KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23247 commits 3 branches 0 tags 154 MiB
Commit graph

9679 commits

Author SHA1 Message Date
Gabor Juhos
94806a13af ar71xx: use switchX names in network configuration 
Accessing the AR8xxx switches via the name of the
attached ethernet device is not possible since
r35560. Change the uci-defaults script to use
switchX names in switch configurations.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35561
 2013-02-11 16:54:52 +00:00
Gabor Juhos
9c86d268eb generic: ar8216: don't use ethernet device name in register_switch 
The switches are accessed via an MDIO bus. Set the alias
to the name of the MDIO bus, and show that in the message
along with the name of the switch switch device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35560
 2013-02-11 16:11:31 +00:00
Gabor Juhos
3f3eba88f6 generic: ar8216: reuse the private data from ar8216_probe 
The private data of the switch is already
allocated in ar8216_priv, assign that to
each PHY on the same MDIO bus. Also remove
the redundant code from ar8216_config_init.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35559
 2013-02-11 16:11:30 +00:00
Gabor Juhos
1afb759b35 generic: ar8216: use phydev instead of pdev everywhere 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35555
 2013-02-11 13:25:43 +00:00
Gabor Juhos
0b1fe07e8e generic: ar8216: use pr_* macros for kernel messages 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35554
 2013-02-11 13:14:00 +00:00
Gabor Juhos
eea297884e generic: ar8216: fix PHY features setup 
Sujith says:

This commit breaks the WAN port on my AP96 - DHCP fails.
Reverting it fixes the issue.

  commit b67cc3a0cdd02973610d4d5a63226d1c44841e94
  Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
  Date:   Fri Feb 8 09:13:18 2013 +0000

    generic: ar8216: simplify phy features setup

    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

    git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73

This change restores the previous behaviour and moves
the code into the ar8216_probe function.

Reported-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>

SVN-Revision: 35549
 2013-02-11 10:05:35 +00:00
Gabor Juhos
617076c613 generic: ar8216: add ar8xxx_probe_switch helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35547
 2013-02-10 19:02:01 +00:00
Gabor Juhos
98b13e39ac generic: ar8216: rename ar8xxx_mib_cleanup to ar8xxx_mib_stop 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35546
 2013-02-10 18:42:08 +00:00
Gabor Juhos
f97170a720 generic: ar8216: free mib counters from ar8xxx_free 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35545
 2013-02-10 18:42:07 +00:00
Gabor Juhos
7924e517af generic: ar8216: add ar8xxx_free helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35544
 2013-02-10 18:42:05 +00:00
Gabor Juhos
77b3c551c4 generic: ar8216: add ar8xxx_create{,mii} helpers 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35543
 2013-02-10 18:42:04 +00:00
Gabor Juhos
5f70b1db2a generic: ar8216: remove redundant phy address check 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35542
 2013-02-10 18:38:12 +00:00
Gabor Juhos
14fd37258b generic: ar8216: only set phy_ptr if packet mangling is used 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35541
 2013-02-10 18:38:10 +00:00
Gabor Juhos
393163b098 generic: ar8216: add defines for the AR8316 POSTRIP register 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35539
 2013-02-10 13:18:48 +00:00
Gabor Juhos
5ed480598d generic: ar8216: don't probe the chip multiple times 
It is only needed when the private data is allocated.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35538
 2013-02-10 13:05:15 +00:00
Gabor Juhos
774da6c7a4 generic: ar8216: add sanity check to ar8216_probe 
Verify that the mdio bus has PHY devices with
a supported PHY ID at address 0-4.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35537
 2013-02-10 13:05:14 +00:00
Gabor Juhos
4720c75cf7 generic: ar8216: skip probe on unused PHY addresses 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35536
 2013-02-10 13:05:12 +00:00
Jonas Gorski
f07a33afc2 ar71xx: register the micro sd card reader on RB493G 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35535
 2013-02-10 12:31:38 +00:00
Jonas Gorski
eedc3554fe generic: b53: fix reverted error check in probe 
b53_switch_detect returns value returned by b53_read8, which is 0 for
success. So fail (and return error) only if b53_switch_detect returned
something else than 0. This fixes supported and advertising being zeros
for MDIO access.

Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 35534
 2013-02-10 12:31:36 +00:00
Jonas Gorski
200359a520 bcm63xx: handle huawei nvram layout 
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35533
 2013-02-10 12:31:31 +00:00
Gabor Juhos
de123c4409 generic: ar8216: move sleep out of the loop 
It is enough to sleep once after ANEG is enabled on
all PHYs. This reduces boot time on boards with
AR8316 switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35532
 2013-02-09 13:26:04 +00:00
Gabor Juhos
6ff973bdda ar71xx: Routerboard 751 Mac Address Offset Fix 
We utilize many Routerboard 751's and discovered that our latest batch
of RB751's would not initialize the wireless radio. We have determined
Mikrotik has changed where the mac address was located inside hardconfig.
As such we utilize "routerboot_find_tag" to find the location of the mac
address. We should remove "RB751_MAC_ADDRESS_OFFSET" as it is ambiguous
by machine manufacturing date. The newer batch of RB751's that we received
had a RB751_MAC_ADDRESS_OFFSET 0x10.

Signed-off-by: Davey Hutchison <dhutchison@bluemesh.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35519
 2013-02-08 09:34:53 +00:00
Gabor Juhos
aa04441904 generic: ar8216: simplify phy features setup 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35518
 2013-02-08 09:13:18 +00:00
Gabor Juhos
9c1f95a416 generic: ar8216: don't use mdio bus specific functions in ar8216_id_chip 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35517
 2013-02-08 09:13:14 +00:00
Gabor Juhos
5393efc0c7 generic: ar8216: use inline function to convert swdev to ar8216 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35514
 2013-02-07 15:18:36 +00:00
Gabor Juhos
b87a1c757d generic: ar8216: add mii_bus field to struct ar8216_priv 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35513
 2013-02-07 15:18:35 +00:00
Gabor Juhos
c130a3feac generic: mvswitch: add detach callback 
Use the detach callback to disable packet mangling
to avoid possible NULL pointer dereference.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35512
 2013-02-07 15:18:34 +00:00
Gabor Juhos
4be8c22e74 generic: ar8216: add detach callback 
The current code uses the 'remove' callback to disable
packet mangle on the underlying ethernet device.
However the attached_dev is always NULL when the
'remove' callback is called by phylib, and this causes
NULL pointer dereference, like this:

  [  475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac
  [  475.310000] Oops[#1]:
  [  475.310000] Cpu 0
  [  475.310000] $ 0   : 00000000 00000000 00000000 00000001
  [  475.310000] $ 4   : 828dde00 00000005 828dde08 ffffffff
  [  475.310000] $ 8   : 00380081 00380081 82902a40 00000001
  [  475.310000] $12   : 00000037 00370081 00000001 00000000
  [  475.310000] $16   : 82865000 828dde08 828dde00 00000001
  [  475.310000] $20   : 00000080 00460000 00000002 77151448
  [  475.310000] $24   : 00000000 801abfd4
  [  475.310000] $28   : 82cc2000 82cc3d58 0053c3c4 801c7eac
  [  475.310000] Hi    : 00000007
  [  475.310000] Lo    : 00000004
  [  475.310000] epc   : 801cdcf0 ar8216_remove+0x1c/0x94
  [  475.310000]     Tainted: G           O
  [  475.310000] ra    : 801c7eac phy_remove+0x4c/0x6c
  [  475.310000] Status: 1000cc03    KERNEL EXL IE
  [  475.310000] Cause : 00800008
  [  475.310000] BadVA : 000000f0
  [  475.310000] PrId  : 00019750 (MIPS 74Kc)
  [  475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft
  p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co
  nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu
  dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80
  211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  [  475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440)
  [  475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8
          82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94
          00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000
          83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000
          00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000
          ...
  [  475.310000] Call Trace:
  [  475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94
  [  475.310000] [<801c7eac>] phy_remove+0x4c/0x6c
  [  475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0
  [  475.310000] [<801ad7fc>] device_release_driver+0x28/0x40
  [  475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c
  [  475.310000] [<801aac44>] device_del+0x110/0x170
  [  475.310000] [<801aacb8>] device_unregister+0x14/0x28
  [  475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70
  [  475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx]
  [  475.310000]
  [  475.310000]
  Code: 1200001c  8c82017c  ac800128 <8c4500f0> 3c03ffdf  3463ffff 00a31824  ac4300f0  ac4000e0

