KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
31257 commits 3 branches 0 tags 154 MiB
Commit graph

14077 commits

Author SHA1 Message Date
Jonas Gorski
d8ba40cfcd brcm63xx: use relocate to move the kernel back to start of ram 
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327).

Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45164
 2015-03-30 20:20:15 +00:00
Jonas Gorski
8353a3bd45 generic: relocate: make the cacheline size configurable 
Different targets have different cache line sizes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45163
 2015-03-30 20:20:10 +00:00
Jonas Gorski
703c41cf01 ramips: move relocating loader to common location 
Allow other targets to use it, too.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45162
 2015-03-30 20:20:08 +00:00
Gabor Juhos
3129f0c6f2 ar71xx/mikrotik: re-enable 4KiB flash sector erase 
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45161
 2015-03-30 19:57:52 +00:00
Gabor Juhos
62a8665fea ar71xx: re-enable AR8216_PHY_LEDS 
The setting has been lost during the transition to 3.18.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45160
 2015-03-30 18:12:54 +00:00
Gabor Juhos
18f6a34113 ar71xx: sync kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45159
 2015-03-30 18:12:50 +00:00
John Crispin
2b925161d8 xburst: add missing symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45155
 2015-03-30 12:47:51 +00:00
Steven Barth
7e7f329ccf kernel/generic: (try) fixing MAP-E patch broken in 4.0 
Now it at least compiles, otherwise untested.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 45145
 2015-03-30 08:48:51 +00:00
Rafał Miłecki
1751676c8b brcm47xx: convert Netgear WNDR3700 V3 to the new image building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45144
 2015-03-29 19:53:11 +00:00
Rafał Miłecki
8e4b74b9fe brcm47xx: convert Linksys E1200 V2 to the new image building system 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45143
 2015-03-29 18:15:38 +00:00
John Crispin
23d37c1208 ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC 
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
  the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
  after the zero (which wasn't always visible using busybox tools, but could
  confuse other scripts)

Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.

The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.

The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.

Fixes #18992.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45140
 2015-03-29 12:58:01 +00:00
Imre Kaloz
ebf1e2461a x86_64: add description, maintainership 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45138
 2015-03-29 12:17:39 +00:00
Felix Fietkau
661f05262b arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45132
 2015-03-29 07:36:17 +00:00
Luka Perkov
1e2f88b17b imx: add initial version of 3.18 support 
This is build tested only.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45125
 2015-03-29 05:48:56 +00:00
Luka Perkov
375337266d kernel: add few missing symbols 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45118
 2015-03-29 04:50:16 +00:00
Luka Perkov
d949d88ef6 kernel: add symbol 
Several targets are not using EMAC_ROCKCHIP so define it in generic config.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45117
 2015-03-29 04:43:59 +00:00
Felix Fietkau
e731ea23a8 x86: add myself as maintainer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45116
 2015-03-29 04:32:15 +00:00
Felix Fietkau
196fb76a4c x86: make x86_64 a subtarget instead of a standalone target 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45115
 2015-03-29 04:32:01 +00:00
Felix Fietkau
09aad60610 x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45114
 2015-03-29 04:31:35 +00:00
Felix Fietkau
795e7cf60d kernel: fix linux/spi/spidev.h portability issues with musl 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45105
 2015-03-29 04:28:24 +00:00
Felix Fietkau
9444bc1ee2 kernel: clean up fq_codel default patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45104
 2015-03-29 04:28:02 +00:00
Florian Fainelli
85b0d25861 adm8668: switch to 3.18 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45095
 2015-03-28 18:18:50 +00:00
Florian Fainelli
f51f3ee9bc adm8668: add 3.18 support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45094
 2015-03-28 18:18:38 +00:00
Florian Fainelli
26cf81b94b kernel: refresh 3.18 patches 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 45093
 2015-03-28 18:17:46 +00:00
Felix Fietkau
0b13d69bba arm64: update to linux 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45092
 2015-03-28 13:38:52 +00:00
Felix Fietkau
693e5aae41 brcm63xx: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45089
 2015-03-28 13:21:09 +00:00
Felix Fietkau
130acd0f4c mxs: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45088
 2015-03-28 13:21:04 +00:00
Felix Fietkau
b63aa281ee rb532: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45087
 2015-03-28 13:20:58 +00:00
Felix Fietkau
56c580f5f4 uml: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45086
 2015-03-28 13:20:52 +00:00
Felix Fietkau
7427007193 x86: remove the olpc subtarget, it has been unmaintained for a long time 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45083
 2015-03-28 11:37:08 +00:00
Felix Fietkau
518d2b90e6 iop32x: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45082
 2015-03-28 10:44:55 +00:00
Felix Fietkau
22b38f145d cobalt: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45081
 2015-03-28 10:44:49 +00:00
Felix Fietkau
04182658ef sibyte: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45080
 2015-03-28 10:44:44 +00:00
Felix Fietkau
e38b78926a sparc: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45079
 2015-03-28 10:44:37 +00:00
Felix Fietkau
40c5bee0cd cns21xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45078
 2015-03-28 10:44:31 +00:00
Felix Fietkau
65c567da13 rb532: switch to 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45073
 2015-03-27 21:22:22 +00:00
Felix Fietkau
2daa34da02 rb532: align partitions to 128KB 
because block2mtd wants "erasesize must be a divisor of device size" since 3.15

