:00
Jonas Gorski
6e2ae90f4a linux: update 3.0 to 3.0.12 
SVN-Revision: 29469
 2011-12-06 19:50:25 +00:00
Gabor Juhos
c6b2b98812 ar71xx: create firmware image for the TL-WR740N/ND v4 boards 
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

SVN-Revision: 29468
 2011-12-06 16:26:44 +00:00
Gabor Juhos
fbfad4e9b4 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw 
SVN-Revision: 29467
 2011-12-06 16:26:43 +00:00
Gabor Juhos
d753e08c79 ar71xx: fix TL-MR3x20 profile names in image/Makefile 
SVN-Revision: 29463
 2011-12-06 13:53:21 +00:00
Gabor Juhos
62d8009cdd ar71xx: cleanup TP-Link profiles 
SVN-Revision: 29461
 2011-12-06 10:29:25 +00:00
Gabor Juhos
f7a482d382 ar71xx: add TP-Link board detection 
SVN-Revision: 29459
 2011-12-05 21:11:01 +00:00
Gabor Juhos
bdc2eca7de ar71xx: use correct mac on the lan interface on several TP-LINK devices 
SVN-Revision: 29458
 2011-12-05 21:10:58 +00:00
Gabor Juhos
0103069372 ar71xx: allow to pass negative offset values for ar71xx_init_mac 
SVN-Revision: 29457
 2011-12-05 21:10:55 +00:00
Gabor Juhos
ada92aee62 ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set 
SVN-Revision: 29456
 2011-12-05 18:21:15 +00:00
Gabor Juhos
c6bcf8d1d8 ar71xx: verify hardware id of firmware images on TP-Link boards 
SVN-Revision: 29455
 2011-12-05 18:11:51 +00:00
Gabor Juhos
5ef6ec4a31 ramips: set mac addresses for the NBG-419N 
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>

SVN-Revision: 29454
 2011-12-05 17:27:07 +00:00
Gabor Juhos
750d560767 ramips: set preinit interface mac on the hw550-3g board 
Based on a patch by Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29453
 2011-12-05 17:27:06 +00:00
Gabor Juhos
b5d7b359b2 ramips: use ramips_get_mac_* functions in the preinit script 
SVN-Revision: 29452
 2011-12-05 17:27:04 +00:00
Gabor Juhos
4d5b940e66 ramips: move ramips_get_mac_* functions to lib/ramips.sh 
SVN-Revision: 29451
 2011-12-05 17:27:03 +00:00
Gabor Juhos
cc853acb3a ramips: add ramips_ prefix to get_mac_{binary,nvram} functions 
SVN-Revision: 29450
 2011-12-05 17:27:02 +00:00
Gabor Juhos
b1137d48a4 ramips: fix network configuration setup 
SVN-Revision: 29448
 2011-12-05 16:54:48 +00:00
Gabor Juhos
4dc9092f4b ar71xx: reclaim some unused space on TP-Link boards 
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

SVN-Revision: 29447
 2011-12-05 14:52:36 +00:00
Gabor Juhos
3e7a6d182a ar71xx: check squashfs signature in TP-Link mtd parser 
SVN-Revision: 29446
 2011-12-05 14:52:33 +00:00
Gabor Juhos
feebf484ba ar71xx: use the lzma-loader on TP-Link boards w/o lzma support 
SVN-Revision: 29444
 2011-12-05 14:52:28 +00:00
Gabor Juhos
d42968351f ar71xx: add lzma loader 
SVN-Revision: 29443
 2011-12-05 14:52:25 +00:00
Felix Fietkau
1f809532de ar71xx: add preliminary support for wzr-hp-g450h 
SVN-Revision: 29441
 2011-12-05 14:20:51 +00:00
Felix Fietkau
d1f63f8538 ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well 
SVN-Revision: 29440
 2011-12-05 14:20:44 +00:00
Gabor Juhos
4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling 
SVN-Revision: 29434
 2011-12-05 13:03:54 +00:00
Jo-Philipp Wich
78699c2e51 add some missing wndr3800 base-files definitions 
SVN-Revision: 29433
 2011-12-05 12:56:21 +00:00
Gabor Juhos
5177814ade ar71xx: change user-space board detection 
SVN-Revision: 29432
 2011-12-05 12:56:20 +00:00
Gabor Juhos
8a3a60fc64 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big 
SVN-Revision: 29431
 2011-12-05 12:47:53 +00:00
Gabor Juhos
56c9b50006 ramips: fix argus board rootfs size 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29422
 2011-12-04 15:24:57 +00:00
Gabor Juhos
7cfa39f032 ar71xx: use the tp-link parser on the tp-link boards 
Also remove static partition maps.