Add a detach callback and disable packet mangling in
that to fix the problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35511
 2013-02-07 15:18:32 +00:00
Gabor Juhos
fe61fc2d7d generic: add detach callback to struct phy_driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35510
 2013-02-07 15:18:24 +00:00
Hauke Mehrtens
07db9e8eab brcm47xx: fix name of kmod-ocf-ubsec-ssb 
This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb.

Thank you Manuel Munz <freifunk@somakoma.de> for the patch.

SVN-Revision: 35509
 2013-02-06 22:51:25 +00:00
Hauke Mehrtens
a52832164b brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up 
This fixes #12927.

SVN-Revision: 35507
 2013-02-06 14:57:00 +00:00
Florian Fainelli
6b0da6db6a remove support for 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35506
 2013-02-05 22:36:54 +00:00
Florian Fainelli
e22926a46b make default version 3.7.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35505
 2013-02-05 22:36:50 +00:00
Florian Fainelli
57803a98ec remove superfluous calls to /lib/brcm63xx.sh 
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35504
 2013-02-05 22:25:30 +00:00
Florian Fainelli
84d306d23c remove references to the old switch driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35503
 2013-02-05 22:25:19 +00:00
Mirko Vogt
ec19a23bae fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W 
SVN-Revision: 35501
 2013-02-05 14:57:43 +00:00
Mirko Vogt
f460388ce2 add support for board named RTA770W 
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
 2013-02-05 14:57:40 +00:00
Gabor Juhos
395d0bdc1f generic: ar8216: clear driver specific data pointer in phy_device 
This is needed to avoid a NULL pointer dereference:

  [   19.525270] Unable to handle kernel paging request for data at address 0x00000018
  [   19.532750] Faulting instruction address: 0xc016e104
  [   19.537714] Oops: Kernel access of bad area, sig: 11 [#1]
  [   19.543102] P1010 RDB
  [   19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d
  [   19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000
  [   19.595681] REGS: c4bc3c10 TRAP: 0300   Tainted: G        W  O (3.7.6)
  [   19.602284] MSR: 00029000 <CE,EE,ME>  CR: 82002022  XER: 20000000
  [   19.608381] DEAR: 00000018, ESR: 00000000
  [   19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000
  GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec
  GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514
  GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914
  GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000
  [   19.646352] NIP [c016e104] register_switch+0x98/0x2d0
  [   19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.656697] Call Trace:
  [   19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable)
  [   19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c
  [   19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8
  [   19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68
  [   19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c
  [   19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8
  [   19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120
  [   19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c
  [   19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60
  [   19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690
  [   19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc
  [   19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294
  [   19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728
  [   19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70
  [   19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c
  [   19.748646] --- Exception: c01 at 0x48091b34
  [   19.748646]     LR = 0x480e4b64
  [   19.756033] Instruction dump:
  [   19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040
  [   19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35497
 2013-02-05 08:39:26 +00:00
Gabor Juhos
2e7f38c243 generic: ar8216: unregister switch on error path 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35496
 2013-02-05 08:39:24 +00:00
Gabor Juhos
1bb8ad6050 mpc85xx: enable GPIO sysfs interface 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35495
 2013-02-05 07:48:02 +00:00
Gabor Juhos
6ba265a573 mpc85xx: enable Freescale eSPI driver and m25p80 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35494
 2013-02-05 07:48:01 +00:00
Gabor Juhos
eea43ffd33 mpc85xx: sync kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35493
 2013-02-05 07:47:59 +00:00
Hauke Mehrtens
8ba8225686 brcm47xx: fix detection of Asus RT-N16 
This fixes #12936.

