openwrtv4

Author	SHA1	Message	Date
John Crispin	c4413b6e08	ramips: unbreak asiarf dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37561	2013-07-26 15:19:19 +00:00
Gabor Juhos	e9688455f6	kernel: update 3.10 to 3.10.3 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37546	2013-07-26 07:19:58 +00:00
John Crispin	04aaf7a03e	ramips: disable hg255d Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37532	2013-07-25 17:03:08 +00:00
John Crispin	7feebeb193	ramipe: disable HG255D support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37531	2013-07-25 16:55:48 +00:00
John Crispin	9b2c7be0c4	ramips: important patch for HG255D r37505 add support for Huawei HG255D, but it only tested under a community hacked u-boot ("lintel u-boot"), which has a different mtd layout compared to origin one. If you install it on a box with origin u-boot, the origin factory part will be destroyed, and your wifi interface will never up!!! This patch shrink firmware part in mtd layout to exclude origin factory part, and I will prepare another patch to fix the eeprom extract issue for box with origin u-boot. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37530	2013-07-25 16:01:58 +00:00
John Crispin	3ad136d9e3	ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board. http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html Signed-off-by Jon Smirl <jonsmirl@gmail.com> SVN-Revision: 37521	2013-07-24 08:54:41 +00:00
John Crispin	3f3cac6136	ramips: fix HG255D VLAN initial detect issue Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37517	2013-07-23 13:07:00 +00:00
John Crispin	0cc1e2acb4	ramips: Add support for Huawei HG255D in trunk HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them. This patch is tested to work except trivial LED issues. Signed-off-by: Leon Xu <ylxu72@gmail.com> SVN-Revision: 37505	2013-07-22 15:36:39 +00:00
Gabor Juhos	ef944dcb85	kernel: update 3.10 to 3.10.2 Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37502	2013-07-22 15:31:13 +00:00
John Crispin	8d0cd50f30	ralink: set remove dwc_otg from default packages and use dwc2 instead Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37499	2013-07-22 13:52:52 +00:00
John Crispin	ffe389c4c5	ralink: remove dwc_otg from modules.mk Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37498	2013-07-22 13:52:44 +00:00
John Crispin	5525b2136e	ralink: set v3.10 as default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37497	2013-07-22 13:52:32 +00:00
Jonas Gorski	b1b4e7db13	kernel: move CONFIG_NET_IP_TUNNEL to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37465	2013-07-19 22:58:01 +00:00
John Crispin	8028fb8096	ramips: add sysupgarde support for wl-330n3g https://dev.openwrt.org/ticket/13891 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37376	2013-07-17 09:44:57 +00:00
John Crispin	dd22304691	ramips: make the old dwc driver depend on v3.9 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37357	2013-07-15 21:06:03 +00:00
John Crispin	072e1a254c	ramips: add v3.10 kernel config files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37356	2013-07-15 21:05:58 +00:00
John Crispin	cb6375c20a	ramips: fix ehci/ohci OF binding Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37354	2013-07-15 21:05:47 +00:00
John Crispin	12a099eb07	ramips: update dtsi files to work with dwc2 driver Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37353	2013-07-15 21:05:42 +00:00
John Crispin	e8ebcffd02	ramips: add a explicit reset to dwc2 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37352	2013-07-15 21:05:36 +00:00
John Crispin	bd78f2b56e	ramips: add a patch to make dwc2 work with boards that have an old bootloader Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37339	2013-07-15 11:34:13 +00:00
John Crispin	a0de18807b	ramips: add ralink v3.10 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37331	2013-07-15 10:06:55 +00:00
John Crispin	f7cf157712	ramips: disable ill_acc driver by default The driver seems to be causoing boot rpoblems on some SoCs Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37314	2013-07-14 18:01:00 +00:00
John Crispin	89c0392736	ralink: drop v3.8 support Signed-off-by: John Crispin <blogic@opewnrt.org> SVN-Revision: 37311	2013-07-14 18:00:34 +00:00
Hauke Mehrtens	e574f75d16	kernel: update to kernel 3.9.10 and refresh patches SVN-Revision: 37274	2013-07-13 22:43:10 +00:00
John Crispin	099188695a	ralink: vlan offloading is causing problems. disable it Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37203	2013-07-08 16:34:52 +00:00
John Crispin	a6091a5c71	ralink: unbreak ralink i2c support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37202	2013-07-08 09:01:57 +00:00
John Crispin	a154693bab	ralink: add i2c-ralink kmod info Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37200	2013-07-08 09:01:47 +00:00
John Crispin	2da37a713e	ramips: fix RT-N13U gpio buttons https://dev.openwrt.org/ticket/13795 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37163	2013-07-04 13:31:23 +00:00
Felix Fietkau	5986a18c16	ramips: update wlan firmware hotplug script for new eeprom size Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37112	2013-06-30 21:03:48 +00:00
Jonas Gorski	0d9f760f27	kernel: update linux 3.9 to 3.9.8 Includes memory allocation fixes as well as several networking fixes. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37103	2013-06-30 13:10:12 +00:00
John Crispin	6875316646	ramips: unbreak initramfs generation Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37080	2013-06-29 08:41:03 +00:00
John Crispin	77b9fd52a6	ramips: fix ethernet driver make sure the driver does not crash under load Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37058	2013-06-28 11:22:11 +00:00
Florian Fainelli	6a4f2922f6	targets: prepare for supporting normal and initramfs images In order to support both normal images and initramfs, ensure that each target sets KERNELNAME properly so that the generic kernel building code can copy the corresponding files over $(KDIR) with the appropriate extension. Update the various paths to the kernel and wrapper images from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo). Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 37049	2013-06-27 19:58:31 +00:00
John Crispin	36209234ab	ramips: fix rt2x00 ethernet compile bug Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37043	2013-06-27 16:45:40 +00:00
John Crispin	0d4e00c337	ramips: add missing symbols to rt288x config Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37042	2013-06-27 16:45:26 +00:00
John Crispin	1706c8d29a	ramips: fix ethernet stability issue introduced by recent kernel upgrade Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37041	2013-06-27 16:28:06 +00:00
John Crispin	5063f712a6	ramips: move ESW reset to preinit on RT305x/RT5350 RT305x/RT5350 SoCs require the switch to be reset before touching the ethernet interface, otherwise the driver will panic. As we already init the ethernet in preinit we therefor need to reset the switch before that. Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 37027	2013-06-24 12:39:28 +00:00
John Crispin	d3723f93c6	ramips: make rt3883 usb work properly Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37024	2013-06-24 12:06:56 +00:00
John Crispin	dca18caa79	ramips: revert gpio regulator dts update Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37021	2013-06-24 11:09:50 +00:00
John Crispin	55fb6f3a05	ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016	2013-06-23 15:50:49 +00:00
John Crispin	67f5f188b1	base-files: input/button drivers get loaded before preinit by procd Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37000	2013-06-21 16:53:47 +00:00
John Crispin	e6ef318802	base-files: diag does not need to insmod any drivers, procd already did it for us Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36999	2013-06-21 16:53:43 +00:00
John Crispin	fc9532aeaa	ramips: add HAME MPR-A2 support This patch adds support for HAME MPR-A2 router using a DTS file. The platform is Ralink RT5350. http://wiki.openwrt.org/toh/hame/mpr-a2 Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru> SVN-Revision: 36898	2013-06-10 08:24:56 +00:00
John Crispin	30786d2dd0	ramips: add support for belkin F7C027 wemo/homeautomatisation plug Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 36897	2013-06-10 08:24:50 +00:00
John Crispin	1756047518	ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775	2013-05-30 15:59:56 +00:00
Gabor Juhos	46225b99d9	kernel: update linux 3.8 to 3.8.13 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36724	2013-05-26 16:02:31 +00:00
Jonas Gorski	526aedb705	kernel: move CONFIG_MIPS_SEAD3 to generic Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 36617	2013-05-12 21:41:55 +00:00
Gabor Juhos	e57c7d6c12	kernel: update linux 3.8 to 3.8.12 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36576	2013-05-08 08:53:53 +00:00
John Crispin	036fb79052	ramips: drop 3.7 support Signed-off-by; John Crispin <blogic@openwrt.org> SVN-Revision: 36572	2013-05-07 10:58:44 +00:00
John Crispin	16a17b318a	ramips: properly setup the FEATURES variable Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36571	2013-05-07 10:58:30 +00:00
John Crispin	bd6e12d904	ramips: fix memory detection rt5350 Signed-off-by: Felix Kaechele <felix@fetzig.org> SVN-Revision: 36568	2013-05-06 18:23:56 +00:00
John Crispin	899120ddef	ramips: enable dsp extensions for rt305x and rt3883 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36567	2013-05-06 16:45:59 +00:00
John Crispin	849ff98669	ramips: fix fypo in ethernet driver rt288x, rt3883 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36565	2013-05-06 16:45:43 +00:00
John Crispin	eddd7f5773	ramips: Update ARC Freestation profile These devices are actually built around the 8devices Carambola dev board. ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are supported with this image, see "ARCFlex Firmware Downloads": http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History Funnily enough if present the external USB wlan ends up being wlan-0, with the SoC device being wlan-1. - Invert port map so special handling of vlan config can be removed. - Add LED config similar to original ArcOS firmware. - Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1 - Get MACs from factory partition. - Update description to list supported devices. - Carambola uses RT3050 (not RT3052), though my Carambola CPU actually reports itself as being an RT3350 while still having RT3050F markings. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36564	2013-05-06 16:45:35 +00:00
