Commit graph

35570 commits

Author SHA1 Message Date
Christian Lamparter
3f506bdbb0 apm821xx: fix atheros PCIe cards on the MR24
The consolidation of the MR24 and WNDR4700 subtargets
into the nand subtarget broke MR24's atheros wlan.
This was because the wndr4700's board code used a
pci_fixup routines to supply the ath9k module with
the calibration data.

This is not necessary on the MR24 as it has standard
mini-pcie ports. Hence the two AR9380 mini-pcie cards
do not need any calibration data overrides.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-25 10:38:48 +02:00
Christian Lamparter
08257a4053 apm821xx: use lzma compression for the initramfs images
The MR24's u-boot takes it sweet time decompressing the
LZMA-packed initramfs image. A user reported that
compared to the old gzip method in v2: it "takes a ton
longer to decompress like 4\x the old boot time for
decompression".

This patch also fixes a issue with the WNDR4700's initramfs
image getting to big and causing the following u-boot crash
during the decompression:

"Uncompressing Multi-File Image ... Error: inflate() returned -5
out-of-mem or overwrite error - must RESET board to recover"

This patch fixes both issues by reverting the MR24's initramfs
compression method back to gzip. And choosing to compress the
initramfs within the initramfs image as LZMA by default.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-25 10:38:11 +02:00
Felix Fietkau
04a6984319 ath9k: remove intermediate queueing patch until it is fixed properly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-24 22:41:20 +02:00
Hauke Mehrtens
bafeb90745 iperf3: update to version 3.1.3
old size:
iperf3_3.0.11-1_mips_34kc_dsp.ipk       30147

new size:
iperf3_3.1.3-1_mips_34kc_dsp.ipk        33640

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:05:50 +02:00
Hauke Mehrtens
9cbb51ff8c iperf: update to version 2.0.9
old size:
iperf_2.0.8-1_mips_34kc_dsp.ipk 27911

new size:
iperf_2.0.9-1_mips_34kc_dsp.ipk 28681

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:05:33 +02:00
Hauke Mehrtens
bdf9243c1b cyassl: update to wolfssl version 3.9.6
Changelog: https://www.wolfssl.com/wolfSSL/Docs-wolfssl-changelog.html

old size:
libcyassl_3.9.0-1_mips_34kc_dsp.ipk     147552

new size:
libcyassl_3.9.6-1_mips_34kc_dsp.ipk     150087

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:05:03 +02:00
Hauke Mehrtens
7d38128f6a curl: update to version 7.50.0
Changelog: https://curl.haxx.se/changes.html

old sizes:
libcurl_7.49.0-1_mips_34kc_dsp.ipk      97569
curl_7.49.0-1_mips_34kc_dsp.ipk         37925

new sizes:
libcurl_7.50.0-1_mips_34kc_dsp.ipk      97578
curl_7.50.0-1_mips_34kc_dsp.ipk         38017

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:04:13 +02:00
Felix Fietkau
cd91f384ac openssl: re-enable NPN by default
Several packages rely on it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-24 14:43:44 +02:00
Felix Fietkau
cb8f322d93 openssl: add back the CAST cipher by default
At least netatalk and some ipsec packages use it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-24 14:42:18 +02:00
Felix Fietkau
07577c5ebe tools: bring back genext2fs for apm821xx
This reverts commit 8c68c104ea.
It is used for apm821xx, which needs ext2 (not ext4) images for some
devices.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-23 19:37:20 +02:00
Alexey Brodkin
18f368fa35 linux: Get rid of 000-keep_initrafs_the_default.patch
With that patch in place for initramfs no additional options are
reported for "/" partition. What's really important is missing
info about sizes. Which in its turn makes opkg think that there's
no space on "/" partition to install software.

I understand that's a sort of corner-case, people rarely install
packages on ramfs but anyways why not?

Just in case that's what I see with the patch:
---------------------->8--------------------
root@lede:/# cat /proc/mounts
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
---------------------->8--------------------

And without:
---------------------->8--------------------
root@lede:/# cat /proc/mounts
rootfs / rootfs rw,size=256168k,nr_inodes=32021 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
---------------------->8--------------------

Note how different is entry for rootfs.

And given there's no known rationale for that patch we're
getting rid of it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: Felix Fietkau <nbd@nbd.name>
2016-07-23 19:04:37 +02:00
Felix Fietkau
600fd467d8 openssl: revert the no-ripemd change, openssh needs that cipher
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-23 19:03:47 +02:00
Ben Greear
164a405a48 ath10k: Support installing CT firmware for QCA9984 NICs.
This firmware has been lightly tested on non LEDE system
to date, and will be undergoing further testing and development.
Allow users to easily install this on their LEDE system as
they prefer.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-23 12:28:48 +02:00
Ben Greear
9971ab0457 ath10k-ct-firmware: Update to latest 9880 firmware.
Fixes some issues with AES encryption and macbooks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-23 12:28:33 +02:00
Ben Greear
eb8ffbebf8 ath10k-ct: Update to latest ath10k-ct driver.
Adds support for 9984 NICs, and an upstream bugfix or two.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-23 12:28:25 +02:00
Alexey Brodkin
84a1a0edf0 sunxi/pcduino3: Remove selection of absent rtl8188eu
Since commit 217a643755 "wireless: remove rtl8188eu (staging)"
there's no point in selection of the missing module.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@openwrt.org>
Cc: Zoltan Herpai <wigyori@uid0.hu>
2016-07-23 12:27:42 +02:00
Dirk Feytons
3ad8bc4366 openssl: add option to disable SRP support
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 12:10:41 +02:00
Dirk Feytons
057b116e09 openssl: add --gc-sections
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 12:10:08 +02:00
Dirk Feytons
41da31ac2c openssl: remove some unneeded functionality and algorithms
The patch needed for this commit has been sent upstream:
https://github.com/openssl/openssl/pull/1155