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45072
 2015-03-27 21:22:17 +00:00
Felix Fietkau
c2d1ad30e8 rb532: add 3.18 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45071
 2015-03-27 21:22:10 +00:00
John Crispin
85bf288428 lantiq: remove arphaned folder 
the new buildbot was picking this up as a valid target.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45068
 2015-03-27 19:47:22 +00:00
John Crispin
ddb5ab2acf ralink: mt7621 add ECHI OCHI XCHI support 
Lets hope that this time it won't break the other ralink targets.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45067
 2015-03-27 19:07:29 +00:00
Felix Fietkau
c6a29d2528 gemini: fix usb driver compilation on 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45065
 2015-03-27 16:03:16 +00:00
Zoltan Herpai
19db04e699 mxs: update dtb path in image Makefile 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45056
 2015-03-27 02:35:11 +00:00
Felix Fietkau
f76a85515a ar71xx: add missing id for WNR2000v3 image (fixes #18959) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45054
 2015-03-27 00:35:34 +00:00
Zoltan Herpai
a077e4af96 mxs: bump to 3.18 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45053
 2015-03-26 23:35:50 +00:00
Zoltan Herpai
01748fbce2 mxs: add sdcard image builder 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45052
 2015-03-26 23:34:43 +00:00
Zoltan Herpai
39370cbe25 mxs: enable uboot-mxs-duckbill build for duckbill profile 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45044
 2015-03-26 23:04:27 +00:00
Luka Perkov
3012319505 generic: drop old kirkwood mach types 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45043
 2015-03-26 22:48:31 +00:00
Zoltan Herpai
1f26498751 mxs: add 3.18 support 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 45041
 2015-03-26 22:18:47 +00:00
Felix Fietkau
65708f749a gemini: make dd commands more portable 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45039
 2015-03-26 20:37:19 +00:00
Felix Fietkau
6cda886f60 gemini: switch mantainer to myself 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45038
 2015-03-26 20:37:09 +00:00
Felix Fietkau
17532417c7 gemini: nuke 3.10 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45037
 2015-03-26 20:36:59 +00:00
Felix Fietkau
b953a14036 gemini: remove broken flag 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45036
 2015-03-26 20:36:49 +00:00
Felix Fietkau
dc622768a7 gemini: switch to 3.18 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45035
 2015-03-26 20:36:40 +00:00
Felix Fietkau
44b3e3af17 gemini: don't build jffs2 image for Raidsonic board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45034
 2015-03-26 20:36:35 +00:00
Felix Fietkau
a304f3d2b6 gemini: add 3.18 support 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 45033
 2015-03-26 20:36:30 +00:00
Lars-Peter Clausen
b18f5eb44a xburst: Update to 3.18 
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

SVN-Revision: 45031
 2015-03-26 19:46:01 +00:00
Felix Fietkau
c25bf32f8d ar71xx: fix image size checks for WNDR3700 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45030
 2015-03-26 18:50:44 +00:00
John Crispin
40d25d3eb5 ralink: drop xhci patch, it break !mt7621 builds 
will re-add it tomorrow after fixing it

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45028
 2015-03-26 16:24:19 +00:00
John Crispin
2cedb63d84 ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org> 
SVN-Revision: 45027
 2015-03-26 14:49:26 +00:00
Imre Kaloz
f6eff33b8d mvebu: fixup usb3 support on the a38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45026
 2015-03-26 14:32:45 +00:00
Imre Kaloz
4bac1253c1 generic/4.0: upgrade to 4.0-rc5 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45025
 2015-03-26 14:06:42 +00:00
Imre Kaloz
23b880b373 mvebu: add a coherency fix which didn't make it to -stable, yet 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45024
 2015-03-26 13:52:21 +00:00
John Crispin
21e0f98903 ralink: add default pinctrl node for mt7621 eval kit 
fixes #19213

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45022
 2015-03-26 12:23:02 +00:00
John Crispin
0a9e38bb21 ralink: mt7621 add ECHI OCHI XCHI support 
The usb stroage not working since updated 3.18. Porting from MTK's source code.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45021
 2015-03-26 10:59:51 +00:00
John Crispin
024e0c1835 ralink: add FireWRT power button 
Signed-off-by: Jay Weng <fl.service@t-firefly.com>

SVN-Revision: 45019
 2015-03-26 10:59:36 +00:00
John Crispin
10aa09b731 ralink: MT7621 add i2c controller driver 
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.

Signed-off-by: Jay Weng <fl.service@t-firefly.com>

SVN-Revision: 45018
 2015-03-26 10:59:31 +00:00
John Crispin
ad91262a94 kernel: add missing symbol 
Signed-off-by: John Szakmeister <john@szakmeister.net>