John Crispin	4f1ff28f08	ramips: Support setting active_low in devicetree gpio-export Support setting active_low in devicetree gpio-export. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36563	2013-05-06 16:45:27 +00:00
John Crispin	6af3b6721b	ralink: unbreak uart pinmux handling Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36562	2013-05-06 16:45:20 +00:00
John Crispin	7c04b3bd66	ramips: fix gpio base numbering make banks 0 based to unbreak userland ABI Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36561	2013-05-06 16:45:12 +00:00
John Crispin	338ff04cab	ramips: add gpio base properties to dtsi files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36560	2013-05-06 16:45:04 +00:00
John Crispin	65760ede8b	ramips: unbreak rt2880 support Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36559	2013-05-06 16:44:56 +00:00
John Crispin	28bdb9efe9	ramips: fix DIR-602D1 flash size Fix DIR-620D1 flash size. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 36558	2013-05-06 16:44:47 +00:00
John Crispin	1c89a60431	ramips: unbreak gpio handling for uart mux group this should fix the handling of corner cases Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36543	2013-05-04 11:36:51 +00:00
Gabor Juhos	8a9fe26f20	kernel: update linux 3.8 to 3.8.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36507	2013-05-01 22:15:18 +00:00
Gabor Juhos	f718179af5	kernel: update linux 3.8 to 3.8.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36493	2013-04-30 10:43:59 +00:00
John Crispin	eff12a630d	ramips: move dlink profile to correct sub folder - 2nd try Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36489	2013-04-30 10:34:20 +00:00
John Crispin	1db4587bc7	ramips: move dlink profile to correct sub folder Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36487	2013-04-30 08:24:26 +00:00
Gabor Juhos	36d4fd70bc	kernel: update linux 3.8 to 3.8.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36453	2013-04-26 16:55:42 +00:00
Gabor Juhos	c63bb1a18e	ramips: rt3883: fix build error Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36451	2013-04-26 16:55:28 +00:00
John Crispin	e141b73f9d	ramips: remove now unneeded user-space board detection Now that ALL5002 and ALL5003 each got their own DTS and board names, remove the now no longer needed user-space part which previously differentiated between ALL5002 and ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3558/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36436	2013-04-25 19:03:05 +00:00
John Crispin	cf3885eb0f	ramips: introduce DTS for ALL5003 Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c. With the change to DTS, this is no longer accurate, as ALL5002 is based on Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding rt5350.dtsi need to be included for ALL5003. Signed-off-by: Daniel Golle <dgolle@allnet.de> Patchwork: http://patchwork.openwrt.org/patch/3557/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36435	2013-04-25 19:03:01 +00:00
John Crispin	978567a89e	ramips: set preinit interface to eth0 by default. This makes any ramips device accessible via ethernet in failsafe mode. Based on: https://dev.openwrt.org/changeset/36322 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3567/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36434	2013-04-25 19:02:57 +00:00
John Crispin	7bfab6e308	ramips: Add Alpha ASL-26555 support. This board uses a TrendChip SOC with its own RAM/Flash for ADSL support. We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN. There are two versions (Chile 8MB and Spain 16MB). Wiki: http://wiki.openwrt.org/toh/alpha/asl26555 Signed-off-by: Esteban Benito <estebanjbs@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3571/ Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36433	2013-04-25 19:02:53 +00:00
John Crispin	c7216d0cab	ramips: Add support of D-link DIR-620D1 Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Acked-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36432	2013-04-25 19:02:48 +00:00
John Crispin	deb3635923	ramips: sync kernel patches with the mips-next tree Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36431	2013-04-25 19:02:42 +00:00
Gabor Juhos	151cadfe32	kernel: update linux 3.8 to 3.8.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36363	2013-04-19 08:07:34 +00:00
John Crispin	e3003ea2a9	fix prepare_generic_squashfs prepare_generic_squashfs was called twice on the generated images breaking mount_root Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36349	2013-04-17 11:54:09 +00:00
John Crispin	8001e6a689	fix rt305x gpio https://dev.openwrt.org/ticket/13359 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36343	2013-04-16 06:58:18 +00:00
Gabor Juhos	604395650a	kernel: update linux 3.8 to 3.8.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36332	2013-04-14 09:25:53 +00:00
John Crispin	d3a46c4b7f	update rt2880 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36327	2013-04-12 18:57:01 +00:00
John Crispin	92259c4803	fix up the rt2880 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36326	2013-04-12 18:56:53 +00:00
John Crispin	a6424245e6	fix RT-N15 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36325	2013-04-12 18:56:44 +00:00
John Crispin	7af1fa46ad	update rt2880.dtsi Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36324	2013-04-12 18:56:36 +00:00
John Crispin	fb47fd0d6b	unbreak portmapping - typo fix Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36293	2013-04-09 14:39:01 +00:00
John Crispin	bc7b310959	move memory detect node to dtsi files Signed-of-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36290	2013-04-09 14:19:36 +00:00
John Crispin	48feea4861	Add Netgear WNCE2001 (OF version) Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide\|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289	2013-04-09 14:19:33 +00:00
John Crispin	e468abcae0	remove bootargs from dts Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36288	2013-04-09 14:19:28 +00:00
John Crispin	82c3b7ce26	add ofpart info to the devicetrees Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36287	2013-04-09 14:19:24 +00:00
John Crispin	f1e9d30ffc	add sample swconfig portmap Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36286	2013-04-09 14:19:20 +00:00
John Crispin	fcd962cc71	set of_node before registring the switch Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36285	2013-04-09 14:19:17 +00:00
Gabor Juhos	130f67210a	ramips: TEW-691GR.dts fixes * fix pinmux settings * remove spi node * add nor-flash node * enable mdio-bus and add phy handle Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36276	2013-04-08 12:34:17 +00:00
Gabor Juhos	a4a148f222	ramips: rt3883: enable the AR8216 driver It is needed for the TEW-69{1,2}GR boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36275	2013-04-08 12:34:15 +00:00
Gabor Juhos	a9d977b2af	ramips: add profile for the Omnima EMB-HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36274	2013-04-08 11:12:04 +00:00
Gabor Juhos	82705b30b3	ramips: OMNI-EMB-HPM.dts fixes * add mdio-bus and phy nodes * set phy-handle for the ethernet node * define flash partiions * cleanup flash node properties Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36273	2013-04-08 11:12:03 +00:00
Gabor Juhos	909fabe574	ramips: add mdio-bus node to rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36272	2013-04-08 11:12:02 +00:00
Gabor Juhos	78ee80f2e8	ramips: fix MDIO/PHY handling Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36271	2013-04-08 11:12:01 +00:00
Gabor Juhos	30e5bae84a	ramips: fix console speed for OMNI-EMB-HPM Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36270	2013-04-08 08:24:51 +00:00
Gabor Juhos	cd7ce5226d	ramips: avoid invalid pointer dereference in pinmux code Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36269	2013-04-08 08:24:50 +00:00
Gabor Juhos	4c85227cf4	ramips: TEW-692GR.dts fixes * fix pinmux settings * remove spi node * add PCI node * add nor-flash node Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36268	2013-04-08 07:11:35 +00:00
Gabor Juhos	97635d7a8e	ramips: add PCI node into RTN56U.dts Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36264	2013-04-07 20:56:22 +00:00
Gabor Juhos	474264f64c	ramips: add PCI node for rt3883.dtsi Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36263	2013-04-07 20:56:21 +00:00
Gabor Juhos	6c8951313c	ramips: rt3883: enable PCI support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36262	2013-04-07 20:56:20 +00:00
Gabor Juhos	b6b0a8fbee	ramips: fix RT3883 PCI driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36261	2013-04-07 20:56:18 +00:00
Gabor Juhos	1700bf5b2e	ramips: refresh patches Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36260	2013-04-07 17:05:05 +00:00
Gabor Juhos	6de8743e44	ramips: add missing cpu-feature-override.h files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36259	2013-04-07 17:05:04 +00:00
Gabor Juhos	68875710fd	ramips: fix broken patch name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36258	2013-04-07 16:26:27 +00:00
Gabor Juhos	16d0ce52b0	ramips: fix polarity of GPIO buttons for RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36257	2013-04-07 16:24:33 +00:00
Gabor Juhos	d1f28c6d1f	ramips: add nor-flash node for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36249	2013-04-07 14:46:11 +00:00
Gabor Juhos	0c3c29ca38	ramips: fix pinmux settings for the RT-N56U Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36248	2013-04-07 14:46:10 +00:00
Gabor Juhos	66fbe78a93	ramips: pinmux fixes Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36247	2013-04-07 14:46:09 +00:00
Gabor Juhos	aedf05caa0	ramips: remove trailing whitespaces from dts files Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36246	2013-04-07 13:32:37 +00:00
Gabor Juhos	017aabe292	ramips: handle PCI interrupts in plat_irq_dispatch Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36245	2013-04-07 13:25:38 +00:00
John Crispin	811f7f9f2d	fix typos inside dts files Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de> SVN-Revision: 36244	2013-04-07 11:47:03 +00:00
John Crispin	709b19ed9f	fix default commandline in dts files Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36243	2013-04-07 11:46:54 +00:00
Gabor Juhos	85675528da	ramips: add cfi_cmdset_0002 patches The parallel flash access on the RT-N56U is broken without those patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36242	2013-04-07 11:37:15 +00:00
Gabor Juhos	10d8e4b66c	ramips: remove top-level {address,size}-cells properties from .dts files Those are defined in the SoC specific .dtsi files. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36237	2013-04-07 08:19:10 +00:00