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [add back bf and srp]
2016-07-23 12:09:51 +02:00
Dirk Feytons
f16fc21675 openssl: add option to disable PSK support
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:31 +02:00
Dirk Feytons
0099748fd6 openssl: add option for NPN support
NPN has been superseded by ALPN so NPN is disabled by default
The patch has been sent to OpenSSL for inclusion, see
https://github.com/openssl/openssl/pull/1100

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:31 +02:00
Dirk Feytons
eb4fc91a81 openssl: add option to disable compression support
By default it's disabled. After the CRIME attack it seems the use of
compression is discouraged.

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:31 +02:00
Dirk Feytons
db11695aa6 openssl: add option to omit deprecated APIs
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:30 +02:00
Felix Fietkau
8fb89f7e73 ledtrig-usbdev: fix duplicate match detection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-23 10:30:45 +02:00
Felix Fietkau
f1e085adfe ar71xx: add ath10k firmware to profile defaults where ath10k is used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 16:06:39 +02:00
Felix Fietkau
11fc0cd1b1 image.mk: create default ubifs before calling legacy image build code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 13:58:58 +02:00
Felix Fietkau
39429b3d20 apm821xx: rework image build code for MyBook Live
Eliminate redundant mkfs calls, preparation for upcoming image build
core rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 12:49:57 +02:00
Felix Fietkau
3886644632 apm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entry
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 12:49:57 +02:00
Felix Fietkau
44c39d5812 apm821xx: add missing default profiles for subtargets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 09:48:12 +02:00
Christian Lamparter
9e0fd1b52a apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720
This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720

hardware highlights:

CPU:	AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz)
	Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits)
	32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board:	AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG
DRAM:	256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3)
NAND:	128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64)
ETH:	Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN)
USB:	2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included)
SATA:	1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA).
WLAN1:	Atheros AR9380 5GHz 802.11an 3:3x3
WLAN2:	Atheros AR9581 2.4GHz 802.11bgn 3:3x3
SDCARD:	GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host)
I2C:	GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor)
	TC654    (i2c-0 @ 0x1b - Dual PWM fan Speed controller)

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

INFO: Since this device only has a NAND chip. I opted for going with
root.squashfs in a UBI volume. There's no squashfs/jffs2 image.

This target produces three images.
  a. netgear factory image
     This image can be used to flash the Netgear WNDR4700 via the
     firmware recovery mechanism and the web admin site.

     The bootloader can be instructed to do a firmware recovery via the
     # fw_recovery
     command. It will start a tftp server and listen on 192.168.1.1
     (the ipaddr variable in u-boot) for incoming, binary tftp clients.
     The firmware recovery mechanism is also started if any of the flash
     content which contains the kernel, device-tree definitions or the
     (fake)rootfs fails to verify or load.

  b. sysupgrade.tar image for sysupgrade
     An sysupgrade will replace the entire current LEDE installation
     with a newer version. This does include the kernel and the ubi rootfs
     partition. The configuration can be carried over automatically as well
     if desired.

     simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run:

     root@lede:~# sysupgrade sysupgrade.tar

     and let it reboot.

     Note: The devicetree flash area is NOT updated. Until the devicetree
	   definition is stable, this can lead to all sorts of hardware
	   detection problems! So make sure, if you experience issues: try
	   the fw_recovery. If you are unsure whenever this affects you:
	   test if you can reproduce your issue with the initramfs method.
	   As it will always have up-to-date device-tree definitions.

  c. initramfs image for TFTP (for development and testing)
     To use the initramfs method, follow the following steps:
       1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin"
	  file to to the root directory of your TFTP server.

       2) rename it to wndr4700.bin

       3) On the WNDR4700 - Hit Enter during u-boot and insert:
	  # tftp 400000 wndr4700.bin; run addtty; bootm 400000 -

     This will boot the LEDE image.

     Note: The default tftp server is 192.168.1.7, if you want to change it:
     # setenv serverip 192.168.8.7;

     Note2: The default address for the WNDR4700 is 192.168.1.1:
     # setenv ipaddr 192.168.8.8;

     Note: Connect you tftp server on the last LAN port (not the WAN)

Note: The firmware for the USB 3.0 Host chip is not included anymore.
Therefore the two USB 3.0 ports will not work without the
uPD7070x-firmware package installed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter
47eeb9f857 apm821xx: lm90 add thermal sensor interface support for device tree
From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch:
"This patch adds to lm90 temperature sensor the possibility
to expose itself as thermal zone device, registered on the
thermal framework.

