Commit graph

627 commits

Author SHA1 Message Date
Hauke Mehrtens
a52832164b brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up
This fixes #12927.

SVN-Revision: 35507
2013-02-06 14:57:00 +00:00
Hauke Mehrtens
8ba8225686 brcm47xx: fix detection of Asus RT-N16
This fixes #12936.

SVN-Revision: 35492
2013-02-04 22:49:05 +00:00
Hauke Mehrtens
a1e3c0ca46 Add Failsafe support for Linksys E3000V1 / WRT610NV2
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm.  The list of devices will need to
be expanded.  Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists?  Could
a similar method be used in "/etc/init.d/netconfig"?

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35491
2013-02-04 22:40:57 +00:00
Hauke Mehrtens
c2198aba32 brcm47xx: Fix switch config on 4716/53115 devices
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 35490
2013-02-04 22:38:37 +00:00
Hauke Mehrtens
68aeb7af8e brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe.
SVN-Revision: 35341
2013-01-27 21:48:28 +00:00
Hauke Mehrtens
e083c7926b brcm47xx: create image for Netgear WNDR3400 V1
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
Hauke Mehrtens
05623aebef brcm47xx: add initial board detection code
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
Hauke Mehrtens
a83d7bb109 brcm47xx: add gpio to irq function again
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
Hauke Mehrtens
76c12ff797 brcm47xx: change generic profiles
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
Hauke Mehrtens
2bf03f971d brcm47xx: BCMA - Update default IRQ assignment per upstream change
Update the default IRQ assignment for unrecognized devices per
the upstream change.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35121
2013-01-12 15:00:01 +00:00
Hauke Mehrtens
548cb59826 brcm47xx: update bgmac driver to the version in mainline kernel
SVN-Revision: 35083
2013-01-10 14:22:19 +00:00
Hauke Mehrtens
885eea1842 kernel: update bcma and ssb to master-2013-01-09 from wireless-testing
SVN-Revision: 35080
2013-01-10 14:05:18 +00:00
Hauke Mehrtens
7b0af8193b brcm47xx: BGMAC Driver corrections
1) Fix what appears to be a logic error in bgmac_phy_advertise.

2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly.  I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35052
2013-01-07 22:51:39 +00:00
Hauke Mehrtens
a105eea1a1 brcm47xx: various fixes and code cleanups for irq code
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34997
2013-01-03 16:56:54 +00:00
Hauke Mehrtens
4443997fd8 brcm47xx: add bgmac driver
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.

Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.

SVN-Revision: 34995
2013-01-03 02:05:22 +00:00
Hauke Mehrtens
8f6bdcffa1 brcm47xx: build b44 as a module
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
Hauke Mehrtens
22d62d311a brcm47xx: run ifup before starting the switch
In addition check_module is not needed, nobody checks the return value.

SVN-Revision: 34993
2013-01-03 01:59:43 +00:00
Hauke Mehrtens
97b2b601c7 brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK).  IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34990
2013-01-03 01:56:13 +00:00
Hauke Mehrtens
f74e847301 brcm47xx: improve IRQ handling for bcma based devices
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34989
2013-01-03 01:55:34 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
Hauke Mehrtens
edc7ab525f brcm47xx: move patches already in the mainline kernel to the front
SVN-Revision: 34987
2013-01-03 01:51:31 +00:00
Hauke Mehrtens
76c767f122 brcm47xx: remove support for kernel version 3.3
SVN-Revision: 34986
2013-01-03 01:48:43 +00:00
Hauke Mehrtens
981b7410f8 brcm47xx: bcma: correct M25P32 serial flash ID
Thank you Rafał Miłecki.

SVN-Revision: 34900
2012-12-27 19:18:40 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Mirko Vogt
439a869090 Do not overload mount-call - trying to reduce confusion
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Hauke Mehrtens
4901ac8225 brcm47xx: improve suppressing printing if a module was found in preinit function.
Thank you Bastian Bittorf