Gabor Juhos	756b810178	ramips: fix ethernet switch node in DIR-645.dts Fix a typo in the node name and add vendor prefix for the compatible string. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36231	2013-04-06 17:19:35 +00:00
Gabor Juhos	1ef39b43dd	ramips: remove spi node from RTN56.dts The RT-N56U board uses a parallel flash. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36223	2013-04-06 12:37:40 +00:00
Gabor Juhos	d57e662cda	ramips: fix ethernet switch node in RTN56U.dts The RT-N56U uses an RTL8367M switch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36222	2013-04-06 12:37:38 +00:00
Gabor Juhos	4becd8590c	ramips: rt3883: enable the RTL8367 driver That is needed by the Asus RT-N56U board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36221	2013-04-06 12:37:37 +00:00
Gabor Juhos	348640f4b3	ramips: rt3883: sync 3.8 config Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36217	2013-04-06 12:37:31 +00:00
John Crispin	d16de0b69f	fix typo pinmmux -> pinmux Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36216	2013-04-06 11:46:34 +00:00
Gabor Juhos	f78c902cfd	kernel: update linux 3.8 to 3.8.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36215	2013-04-06 11:40:44 +00:00
John Crispin	df7af06f1f	fix dir-615 h1 network config http://patchwork.openwrt.org/patch/3527/ Signed-off-by: Daniel Petre <dani@ip6.ro> SVN-Revision: 36213	2013-04-05 23:37:45 +00:00
John Crispin	e1a74d8ff7	fix typo that made gpiomuxing fail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36212	2013-04-05 23:10:42 +00:00
John Crispin	93899a1329	add profile for tenda w150m board http://patchwork.openwrt.org/patch/3371/ Signed-off-by: Chi Zhang <zhangchi866@gmail.com> SVN-Revision: 36176	2013-04-03 10:00:21 +00:00
John Crispin	7e54357bd5	fix ALL5002 default package selection Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36175	2013-04-03 10:00:16 +00:00
John Crispin	37401dca92	Build WW factory image for DAP-1350 http://patchwork.openwrt.org/patch/3466/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36174	2013-04-03 10:00:12 +00:00
John Crispin	910b705155	add Huawei D105 http://patchwork.openwrt.org/patch/3510/ Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 36173	2013-04-03 10:00:08 +00:00
John Crispin	c1710901c5	add profile for the Edimax 3g-6200NL board http://patchwork.openwrt.org/patch/3214/ Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net> SVN-Revision: 36172	2013-04-03 10:00:03 +00:00
John Crispin	f3643374c4	there is no ttyS1 console Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36171	2013-04-03 09:59:59 +00:00
John Crispin	99e0ff1123	make v3.8 the default Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36170	2013-04-03 09:59:55 +00:00
John Crispin	c8d5f5e0ef	add new image/Makefile Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36169	2013-04-03 09:59:51 +00:00
John Crispin	770b28f146	add the dts files that describe the boards in future Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36168	2013-04-03 09:59:46 +00:00
John Crispin	2328e8389e	fix upvel profile names Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36167	2013-04-03 09:59:41 +00:00
John Crispin	94972a5268	fix rt3883 config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36166	2013-04-03 09:59:37 +00:00
John Crispin	0716ae8abe	fix rt305x config-3.8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36165	2013-04-03 09:59:33 +00:00
John Crispin	dce4945972	mark rt288x broken until the test hardware arrives in the mail Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36164	2013-04-03 09:59:16 +00:00
John Crispin	46f141637c	add patches for v3.8 Signed-off-by: John Crsipin <blogic@openwrt.org> SVN-Revision: 36163	2013-04-03 09:59:10 +00:00
John Crispin	4f86ea43ca	remove old ralink 3.8 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36162	2013-04-03 09:58:48 +00:00
John Crispin	d4db00205d	move files to files-3.7 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36161	2013-04-03 09:58:44 +00:00
John Crispin	86a691144b	add feature gpio Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36160	2013-04-03 09:58:37 +00:00
Gabor Juhos	07532dca7f	kernel: update linux 3.8 to 3.8.3 Also refresh the related generic/platform patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36039	2013-03-15 14:39:51 +00:00
John Crispin	b22cbac68f	make sure errors get sent to /dev/null Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 35988	2013-03-12 13:52:40 +00:00
Gabor Juhos	fe3df4b593	ramips: add profile and build image for the Upvel UR-326N4G board Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35972	2013-03-11 21:02:45 +00:00
Gabor Juhos	d543f4b771	ramips: add user-space support for the Upvel UR-326N4G board [juhosg: fix mac address setup] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35971	2013-03-11 21:02:43 +00:00
Gabor Juhos	3c2ef04a0e	ramips: add kernel support for the Upvel UR-326N4G board [juhosg: add missing symbols to config-3.{7,8}] Patch from: Дмитрий Лебедев <lebedev@trendnet.ru> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35970	2013-03-11 21:02:40 +00:00
Gabor Juhos	23b3b3a194	kernel: update linux 3.7 to 3.7.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35860	2013-03-03 13:57:40 +00:00
Gabor Juhos	8798c73860	ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension All known rt305x and rt3883 implementations support at least the 24kec instruction set which includes the DSP extension. For rt288x, the previous value mips32r2 is kept. The cpu target is now set per sub-archtecture, according to cpu-feature-overrides.h of each SoC family. [juhosg: define ARCH_PACKAGES variable for rt305x/rt3883 in order to differentiate the packages compiled with the 24Kec option.] Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35853	2013-03-03 12:47:31 +00:00
Gabor Juhos	59ad675ef1	ramips: add user-space detection for ALL5002/ALL5003 Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35852	2013-03-03 12:47:28 +00:00
Gabor Juhos	50e51e5ecc	ramips: indicate support for ALL5003 add ALL5003 to board description in mach-all5002.c adapt detection in user-space accordingly (no functional changes) Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35851	2013-03-03 12:47:25 +00:00
Gabor Juhos	367ab0a40f	ramips: enhance user-space board detection Similar to ar71xx, detect only once and cache the strings in /tmp/sysinfo/model and /tmp/sysinfo/boardname. Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35850	2013-03-03 12:47:02 +00:00
Gabor Juhos	1ba2272ca5	ramips: fix whitespace in /lib/ramips.sh Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35849	2013-03-03 12:46:08 +00:00
Gabor Juhos	5412b6f32e	ramips: add support for 3.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35801	2013-02-25 21:28:42 +00:00
Gabor Juhos	a08646642e	ramips: image: don't break make process if mkimage command fails Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35800	2013-02-25 21:28:40 +00:00
Gabor Juhos	275db5b4c4	ramips: remove port_power_off field from ehci_platform_data It is removed in 3.8. Also add a revert patch for 3.7. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35799	2013-02-25 21:28:38 +00:00
Gabor Juhos	5e1d6ce077	ramips: remove __dev_{init,exit} annotations Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35798	2013-02-25 21:28:34 +00:00
Jonas Gorski	1cd62d06ca	ramips: print image build warnings/errors to stderr Makes warnings/errors visible when building with V=w/V=1. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35721	2013-02-21 11:45:33 +00:00
Gabor Juhos	90011a99f3	ramips: migrate to common led helper functions [juhosg: migrate to status_led_blink_{preinit,failsafe} helpers] Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35652	2013-02-18 09:56:29 +00:00
Gabor Juhos	3f749d1e8e	kernel: update linux 3.7 to 3.7.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35644	2013-02-17 21:32:42 +00:00
Gabor Juhos	4375dae6d3	ramips: fix kmod-usb2 package name Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35628	2013-02-16 17:26:52 +00:00
Gabor Juhos	7fd8525853	ramips: use the new macaddr_* helpers instead of maccalc Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35615	2013-02-16 11:50:25 +00:00
Gabor Juhos	753d713e92	ramips: use the mtd_get_mac_* helpers Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35613	2013-02-16 11:50:21 +00:00
Gabor Juhos	162b8e23a5	kernel: update linux 3.7 to 3.7.8 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35604	2013-02-15 07:36:15 +00:00
Gabor Juhos	bae4bfe3f8	kernel: update linux 3.7 to 3.7.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35571	2013-02-12 09:51:11 +00:00
Gabor Juhos	08ff976720	kernel: update linux 3.7 to 3.7.6 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35476	2013-02-04 10:02:56 +00:00
Gabor Juhos	9ed81a91f3	ramips: build image for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35468	2013-02-02 17:21:06 +00:00
Gabor Juhos	813aec6796	ramips: add user-space support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35467	2013-02-02 17:21:05 +00:00
Gabor Juhos	d578f3ac38	ramips: rt3883: add kernel support for the Omnima EMB HPM board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35466	2013-02-02 17:21:01 +00:00
Gabor Juhos	b99b2ff553	ramips: add userspace support for the Edimax BR-6425 [juhosg: remove sysupgrade changes] Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35463	2013-02-02 17:01:50 +00:00
Gabor Juhos	0a42e38bad	ramips: add kernel support for the Edimax BR-6425 board Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35462	2013-02-02 17:01:47 +00:00
Gabor Juhos	fb2e2a56d7	refresh kernel configs Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35434	2013-02-01 17:28:40 +00:00
Gabor Juhos	562ba537fc	kernel: update linux 3.7 to 3.7.5 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35390	2013-01-29 18:29:45 +00:00
John Crispin	756a7c5451	fix for non-blinking LAN LEDs https://dev.openwrt.org/ticket/12830 SVN-Revision: 35359	2013-01-28 18:06:31 +00:00
John Crispin	d93706154b	ramips: reset switch on single-port devices Signed-off-by: Daniel Gole <dgolle@allnet.de> SVN-Revision: 35356	2013-01-28 17:44:41 +00:00
Gabor Juhos	15be1c9ee7	kernel: update linux 3.7 to 3.7.4 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35318	2013-01-24 17:08:37 +00:00
Gabor Juhos	ed6d399f8d	ramips: add profile and build image for the Tenda 3G300M Factory image should be used to flash from original firmware. [juhosg: use the GENERIC_4M template] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35246	2013-01-19 17:05:07 +00:00