The thermal zone is built only if a device tree node
describing a thermal zone for this sensor is present
inside the lm90 DT node. Otherwise, the driver behavior
will be the same."

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter
b46e2a6d95 apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllers
This patch adds a hwmon driver for the Microchip TC654 and TC655
Dual SMBus PWM Fan Speed Controllers with Fan Fault detection.

The chip is described in the DS2001734C Spec Document from Microchip.
It supports:
	- Shared PWM Fan Drive for two fans
	- Provides RPM
	- automatic PWM controller (needs additional
	  NTC/PTC Thermistors.)
	- Overtemperature alarm (when using NTC/PTC
	  Thermistors)

The TC654 is used by the Netgear WNDR47X0 to control its
system fan.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter
dc7efaefb5 apm821xx: add support for the Western Digital MyBook Live Series
Hardware Highlights:

This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC  UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
     32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM:  256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.

This target produces two images for a target.
 1. ext4 image
    The extracted/raw image can be directly installed on
    the internal HDD via "dd if=img.ext4 of=/dev/sdX".

    This can either be done in place with the stock MyBook Live
    firmware via ssh. Or by removing the HDD and writing the image
    with a different PC.

    The the compressed images are useful for sysupgrade.

 2. recovery.tar image for TFTP and Serial.

    extract the recovery.tar to a TFTP server directory.

    On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
    # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self

    Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter
d37d16488c apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7
This patch fixes the sata_dwc_460ex SATA driver which is used
by the SATA controllers in the MyBook Live Series and WNDR4700.

The code was backported from the upstream kernel.
It can be dropped completely on 4.7+.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter
ea91ee13a7 apm821xx: dw_dmac: backport fixes and cleanups from 4.7
This patch fixes the dw_dmac dma engine which is used
by the SATA controllers in the MyBook Live Series and WNDR4700.

The code was backported from the upstream kernel.
It can be dropped completely on 4.7+.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Chris Blake
a57d6e2d47 apm821xx: add support for the Cisco Meraki MR24
This patch adds support for the Cisco Meraki MR24 Access point
to the apm821xx target.

Board:		MR24 - Meraki MR24 Cloud Managed Access Point
CPU:		APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100)
Flash size:	32MiB
RAM Size:	128MiB
Wireless:	Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz
Ethernet ports:	1x Gigabit Atheros AR8035

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

For flashing instructions, visit:
<https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-22 09:48:12 +02:00
Chris Blake
3827ce2c3d apm821xx: add support for the apm821xx device target
This adds a new target for PowerPC APM82181 and APM82161
(464-based) boards, as well as adds support for the booke-wdt
watchdog package.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-07-22 09:48:12 +02:00
Christian Lamparter
39f3408732 ppc4xx: remove booke-wdt watchdog package
This patch gets rid of the booke watchdog kmod package.
Instead the affected boards will enable it in their
kernel configs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Mathias Kresin
e6a7e6ed25 lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3A
Both devices were converted to the new image build code but still using
the LegacyDevice define. Therefore an image isn't created for the
mentioned devices.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-07-22 09:46:44 +02:00
Matthias Schiffer
b82c8ddf8c
libpcap: fix dependency of install-shared-so make target
There seems to be a situation in which a rebuild of libpcap.so is triggered
in the install step of the libpcap Makefile. libpcap.so is the wrong
target, leading to the build failure reported in [1].

Fix the dependency of install-shared-so to $(SHAREDLIB) so the build can
succeed in this case.

[1] https://dev.openwrt.org/ticket/19894

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-21 17:57:17 +02:00
Felix Fietkau
c7a5bb5a7e samba36: avoid picking up a dependency on libunwind (fixes GH #212)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 17:33:17 +02:00
Felix Fietkau
ca6375ac51 hostapd: fix an error on parsing radius_das_client
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 16:58:50 +02:00
Felix Fietkau
14eb09d5c0 ath10k: add NAPI support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 16:17:08 +02:00
Felix Fietkau
467d15b73d mac80211: add a mesh related fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 16:16:49 +02:00
Felix Fietkau
d22fc1973c kernel: enable CONFIG_SND_PROC_FS by default (FS#54)
Some user space code relies on it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 15:33:50 +02:00
Felix Fietkau
ab3bf82e01 toolchain/gcc: disable libmpx to fix build errors on x86 with gcc 6.1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 15:22:04 +02:00
Felix Fietkau
c6c81351b7 ar71xx: add missing profile for the nand subtarget (FS#56)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:58:47 +02:00
Felix Fietkau
16209710d9 ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:52:12 +02:00
Felix Fietkau
ad323881df ar71xx: fix more image build code whitespace/tab issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:49:01 +02:00
Felix Fietkau
8265fdcc4d imagebuilder: strip DEVICE_ prefix from profiles (FS#55)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:41:20 +02:00