SVN-Revision: 34680
2012-12-14 22:45:12 +00:00
Hauke Mehrtens
6c8efbfdc0 brcm47xx: Additional BCM4716 support
Additional BCM4716 support.  Still needs working ethernet driver.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34672
2012-12-13 18:57:38 +00:00
Hauke Mehrtens
6672d869da brcm47xx: BCMA - Broadcom 2011 SDK Updates
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34670
2012-12-13 18:54:04 +00:00
Hauke Mehrtens
97d22306da brcm47xx: return the real irq number in bcma_core_irq
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34669
2012-12-13 18:51:10 +00:00
Hauke Mehrtens
71712ec522 brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way.
SVN-Revision: 34655
2012-12-13 00:12:42 +00:00
Hauke Mehrtens
5be97468f6 brcm47xx: use kernel 3.6.10 by default now
SVN-Revision: 34654
2012-12-13 00:11:55 +00:00
Hauke Mehrtens
235c065e12 brcm47xx: suppress printing if a module was found in preinit function.
SVN-Revision: 34653
2012-12-13 00:11:11 +00:00
Hauke Mehrtens
3a4a6cfd64 kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
Hauke Mehrtens
1bd8db0bd6 kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing
SVN-Revision: 34651
2012-12-12 22:42:18 +00:00
Florian Fainelli
512baafc6b kernel/3.3: move OHCI and EHCI platform drivers to generic
These patches are not specific to bcm47xx and will be used on other
platforms as well.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34501
2012-12-05 14:18:05 +00:00
Hauke Mehrtens
2ac9ac5163 brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Hauke Mehrtens
efd00e6240 brcm47xx: fix title of Bcm4705-wl profile
SVN-Revision: 34378
2012-11-25 16:41:00 +00:00
Hauke Mehrtens
a3d976aff5 brcm47xx: add profile for bcm4705 with wl driver
SVN-Revision: 34336
2012-11-25 16:15:27 +00:00
Hauke Mehrtens
aa8e887a46 brcm47xx: whitespace cleanups
SVN-Revision: 34329
2012-11-25 14:03:51 +00:00
Hauke Mehrtens
be77f9951c brcm47xx: fix cpu clock detection on ASUS WL-520gU
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.

This fixes #4083.

SVN-Revision: 34325
2012-11-24 20:28:06 +00:00
Hauke Mehrtens
264873b3c5 brcm47xx: watchdog: deactivate NOWAYOUT.
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.

This will fix #11724.

SVN-Revision: 34324
2012-11-24 20:24:27 +00:00
Hauke Mehrtens
c62d86ecb8 brcm47xx: update watchdog driver
This watchdog driver should work with SoC having a PMU.

This fixes #11720.

SVN-Revision: 34323
2012-11-24 20:07:25 +00:00
Hauke Mehrtens
4fa5781a95 kernel: refresh patches
SVN-Revision: 34253
2012-11-18 21:40:30 +00:00
Hauke Mehrtens
86cc79ac98 brcm47xx: add support for kernel 3.6
This is based on the patch by Peter Wagner.

SVN-Revision: 34252
2012-11-18 21:27:00 +00:00
Hauke Mehrtens
485f9573f8 brcm47xx: revert r33935: check for .ELF header in partition parser
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420.
With the patch the linux partition also contained the loader which is in the first 128KB.

SVN-Revision: 34201
2012-11-15 16:39:45 +00:00
Hauke Mehrtens
31541f81c3 brcm47xx: remove double definition of kmod-tg3 added in r34150
SVN-Revision: 34176
2012-11-12 21:34:00 +00:00
Hauke Mehrtens
bac93bdd8e brcm47xx: fix cfe config detection on WGT634U broken in r33920
Thanks Russell Senior for reporting this.

SVN-Revision: 34175
2012-11-12 21:32:33 +00:00
Hauke Mehrtens
cadd36a303 brcm47xx: remove ssb-gige package
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.

SVN-Revision: 34150
2012-11-11 17:30:33 +00:00
Imre Kaloz
702fd5cdb5 generate images for the D-Link DWL-3150 as well
SVN-Revision: 33961
2012-10-27 09:42:58 +00:00
Hauke Mehrtens
6a699a8ae8 brcm47xx: check for .ELF header in partition parser
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.

This closes #11420

Thank you b.sander for the patch.

SVN-Revision: 33935
2012-10-25 19:49:20 +00:00
Hauke Mehrtens
dca633f1c8 kernel: update bcma and ssb to master-2012-10-18 from wireless-testing
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx

SVN-Revision: 33920
2012-10-25 14:33:47 +00:00
Jonas Gorski
0d2cf5f9e3 kernel: move the bcma fallback sprom fix to generic
bcm63xx needs the bcma fallback sprom fix, too.