Gabor Juhos	9891603eb5	ramips: add user-space support for the Tenda 3G300M Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35245	2013-01-19 17:05:06 +00:00
Gabor Juhos	7eff5d2df0	ramips: add kernel support for the Tenda 3G300M Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons and seven leds. Factory image should be used to flash from original firmware. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35244	2013-01-19 17:05:03 +00:00
Gabor Juhos	f7a943694f	ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0 These targets need custom image names specified in the uImage header. MkImage accepts an optional 4th argument to do exactly that. Reuse the facility to generate factory images. Compile-tested, the generated files inspected with "file" utility. [juhosg: - keep the factory.bin images to avoid users confusion, - use GENERIC_4M template for the W306R V2.0 - update commit log] Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35243	2013-01-19 15:36:13 +00:00
Gabor Juhos	6aebe6a65d	ramips: allow to override image name/suffix in GENERIC_{4,8}M macros Sysupgrade/KRuImage and BuildFirmware/Generic macros are changed as well. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35242	2013-01-19 15:36:11 +00:00
Gabor Juhos	60dde219d4	ramips: do not stop the build if some targets fail This becomes crucial when you are using a generic profile to build an image larger than 4M, e.g. for w502u. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35238	2013-01-19 08:51:45 +00:00
Jo-Philipp Wich	3a2cccda2e	all targets: use numerically prefixed uci-defaults file names to better control order of execution SVN-Revision: 35217	2013-01-18 12:42:53 +00:00
Gabor Juhos	0de21d9747	kernel: update linux 3.7 to 3.7.3 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35216	2013-01-18 11:44:42 +00:00
Felix Fietkau	576aa2af0c	ramips: enable BR6425N in kernel config Though originally contained in the patch applied in r35020, the move to 3.7 in r34845 lost the kernel .config option. Reintroduce it to config-3.7. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 35191	2013-01-17 09:39:44 +00:00
Gabor Juhos	ff2ce330a5	ramips: remove 3.6 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35110	2013-01-12 12:25:30 +00:00
Gabor Juhos	d53f8c3ded	ramips: switch to 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35109	2013-01-12 12:25:28 +00:00
John Crispin	f2f9332350	adds support for Edimax BR-6524N fixes #12754 Signed-off-by: <rq@akl.lt> SVN-Revision: 35020	2013-01-06 11:11:42 +00:00
John Crispin	569bbe4970	rt5350 switch support fix RT5350 frame engine need reset frame engine and embedded switch together. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> SVN-Revision: 34969	2013-01-02 11:28:21 +00:00
Gabor Juhos	fb07876f25	ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34934	2012-12-30 08:23:48 +00:00
Gabor Juhos	6708d68c24	ramips: build firmware image for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34927	2012-12-29 17:50:40 +00:00
Gabor Juhos	8b1ac2ae37	ramips: add user-space support for the Planex MZK-W300NH2 Router Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34926	2012-12-29 17:50:38 +00:00
Gabor Juhos	d6d06aceb0	ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925	2012-12-29 17:50:35 +00:00
Gabor Juhos	76537041eb	ramips: build image for Airlive AIR3GII Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34924	2012-12-29 17:50:34 +00:00
Gabor Juhos	3aad9b4c9b	ramips: add user-space support for Airlive AIR3GII Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34923	2012-12-29 17:50:32 +00:00
Gabor Juhos	3fcb8bb0dd	ramips: rt305x: add kernel support for AirLive AIR3GII AirLive AIR3GII is Ralink RT5350F based device with 100Mbps switch, USB port, 4MB flash and 32MB ram. Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade Does not work: wifi (chip RT5350), reset button [ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected. [ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. Other problem: LAN leds is reverse (lights when not cable connected and vice versa) [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/2913/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34922	2012-12-29 17:50:28 +00:00
Felix Fietkau	41a039f464	mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration SVN-Revision: 34909	2012-12-28 19:17:19 +00:00
Gabor Juhos	69da894432	ramips: fix ASUS WL-330N3G MAC address The ASUS WL-330N and WL-330N3G has the MAC address stored at offset 4, not 40. This is verified by reading original ASUS firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and GPL_WL-330N_source.1021/user/rc/common_ex.c. Tested on WL-330N3G, it now gets the same MAC as is printed on the label on the router. Signed-off-by: Jan Kardell <jan.kardell@arkub.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34877	2012-12-24 06:52:41 +00:00
Gabor Juhos	c5a36f13f0	ramips: fix wifi EEPROM extraction on DIR-615-Dx models Patch from #12636. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34876	2012-12-24 06:52:38 +00:00
Gabor Juhos	8105c6badd	ramips: unify eeprom file name for the built-in wireless MAC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34860	2012-12-22 16:09:03 +00:00
Gabor Juhos	c81b4475c9	ramips: rt3883: fix build error The cpuport_cfg field has been renamed to port0_cfg. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34859	2012-12-22 13:50:47 +00:00
Gabor Juhos	b44cdcde8e	ramips: add support for 3.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34845	2012-12-22 12:11:13 +00:00
Gabor Juhos	b81667cb23	ramips: convert to use {e,o}hci-platform driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34843	2012-12-22 12:11:08 +00:00
Gabor Juhos	e1b5eeeaa4	ramips: Add USB support for DAP-1350 platform. It seems to work as intended, but only lightly tested. Patch-by: Bryan Steele <brynet@gmail.com> SIgned-off-by: Gabor Juhos <juhsog@openwrt.org> SVN-Revision: 34811	2012-12-20 19:17:17 +00:00
Mirko Vogt	e34a4e0c7b	Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) SVN-Revision: 34793	2012-12-19 16:07:50 +00:00
Gabor Juhos	44b9898251	kernel: update linux 3.6 to 3.6.11 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34748	2012-12-18 14:41:16 +00:00
Gabor Juhos	fe8efb72ca	ramips: nuke 3.3 support Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34744	2012-12-17 22:28:11 +00:00
Gabor Juhos	2b378d11c8	kernel: update linux 3.6 to 3.6.10 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34639	2012-12-11 20:14:39 +00:00
John Crispin	c2ae0ec02a	add support for Hauppauge Broadway This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway platform. It doesn't deal with the TV tuner or transcoder at this point, but the core functionality is working (Ethernet, wireless, USB, buttons, LEDs, etc). Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> SVN-Revision: 34595	2012-12-10 14:13:01 +00:00
Gabor Juhos	2581173660	kernel: update linux 3.6 to 3.6.9 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34578	2012-12-08 15:01:33 +00:00
Gabor Juhos	e0e43655ce	ramips: fix serial console for Belkin F5D8235 v1/v2 Based on a patch from #12533. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34445	2012-12-02 14:16:12 +00:00
Gabor Juhos	44131bd785	ramips: rt305x: add profile and build image for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34407	2012-11-29 17:37:14 +00:00
Gabor Juhos	d3994b7408	ramips: rt305x: add user-space support for the Asus RT-N13U Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34406	2012-11-29 17:37:13 +00:00
Gabor Juhos	0ec59e6235	ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router The work has been backported from openwrt-dreambox with some modifications & code cleanup. * updated config-3.3 * updated config-3.6 * renamed rt-n13 to rt-n13u * fixed mach-rt-n13u.c [juhosg: move user-space support and image generation into separate patches] Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34405	2012-11-29 17:37:11 +00:00
Gabor Juhos	c2f018fca2	remove common symbols from 3.6 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34404	2012-11-29 15:21:41 +00:00
Gabor Juhos	1f516235ea	remove common symbols from 3.3 configs The removed symbols are present in the generic configuration. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34403	2012-11-29 15:21:35 +00:00
Gabor Juhos	3a4d0ebd5c	kernel: update linux 3.6 to 3.6.8 Also refresh the affected patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34402	2012-11-29 07:42:19 +00:00
Gabor Juhos	57b7879a4e	ramips: ramips_eth: use Kconfig definition to enable debug The Kconfig identifier to enable debugging in the driver was different from the actually used one. Fix that. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34332	2012-11-25 14:25:54 +00:00
Gabor Juhos	21d5df8700	ramips: add DIR-615 D userspace support Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and Makefile changes to build images for this target. However, without the userspace bits a ramips machine can't use wifi as the necessary "eeprom" data is to be extracted by a hotplug script; also, sysupgrade support and default led configuration are missing. An IRC user reported these changes allowed him to use wifi on his hardware. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34331	2012-11-25 14:25:27 +00:00
Gabor Juhos	dd092fd10c	ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 Signed-off-by: Daniel Golle <dgolle@allnet.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34270	2012-11-20 07:19:10 +00:00
Gabor Juhos	ff1e854511	kernel: update linux 3.6 to 3.6.7 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34227	2012-11-18 08:41:31 +00:00
John Crispin	dd8c625424	previous commit pushed 1 file too many ;) SVN-Revision: 34179	2012-11-12 21:36:23 +00:00
John Crispin	ced0cf3a94	move ethernet hw init to init/uninit functions This should fix the stalled irq problem seen by several people. This is not the real fix, but rather moves the bug to the un/init patch of the driver. The real bug still needs to be fixed, but this workaround should be suffcient to make the ethernet stable. SVN-Revision: 34177	2012-11-12 21:35:01 +00:00
John Crispin	6090ddc896	adds fon20n profile SVN-Revision: 34112	2012-11-07 20:26:31 +00:00