SVN-Revision: 45017
 2015-03-26 10:59:24 +00:00
John Crispin
67c83a6595 x86: add missing symbol to xen_domu 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45016
 2015-03-26 10:59:10 +00:00
John Crispin
2d994f2fdc cobalt: enable bridge 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45014
 2015-03-26 10:58:59 +00:00
John Crispin
c67144cc05 kernel: extend seccomp with a LOG action 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45007
 2015-03-26 10:58:03 +00:00
Felix Fietkau
414e8ba634 bcm53xx: use the correct kernel image 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45003
 2015-03-26 10:42:36 +00:00
Imre Kaloz
af69bf56b6 drop 3.19 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45002
 2015-03-26 09:42:59 +00:00
Felix Fietkau
34b51b6f6f ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45000
 2015-03-25 17:58:14 +00:00
Felix Fietkau
8d2d62ca95 ar71xx/image: add tplink device template for new building code 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 44999
 2015-03-25 17:58:10 +00:00
Felix Fietkau
41785176ec ar71xx/image: add Build/mktplinkfw as buildstep for new build code 
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 44998
 2015-03-25 17:58:05 +00:00
Felix Fietkau
48c69e3022 bcm53xx: convert to new image building code 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44996
 2015-03-25 17:57:44 +00:00
Jonas Gorski
8ffc831bef brcm63xx: use a lookup for bcmcia's ready gpio 
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44995
 2015-03-25 15:37:38 +00:00
Jonas Gorski
1e07f8c7ff brcm63xx: fix bcm96328avng board name 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44994
 2015-03-25 15:36:26 +00:00
Jonas Gorski
4dc169f9a2 brcm63xx: fix bt v2500v dts based detection 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44993
 2015-03-25 15:36:15 +00:00
Jonas Gorski
10cdfd04e6 brcm63xx: move RTA770(B)W to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44992
 2015-03-25 15:36:12 +00:00
Jonas Gorski
0e4c1ba284 brcm63xx: move MAGIC to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44991
 2015-03-25 15:36:05 +00:00
Jonas Gorski
582dfc52f5 brcm63xx: move CPVA502+ to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44990
 2015-03-25 15:35:57 +00:00
Jonas Gorski
46b4d4d1d5 brcm63xx: move dg834g v4 to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44989
 2015-03-25 15:35:43 +00:00
Jonas Gorski
30a579c674 brcm63xx: move dsl-2640u to dts 
Also build image again(?).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44988
 2015-03-25 15:35:37 +00:00
Jonas Gorski
16ea19053a brcm63xx: move bcm963268bu_p300 to dts 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44987
 2015-03-25 15:35:24 +00:00
Jonas Gorski
ad218d3033 brcm63xx: fix compilation on 3.14 
Fixes the following issue:

drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44986
 2015-03-25 15:35:15 +00:00
Jonas Gorski
2d3371cd0f brcm63xx: Add BT Home Hub 2A support. 
Support for the BT HomeHub 2.0 Type A.

This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.

The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.

Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 44985
 2015-03-25 15:35:12 +00:00
Jonas Gorski
065d6e9047 brcm63xx: move kernel load address to 8MiB 
Fixes boot when uncompressed kernel is > 4 MiB (#19251).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44984
 2015-03-25 15:34:59 +00:00
Jonas Gorski
ee0140a678 brcm63xx: hcsimage: respect load address 
Respect the vmlinux load address when generating images.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44983
 2015-03-25 15:34:45 +00:00
Jonas Gorski
d84fafb9f3 brcm63xx: add Livebox 1 firmware image generation 
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the  bcm63xx images
builder makefile to generate the livebox 1 firmware.

I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.

Regards

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
 respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44982
 2015-03-25 15:34:40 +00:00
Jonas Gorski
77e3d442b0 brcm63xx: add a dummy image recipe for boards missing proper images 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44981
 2015-03-25 15:34:26 +00:00
Jonas Gorski
02d68c2b57 brcm63xx: drop non-dtb image recipe 
All images generated contain dtbs, so it is now unused.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44980
 2015-03-25 15:34:23 +00:00
Felix Fietkau
fafa3f57e3 kernel: merge upstream bgmac driver improvements 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44978
 2015-03-25 14:30:46 +00:00
Felix Fietkau
68ca1f285c bcm53xx: enable the full-line-of-zero optimization in the cache controller 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44977
 2015-03-25 14:30:40 +00:00
Gabor Juhos
621979b49f kernel: yaffs: use new_sync_{read,write} for 3.18+ 
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:

  root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
  [ 2884.110000] yaffs: dev is 32505861 name is "mtdblock5" rw
  [ 2884.120000] yaffs: passed flags ""
  root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
  [ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
    address 00000000, epc == 00000000, ra == 80129414
  [ 2902.710000] Oops[#1]:
  [ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
  [ 2902.710000] task: 878e7a20 ti: 868c6000 task.ti: 868c6000
  [ 2902.710000] $ 0   : 00000000 fffffff8 00000000 00000000
  [ 2902.710000] $ 4   : 868c7e70 868c7ea8 00000001 868c7f08
  [ 2902.710000] $ 8   : 00000038 80064f18 80072280 00000000
  [ 2902.710000] $12   : 7fa152b8 7709e3a0 00c42008 7709e3a0
  [ 2902.710000] $16   : 868c7f08 86a46000 00000010 878e7a20
  [ 2902.710000] $20   : 7705c4b0 00000010 00000000 00000000
  [ 2902.710000] $24   : 770960bc 7707dd78
  [ 2902.710000] $28   : 868c6000 868c7e58 7f8e7030 80129414
  [ 2902.710000] Hi    : 00000000
  [ 2902.710000] Lo    : ffffffff
  [ 2902.710000] epc   : 00000000   (null)
  [ 2902.710000]     Not tainted
  [ 2902.710000] ra    : 80129414 do_sync_read+0x7c/0xb4
  [ 2902.710000] Status: 1900dc03 KERNEL EXL IE
  [ 2902.710000] Cause : 00800008
  [ 2902.710000] BadVA : 00000000
  [ 2902.710000] PrId  : 00019750 (MIPS 74Kc)

Change the yaffs code to use the new_sync_{read,write} functions
instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 44974
 2015-03-25 08:59:12 +00:00
Rafał Miłecki
8fdd0fb07c kernel: backport rest of bcma patches 
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44970
 2015-03-24 10:39:10 +00:00
Rafał Miłecki
a7724918c9 kernel: mac80211: backport bcma patch renaming IRQ control function 
This backports upstream commit 702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44969
 2015-03-24 10:38:59 +00:00
Rafał Miłecki
a4d7571367 mark 3.10 targets as broken 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44968
 2015-03-24 10:38:50 +00:00
Jo-Philipp Wich
02e2548b84 x86: use PARTUUID instead explicitly specifying the device by default 
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.