SVN-Revision: 33896
2012-10-23 10:57:49 +00:00
John Crispin
6993e19532 drop GPIODEV platform code
SVN-Revision: 33825
2012-10-17 21:53:37 +00:00
Hauke Mehrtens
07234dc8bd bcma: do not initialize deactivated PCIe cores
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.

SVN-Revision: 33620
2012-10-04 15:45:54 +00:00
Hauke Mehrtens
2819890839 use memcmp in mem size detection as suggested by blogic
SVN-Revision: 33619
2012-10-04 15:42:12 +00:00
Hauke Mehrtens
642fe7f10a bcma: use fallback sprom if sprom on card was not valid
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

SVN-Revision: 33601
2012-09-30 11:45:31 +00:00
Hauke Mehrtens
42952fd94f bcma: initialize sprom earlier
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.

SVN-Revision: 33600
2012-09-30 11:44:44 +00:00
Hauke Mehrtens
2d40590a23 run make kernel_oldconfig
SVN-Revision: 33599
2012-09-30 11:44:04 +00:00
Hauke Mehrtens
e5eefed084 ignore the last page on bcma based SoCs
SVN-Revision: 33598
2012-09-30 11:43:40 +00:00
Hauke Mehrtens
c9feffc332 Fix reading sprom from nvram without a prefix
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.

SVN-Revision: 33597
2012-09-30 11:43:13 +00:00
Hauke Mehrtens
4d5c75a54e improve the check for the memory size
This will hopefully fix bug #9360 and #9097 in trunk.

SVN-Revision: 33596
2012-09-30 11:42:16 +00:00
Hauke Mehrtens
0818180715 activate failsafe on all ports of the switch and not just port 0.
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.

SVN-Revision: 33544
2012-09-25 14:04:59 +00:00
Hauke Mehrtens
fd7b2b5141 deactivate mips wait instruction for MIPS 74K on Broadcom SoCs
When not removing support for the wait instruction, when ruining on the
BCM4706 SoC the system stops after msleep() without an exception. I
haven't seen this problem on the other Broadcom SoCs with a 74K CPU,
but in the Broadcom SDK it is deactivated for all CPUs of this type.

SVN-Revision: 33496
2012-09-20 14:51:57 +00:00
Florian Fainelli
57bd95734d brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package
The package block-hotplug doesn't exist, refer to block-mount instead.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33474
2012-09-19 15:13:33 +00:00
Hauke Mehrtens
db18fa388d update fix-boot patch.
Do not change the code any more but use the kconfig options

SVN-Revision: 33463
2012-09-19 10:18:36 +00:00
Hauke Mehrtens
eeb3ad1860 update gpio patches
SVN-Revision: 33462
2012-09-19 10:17:51 +00:00
Gabor Juhos
43147ffec5 generic: move GENERIC_PWM symbol into the generic config
SVN-Revision: 33383
2012-09-13 06:38:31 +00:00
Hauke Mehrtens
95c141aaac add gpio sysfs entries
This fixes #10256

SVN-Revision: 33369
2012-09-11 15:04:20 +00:00
Hauke Mehrtens
847afa343f update profiles
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder

SVN-Revision: 33235
2012-08-22 21:54:06 +00:00
Hauke Mehrtens
3133d4d8de remove unused file
SVN-Revision: 33210
2012-08-18 15:45:18 +00:00
Hauke Mehrtens
9eaee85cc2 make brcm47xx build only with bcma or only with ssb support.
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.

SVN-Revision: 33209
2012-08-18 14:08:35 +00:00
Hauke Mehrtens
f4d6baf498 update gpio patches
SVN-Revision: 33208
2012-08-18 11:51:35 +00:00
Hauke Mehrtens
a0fb060211 update tg3 driver
SVN-Revision: 33004
2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da generate image for Linksys e3200
SVN-Revision: 33003
2012-08-05 13:14:00 +00:00
Hauke Mehrtens
a71f347c30 brcm47xx: update gpio patch
SVN-Revision: 33001
2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code
SVN-Revision: 33000
2012-08-05 12:39:15 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
SVN-Revision: 32992
2012-08-04 19:46:25 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
2012-07-26 15:42:18 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk
SVN-Revision: 32862
2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk
SVN-Revision: 32861
2012-07-25 15:50:33 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
SVN-Revision: 32845
2012-07-25 14:52:00 +00:00
Hauke Mehrtens
45d55161a6 kernel: bcma: update to version from wireless-testing tag master-2012-07-11
SVN-Revision: 32670
2012-07-11 22:17:05 +00:00
Hauke Mehrtens
bd9fa13c73 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02
SVN-Revision: 32580
2012-07-02 23:12:58 +00:00
Felix Fietkau
50958f5e03 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