SVN-Revision: 29416
 2011-12-03 18:13:31 +00:00
Gabor Juhos
514b1167c9 ar71xx: add mtd partition parser for the TP-Link boards 
SVN-Revision: 29415
 2011-12-03 18:13:27 +00:00
Gabor Juhos
fc7fb29bae ar71xx: run the RedBoot parser only on the RedBoot based boards 
SVN-Revision: 29414
 2011-12-03 18:13:25 +00:00
Gabor Juhos
9cc28d5aa0 ar71xx: run the MyLoader parser only on the WP543 board 
SVN-Revision: 29413
 2011-12-03 18:13:23 +00:00
Gabor Juhos
67a0b9aada ar71xx: run the wrt160nl parser only on the WRT160NL board 
Also remove static mtd partition definitions.

SVN-Revision: 29412
 2011-12-03 18:13:20 +00:00
Gabor Juhos
c8acd6e013 ar71xx: allow to pass part_probe types to the m25p80 driver 
SVN-Revision: 29411
 2011-12-03 18:13:18 +00:00
Gabor Juhos
20483faed0 ar71xx: create initramfs images for the newer TP-Link boards 
SVN-Revision: 29410
 2011-12-03 16:57:23 +00:00
Gabor Juhos
9a2005e5e6 ar71xx: remove swconfig and wpad-mini from custom profiles 
SVN-Revision: 29408
 2011-12-03 16:33:41 +00:00
Gabor Juhos
bc1d818610 ar71xx: add uboot-envtools to the default package list 
SVN-Revision: 29407
 2011-12-03 16:33:40 +00:00
Gabor Juhos
a02a9c3f8b ar71xx: reclaim unused space in WNDR3700/3800 images 
Patch by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 29406
 2011-12-03 16:33:38 +00:00
Gabor Juhos
ac82296c53 ar71xx: add a profile and build image for the OM2P board 
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29397
 2011-12-01 22:49:05 +00:00
Gabor Juhos
f188f1bad5 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
 2011-12-01 22:49:02 +00:00
Gabor Juhos
0612667c34 ar71xx: configure default led behavior for the OM2P 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29394
 2011-12-01 22:48:59 +00:00
Gabor Juhos
3fccc3b376 ramips: enable sysupgrade on the RT-N15 board 
SVN-Revision: 29393
 2011-12-01 22:48:58 +00:00
Gabor Juhos
4b2d1c3ad3 ramips: wrap long line in platform upgrade script 
SVN-Revision: 29392
 2011-12-01 22:48:57 +00:00
Gabor Juhos
d622263588 ramips: add profile for the Asus RT-N15 
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29391
 2011-12-01 22:48:55 +00:00
Gabor Juhos
3a9e02fa41 ramips: setup default network configuration for RT-N15 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29390
 2011-12-01 22:48:54 +00:00
Gabor Juhos
fc61c107f0 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile 
It is needed by the RT-N15 board.

SVN-Revision: 29389
 2011-12-01 22:48:53 +00:00
Gabor Juhos
80221fcd2a ramips: remove default network configuration, and generate that from uci-defaults 
SVN-Revision: 29387
 2011-12-01 22:48:51 +00:00
Gabor Juhos
4f6c58adac ramips: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29386
 2011-12-01 22:48:48 +00:00
Gabor Juhos
39348e387f ar71xx: use /lib/functions/uci-defaults.sh 
SVN-Revision: 29385
 2011-12-01 22:48:47 +00:00
Gabor Juhos
569d8de6d6 ramips: simplify uci-defaults/network script 
SVN-Revision: 29383
 2011-12-01 22:48:45 +00:00
Gabor Juhos
66c9a351dd ramips: setup mac and network interfaces from separate functions 
SVN-Revision: 29382
 2011-12-01 22:48:43 +00:00
Gabor Juhos
62d18e9f9a ramips: fix Asus RT-N15 board support 
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29381
 2011-12-01 22:48:42 +00:00
Gabor Juhos
2dd79d55c7 ramips: Sparklan wcr-150gn board fixes 
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29380
 2011-12-01 22:48:41 +00:00
Gabor Juhos
7c678e7511 ramips: fix package name of kmod-input-gpio-buttons 
Based on a patch from Omnima Limited.