It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.

Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44966
 2015-03-24 10:08:12 +00:00
Felix Fietkau
5d9eeab64a build: remove obsolete references to cris and avr32 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44965
 2015-03-24 10:07:40 +00:00
Jo-Philipp Wich
d830d34b00 x86_64: fix PARTUUID format with leading zeros 
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44959
 2015-03-24 10:06:40 +00:00
Felix Fietkau
2450985de9 avr32: remove target 
It depends on obsolete compilers and only works on one device (an
evaluation board).

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44956
 2015-03-24 10:06:14 +00:00
Rafał Miłecki
3b6c70b7fc kernel: update bcma with most patches from wireless-drivers-next 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44955
 2015-03-24 07:15:31 +00:00
Rafał Miłecki
eb90a6d7d8 kernel: backport fixed_phy_register EXPORT fix from 3.19 
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44954
 2015-03-23 18:39:16 +00:00
Imre Kaloz
2375f37723 generic/3.18: refresh patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44951
 2015-03-23 13:28:52 +00:00
Imre Kaloz
5be4f2b5b8 mvebu: update mamba dts 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44949
 2015-03-23 12:44:30 +00:00
Felix Fietkau
0a84da0841 bcm53xx: add missing cache controller errata options 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44947
 2015-03-23 10:14:27 +00:00
Felix Fietkau
a6f914d573 bcm53xx: remove linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946
 2015-03-23 10:14:20 +00:00
Felix Fietkau
e890a3bc9a ramips: make ethernet register map u16 instead of u32 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44940
 2015-03-22 15:11:14 +00:00
Rafał Miłecki
fb6164a377 bcm53xx: add SMP support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44939
 2015-03-22 15:07:40 +00:00
Nicolas Thill
577da84c25 uml: bump to 3.18 
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44937
 2015-03-22 12:36:57 +00:00
John Crispin
3c0ea6eced au1000: drop 005-fix-cpu-clk.patch 
it has been upstreamed and treackled down with the latest 3.18 update

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44935
 2015-03-22 07:03:02 +00:00
Rafał Miłecki
e0155ad7b0 bcm53xx: add support for Asus RT-AC68U 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44934
 2015-03-22 01:57:15 +00:00
Rafał Miłecki
79c152b56b bcm53xx: fix Asus RT-AC87U magic (even if not used yet) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44933
 2015-03-22 01:57:10 +00:00
Rafał Miłecki
d324dd4ff3 bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44932
 2015-03-22 01:57:06 +00:00
Rafał Miłecki
a4523c8e1d bcm53xx: refresh patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44931
 2015-03-22 01:56:47 +00:00
John Crispin
35c52bc261 oxnas: remove pre kernel 3.18 support from pinctrl driver 
just some pruning...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44923
 2015-03-21 21:47:20 +00:00
John Crispin
3256194aff oxnas: add support for kernel 4.0 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44922
 2015-03-21 21:47:03 +00:00
John Crispin
908a82ab61 kernel: add two more missing config symbols 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44921
 2015-03-21 21:46:47 +00:00
Felix Fietkau
7d6eec16b6 brcm2708: remove a patch that was added in the stable update (fixes #19253) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44920
 2015-03-21 21:24:08 +00:00
Felix Fietkau
37912d66c2 ramips: increase NAPI weight for mt7621 to improve routing performance a bit more 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44918
 2015-03-21 12:08:07 +00:00
Rafał Miłecki
ba10454b91 kernel: backport bgmac patches 
This allows dropping some hacky bcm53xx bgmac patch forcing link state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44917
 2015-03-21 11:45:50 +00:00
Rafał Miłecki
782e432797 bcm53xx: enable FIXED_PHY, we will need it for bgmac 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44916
 2015-03-21 11:45:27 +00:00
Felix Fietkau
db3b862d1c kernel: fix ipsec related regression in the netfilter rtcache patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44913
 2015-03-20 22:13:34 +00:00
Imre Kaloz
b95a9f01c1 mvebu: set default regdomain 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
 2015-03-20 12:15:40 +00:00
Felix Fietkau
975e1357e6 ramips: fix LAN/WAN MAC address for WSR-600/1166 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44903
 2015-03-20 09:37:07 +00:00
John Crispin
1773aa5163 octeon: add er8 sysupgrade support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44902
 2015-03-20 08:49:08 +00:00
John Crispin
e9b6602a84 octeon: Add MMC support for EdgeRouter ER8 
this is a backport of a series posted on the lmo mailing list

Signed-off-by: Jonathan Thibault <jonathan@navigue.com>

SVN-Revision: 44901
 2015-03-20 08:49:02 +00:00
Felix Fietkau
dac483acb4 ramips: fix WSR-1166 green power LED 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44898
 2015-03-19 21:51:44 +00:00
Michael Büsch
bb81ff2374 omap24xx: Add basic config for linux-4.0 
Also remove 3.3 config. It's broken and unsupported.