SVN-Revision: 32395
2012-06-16 21:06:33 +00:00
John Crispin
a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Hauke Mehrtens
c63ef04874 brcm47xx: fix nvram read out on devices with serial flash
detect nvram on Linksys E3200

SVN-Revision: 31790
2012-05-18 16:04:10 +00:00
Hauke Mehrtens
7ad663dda6 brcm47xx: bcma: fix null pointer
SVN-Revision: 31789
2012-05-18 15:46:30 +00:00
Hauke Mehrtens
b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3
SVN-Revision: 31788
2012-05-18 15:45:51 +00:00
Hauke Mehrtens
7be88d2ad8 brcm47xx: some fixes for the USB driver
SVN-Revision: 31787
2012-05-18 15:44:25 +00:00
Hauke Mehrtens
273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
SVN-Revision: 31772
2012-05-17 13:22:38 +00:00
Hauke Mehrtens
3491d8c017 brcm47xx: remove support for kernel 3.2
SVN-Revision: 31771
2012-05-17 13:20:10 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Hauke Mehrtens
482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens
5acb0b72be brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
2012-05-12 23:59:12 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Hauke Mehrtens
d30f8da466 brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
2012-05-06 20:44:37 +00:00
Hauke Mehrtens
8c352ff853 brcm47xx: update target to kernel 3.3
SVN-Revision: 31599
2012-05-05 12:53:37 +00:00
Hauke Mehrtens
22b2e3fbb9 brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
2012-05-03 20:18:41 +00:00
Hauke Mehrtens
d7b7b99d6e brcm47xx: BCMA - Modified PCI CFG space access
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch

SVN-Revision: 31481
2012-04-25 20:32:17 +00:00
Hauke Mehrtens
e90d3f1663 brcm47xx: A couple of other (inconsequential) BCMA patches
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31471
2012-04-24 21:56:42 +00:00
Hauke Mehrtens
b07998cf11 brcm47xx: b44 fix workaround detection on some brcm47xx boards
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.

SVN-Revision: 31470
2012-04-24 20:35:46 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski
ee4c47a134 kernel: update linux 3.2 to 3.2.15
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
Hauke Mehrtens
7475bb3dc6 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs.
bcma: use fallback sprom if no on chip sprom is available

SVN-Revision: 31285
2012-04-14 12:12:22 +00:00
Hauke Mehrtens
6af575967c kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing
SVN-Revision: 31278
2012-04-13 19:35:40 +00:00
Hauke Mehrtens
c75e700d42 brcm47xx: remove support for kernel 3.0
SVN-Revision: 31276
2012-04-13 16:53:16 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Hauke Mehrtens
de0527a354 brcm47xx: fix memory leak, backport from the mainline kernel
SVN-Revision: 31143
2012-03-29 15:44:06 +00:00
Hauke Mehrtens
9992ce3a51 brcm47xx: add missing breaks into the nvram read code in the switch case statements
SVN-Revision: 31142
2012-03-29 15:43:16 +00:00
Hauke Mehrtens
13b6ec1d05 brcm47xx: update flash drivers
SVN-Revision: 31126
2012-03-28 17:03:18 +00:00
Hauke Mehrtens
2f6e19e203 brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name
Eliminate unneeded procedure by incorporating code into bcma_device_name

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31120
2012-03-28 09:36:50 +00:00
Hauke Mehrtens
a31a9b8650 brcm47xx: BCMA - Always map 4 bytes
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.

Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31119
2012-03-28 09:35:01 +00:00
Hauke Mehrtens
a5abb08100 brcm47xx: update sprom patches like they are in the mainline kernel
SVN-Revision: 31093
2012-03-27 17:07:28 +00:00
Hauke Mehrtens
6fd915ba37 brcm47xx: update usb driver to the version send for mainline kernel integartion
SVN-Revision: 31089
2012-03-27 15:38:56 +00:00
Gabor Juhos
c1dc6df8bd kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
Felix Fietkau
db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Hauke Mehrtens
cee31ca238 brcm47xx: add support for NAND flash on devices using bcma
This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2.