SVN-Revision: 29379
 2011-12-01 22:48:39 +00:00
Gabor Juhos
2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
 2011-12-01 22:48:38 +00:00
Gabor Juhos
295e04084c ramips: setup bc2 mac addresses from the generic network script 
SVN-Revision: 29377
 2011-12-01 22:48:37 +00:00
Gabor Juhos
02f95d4fb3 ramips: combine network setup for all boards in one file 
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 29376
 2011-12-01 22:48:35 +00:00
John Crispin
88cb7ae104 omap24xx: bump to 3.1.3 
SVN-Revision: 29349
 2011-11-28 12:46:18 +00:00
John Crispin
bf7316424c lantiq: bump to 3.1.3 
SVN-Revision: 29348
 2011-11-28 10:22:58 +00:00
Nicolas Thill
5e83009a52 targets: fix CONFIG_USB_STORAGE_* inconsistency 
* all options were switched from bool to tristate in 2.6.30
 * add/change/move them to generic, disabled by default
 * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
 * cleanup ordering

SVN-Revision: 29337
 2011-11-25 20:47:44 +00:00
Gabor Juhos
f20797306a ar71xx: modify phy mask of the WP543 board 
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
 2011-11-24 20:09:43 +00:00
Gabor Juhos
c20d7378e5 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
 2011-11-24 20:09:38 +00:00
Gabor Juhos
600b6efc41 ar71xx: copy atheros initramfs images to the image directory 
SVN-Revision: 29325
 2011-11-24 20:09:35 +00:00
Gabor Juhos
d97cf76790 ar71xx: specify mtd layout in command line for the DB120 board 
SVN-Revision: 29324
 2011-11-24 20:09:32 +00:00
John Crispin
9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch 
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
 2011-11-23 12:22:15 +00:00
John Crispin
4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups 
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
 2011-11-22 18:50:51 +00:00
Florian Fainelli
718907b661 don't package gpioctl by default 
SVN-Revision: 29288
 2011-11-21 16:36:39 +00:00
Nicolas Thill
c33f21ae95 target/uml: export atomic64_* functions on 32-bit x86 
SVN-Revision: 29287
 2011-11-21 14:28:33 +00:00
Gabor Juhos
9990523a0f ar71xx: set GE0 phy_mask for AR933x 
SVN-Revision: 29274
 2011-11-20 11:30:10 +00:00
Jo-Philipp Wich
b5739aabd9 fix D-Link DSL-2650U image generation 
SVN-Revision: 29266
 2011-11-19 21:34:51 +00:00
Jonas Gorski
8bac0df4ae linux: update 3.0 to 3.0.9 
SVN-Revision: 29264
 2011-11-19 18:39:12 +00:00
Florian Fainelli
ae90aa4efd build images for D-Link DSL-2650U (#9003) 
SVN-Revision: 29238
 2011-11-18 10:37:03 +00:00
Michael Büsch
0b86c2648a omap24xx: Fix cbus nested IRQ acking 
SVN-Revision: 29237
 2011-11-17 22:31:27 +00:00
Michael Büsch
df2810831c omap24xx: Fix initialization of software IRQ mask 
SVN-Revision: 29236
 2011-11-17 21:02:00 +00:00
Michael Büsch
3f92f7dd90 omap24xx: Update 3.1 config 
SVN-Revision: 29234
 2011-11-17 19:35:57 +00:00
Michael Büsch
4793be2df9 omap24xx: Some retu/tahvo IRQ fixes 
SVN-Revision: 29233
 2011-11-17 18:06:19 +00:00
Michael Büsch
630bafc5dd omap24xx: Add basic kexec fixes. 
SVN-Revision: 29232
 2011-11-17 14:57:34 +00:00
Michael Büsch
06c986984e omap24xx: Add workaround for omapfb locking bug. 
SVN-Revision: 29201
 2011-11-16 22:34:38 +00:00
Michael Büsch
0f03e17bd0 Revert r29193 
SVN-Revision: 29195
 2011-11-16 19:03:23 +00:00
Michael Büsch
93f02b1ba0 omap24xx: Set platform specific optimization flags 
SVN-Revision: 29194
 2011-11-16 19:02:12 +00:00
Michael Büsch
b058e97af4 n810: Add xmodmap to profile 
SVN-Revision: 29193
 2011-11-16 19:01:19 +00:00
Florian Fainelli
8d66465b08 include bridge and 8021q modules by default 
SVN-Revision: 29164
 2011-11-15 22:24:22 +00:00
John Crispin
bbe96f13a6 lantiq: add runtime generation of /etc/config/network 
SVN-Revision: 29161
 2011-11-15 18:21:00 +00:00
John Crispin
79a4642b40 lantiq: fix falcon build breakage 
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
 2011-11-14 18:55:58 +00:00
Gabor Juhos
f27548448b ar71xx: fix USB LED on the DB120 board 
SVN-Revision: 29126
 2011-11-14 17:43:15 +00:00
Gabor Juhos
6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin 
SVN-Revision: 29125
 2011-11-14 17:43:14 +00:00
Gabor Juhos
0c1d3617d7 ar71xx: fix GPIO function handling on AR934x 
SVN-Revision: 29124
 2011-11-14 17:43:13 +00:00
Gabor Juhos
aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines 
SVN-Revision: 29123
 2011-11-14 17:43:11 +00:00
Gabor Juhos
62a7795afd ar71xx: merge nand scan patch 
SVN-Revision: 29122
 2011-11-14 17:43:10 +00:00
Gabor Juhos
12dae96097 ar71xx: fix a compiler warning 
SVN-Revision: 29110
 2011-11-14 13:07:47 +00:00
Gabor Juhos
5ae0fd802c ar71xx: fix GPIO count for AR934x 
SVN-Revision: 29109
 2011-11-14 13:07:45 +00:00
Gabor Juhos
e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X 
SVN-Revision: 29108