SVN-Revision: 44895
 2015-03-19 18:45:32 +00:00
Steven Barth
9b1840b861 ipv6: fix throw routes 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 44894
 2015-03-19 15:46:03 +00:00
Felix Fietkau
32a6800a41 kernel: remove linux 3.8 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44890
 2015-03-19 11:58:59 +00:00
Felix Fietkau
3600b84cbd ep93xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44889
 2015-03-19 11:58:54 +00:00
Felix Fietkau
941ac35f77 mpc52xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44888
 2015-03-19 11:58:48 +00:00
Felix Fietkau
3581298348 mpc83xx: moved to targets feed 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44887
 2015-03-19 11:58:43 +00:00
Felix Fietkau
75e828c117 ar71xx: fix a double dereference in the unaligned access patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44885
 2015-03-19 11:58:30 +00:00
Felix Fietkau
2077b18e6b x86_64: remove unused patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44884
 2015-03-19 11:58:22 +00:00
Imre Kaloz
e3d19988cf mvebu: add Linux 4.0 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44882
 2015-03-19 10:25:44 +00:00
Imre Kaloz
05bf6e0f2e generic/4.0: fix ubi EOF marker patch 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44881
 2015-03-19 10:13:21 +00:00
Imre Kaloz
0d8d48641d generic/4.0: add missing symbols 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44880
 2015-03-19 10:11:20 +00:00
Felix Fietkau
b011293d0b kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44877
 2015-03-18 18:22:41 +00:00
Felix Fietkau
17afb853ee kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4 
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44876
 2015-03-18 18:21:08 +00:00
Jonas Gorski
87568ebeac b53: reverse duplex bit meaning for IMP state override register 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44875
 2015-03-18 10:44:15 +00:00
Felix Fietkau
f30358d41a kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44873
 2015-03-17 17:14:48 +00:00
John Crispin
553528371b ralink: fix mt7621 i2c name 
Signed-off-by: zouxf <fl.service@t-firefly.com>

SVN-Revision: 44868
 2015-03-17 09:44:14 +00:00
John Crispin
29cf72ac07 lantiq/xrx200: cleanup default packages 
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44867
 2015-03-17 09:44:06 +00:00
John Crispin
55a71c1374 ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44866
 2015-03-17 09:43:56 +00:00
John Crispin
10c5a44017 ar71xx: enable sysupgrade for the OpenMesh OM5P-AN 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44863
 2015-03-17 09:43:37 +00:00
John Crispin
85cceb5dd0 ar71xx: add user-space support for the OpenMesh OM5P-AN 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44862
 2015-03-17 09:43:31 +00:00
John Crispin
17a1e18ee2 ar71xx: add kernel support for the OpenMesh OM5P-AN board 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44861
 2015-03-17 09:43:19 +00:00
John Crispin
2a0fcc029f ar71xx: detect GL.iNet model 
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44860
 2015-03-17 09:43:13 +00:00
John Crispin
986af9e64e lantiq: make xrx200 targets use the upstream dwc2 driver 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44857
 2015-03-17 09:42:56 +00:00
Felix Fietkau
caf94290ce kernel: add a few more missing config symbols 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44856
 2015-03-17 07:24:51 +00:00
Rafał Miłecki
76811de003 brcm47xx: support SPROM/NVRAM prefixes 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44855
 2015-03-17 07:07:17 +00:00
Rafał Miłecki
917fb76321 brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44854
 2015-03-17 07:07:00 +00:00
Rafał Miłecki
8f63c1405f brcm47xx: switch to 3.18 
Tested on BCM5357B0, BCM47186B0 and BCM4706.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44853
 2015-03-16 23:05:43 +00:00
Rafał Miłecki
7c6f7b716b bcm53xx: switch to 3.18 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
 2015-03-16 22:24:56 +00:00
Felix Fietkau
768cf6821f x86: refresh kvm_guest kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44851
 2015-03-16 21:17:45 +00:00
Felix Fietkau
06cb90f8a2 kernel: add missing config symbol 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44850
 2015-03-16 21:17:41 +00:00
Felix Fietkau
6c42f140a0 x86: enable rtl8139 ethernet support for geode by default 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44849
 2015-03-16 21:00:14 +00:00
Florian Fainelli
1488ed7c2c brcm63xx: switch maintainer 
Make Jonas the maintainer of brcm63xx.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 44848
 2015-03-16 19:51:17 +00:00
Felix Fietkau
2777b525c6 geode: set target to Geode GX1 to support older chips 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44847
 2015-03-16 18:10:17 +00:00
Jonas Gorski
343ec8d645 brcm63xx: use consistent gpio chip labeling for OF/non-OF 
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44846
 2015-03-16 13:37:38 +00:00
Jonas Gorski
81e51681e7 brcm63xx: switch to 3.18 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44841
 2015-03-16 11:53:22 +00:00
Jonas Gorski
5d0e2d1b41 brcm63xx: call brcm63xx_detect explicitly 
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44840
 2015-03-16 11:53:14 +00:00
Jonas Gorski
020e5733f9 brcm63xx: move preinit ifname detection to the preinit script 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44839
 2015-03-16 11:53:06 +00:00
Jonas Gorski
90da308e3b brcm63xx: remove obsolete brcm63xx_has_reset_button 
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44838
 2015-03-16 11:52:57 +00:00
Jonas Gorski
f0badcb769 brcm63xx: set status leds from within diag.sh 
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44837
 2015-03-16 11:52:49 +00:00
Jonas Gorski
098377af25 brcm63xx: switch to board_name based configuration 
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44836
 2015-03-16 11:52:42 +00:00
Jonas Gorski
52ffc6faa7 brcm63xx: add missing board_ids to legacy_detect 
These boards do not have a corresponding dts file yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44835
 2015-03-16 11:52:35 +00:00
Jonas Gorski
906c9ef952 brcm63xx: add device tree based board detection 
Use the device tree model property for detecting the board instead
of board id from nvram if present.

Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44834
 2015-03-16 11:52:26 +00:00
Jonas Gorski
844e92e188 brcm63xx: populate /tmp/sysinfo 
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44833
 2015-03-16 11:52:20 +00:00
Jonas Gorski
9c53e344c0 brcm63xx: base-files: rename board_name to board_id 
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44832
 2015-03-16 11:52:16 +00:00
Jonas Gorski
ca7f6d28c8 brcm63xx: Add DGND3700 v1 / DGND3800B support 
This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
 2015-03-16 11:52:10 +00:00
John Crispin
4fdb66373f netlogic: bump to 3.18 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44829
 2015-03-16 10:58:43 +00:00
Felix Fietkau
298d67ec7b mvebu: drop linux 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828
 2015-03-16 08:29:42 +00:00
John Crispin
d6b3eba475 kernel: add missing MTD_SPLIT_FIT_FW symbol 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44827
 2015-03-16 08:05:42 +00:00
John Crispin
c0a15a57bd sunxi: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44824
 2015-03-16 07:41:24 +00:00
John Crispin
eb396d6569 adm5120: drop 3.8 and 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44823
 2015-03-16 07:41:19 +00:00
John Crispin
46f01fec7f ar7: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44822
 2015-03-16 07:41:10 +00:00
John Crispin
4d11bb0d23 ixp4xx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44821
 2015-03-16 07:41:05 +00:00
John Crispin
cc8b6c6d5b octeon: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44820
 2015-03-16 07:40:59 +00:00
John Crispin
a992489e4b oxnas: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44819
 2015-03-16 07:40:54 +00:00
John Crispin
fe33c185bd mpc85xx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44818
 2015-03-16 07:40:47 +00:00
John Crispin
518d9fd2a0 cns3xxx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44817
 2015-03-16 07:40:41 +00:00
John Crispin
43c66cb434 au1000: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44816
 2015-03-16 07:40:19 +00:00
John Crispin
fb78ebb813 ar71xx: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44815
 2015-03-16 07:40:09 +00:00
John Crispin
de04a1d843 realview: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44814
 2015-03-16 07:40:02 +00:00
John Crispin
54f1c710db malta: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44813
 2015-03-16 07:39:57 +00:00
John Crispin
257671615b lantiq: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44812
 2015-03-16 07:39:52 +00:00
John Crispin
7648d80c90 ralink: drop 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44811
 2015-03-16 07:39:46 +00:00
Felix Fietkau
f2f8f6974b x86: refresh kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44810
 2015-03-16 07:12:31 +00:00
Felix Fietkau
9e0759ea26 x86: merge all geode based subtargets into one 
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44809
 2015-03-16 07:05:30 +00:00
Felix Fietkau
986b8baf9a x86: remove 3.14 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44805
 2015-03-16 05:57:04 +00:00
Felix Fietkau
7f7e0a21b8 kernel: remove linux 3.13 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44804
 2015-03-16 05:52:02 +00:00
Felix Fietkau
f26bb532cf omap: remove old kernel versions 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44803
 2015-03-16 05:51:56 +00:00
Felix Fietkau
495404e9a4 omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44802
 2015-03-16 05:51:52 +00:00
Felix Fietkau
c75c90edf6 kernel: port missing ubi EOF marker support patch to 3.19 and 4.0 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44801
 2015-03-16 05:16:14 +00:00
Felix Fietkau
adb6d8f93f kernel: fix duplicate use of patch number 490 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44800
 2015-03-16 05:16:07 +00:00
Felix Fietkau
d6fbb77bc8 kernel: add a few missing config symbols for 3.18+ 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44799
 2015-03-16 04:47:28 +00:00
Felix Fietkau
d5b99a2d74 kernel: add missing description for GRO optimization patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44798
 2015-03-16 04:19:09 +00:00
Felix Fietkau
270bc6427b kernel: skip GRO for packets bridged to other hosts 
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44797
 2015-03-15 20:32:09 +00:00
John Crispin
7ea781558f ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions 
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44795
 2015-03-15 19:39:47 +00:00
John Crispin
7f3013a480 ipq806x: fix AP148 boot from NOR 
This patch allows AP148 to boot from NOR flash.

As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).

The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44794
 2015-03-15 19:39:41 +00:00
John Crispin
582232cd7b ipq806x: add ap148 bootargs to DT 
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44793
 2015-03-15 19:39:33 +00:00
John Crispin
9a863f803e kernel: mtdsplit: add support for FIT image 
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44792
 2015-03-15 19:39:27 +00:00
John Crispin
5ca2ad1063 Fix (invert/revert) Hornet-UB WPS LED state 
My previous patch regarding the Hornet-UB board
(commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.

The above of course is confusing and hence reverting this value
back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718.

Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>

SVN-Revision: 44791
 2015-03-15 19:25:48 +00:00
Jonas Gorski
085b8e0014 b53: global config is part of the management page, not the control page 
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.

Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44788
 2015-03-15 14:19:28 +00:00
Jonas Gorski
eed031d460 brcm63xx: brcm63xxpart: fix buffer overrun in of parser 
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.