Thank you Tathagata Das <tathagata@alumnux.com> for the patch

SVN-Revision: 30943
2012-03-14 22:59:39 +00:00
Hauke Mehrtens
7fee567dc0 brcm47xx: move and rename the patches
The patches are now grouped by the part what they are doing and are using three digest numbers.

This does not remove or adds anything

SVN-Revision: 30942
2012-03-14 21:48:23 +00:00
Hauke Mehrtens
067a065305 brcm47xx: make patch apply
SVN-Revision: 30876
2012-03-11 13:36:46 +00:00
Hauke Mehrtens
7dcdf69388 brcm47xx: BCMA - Find names of non BCM cores
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 30875
2012-03-11 12:55:20 +00:00
Hauke Mehrtens
d6d40b2d60 BCMA - Account for variable PCI memory base/size
Thank you Nathan Hintz for the patch

SVN-Revision: 30874
2012-03-11 12:52:43 +00:00
Hauke Mehrtens
bbf739a59f BCMA - Reorder SPROM fill
The SPROM is initialized in bcm47xx_fill_sprom, so move the call to bcm47xx_fill_sprom_ethernet after it.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 30873
2012-03-11 11:50:59 +00:00
Gabor Juhos
9698a499b6 kernel: update linux 3.2 to 3.2.9
SVN-Revision: 30767
2012-03-01 19:49:02 +00:00
Hauke Mehrtens
12537aa190 brcm47xx: use kernel 3.2 by default
SVN-Revision: 30751
2012-02-28 20:12:46 +00:00
Hauke Mehrtens
5dec9dd3b2 brcm47xx: add code to generate images for some netgear devices
This is commented out until we get report of working devices.

SVN-Revision: 30639
2012-02-18 23:21:47 +00:00
Hauke Mehrtens
1122b231f9 brcm47xx: sprom for nvram parsing
This adds support for parsing sprom form nvram for sprom version form 1 to 9.
It also adds sprom from nvram support for devices on the bcma bus.

SVN-Revision: 30638
2012-02-18 23:08:26 +00:00
Hauke Mehrtens
30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
SVN-Revision: 30488
2012-02-12 22:41:20 +00:00
Hauke Mehrtens
e7bd7f7e85 brcm47xx: activate config bug to show warnings
SVN-Revision: 30487
2012-02-12 22:40:01 +00:00
Hauke Mehrtens
fa21aef5ab brcm47xx: refresh patches
SVN-Revision: 30481
2012-02-12 16:45:27 +00:00
Hauke Mehrtens
838c363886 brcm47xx: update usb driver for brcm47xx.
SVN-Revision: 30480
2012-02-12 16:38:10 +00:00
Hauke Mehrtens
295a154f2f brcm47xx: print the chip id and rev found by ssb and bcma
SVN-Revision: 30428
2012-02-10 22:42:43 +00:00
Hauke Mehrtens
4e332227d0 brcm47xx: update bcm5354 support patch
SVN-Revision: 30423
2012-02-10 17:22:26 +00:00
Jonas Gorski
e67f4477bb kernel: update linux 3.0 to 3.0.18
SVN-Revision: 29965
2012-01-31 09:43:53 +00:00
Hauke Mehrtens
d1c07b3657 brcm47xx: add fix for cardbus host controller
These devices have two devices on the bus, the host controller itself and the device.

SVN-Revision: 29923
2012-01-27 20:10:51 +00:00
Hauke Mehrtens
26d4e1876c brcm47xx: add support for pcie host controller on bcma based SoCs.
This also adds minimal support for the BCMA43224 pcie wireless card.

SVN-Revision: 29843
2012-01-21 22:39:20 +00:00
Hauke Mehrtens
034cf5643f brcm47xx: add support for kernel 3.2
SVN-Revision: 29756
2012-01-15 21:18:34 +00:00
Hauke Mehrtens
c3d134af12 brcm47xx: run kernel_oldconfig
SVN-Revision: 29755
2012-01-15 14:53:32 +00:00
Hauke Mehrtens
d5bc3a994b brcm47xx: update usb driver
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.