John Crispin	3991526989	ramips: use kernel 3.6.6 ## Booting image at 80800000 ... Image Name: MIPS OpenWrt Linux-3.6.6 Created: 2012-11-06 14:19:54 UTC System Control Status = 0x20440000 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 3560768 Bytes = 3.4 MB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ... ## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 0001964c (MIPS 24KEc) [ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x01ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x01ffffff] [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Writing ErrCtl register=0000c388 [ 0.000000] Readback ErrCtl register=0000c388 [ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:48 [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.000000] console [ttyS1] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952) [ 0.090000] pid_max: default: 32768 minimum: 301 [ 0.100000] Mount-cache hash table entries: 512 [ 0.110000] NET: Registered protocol family 16 [ 0.120000] MIPS: machine is Allnet ALL0239-3G [ 0.140000] bio: create slab <bio-0> at 0 [ 0.150000] Switching to clocksource MIPS [ 0.160000] NET: Registered protocol family 2 [ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.210000] TCP: reno registered [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.240000] NET: Registered protocol family 1 [ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.490000] msgmni has been set to 52 [ 5.500000] io scheduler noop registered [ 5.510000] io scheduler deadline registered (default) [ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A [ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A [ 5.560000] physmap platform flash device: 00800000 at bf000000 [ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 [ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040 [ 5.610000] Amd/Fujitsu Extended Query version 1.3. [ 5.620000] number of CFI chips: 1 [ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0 [ 5.640000] Creating 6 MTD partitions on "physmap-flash.0": [ 5.650000] 0x000000000000-0x000000030000 : "u-boot" [ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env" [ 5.680000] 0x000000040000-0x000000050000 : "factory" [ 5.690000] 0x000000050000-0x000000130000 : "kernel" [ 5.700000] 0x000000130000-0x000000800000 : "rootfs" [ 5.710000] mtd: partition "rootfs" set to be root filesystem [ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0" [ 5.740000] 0x000000050000-0x000000800000 : "firmware" [ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33 [ 5.780000] TCP: cubic registered [ 5.780000] NET: Registered protocol family 17 [ 5.790000] 8021q: 802.1Q VLAN Support v1.8 [ 5.820000] Freeing unused kernel memory: 2676k freed [ 6.490000] Button Hotplug driver version 0.4.1 - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - - init - Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993 [ 10.170000] Backport based on wireless-testing.git master-2012-09-07 [ 10.180000] compat.git: wireless-testing.git [ 10.210000] cfg80211: Calling CRDA to update world regulatory domain [ 10.230000] cfg80211: World regulatory domain updated: [ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.430000] NET: Registered protocol family 10 [ 10.760000] PPP generic driver version 2.4.2 [ 10.820000] l2tp_core: L2TP core driver, V2.0 [ 10.840000] l2tp_netlink: L2TP netlink interface [ 10.870000] sit: IPv6 over IPv4 tunneling driver [ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.060000] NET: Registered protocol family 24 [ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max) [ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 14.510000] device eth0.1 entered promiscuous mode [ 14.520000] device eth0 entered promiscuous mode [ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready [ 14.550000] br-lan: port 1(eth0.1) entered forwarding state [ 14.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.560000] br-lan: port 1(eth0.1) entered forwarding state [ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33 BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ \| \|.-----.-----.-----.\| \| \| \|.----.\| \|_ \| - \|\| _ \| -__\| \|\| \| \| \|\| _\|\| _\| \|_______\|\| __\|_____\|__\|__\|\|________\|\|__\| \|____\| \|__\| W I R E L E S S F R E E D O M ----------------------------------------------------- BARRIER BREAKER (Bleeding Edge, r34079) ----------------------------------------------------- * 1/2 oz Galliano Pour all ingredients into * 4 oz cold Coffee an irish coffee mug filled * 1 1/2 oz Dark Rum with crushed ice. Stir. * 2 tsp. Creme de Cacao ----------------------------------------------------- root@OpenWrt:/# SVN-Revision: 34111	2012-11-07 20:26:21 +00:00
John Crispin	480892226d	ramips: add HAVE_CLK to Kconfig on all ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34110	2012-11-07 20:26:04 +00:00
John Crispin	feb31be6af	ramips: add linux-3.6 configuration for ramips socs Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/rt288x/config-3.6 create mode 100644 target/linux/ramips/rt305x/config-3.6 create mode 100644 target/linux/ramips/rt3883/config-3.6 SVN-Revision: 34109	2012-11-07 20:25:55 +00:00
John Crispin	ca1fcaed5b	ramips: port patches to linux-3.6 Signed-off-by: Daniel Golle <dgolle@allnet.de> create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch SVN-Revision: 34108	2012-11-07 20:25:34 +00:00
Gabor Juhos	a0dd47bbed	ramips: enable USB power on the DIR-645 Closes #12422. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34082	2012-11-05 11:04:45 +00:00
Gabor Juhos	829aaedcbf	ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 34078	2012-11-05 06:58:53 +00:00
Gabor Juhos	e91dc2e5b3	target: refresh all target configs with kconfig.pl Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33987	2012-10-29 10:11:05 +00:00
Gabor Juhos	db5eea6acd	ramips: use correct key code for the RFKILL switch on the TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33943	2012-10-26 18:53:44 +00:00
Gabor Juhos	b530d9d2b3	ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33864	2012-10-19 17:42:22 +00:00
Gabor Juhos	6ca2970e4b	ramips: add profile and build image for the TEW-691GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33852	2012-10-18 07:23:13 +00:00
Gabor Juhos	21180e29f7	ramips: add user-space support for TEW-691GR Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33851	2012-10-18 07:23:12 +00:00
Gabor Juhos	25d53c4c28	ramips: rt3883: add initial support for the TRENDnet TEW-691GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33850	2012-10-18 07:23:11 +00:00
Gabor Juhos	462a53c367	ramips: add profile and build image for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33849	2012-10-18 07:23:10 +00:00
Gabor Juhos	d3c368c324	ramips: add user-space support for the TEW-692GR board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33847	2012-10-18 07:23:07 +00:00
Gabor Juhos	7f8b7207c9	ramips: rt3883: add initial support for TRENDnet TEW-692GR board No wireless support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33846	2012-10-18 07:23:06 +00:00
Gabor Juhos	bf9ae9432b	ramips: add profile and build image for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33845	2012-10-18 07:23:04 +00:00
Gabor Juhos	06edafd079	ramips: add user space support for the DIR-645 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844	2012-10-18 07:23:03 +00:00
Gabor Juhos	d1a253a2fd	ramips: rt3883: add inital support for the DIR-645 board Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33843	2012-10-18 07:23:02 +00:00
Gabor Juhos	e962c16a88	ramips: use get_magic_long in sysupgrade image check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842	2012-10-18 07:23:00 +00:00
Gabor Juhos	d832cd11f8	ramips: add image for ALL0256N-8M The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614	2012-10-04 06:34:09 +00:00
Gabor Juhos	e3bcbeb427	ramips: add memory detection code for RT5350 SVN-Revision: 33571	2012-09-27 10:18:15 +00:00
Gabor Juhos	80d2da9f0f	ramips: allow to use custom code for memory size detection SVN-Revision: 33570	2012-09-27 10:18:14 +00:00
John Crispin	d8c04821c3	make uci-defaults switch detection work on rt5350 SVN-Revision: 33549	2012-09-25 14:47:18 +00:00
John Crispin	34d57ebd8b	add ethernet support for rt5350 SVN-Revision: 33548	2012-09-25 14:47:08 +00:00
John Crispin	af0cd76937	make ramips ethernet use a register mapping table SVN-Revision: 33547	2012-09-25 14:46:58 +00:00
John Crispin	394a560a9a	unbreak port mapping detection SVN-Revision: 33536	2012-09-25 09:51:48 +00:00
John Crispin	223db72385	D-Link DAP-1350; Avoid bricking esw config This is a patch to connect eth0.1 (lan) to the only ethernet connector available. D-Link DAP-1350 goes bricked with AA 12.09-beta. This is because the current esw configuration for the board connects eth0.2 (wan) to the ONE and ONLY ethernet connector available, preventing initial access to the board through 192.168.1.1 on eth0.1 after flashing, effectively bricking the board. There are things that should be done to make this board really useful, but for AA 12.09, this one liner is indispensable. Signed of by Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33411	2012-09-15 09:28:28 +00:00
John Crispin	bf355f8ee9	ramips/rt3883: fix a typo in the ASUS profile Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33410	2012-09-15 09:20:50 +00:00
Gabor Juhos	0a42b02126	ramips/rt305x: add initial support for Rt5350 SoC Somehow detecting the RAM size in common/setup.c doesn't work here, it always detects 64M and then crashes on devices with less RAM. Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how it could be, for now I use the mem=32M kernel parameter to get stuff working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33381	2012-09-12 19:03:12 +00:00
Gabor Juhos	d8b2fef763	ramips: Add missing andmask to ramips_esw register read for recv_good value. Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33322	2012-09-05 20:08:43 +00:00
Gabor Juhos	04c6143ca9	ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33321	2012-09-05 20:08:42 +00:00
Gabor Juhos	6c7b776ae0	ramips: add rssileds to package set in profile for devices which got them. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33316	2012-09-05 19:22:48 +00:00
Gabor Juhos	b0da5b73b8	ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002 SVN-Revision: 33307	2012-08-29 10:37:51 +00:00
Gabor Juhos	54d8a55eed	ramips: make built-in switch transparent for ALL0256N and ALL5002 This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33305	2012-08-29 10:37:47 +00:00
Gabor Juhos	bc4763a399	ramips: Power down phy on disabled switch ports Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33304	2012-08-29 10:37:45 +00:00
Gabor Juhos	1617f226a9	ramips: Add support for 8devices Carambola dev board. Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303	2012-08-29 10:37:43 +00:00