 2011-11-14 11:49:53 +00:00
Gabor Juhos
3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling 
SVN-Revision: 29107
 2011-11-14 11:49:51 +00:00
Gabor Juhos
42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines 
SVN-Revision: 29106
 2011-11-14 11:49:49 +00:00
Gabor Juhos
c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init 
SVN-Revision: 29105
 2011-11-14 11:49:47 +00:00
Gabor Juhos
cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files 
SVN-Revision: 29103
 2011-11-14 07:38:09 +00:00
Gabor Juhos
defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth 
SVN-Revision: 29102
 2011-11-14 07:38:07 +00:00
Gabor Juhos
6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth 
SVN-Revision: 29101
 2011-11-14 07:38:05 +00:00
Florian Fainelli
7f787707de build images for Pirelli A226M (#10409) 
SVN-Revision: 29045
 2011-11-13 19:19:22 +00:00
Florian Fainelli
5dc2098448 register uart0 on DWV-S0 boards (#10409) 
SVN-Revision: 29044
 2011-11-13 19:19:18 +00:00
Florian Fainelli
56a96ba876 refresh 3.0 patches 
SVN-Revision: 29043
 2011-11-13 19:19:14 +00:00
Florian Fainelli
54da5cf11f refresh 2.6.39 patches 
SVN-Revision: 29042
 2011-11-13 19:19:10 +00:00
Florian Fainelli
717a4391d7 rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch 
SVN-Revision: 29041
 2011-11-13 19:19:05 +00:00
Florian Fainelli
c093c9df34 fix typo, load ip17xx switch module 
SVN-Revision: 29039
 2011-11-13 18:41:26 +00:00
Gabor Juhos
368bbc510b ar71xx: enable has_gbit flag on AR724{0,1} 
SVN-Revision: 29026
 2011-11-13 17:36:36 +00:00
Gabor Juhos
15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board 
SVN-Revision: 29022
 2011-11-13 12:48:03 +00:00
Gabor Juhos
f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
SVN-Revision: 29021
 2011-11-13 12:48:01 +00:00
Gabor Juhos
d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status 
SVN-Revision: 29017
 2011-11-13 11:27:04 +00:00
Gabor Juhos
d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices 
SVN-Revision: 29016
 2011-11-13 11:27:03 +00:00
Gabor Juhos
34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
SVN-Revision: 29015
 2011-11-13 11:27:01 +00:00
Gabor Juhos
2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
SVN-Revision: 29014
 2011-11-13 11:27:00 +00:00
Gabor Juhos
538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos
93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos
da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
SVN-Revision: 29010
 2011-11-13 11:26:54 +00:00
Gabor Juhos
0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
 2011-11-13 11:26:52 +00:00
Gabor Juhos
1afc76ea13 ar71xx: refresh kernel patches 
SVN-Revision: 29008
 2011-11-13 11:26:51 +00:00
Jonas Gorski
d8acb75009 linux: update 3.1 to 3.1.1 
SVN-Revision: 29007
 2011-11-13 10:48:05 +00:00
John Crispin
a8797d0de6 lantiq: add uci-defaults code for handling leds 
SVN-Revision: 29004
 2011-11-12 23:40:21 +00:00
John Crispin
832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
SVN-Revision: 29003
 2011-11-12 23:40:16 +00:00
John Crispin
5dcbbf0160 lantiq: rename leds 
SVN-Revision: 29002
 2011-11-12 23:40:12 +00:00
John Crispin
d84b7596d9 lantiq: split compat headers out of bsp header patch 
SVN-Revision: 29001
 2011-11-12 23:40:07 +00:00
John Crispin
2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware 
SVN-Revision: 29000
 2011-11-12 23:40:01 +00:00
John Crispin
3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
SVN-Revision: 28999
 2011-11-12 23:39:56 +00:00
John Crispin
4248705108 lantiq: cleanup default package selection 
SVN-Revision: 28998
 2011-11-12 23:39:51 +00:00
John Crispin
eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
SVN-Revision: 28994
 2011-11-12 18:41:15 +00:00
Gabor Juhos
bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch 
SVN-Revision: 28993
 2011-11-12 14:09:52 +00:00
Gabor Juhos
ecb3690d0a kernel: ar8216: move port vlan setup into a separate function 
SVN-Revision: 28992
 2011-11-12 14:09:50 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos
2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos
d461fdd519 ar71xx: add diag support for the DB120 board 
SVN-Revision: 28975
 2011-11-12 10:54:10 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Gabor Juhos
8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
 2011-11-12 10:54:04 +00:00
John Crispin
fda4ee22a0 lantiq: improve falcon package selection 
SVN-Revision: 28962
 2011-11-11 21:59:11 +00:00
John Crispin
e1dc73be90 lantiq: fix breakage introduced in 3.1 bump 
SVN-Revision: 28961
 2011-11-11 21:59:01 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jonas Gorski
f53128f79b target: linux: mtd: fix MTDREFRESH to an arbitrary high number 
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