SVN-Revision: 29734
2012-01-13 20:11:23 +00:00
Jonas Gorski
e49d3e1d5b kernel: update linux 3.0 to 3.0.17
SVN-Revision: 29725
2012-01-13 14:10:44 +00:00
Hauke Mehrtens
11125d68ed brcm47xx: fix usb on more recent bcma based devices.
SVN-Revision: 29605
2011-12-23 17:21:52 +00:00
Hauke Mehrtens
0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
2011-12-19 23:55:20 +00:00
Hauke Mehrtens
5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
2011-12-19 23:39:13 +00:00
Hauke Mehrtens
1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
SVN-Revision: 29574
2011-12-19 23:33:03 +00:00
Hauke Mehrtens
91d0ef6f19 brcm47xx: remove support for kernel 2.6.39
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
2011-12-19 23:26:15 +00:00
Jonas Gorski
6e2ae90f4a linux: update 3.0 to 3.0.12
SVN-Revision: 29469
2011-12-06 19:50:25 +00:00
Jonas Gorski
8bac0df4ae linux: update 3.0 to 3.0.9
SVN-Revision: 29264
2011-11-19 18:39:12 +00:00
Jo-Philipp Wich
de7cae82e9 brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit
SVN-Revision: 28585
2011-10-25 16:19:52 +00:00
Jo-Philipp Wich
a9e64493d8 target: globally disable BSD process accounting
SVN-Revision: 28584
2011-10-25 16:18:36 +00:00
Florian Fainelli
3802769ea1 add vlan definitions for Siemens SE505v2
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

SVN-Revision: 28336
2011-09-30 12:55:33 +00:00
Felix Fietkau
24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default
SVN-Revision: 28125
2011-08-29 21:23:51 +00:00
Hauke Mehrtens
464539b074 kernel: update to version 3.0.3
SVN-Revision: 28043
2011-08-18 12:54:12 +00:00
Jo-Philipp Wich
ebb152295b fix the default network configuration for the ASUS WL-330gE (#8751)
SVN-Revision: 28024
2011-08-17 03:16:59 +00:00
Hauke Mehrtens
77218b0338 brcm47xx: fix flash detection on chipcommon less devices.
This closes #9906
Thank you for the report Kim

SVN-Revision: 27967
2011-08-12 16:37:22 +00:00
Hauke Mehrtens
51be984655 kernel: update to kernel version 3.0.1
SVN-Revision: 27918
2011-08-06 09:51:55 +00:00
Hauke Mehrtens
77966b81d8 brcm47xx: use kernel 3.0
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.

SVN-Revision: 27906
2011-08-04 20:10:24 +00:00
Hauke Mehrtens
8428ebd8e8 brcm47xx: update patches
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates

SVN-Revision: 27902
2011-08-04 20:04:54 +00:00
Hauke Mehrtens
4815eaa4c3 brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.

SVN-Revision: 27758
2011-07-24 15:18:29 +00:00
Hauke Mehrtens
49f4d4217e brcm47xx: build bcma into the kernel
Now we can assume that every brcm47xx kernel has the bcma module build
into the kernel. This is not needed for this version as this does not
support bcma as system bus but kernel 3.0 will.

SVN-Revision: 27733
2011-07-23 11:19:58 +00:00
Hauke Mehrtens
b07b5fc7b6 brcm47xx: remove old kernel versions
SVN-Revision: 27724
2011-07-22 18:41:24 +00:00
Hauke Mehrtens
b988168906 brcm47xx: update bcma and ssb to master-2011-07-21
* add new patches for bcm4716 SoC
* add support for serial flash on bcma bus

SVN-Revision: 27723
2011-07-22 16:30:42 +00:00
Hauke Mehrtens
39f491e479 kernel: update to linux-3.0 and refresh patches.
Thank you Peter Wagner for the patch

SVN-Revision: 27722
2011-07-22 16:04:25 +00:00
Hauke Mehrtens
8976fa2622 brcm47xx: deactivate wndr3400 for now as this device will not boot
SVN-Revision: 27316
2011-06-29 17:42:34 +00:00
Hauke Mehrtens
8c62c5d109 brcm47xx: generate image to flash on Netgear WNDR3400.
The image will not boot because serial flash support is missing this is only for experts.

SVN-Revision: 27302
2011-06-28 22:23:21 +00:00
Hauke Mehrtens
4c18da3df6 brcm47xx: add initial support for devices with bcma bus.
Ethernet and wifi are not working and this is highly experimental.

SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
Hauke Mehrtens
3f0eed15a2 kernel: refresh patches for kernel 3.0-rc5
SVN-Revision: 27300
2011-06-28 20:25:39 +00:00
Hauke Mehrtens
2af4f6f634 kernel: update ssb and bcma to linux-next next-20110628
SVN-Revision: 27299
2011-06-28 19:33:50 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2
SVN-Revision: 27298
2011-06-28 19:30:58 +00:00
Hauke Mehrtens
4c392185a6 brcm47xx: update kernel to version 2.6.39
SVN-Revision: 27296
2011-06-27 21:29:20 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627
SVN-Revision: 27295
2011-06-27 21:28:40 +00:00
Hauke Mehrtens
e439de144f brcm47xx: fix Linux-3.0 and fix clock rate detection.
SVN-Revision: 27294
2011-06-27 20:20:11 +00:00
Hauke Mehrtens
47e218c426 brcm47xx: refresh patches
SVN-Revision: 27219
2011-06-18 15:53:14 +00:00
Hauke Mehrtens
79a7343560 kernel: update to kernel 2.6.38.8
SVN-Revision: 27218
2011-06-18 15:52:15 +00:00
Hauke Mehrtens
75f9e0c615 brcm47xx: add support for kernel 3.0
SVN-Revision: 27217
2011-06-18 15:24:44 +00:00
Hauke Mehrtens
bf64ac730a bcm47xx: Remove kernel checks from image Makefile
2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the
2.6 check will break with 3.0, remove it alltogether.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27185
2011-06-15 21:11:49 +00:00
Hauke Mehrtens
8137e35a5d brcm47xx: initial 2.6.39 support for brcm47xx
Thank you Peter Wagner for the patch

SVN-Revision: 27008
2011-05-25 19:27:08 +00:00
Hauke Mehrtens
f5f989e3fb brcm47xx: remove old kernel
SVN-Revision: 27006
2011-05-25 18:05:54 +00:00
Hauke Mehrtens
06166b01dd brcm47xx: fix partition layout on SimpleShare devices.
The flash driver code should be cleaned up and the broad detection code should be placed into arch code and used here.

This fixes #9323

Thank you Will Holmes for the patch.

SVN-Revision: 27005
2011-05-25 17:46:34 +00:00
Hauke Mehrtens
732abc44cc brcm47xx: update patches
SVN-Revision: 26846
2011-05-07 12:49:17 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.
SVN-Revision: 26829
2011-05-05 14:05:21 +00:00
Hauke Mehrtens
54fb8868fa brcm47xx: fix typo in patch
SVN-Revision: 26828
2011-05-05 13:18:35 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom.
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
Hauke Mehrtens
8b837430f3 brcm47xx: upgrade to kernel 2.6.27.6.
This should be save now.

SVN-Revision: 26533
2011-04-08 15:12:08 +00:00
Hauke Mehrtens
340c6914a3 brcm47xx: add initial support for kernel 2.6.38
SVN-Revision: 26524
2011-04-07 21:38:41 +00:00
Hauke Mehrtens
8d75dcb4b8 brcm47xx: remove kmod-usb-ohci from WGT634U packages.
This package creates some error messages on startup

Thank you russell-- for reporting

SVN-Revision: 26240
2011-03-19 23:19:08 +00:00
Imre Kaloz
a8d84ae94d remove 2.6.34 support
SVN-Revision: 26229
2011-03-18 13:40:48 +00:00
Hauke Mehrtens
537c6017cc brcm47xx: add workaround for fuse again.
This closes #4754

SVN-Revision: 26141
2011-03-13 19:25:24 +00:00
Hauke Mehrtens
a08bd03fad ssb: update ssb to version from linux-next-20110311
SVN-Revision: 26127
2011-03-13 17:24:28 +00:00
Hauke Mehrtens
4226f1d373 kernel: update to kernel version 2.6.37.3
SVN-Revision: 26126
2011-03-13 17:14:08 +00:00
Hauke Mehrtens
425bf41b23 kernel: update to kernel version 2.6.34.8
SVN-Revision: 26125
2011-03-13 17:13:11 +00:00
Florian Fainelli
45c9f5e75e update to kernel 2.6.36.4
SVN-Revision: 25580
2011-02-19 12:44:07 +00:00
Imre Kaloz
2821101c92 platform specific patches don't belong here - take #2
SVN-Revision: 25085
2011-01-24 12:11:25 +00:00