Gabor Juhos	bb0785880a	ramips: Rename POC registers Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33302	2012-08-29 10:37:41 +00:00
Gabor Juhos	f1b9d77912	ramips: Minor ramips_esw.c cleanup Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33301	2012-08-29 10:37:40 +00:00
Gabor Juhos	1f3400d3b4	ramips: Add switch setup to uci network defaults Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33300	2012-08-29 10:37:38 +00:00
Gabor Juhos	3b17f1deb8	ramips: Add swconfig support to ramips_esw.c Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33299	2012-08-29 10:37:36 +00:00
Gabor Juhos	358c7e47f2	ramips: ramips_esw.c indentation cleanup Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33298	2012-08-29 10:37:35 +00:00
Gabor Juhos	cebaa557be	ramips: fix board parameter for the NBG-419N (#12061 ) SVN-Revision: 33229	2012-08-22 17:55:12 +00:00
Gabor Juhos	eb54a05e89	ramips: add profile for Allnet devices Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33225	2012-08-22 12:36:35 +00:00
Gabor Juhos	d77418d67e	ramips: add RSSI leds for uci-defaults for ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33220	2012-08-22 09:46:30 +00:00
Gabor Juhos	67e6461ad7	ramips: add board alias for the ALL0239-3G Generate image for the ALL0239-3G which can be flashed through the chipset-vendor SDK based firmware's web-interface and bootloader. The bootloader seems to ignore uImage checksum errors, but does complain about them once the 0xDEADC0DE was replaced by an actual JFFS2 page. I'm working on implementing fixtrx for uImage in the mtd package to solve this. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33206	2012-08-17 17:56:07 +00:00
Gabor Juhos	89606b61b1	ramips: add support for D-Link DIR-615 H1 rt2x00 still needs some patching as the radio doesn't come to life. Installation via webflash. [juhosg: fix whitespace issues, remove rt305x_register_usb from machine setup because the board has no USB port] Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi> SVN-Revision: 33205	2012-08-17 17:56:05 +00:00
Gabor Juhos	82759a1716	ramips: rename rt3352 usb platform devices In order to get OHCI/EHCI working on the Rt3352, the platform device must be named so rt3883-?hci will recognize it. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33145	2012-08-12 12:48:31 +00:00
Gabor Juhos	1525620b0e	ramips: watchdog: use maximum possible timeout by default As the userspace has no means to determine the maximum possible timeout, use that as the default and let the userspace lower it when necessary. As the result the usual OpenWrt install (with busybox's watchdog trying to set the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at 384MHz instead of the current 20s default. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33144	2012-08-12 12:48:28 +00:00
Gabor Juhos	615a619bc7	ramips: provide means to specify custom "image name" for uImages, use for DIR-620 D-Link's DIR-620 allows to flash a uImage directly from its web-interface but for that the image name should be set to DIR_620. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33143	2012-08-12 12:48:26 +00:00
Gabor Juhos	9365113040	ramips: add D-Link DIR-620 A1 support Full functionality runtime tested, installation via OEM web-interface requires a follow-up patch. Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing bits (including the antiparallel wps led). Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 33142	2012-08-12 12:48:24 +00:00
Florian Fainelli	1627b2bb4b	move rt305x-dwc driver to target specific modules.mk SVN-Revision: 32864	2012-07-25 15:50:42 +00:00
John Crispin	5e52619b76	DWC otg usb: compilation fixes and trivial bugfix in slave mode Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru> SVN-Revision: 32823	2012-07-24 20:38:55 +00:00
John Crispin	799d6deab0	D-Link DAP-1350 initial support The initial support for the D-Link DAP-1350. USB related functionality is not tested. Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 32821	2012-07-24 20:38:43 +00:00
John Crispin	03be8d08ac	initial LED configuration for Fonera 2.0n Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> SVN-Revision: 32819	2012-07-24 20:38:31 +00:00
John Crispin	2d2479a033	add ALL5002 userspace support detect EEPROM, MAC addresses and support sysupgrade for the ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32816	2012-07-24 20:38:14 +00:00
John Crispin	e219c3ac3a	enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. Hope that this works, didn't have a chance to actually test it... Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32815	2012-07-24 20:38:08 +00:00
John Crispin	a65eee9ac3	add image build for ALL5002 add image build for ALL5002 Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32814	2012-07-24 20:38:03 +00:00
John Crispin	0a08a776fb	add support for Allnet ALL5002 to kernel support ALL5002 in ramips/rt305x branch of the kernel. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32813	2012-07-24 20:37:56 +00:00
John Crispin	6641024f50	uart_clk on Rt3352F is always 40MHz Currently, sys_clk/10 is used which is just wrong. cpu_clk/10 would work for systems with 400MHz CPU clock. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 32812	2012-07-24 20:37:50 +00:00
Gabor Juhos	372945185d	ramips: rt305x: add support for Edimax 3G-6200N Support for Edimax 3G-6200N router with USB. Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com> SVN-Revision: 32682	2012-07-12 13:29:46 +00:00
Vasilis Tsiligiannis	eee358338c	ramips: mac address detection for Fonera 2.0n Detect and apply MAC address of a Fonera 2.0n (ramips) Signed-off-by: Malte Forkel <malte.forkel@berlin.de> Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr> SVN-Revision: 32490	2012-06-23 13:58:29 +00:00
Gabor Juhos	833b4af816	ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router. The platform is based on Ralink RT3052. http://wiki.openwrt.org/toh/petatel/psr-680w Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru> SVN-Revision: 32450	2012-06-19 09:52:15 +00:00
John Crispin	a4d96aae8d	bump to 3.3.8 SVN-Revision: 32055	2012-06-05 06:57:51 +00:00
Gabor Juhos	ffbb4f88a9	ramips: use the generic uci-default functions for initial LED setup SVN-Revision: 31993	2012-05-29 16:39:18 +00:00
Gabor Juhos	c71838faa1	ramips: WAN LED for D-Link DIR-300-B1 Add led devices for D-Link DIR-300-B1 WAN LED. Note that the GPIO state is also ANDed with the esw switch port 4 LED state, which is why I've set the amber LED to default-on. Closes: https://dev.openwrt.org/ticket/11326 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> [ juhosg: - fix comment style in mach-dir-300-revb.c, - remove the PPP specific LED setup, not everyone uses a PPP connection on the WAN interface] SVN-Revision: 31989	2012-05-29 16:39:03 +00:00
Gabor Juhos	1c552ba8e5	ramips: rt3883: add device registration code for the SPI controller SVN-Revision: 31922	2012-05-27 17:10:00 +00:00
Gabor Juhos	9c241983fc	ramips: allow to use the SPI driver on RT3662/RT3883 SVN-Revision: 31921	2012-05-27 17:09:58 +00:00
Gabor Juhos	78a750dcce	ramips: rt3883: fix GPIO reservation for the SPI pins SVN-Revision: 31920	2012-05-27 17:09:56 +00:00
Gabor Juhos	0622fdd82c	ramips: rt305x: remove superfluous controller_data assignment SVN-Revision: 31919	2012-05-27 17:09:52 +00:00
Gabor Juhos	7f5bec0642	ramips: make rt2x00 firmware extraction quiet SVN-Revision: 31918	2012-05-27 17:09:50 +00:00
Gabor Juhos	2ae5581447	kernel: update linux 3.3 to 3.3.7 SVN-Revision: 31848	2012-05-23 21:05:32 +00:00
Gabor Juhos	e4720dfa95	ramips: Add byte queue limits support to net/ethernet/ramips_main.c Add byte queue limits support to net/ethernet/ramips_main.c "Byte queue limits are a mechanism to limit the size of the transmit hardware queue on a NIC by number of bytes. The goal of these byte limits is too reduce latency (HOL blocking) caused by excessive queuing in hardware (aka buffer bloat) without sacrificing throughput." Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31844	2012-05-23 21:05:23 +00:00
Gabor Juhos	1d286fd755	ramips: Enable sysupgrade for Sitecom WL-351 Sysupgrade works just fine on my Sitecom WL-351 after adding this oneliner. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31843	2012-05-23 21:05:22 +00:00
Gabor Juhos	39994008cb	linux: move certain disabled symbols to the generic configs * CONFIG_ARCH_DMA_ADDR_T_64BIT * CONFIG_ARCH_HAS_ILOG2_U32 * CONFIG_ARCH_HAS_ILOG2_U64 * CONFIG_ARCH_PHYS_ADDR_T_64BIT * CONFIG_ARCH_SUPPORTS_MSI * CONFIG_GENERIC_CPU_DEVICES * CONFIG_HWMON_DEBUG_CHIP * CONFIG_I2C_PXA_PCI * CONFIG_LEDS_GPIO * CONFIG_MINIX_FS_NATIVE_ENDIAN * CONFIG_MLX4_CORE * CONFIG_POWER_SUPPLY * CONFIG_POWER_SUPPLY_DEBUG * CONFIG_QUOTACTL * CONFIG_SDIO_UART * CONFIG_SENSORS_K10TEMP * CONFIG_SENSORS_SCH56XX_COMMON * CONFIG_SENSORS_VIA_CPUTEMP * CONFIG_SERIO_AMBAKMI * CONFIG_SERIO_I8042 * CONFIG_SERIO_LIBPS2 * CONFIG_SERIO_PCIPS2 * CONFIG_SERIO_RAW * CONFIG_SERIO_SERPORT * CONFIG_SPI_BITBANG * CONFIG_SPI_GPIO SVN-Revision: 31737	2012-05-15 10:58:52 +00:00
Gabor Juhos	b472e5d12e	kernel: update linux 3.3 to 3.3.6 SVN-Revision: 31709	2012-05-14 09:18:32 +00:00
Gabor Juhos	34018a630f	kernel: update linux 3.3 to 3.3.5 SVN-Revision: 31645	2012-05-07 20:11:43 +00:00
Gabor Juhos	b0449ccf04	ramips: W306R V2.0 - GPIO and Network fixes Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> SVN-Revision: 31557	2012-05-02 19:17:59 +00:00
Gabor Juhos	90e99b9fe8	ramips: Make serial console for DIR-300-B1 work again Make serial console for DIR-300-B1 work again. With some recent change, "console=ttyS1,57600" was removed from the default kernel command line, this adds the necessary mkcmdline incantation to image/Makefile to add it there for this target. This is quite likely broken for other targets as well. Without this the console switches to ttyS0 instead of ttyS1 and kernel output is missing, and the userspace comes up with 9600 baud instead of 57600. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 31556	2012-05-02 19:17:58 +00:00
Gabor Juhos	cbfce53831	kernel: update linux 3.3 to 3.3.4 SVN-Revision: 31541	2012-04-30 08:38:11 +00:00
Gabor Juhos	8e06682fb7	ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31507	2012-04-29 07:36:33 +00:00
Jonas Gorski	8fd383ae2e	kernel: update linux 3.3 to 3.3.3 SVN-Revision: 31460	2012-04-24 09:25:38 +00:00
Gabor Juhos	1ab80c7817	ramips: rt305x: add support for the UR-336UN board Patch-by: Lebedev Dmitry <lebedev@trendnet.ru> SVN-Revision: 31451	2012-04-23 16:56:06 +00:00