SVN-Revision: 28893
 2011-11-09 21:16:36 +00:00
Felix Fietkau
7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau
94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Felix Fietkau
b06efd636a kernel: add a top level menuconfig option for enabling lockdep 
SVN-Revision: 28848
 2011-11-08 00:32:57 +00:00
Gabor Juhos
87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults 
SVN-Revision: 28833
 2011-11-07 21:44:24 +00:00
Gabor Juhos
09fdfa444f ar71xx: create ALL0258N network config from uci-defaults 
SVN-Revision: 28832
 2011-11-07 21:44:23 +00:00
Gabor Juhos
63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
SVN-Revision: 28831
 2011-11-07 21:44:20 +00:00
Gabor Juhos
c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults 
SVN-Revision: 28830
 2011-11-07 21:44:17 +00:00
Gabor Juhos
ee1a07a11d ar71xx: create RB-493G network config from uci-defaults 
SVN-Revision: 28829
 2011-11-07 21:44:12 +00:00
Gabor Juhos
d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults 
SVN-Revision: 28828
 2011-11-07 21:44:11 +00:00
Gabor Juhos
68be590894 ar71xx: create WRT160NL network config from uci-defaults 
SVN-Revision: 28827
 2011-11-07 21:44:09 +00:00
Gabor Juhos
83901e47c9 ar71xx: create PB92 network config from uci-defaults 
SVN-Revision: 28826
 2011-11-07 21:44:08 +00:00
Gabor Juhos
22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults 
SVN-Revision: 28825
 2011-11-07 21:44:07 +00:00
Gabor Juhos
e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
SVN-Revision: 28824
 2011-11-07 21:44:03 +00:00
Gabor Juhos
9298c7afe5 ar71xx: create RB-450 network config from uci-defaults 
SVN-Revision: 28823
 2011-11-07 21:44:02 +00:00
Gabor Juhos
ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
SVN-Revision: 28822
 2011-11-07 21:44:01 +00:00
Gabor Juhos
944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults 
SVN-Revision: 28821
 2011-11-07 21:43:58 +00:00
Gabor Juhos
6e8390ae6c ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
 2011-11-07 21:43:56 +00:00
Gabor Juhos
b62560413a ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
 2011-11-07 21:43:54 +00:00
Gabor Juhos
6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
 2011-11-07 21:43:52 +00:00
Gabor Juhos
0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script 
SVN-Revision: 28817
 2011-11-07 21:43:51 +00:00
Gabor Juhos
54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config 
SVN-Revision: 28816
 2011-11-07 21:34:33 +00:00
Gabor Juhos
5b6cc3eb9f ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

SVN-Revision: 28815
 2011-11-07 21:34:32 +00:00
Imre Kaloz
cc2cf8f3d5 update 3.1 patches 
SVN-Revision: 28814
 2011-11-07 21:13:13 +00:00