Fixes oopses like:
[    0.920000] mtd: device 2 (rootfs) set to be root filesystem
[    0.924000] 1 squashfs-split partitions found on MTD device rootfs
[    0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[    0.940000] 0x000000010000-0x0000003f0000 : "linux"
[    0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4
[    0.956000] Oops[#1]:
[    0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[    0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000
[    0.956000] $ 0   : 00000000 10008f00 00010203 81049e40
[    0.956000] $ 4   : 00010203 000000d0 00000000 000000fd
[    0.956000] $ 8   : 00000000 80015490 00000000 80370000
[    0.956000] $12   : 00000000 00000001 00000000 2f736269
[    0.956000] $16   : 00010203 000000d0 8007bde0 81482000
[    0.956000] $20   : 00000000 00000004 81481f80 803c4b78
[    0.956000] $24   : 00000000 00000000
[    0.956000] $28   : 8181e000 8181fbe8 80b20000 801ad5d4
[    0.956000] Hi    : 00000000
[    0.956000] Lo    : 00000000
[    0.956000] epc   : 8028ddf8 strlen+0x4/0x20
[    0.956000]     Not tainted
[    0.956000] ra    : 801ad5d4 kstrdup+0x30/0x84
[    0.956000] Status: 10008f03 KERNEL EXL IE
[    0.956000] Cause : 00800008
[    0.956000] BadVA : 00010203
[    0.956000] PrId  : 0002a010 (Broadcom BMIPS4350)
[    0.956000] Modules linked in:
[    0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000)
[    0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
          81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
          8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
          8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
          81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
          ...
[    0.956000] Call Trace:
[    0.956000] [<8028ddf8>] strlen+0x4/0x20
[    0.956000] [<801ad5d4>] kstrdup+0x30/0x84
[    0.956000] [<8007bde0>] allocate_partition+0x58/0x93c
[    0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144
[    0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc
[    0.956000] [<801e7870>] of_flash_probe+0x658/0x728
[    0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60
[    0.956000] [<801221f4>] driver_probe_device+0xcc/0x214
[    0.956000] [<800466f8>] __driver_attach+0x7c/0xb4
[    0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4
[    0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec
[    0.956000] [<80122400>] driver_register+0xac/0x100
[    0.956000] [<80113a5c>] do_one_initcall+0x148/0x204
[    0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220
[    0.956000] [<800157bc>] kernel_init+0x10/0x114
[    0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c
[    0.956000]
[    0.956000]
Code: 03e00008  27bd0028  00801021 <80430000> 10600003  00000000  080a377e  24420001  03e00008
[    1.192000] ---[ end trace 9d89ccbcae27fe40 ]---
[    1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.200000]
[    1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44787
 2015-03-15 14:19:22 +00:00
Jonas Gorski
9d893d39bd brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+ 
Fix the module path for linux 3.18+.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44785
 2015-03-15 14:19:10 +00:00
Jonas Gorski
12301a79b7 brcm63xx: fix 6368 cpu1 reg typo 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44784
 2015-03-15 14:19:07 +00:00
Felix Fietkau
d8d9282372 lantiq: add a better fix to strip FCS from ethernet packets on XRX200 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44771
 2015-03-15 09:47:34 +00:00
Felix Fietkau
55cdb4dbb3 lantiq: enable atm-esi by default for xrx200 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44769
 2015-03-15 07:57:51 +00:00
Felix Fietkau
17fdf5fb85 brcm2708: fix mkdosfs command line options order 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44764
 2015-03-15 05:18:50 +00:00
Felix Fietkau
65a0244ff8 x86: refresh kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44759
 2015-03-15 04:43:37 +00:00
Felix Fietkau
c062741575 x86: update to kernel 3.18 
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.

Tested on alix2, soekris net4826 and soekris net4521.

Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 44758
 2015-03-15 04:43:30 +00:00
Felix Fietkau
50d4775df0 kernel: fix portability issues of the x86 vdso2c utility 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44757
 2015-03-15 04:43:22 +00:00
Felix Fietkau
09ac7d4697 kernel: add missing config symbol for 3.18+ 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44756
 2015-03-15 04:40:10 +00:00
Rafał Miłecki
0a9b7ea932 bcm53xx: support NVRAM prefixes with extra / in devpath 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44755
 2015-03-14 16:35:56 +00:00
Felix Fietkau
578aa97f8c x86: disable rts/cts for serial console in grub - fixes net48xx boot issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44753
 2015-03-14 08:38:35 +00:00
Felix Fietkau
c5aa269d57 kernel: linux 3.19 also needs the network namespace related fd export patch (#19161) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44751
 2015-03-14 05:38:14 +00:00
John Crispin
c7229b96b7 ralink: support change tx/rx ring size 
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44741
 2015-03-13 08:38:08 +00:00
John Crispin
2c94eef5df ralink: use random generate mac address instead of default one. 
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44740
 2015-03-13 08:38:01 +00:00
John Crispin
800da5a02e ralink: add wifi 5g dts info for cy-swr1100 
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 44739
 2015-03-13 08:37:45 +00:00
Felix Fietkau
7fc700dcca ath25: set myself as maintainer 
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44737
 2015-03-13 03:02:34 +00:00
Felix Fietkau
1850e0f0a7 Rename 'atheros' target to 'ath25' 
Rename 'atheros' target to more precise 'ath25'.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44736
 2015-03-13 03:02:28 +00:00
Felix Fietkau
558a452e1a atheros: remove odd board check during image build 
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44735
 2015-03-13 03:02:21 +00:00
Felix Fietkau
cfbaa00914 atheros: remove linux 3.14 
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44734
 2015-03-13 03:02:17 +00:00
Felix Fietkau
99104c3179 atheros: switch to 3.18 
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44733
 2015-03-13 03:02:12 +00:00
Felix Fietkau
ed8cdc3f8d atheros: v3.18: renumber backported patches 
Move first 3 patches to 0xx numbers range to denote that this is
backported code and they should be removed when we update
kernel to version >= 3.19