Gabor Juhos	3626444c6d	ramips: rt305x: add support for the Asus WL-330N3G board This patch adds support for the ASUS WL-330N3G Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led. The bi-color led is driven by 2 gpio. I don't know how to handle this, so I simply made 2 leds : one red, one blue. But the red light takes precedence over the blue one according to the chart below. r = led is red b = led is blue 0 = led is off xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness initial state action led gpio state r0 b0 r0->r1 r r0 b0 r0 b0 b0->b1 b r0 b1 r1 b0 r1->r0 0 r0 b0 r1 b0 b0->b1 r r1 b1 r1 b1 r1->r0 b r0 b1 r1 b1 b1->b0 r r1 b0 r0 b1 r0->r1 r r1 b1 r0 b1 b1->b0 0 r0 r0 Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31450	2012-04-23 16:56:05 +00:00
Gabor Juhos	5024ffb976	ramips: nuke 3.2 suport SVN-Revision: 31405	2012-04-21 12:30:53 +00:00
Gabor Juhos	6c8ca78067	ramips: switch to 3.3.2 SVN-Revision: 31404	2012-04-21 12:30:51 +00:00
Gabor Juhos	5c325b0057	ramips: add support for 3.3 SVN-Revision: 31403	2012-04-21 12:30:50 +00:00
Gabor Juhos	7f902c962b	ramips: rt305x: add OHCI/EHCI registration code for RT3352 SVN-Revision: 31402	2012-04-21 12:30:48 +00:00
Gabor Juhos	1645928135	ramips: rt305x: fix CPU clock detection on RT3352 SVN-Revision: 31401	2012-04-21 12:30:47 +00:00
Gabor Juhos	fb69e28eaf	ramips: rt305x: use different memory size setup for RT3352 SVN-Revision: 31400	2012-04-21 12:30:45 +00:00
Gabor Juhos	818aeba960	ramips: rt3883: add profile and build sysupgrade image for the RT-N56U SVN-Revision: 31399	2012-04-21 12:30:44 +00:00
Gabor Juhos	6b677e1d22	ramips: add swconfig to the default package list SVN-Revision: 31398	2012-04-21 12:30:43 +00:00
Gabor Juhos	ced031a0b2	ramips: build initramfs image for the Fonera 2.0N SVN-Revision: 31397	2012-04-21 12:30:42 +00:00
Gabor Juhos	fc88a363c0	ramips: rt305x: add initial support for Tenda W306R V2.0 More device info at: http://wiki.openwrt.org/toh/tenda/w306r Signed-off-by: David Pearce <David_18051985@hotmail.com.au> [juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages from the profile, change broken GPIO number] SVN-Revision: 31396	2012-04-21 12:30:40 +00:00
Gabor Juhos	88b5827c52	ramips: remove hardcoded console parameter from kernel configs SVN-Revision: 31395	2012-04-21 12:30:30 +00:00
Jonas Gorski	a8f2bc682e	kernel: also update the targets to use 3.2.15 Thanks Gabor for spotting it. SVN-Revision: 31337	2012-04-17 13:12:14 +00:00
Jonas Gorski	16b4cbcdd6	kernel: update linux 3.2 to 3.2.14 SVN-Revision: 31222	2012-04-09 14:48:51 +00:00
Jonas Gorski	d87efd8c3c	kernel: update linux 3.2 to 3.2.13 and refresh patches Also remove a duplicate patch from lantiq (already in generic). SVN-Revision: 31158	2012-04-01 07:56:55 +00:00
Jo-Philipp Wich	e9c4d3d1f2	ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation SVN-Revision: 31144	2012-03-29 16:03:04 +00:00
Gabor Juhos	d495277d9f	ramips: rt305x: build image for the DIR-615 rev D boards Patch from #10105. SVN-Revision: 31101	2012-03-27 19:29:59 +00:00
Gabor Juhos	e4e24c5512	ramips: rt305x: add add support for the Asus WL-330N board [juhosg: reorder several lines in order to keep things sorted alphabetically] Signed-off-by: Frédéric Leroy <fredo@starox.org> SVN-Revision: 31100	2012-03-27 19:29:57 +00:00
Gabor Juhos	c1dc6df8bd	kernel: update linux 3.2 to 3.2.12 SVN-Revision: 31028	2012-03-19 18:23:31 +00:00
Gabor Juhos	18f7081e17	ramips: rt305x: add profile for the AZtech HW-5503G board Patch from #11085. SVN-Revision: 30907	2012-03-12 17:29:06 +00:00
Gabor Juhos	0f77d0b2ba	ramips: add RT3350 detection SVN-Revision: 30900	2012-03-12 16:12:13 +00:00
Gabor Juhos	05d3f559f5	ramips: rt305x: rewrite SoC detection SVN-Revision: 30890	2012-03-11 19:05:59 +00:00
Gabor Juhos	8cf8ee8f9d	ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_* SVN-Revision: 30889	2012-03-11 19:05:57 +00:00
Gabor Juhos	acb4ad86e5	ramips: replace RALINK_SOC_* macros with global variables SVN-Revision: 30888	2012-03-11 19:05:56 +00:00
Gabor Juhos	8cff770eb3	ramips: introduce ramips_soc_prom_init and move SoC detection into that SVN-Revision: 30887	2012-03-11 19:05:53 +00:00
Gabor Juhos	6c51c47962	ramips: build initramfs image for DIR-{3,6}00 boards SVN-Revision: 30882	2012-03-11 16:39:31 +00:00
Gabor Juhos	4e15457e0e	ramips: allow to use DSP ASE on RT3xxx SVN-Revision: 30879	2012-03-11 16:39:26 +00:00
Gabor Juhos	0e486d2fd2	ramips: add support for unbranded XDX-RN502J board This patch adds support for routers using a PCB marked XDX-RN502J V2.0, such as some unbranded routers like this: http://www.mediafire.com/?8acv87h6snn9fj6 http://www.mediafire.com/?do7xonw7scor4kn http://www.mediafire.com/?1ad49zvx3e7jyix http://www.mediafire.com/?i46cqiq66maa197 http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html some reports also state the Aceex 22Y uses the same board. more information can be found in the following openwrt forum post https://forum.openwrt.org/viewtopic.php?id=34878 [juhosg: fix checkpatch warnings, use the GENERIC_4M template] Signed-off-by: bruno schwander <bruno@tinkerbox.org> SVN-Revision: 30809	2012-03-04 16:09:13 +00:00
Gabor Juhos	44c8b396f9	ramips: board support for Asus RT-N10+ [juhosg: fix indentation in platform scripts, and remove debug messages from 06_set_iface_mac] Signed-off-by: Patrick van Staveren <trick@vanstaveren.us> SVN-Revision: 30808	2012-03-04 16:09:11 +00:00
Gabor Juhos	9698a499b6	kernel: update linux 3.2 to 3.2.9 SVN-Revision: 30767	2012-03-01 19:49:02 +00:00
Gabor Juhos	72599f0c61	ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop SVN-Revision: 30733	2012-02-26 10:54:13 +00:00
Gabor Juhos	100f76a010	ramips: raeth: add rx_info structure This helps to reduce code size on RX path: add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12) function old new delta ramips_eth_open 1104 1144 +40 ramips_ring_free 212 232 +20 ramips_eth_stop 400 408 +8 ramips_eth_rx_hw 648 592 -56 SVN-Revision: 30732	2012-02-26 10:54:12 +00:00
Gabor Juhos	32e7b1c7d9	ramips: raeth: add tx_info structure This helps to reduce code size on TX path: add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36) function old new delta ramips_eth_open 1048 1104 +56 ramips_eth_tx_housekeeping 156 148 -8 ramips_ring_free 224 212 -12 ramips_eth_stop 420 400 -20 ramips_eth_hard_start_xmit 480 428 -52 SVN-Revision: 30731	2012-02-26 10:54:10 +00:00
Gabor Juhos	30143b715c	ramips: raeth: don't process disabled interrupts Also rename the 'fe_int' variable. SVN-Revision: 30713	2012-02-25 11:59:19 +00:00
Gabor Juhos	6990f66861	ramips: fix FONERA20N image generation SVN-Revision: 30710	2012-02-24 16:18:46 +00:00
Gabor Juhos	9afeeae65e	ramips: image: increase minimum kernel partition size to 896k SVN-Revision: 30706	2012-02-23 19:58:16 +00:00
Gabor Juhos	7089b5213e	ramips: image: cleanup and sort templates/profiles SVN-Revision: 30705	2012-02-23 19:58:15 +00:00
Gabor Juhos	c8718a220b	ramips: image: use GENERIC_4M template for the ALL0256N board SVN-Revision: 30704	2012-02-23 19:58:14 +00:00
Gabor Juhos	507c7d30f5	ramips: image: introduce mkmtd/{,phys,spi} helpers SVN-Revision: 30703	2012-02-23 19:58:12 +00:00
Gabor Juhos	5f63ea18aa	ramips: image: pass mtdlayout variables by value SVN-Revision: 30702	2012-02-23 19:58:11 +00:00
Gabor Juhos	49e53c06b9	ramips: image: merge F5D8235V{1,2} templates SVN-Revision: 30701	2012-02-23 19:58:10 +00:00
Gabor Juhos	00e7277a4c	ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards SVN-Revision: 30700	2012-02-23 19:58:07 +00:00
Gabor Juhos	554010d55b	ramips: image: introduce mkcmdline helper SVN-Revision: 30699	2012-02-23 19:58:06 +00:00
Gabor Juhos	32c6d63acf	ramips: image: use the GENERIC_4M template for the V11ST-FE board SVN-Revision: 30698	2012-02-23 19:58:04 +00:00
Gabor Juhos	ab65053cf0	ramips: image: simplify Makefile a bit SVN-Revision: 30697	2012-02-23 19:58:03 +00:00
Gabor Juhos	9017fce3a2	ramips: image: add MkImageLzma wrapper SVN-Revision: 30696	2012-02-23 19:58:02 +00:00
Gabor Juhos	c9d8f471fc	ramips: image: allow to build board specific initramfs images SVN-Revision: 30695	2012-02-23 19:58:01 +00:00
Gabor Juhos	c0974b46a5	ramips: merge identical switch configuration entries SVN-Revision: 30688	2012-02-22 19:46:19 +00:00
Gabor Juhos	a9101a144c	ramips: use unified switch identifiers in uci-defaults/network SVN-Revision: 30687	2012-02-22 19:46:17 +00:00
Gabor Juhos	b6522f372f	ramips: fix VLAN config of the RT-N15 SVN-Revision: 30686	2012-02-22 19:46:15 +00:00
Gabor Juhos	a18a821733	ramips: raeth: show interrupt statistics in debugfs SVN-Revision: 30681	2012-02-22 13:06:44 +00:00
Gabor Juhos	214216c04d	ramips: raeth: add debugfs support SVN-Revision: 30680	2012-02-22 13:06:42 +00:00
Gabor Juhos	c1e4d709fa	ramips: raeth: rename main source file SVN-Revision: 30679	2012-02-22 13:06:41 +00:00
Gabor Juhos	5e6bc97d0c	ramips: raeth: add missing Kconfig and Makefile SVN-Revision: 30671	2012-02-21 09:44:30 +00:00
Gabor Juhos	3ba0f4e1ca	ramips: move the ethernet driver into a separate directory Also clean up the Kconfig symbols. SVN-Revision: 30670	2012-02-21 09:26:43 +00:00
Gabor Juhos	a6d904b1d6	ramips: rename the spi driver SVN-Revision: 30669	2012-02-21 09:26:41 +00:00
Gabor Juhos	dd001a4b0f	ramips: rt3883: make rt3883_nand_data visible SVN-Revision: 30655	2012-02-19 19:40:37 +00:00
Gabor Juhos	62f213eab9	ramips: merge 3.2 fixes SVN-Revision: 30652	2012-02-19 17:52:23 +00:00
Gabor Juhos	18fdaee00b	ramips: nuke 2.6.39 support SVN-Revision: 30651	2012-02-19 17:52:20 +00:00
Gabor Juhos	e2ea72515f	ramips: rt305x: nuke built-in MTD partition maps SVN-Revision: 30650	2012-02-19 17:52:15 +00:00
Gabor Juhos	de6405c898	ramips: rt288x: nuke built-in MTD partition maps SVN-Revision: 30649	2012-02-19 17:52:11 +00:00
Gabor Juhos	e7f59b9326	ramips: build sysupgrade image for the V11ST-FE board SVN-Revision: 30648	2012-02-19 17:52:08 +00:00
Gabor Juhos	3489515a7e	ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router [juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> SVN-Revision: 30645	2012-02-19 16:44:49 +00:00
Gabor Juhos	990ed96a2a	ralink: rt3883: disable the 2GHz band on the RT-N56U SVN-Revision: 30632	2012-02-18 17:36:21 +00:00
Gabor Juhos	5710530c41	ramips: rt3883: make rt3883_wlan_data visible SVN-Revision: 30631	2012-02-18 17:36:16 +00:00
Gabor Juhos	e17a3ffbbd	ramips: extract eeprom for the built-in wlan module on the RT-N56U SVN-Revision: 30604	2012-02-16 20:06:22 +00:00
Gabor Juhos	dabca24361	ramips: rt3883: change eeprom file name SVN-Revision: 30603	2012-02-16 20:06:21 +00:00
Gabor Juhos	00d963999d	ramips: select HW_HAS_PCI on per-board basis SVN-Revision: 30576	2012-02-16 08:17:54 +00:00
Gabor Juhos	fc967295ec	ramips: rt3883: remove a stray character from rt3883.h SVN-Revision: 30575	2012-02-16 08:17:53 +00:00