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44732
 2015-03-13 03:02:08 +00:00
Felix Fietkau
dae90fc130 atheros: v3.18: non-functional cleanup 
To finally sync code with upsream cleanup registers headers, and update
several comments and kernel config symbols descriptions. No functional
changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44731
 2015-03-13 03:02:00 +00:00
Felix Fietkau
7a46e008fb atheros: v3.18: cleanup includes 
Remove odd and add missed includes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44730
 2015-03-13 03:01:50 +00:00
Felix Fietkau
1b5b20e51e atheros: v3.18: rearrange code between patches 
Cleanup board patch by moving code to specific patches, and factor out
leds to separate patch. No functional changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44729
 2015-03-13 03:01:42 +00:00
Felix Fietkau
6d29a8bc64 atheros: v3.18: move GPIO patches behind PCI 
Move GPIO patches behind PCI patch, since they are not yet merged
upstream.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44728
 2015-03-13 03:01:37 +00:00
Felix Fietkau
eb370470d8 atheros: v3.18: switch to IRQ domain 
Rework MISC and PCI IRQ controllers code to use IRQ domains and bitops.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44727
 2015-03-13 03:01:31 +00:00
Felix Fietkau
4a3bd49cf1 atheros: v3.18: update register names 
Make register names more consistent, mostly add appropriate prefix
(AR5312_ or AR2315_) or _BASE suffix. Also add macro to simplify mask
and shift operation.

No functional changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44726
 2015-03-13 03:01:21 +00:00
Felix Fietkau
9ceee12a49 atheros: v3.18: remap flash for boardconfig parsing 
Rework boardconfig handling code to honestly remap flash memory region.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44725
 2015-03-13 03:01:17 +00:00
Felix Fietkau
6b041d0b1d atheros: v3.18: make registers headers local 
There are no external users (last one was PCI driver) for these headers,
so move them to arch directory. Few macroses from ar231x.h header moved
to devices.h and file was removed.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44724
 2015-03-13 03:01:11 +00:00
Felix Fietkau
892ef42a77 atheros: v3.18: remap main SoC MMR memory 
Honestly remap main SoC MMR mem and use accessor functions to
interact with registers. Now registers defined relatively to base
address (e.g. SDRAM controller base address).

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44723
 2015-03-13 03:01:04 +00:00
Felix Fietkau
cd4462326c atheros: v3.18: cleanup register headers 
AFAIK, no one AR2315+ chip (AR2315, AR2316, AR2317, AR2318) does not
contain IR block, so remove IR registers definitions. Also remove few
unused macroses.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44722
 2015-03-13 03:00:59 +00:00
Felix Fietkau
99377012d4 atheros: v3.18: pass PCI IRQ and I/O mem via resources 
Pass PCI IRQ and I/O memory ranges via platform device resources, this
change makes PCI controller driver independed from arch headers, so
also remove few includes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44721
 2015-03-13 03:00:51 +00:00
Felix Fietkau
6ba3363290 atheros: v3.18: remap PCI controller MMR memory 
Honestly remap PCI controller MMR and use accessor functions to interact
with registers.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44720
 2015-03-13 03:00:43 +00:00
Felix Fietkau
862a89b8f7 atheros: v3.18: add context container for PCI driver 
Add container and place all context specific variables and structure to
it.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44719
 2015-03-13 03:00:19 +00:00
Felix Fietkau
6d7e75fd99 atheros: v3.18: move PCI enable code to arch 
Move PCI host interface enable code to arch, since it touches generic
SoC registers outside the PCI MMR region.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44718
 2015-03-13 03:00:06 +00:00
Felix Fietkau
26136ce9ae atheros: v3.18: rearrange PCI regs definitions 
Move PCI controller configuration registers from generic header to
driver source. No functional changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44717
 2015-03-13 02:59:54 +00:00
Felix Fietkau
2c463148d1 atheros: v3.18: relocate PCI host DMA base definition 
Put AR2315_PCI_HOST_SDRAM_BASEADDR macro to DMA header, since this is
arbitrary value and not some hw specific constant. Also this relocation
decouples dma from HW specific header.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44716
 2015-03-13 02:59:43 +00:00
Felix Fietkau
f458d11655 atheros: v3.18: rework early initialization 
Do not use prom_init() callback, do memory initialization in
plat_mem_setup() callback and move serial port configuration to
arch_initcall stage.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44715
 2015-03-13 02:59:27 +00:00
Felix Fietkau
cdabe30755 atheros: v3.18: rearrange interrupt handling functions 
No functional changes, just change functions order in source file.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44714
 2015-03-13 02:59:19 +00:00
Felix Fietkau
2f1ff48ea3 atheros: v3.18: change calls logic 
Check SoC family (AR5312+ or AR2315+) before call instead of checking it
inside the called function. Also convert ar{5312,2315}_init_device()
function to void, since they both return zero and nobody care about
return value.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44713
 2015-03-13 02:59:04 +00:00
Felix Fietkau
8a98d187d5 atheros: v3.18: update names and declarations 
Sync functions, variables and enums names with upstream. Mostly replace
'ar231x_' prefix by 'ath25_'.

No functional changes, except few 'int' -> 'unsigned' changes.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44712
 2015-03-13 02:58:58 +00:00