Gabor Juhos	b4af07d5c0	ramips: rt288x: don't register the PCI controller on each board SVN-Revision: 30574	2012-02-16 08:17:52 +00:00
Gabor Juhos	f8a56dc8df	ramips: raeth: separate ring allocation and setup SVN-Revision: 30573	2012-02-16 08:17:50 +00:00
Gabor Juhos	49fc54be3d	ramips: rt288x: fix PCI resource conflict SVN-Revision: 30563	2012-02-15 21:19:02 +00:00
Florian Fainelli	37f8c19028	correct PCI IO/Mem resource swapping SVN-Revision: 30562	2012-02-15 21:13:21 +00:00
Florian Fainelli	3ceebbba14	add Ralink V11ST-FE board support This board is equipped with: - 4MB of NOR Flash - 32MB of SDRAM - IC+ IP175C switch - one Mini-PCI slot SVN-Revision: 30561	2012-02-15 21:13:11 +00:00
Gabor Juhos	8b8d9a8336	ramips: raeth: add a helper function for skb allocation SVN-Revision: 30555	2012-02-15 18:33:42 +00:00
Gabor Juhos	e57546de83	ramips: raeth: use netdev_alloc_skb SVN-Revision: 30554	2012-02-15 18:33:41 +00:00
Gabor Juhos	064855314b	ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures This helps GCC to generare more efficient code. SVN-Revision: 30553	2012-02-15 18:33:40 +00:00
Gabor Juhos	8c95385d78	ramips: raeth: use 're' instead of 'priv' everywhere SVN-Revision: 30552	2012-02-15 18:33:38 +00:00
Gabor Juhos	b3b79365f3	ramips: raeth: force link down in ramips_phy_stop SVN-Revision: 30550	2012-02-15 13:47:52 +00:00
Gabor Juhos	3e7b461431	ramips: raeth: serialize ramips_link_adjust calls SVN-Revision: 30549	2012-02-15 13:47:50 +00:00
Gabor Juhos	dcb13d4098	ramips: raeth: add PHYLIB support SVN-Revision: 30547	2012-02-15 06:47:12 +00:00
Gabor Juhos	02a01a16c7	ramips: extract eeprom for the PCIe wlan module on the RT-N56U SVN-Revision: 30529	2012-02-14 17:32:45 +00:00
Gabor Juhos	43d1a2c3ab	ramips: rt3883: enable PCI on the RT-N56U board SVN-Revision: 30528	2012-02-14 17:32:44 +00:00
Gabor Juhos	784be92e39	ramips: rt3883: add PCI support SVN-Revision: 30527	2012-02-14 17:32:42 +00:00
Gabor Juhos	10f00dc48b	ramips: rt3883: sync 2.6.39 config SVN-Revision: 30526	2012-02-14 17:32:41 +00:00
Gabor Juhos	ed79921fe5	ramips: use SoC specific irq.h SVN-Revision: 30525	2012-02-14 17:32:40 +00:00
Gabor Juhos	8d5dfa75e6	ramips: rt3883: update package list in the default profile SVN-Revision: 30499	2012-02-13 15:18:05 +00:00
Gabor Juhos	99c019fb0d	ramips: add preliminary support for the Asus RT-N56U board SVN-Revision: 30498	2012-02-13 15:18:04 +00:00
Gabor Juhos	97e641a0e6	ramips: raeth: enable MDIO code for RT3883 SVN-Revision: 30497	2012-02-13 15:18:03 +00:00
Gabor Juhos	e532fa5fd4	ramips: add preliminary support for the RT3662/RT3883 SoCs SVN-Revision: 30495	2012-02-13 15:17:59 +00:00
Gabor Juhos	22ec8b4839	ramips: use GENERIC_{4,8}M image template for WR5123GN SVN-Revision: 30483	2012-02-12 18:04:47 +00:00
Gabor Juhos	b7f129e19b	ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline SVN-Revision: 30482	2012-02-12 18:04:46 +00:00
Gabor Juhos	a287c60a61	ramips: add initial support for 3.2 SVN-Revision: 30476	2012-02-12 12:52:14 +00:00
Gabor Juhos	388013b0ce	ramips: include 'linux/module.h' in the ramips_spi driver SVN-Revision: 30475	2012-02-12 12:52:13 +00:00
Gabor Juhos	faae4235c4	ramips: rt288x: remove per-board physmap_flash_data instances SVN-Revision: 30474	2012-02-12 12:52:12 +00:00
Gabor Juhos	3502e2b93f	ramips: rt305x: remove per-board physmap_flash_data instances SVN-Revision: 30473	2012-02-12 12:52:10 +00:00
Gabor Juhos	3a11dcdaa8	ramips: load gpio-polled keys module SVN-Revision: 30463	2012-02-11 20:37:34 +00:00
Gabor Juhos	323ece9474	ramips: remove yet another CONFIG_MTD_PARTITION ifdef SVN-Revision: 30462	2012-02-11 19:37:11 +00:00
Gabor Juhos	32b9e8c750	ramips: use gpio-keys-polled instead of gpio-buttons SVN-Revision: 30461	2012-02-11 19:37:06 +00:00
Gabor Juhos	80b40497de	ramips: add MIPS platform file SVN-Revision: 30459	2012-02-11 18:16:11 +00:00
Gabor Juhos	4e1b870f3e	ramips: add MDIO bus support for RT288X SVN-Revision: 30455	2012-02-11 16:49:56 +00:00
Gabor Juhos	34a9ccf544	ramips: fix Belkin F5D8235-v2 VLAN setup Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 30452	2012-02-11 15:31:18 +00:00
Gabor Juhos	8916c02b47	ramips: raeth: make debugging messages configurable SVN-Revision: 30450	2012-02-11 15:12:10 +00:00
Gabor Juhos	aac3ad4c0e	ramips: raeth: use device pointer in DMA API calls SVN-Revision: 30449	2012-02-11 15:12:08 +00:00
Gabor Juhos	1fd8724e94	ramips: raeth: add netdev pointer to private structure SVN-Revision: 30448	2012-02-11 15:12:06 +00:00
Gabor Juhos	c6fa11d00f	ramips: raeth: cleanup DMA API usage in ramips_eth_hard_start_xmit SVN-Revision: 30447	2012-02-11 15:12:05 +00:00
Gabor Juhos	2d055f130e	ramips: raeth: unmap rx DMA address in ramips_cleanup_dma SVN-Revision: 30446	2012-02-11 15:12:04 +00:00
Gabor Juhos	7bd7ddcf4e	ramips: raeth: add rx_dma array to store the DMA address of the rx packets SVN-Revision: 30445	2012-02-11 15:12:02 +00:00
Gabor Juhos	647af823d9	ramips: raeth: use dma_addr_t for the descriptors SVN-Revision: 30444	2012-02-11 15:12:01 +00:00
Gabor Juhos	df5892d1f1	ramips: raeth: unmap DMA memory when a packet is received SVN-Revision: 30443	2012-02-11 15:11:56 +00:00
Gabor Juhos	617954ca5d	ramips: raeth: add a temporary pktlen variable SVN-Revision: 30442	2012-02-11 15:11:55 +00:00
Gabor Juhos	d1d492eaf9	ramips: raeth: protect macro parameters SVN-Revision: 30441	2012-02-11 15:11:50 +00:00
Gabor Juhos	8250692359	ramips: raeth: indicate dropped packets in stats SVN-Revision: 30440	2012-02-11 15:11:49 +00:00
Gabor Juhos	c67adbbddb	ramips: raeth: use the NUM_TX_DESC for the tx_skb array SVN-Revision: 30439	2012-02-11 15:11:47 +00:00
Gabor Juhos	a2c8789578	ramips: use uncached address in detect_mem_size SVN-Revision: 30438	2012-02-11 15:11:45 +00:00
Gabor Juhos	ba4c9b3a8f	ramips: rt305x: remove CONFIG_MTD_PARTITION ifdefery from machine files SVN-Revision: 30437	2012-02-11 15:11:43 +00:00
Gabor Juhos	f2dd67dc09	ramips: rt288x: remove CONFIG_MTD_PARTITION ifdefery from machine files SVN-Revision: 30436	2012-02-11 15:11:41 +00:00
Gabor Juhos	d6b9f88743	ramips: refresh patches SVN-Revision: 30435	2012-02-11 15:11:40 +00:00
Gabor Juhos	9cde29f1a7	ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 30434	2012-02-11 15:11:36 +00:00
Gabor Juhos	59b474732c	ramips: rt305x: merge duplicated mac address setup Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 30433	2012-02-11 15:11:34 +00:00
Gabor Juhos	7298ef2456	ramips: rt305x: add profile for the Belkin f5d8235v2 Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 30432	2012-02-11 15:11:32 +00:00
Gabor Juhos	0430194cc3	ramips: fix compiler warning in prom.c SVN-Revision: 30424	2012-02-10 17:38:46 +00:00
Gabor Juhos	44ed690cb3	ramips: change vlan_config for the ALFA W502U board This change moves the WAN port into a separate VLAN. SVN-Revision: 29969	2012-01-31 18:34:10 +00:00
Gabor Juhos	b3fdd931d1	ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910	2012-01-26 10:44:23 +00:00
Gabor Juhos	02e77c6ae1	ramips: generate sysupgrade image for the ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29884	2012-01-24 11:48:48 +00:00
Gabor Juhos	944c8aacdb	ramips: add user-space support for ALL0256N This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883	2012-01-24 11:48:47 +00:00
Gabor Juhos	1932a7205c	ramips: add kernel support for ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29882	2012-01-24 11:48:45 +00:00
Gabor Juhos	9cf1d4e06e	ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871	2012-01-23 10:23:32 +00:00
Gabor Juhos	809fe38e41	ramips fix f5d8235-v1 diag LED support SVN-Revision: 29857	2012-01-22 18:11:39 +00:00
Gabor Juhos	e9d8deaaed	ramips: add sysled and sysupgrade to wr512-3gn Patch from #10035. SVN-Revision: 29847	2012-01-22 13:43:23 +00:00
Gabor Juhos	557cf076b4	ramips: sysupgrade for ESR-9753 This patch add sysupgrade for Engenius ESR-9753 Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29824	2012-01-20 10:49:26 +00:00
John Crispin	a2708d11e8	ramips: Rework ramips_eth to not require irqsave locking anymore Previously the tx housekeeping was done in a spin_lock_irqsave critical section which causes irqs to be disabled during that time. Since the housekeeping is already prepared to be scheduled as a tasklet process the housekeeping only in softirq context and revise the locking between the tx path and the housekeeping tasklet by using a normal spin_lock which in most situations will be a NOP anyway. This makes sure that interrupts are only disabled for a short time since in the worst case the housekeeping might have to free up to 256 skbs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 29762	2012-01-17 11:23:11 +00:00
Gabor Juhos	244c322d25	ramips: rt288x: add support for the Belkin F5D8235-4 v1 board Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617	2011-12-28 08:43:43 +00:00
Gabor Juhos	f50b02b559	ramips: rt288x: change base address and window size of flash bank 0 SVN-Revision: 29616	2011-12-28 08:43:36 +00:00
Gabor Juhos	98437278c4	ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615	2011-12-28 08:43:32 +00:00
Gabor Juhos	723d8dd74f	ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612	2011-12-27 16:56:30 +00:00
Gabor Juhos	7b1e525b56	ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604	2011-12-23 14:27:16 +00:00
Gabor Juhos	2cb946f5b4	ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603	2011-12-23 14:27:10 +00:00
Gabor Juhos	03bce34384	ramips: define firmware partition for Omnima MiniEMBWiFi Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> SVN-Revision: 29602	2011-12-23 14:27:05 +00:00
Gabor Juhos	0c38d36488	ramips: add support for Omnima MiniEMBWiFi board This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533	2011-12-14 20:51:26 +00:00
Gabor Juhos	43bd4c6ad1	ramips: fix mac addresses on the DIR-300/600 boards SVN-Revision: 29471	2011-12-06 20:06:08 +00:00
Gabor Juhos	5ef6ec4a31	ramips: set mac addresses for the NBG-419N Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454	2011-12-05 17:27:07 +00:00
Gabor Juhos	750d560767	ramips: set preinit interface mac on the hw550-3g board Based on a patch by Daniel Golle <dgolle@allnet.de> SVN-Revision: 29453	2011-12-05 17:27:06 +00:00
Gabor Juhos	b5d7b359b2	ramips: use ramips_get_mac_* functions in the preinit script SVN-Revision: 29452	2011-12-05 17:27:04 +00:00
Gabor Juhos	4d5b940e66	ramips: move ramips_get_mac_* functions to lib/ramips.sh SVN-Revision: 29451	2011-12-05 17:27:03 +00:00
Gabor Juhos	cc853acb3a	ramips: add ramips_ prefix to get_mac_{binary,nvram} functions SVN-Revision: 29450	2011-12-05 17:27:02 +00:00

... 7 8 9 10 11 ...

1167 commits