SVN-Revision: 35492
 2013-02-04 22:49:05 +00:00
Hauke Mehrtens
a1e3c0ca46 Add Failsafe support for Linksys E3000V1 / WRT610NV2 
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm.  The list of devices will need to
be expanded.  Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists?  Could
a similar method be used in "/etc/init.d/netconfig"?

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35491
 2013-02-04 22:40:57 +00:00
Hauke Mehrtens
c2198aba32 brcm47xx: Fix switch config on 4716/53115 devices 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 35490
 2013-02-04 22:38:37 +00:00
Gabor Juhos
b97aee1ee8 coldfire: R.I.P. 
The target still uses 2.6.38. The support of that
kernel version has been removed ~9 months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35489
 2013-02-04 15:23:10 +00:00
Gabor Juhos
c41002971a leon: R.I.P. 
It is broken since ~9 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35488
 2013-02-04 15:23:08 +00:00
Gabor Juhos
539e0b5b84 imx21: R.I.P. 
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35487
 2013-02-04 15:23:07 +00:00
Gabor Juhos
e7dee4ea87 octeon: R.I.P. 
It is broken since ~8 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35486
 2013-02-04 15:23:05 +00:00
Gabor Juhos
da44b916cf omap35xx: R.I.P. 
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35485
 2013-02-04 15:23:04 +00:00
Jonas Gorski
8506964e6d bcm63xx: add support for linux 3.8 
Based on 3.8-rc6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35482
 2013-02-04 10:19:55 +00:00
Jonas Gorski
3b4fced67d bcm63xx: add support for linux 3.7 
Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
 2013-02-04 10:19:50 +00:00
Jonas Gorski
0e9365b346 kernel: generic: update the ehci overcurrent patch to upstream submission 
Adds support for setting this in the generic platform driver's platform_data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35480
 2013-02-04 10:19:37 +00:00
Jonas Gorski
e0fe5596f8 kernel: generic: add back the patch exporting bcm63xx tag header 
It went missing when adding linux 3.7 support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35479
 2013-02-04 10:19:35 +00:00
Jonas Gorski
34ad8f4e75 kernel: generic: update to 3.8-rc6 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35478
 2013-02-04 10:19:28 +00:00
Jonas Gorski
a15e1a950d bcm63xx: refresh 3.6 patches 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35477
 2013-02-04 10:19:24 +00:00
Gabor Juhos
08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos
b1168e70d3 ar71xx: use backported PCI_MEM_SIZE patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35470
 2013-02-02 18:17:58 +00:00
Gabor Juhos
b9b341f05a ar71xx: rename ar933x_uart patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35469
 2013-02-02 18:17:53 +00:00
Gabor Juhos
9ed81a91f3 ramips: build image for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
 2013-02-02 17:21:06 +00:00
Gabor Juhos
813aec6796 ramips: add user-space support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
 2013-02-02 17:21:05 +00:00
Gabor Juhos
d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
 2013-02-02 17:21:01 +00:00
Gabor Juhos
b99b2ff553 ramips: add userspace support for the Edimax BR-6425 
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
 2013-02-02 17:01:50 +00:00
Gabor Juhos
0a42e38bad ramips: add kernel support for the Edimax BR-6425 board 
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
 2013-02-02 17:01:47 +00:00
Gabor Juhos
4ac6eb480b x86/kvm_guest: add support for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35460
 2013-02-02 15:31:57 +00:00
Gabor Juhos
c340ef2ae2 x86: add missing symbols for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35459
 2013-02-02 15:31:55 +00:00
Gabor Juhos
0f46f47512 x86/kvm_guest: add missing symbols for 3.3 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35458
 2013-02-02 15:31:54 +00:00
Gabor Juhos
ab3e3cacaa alix2: convert from kernel version 3.3.8 to 3.7.5 
[juhosg: use 3.7.5 instead of 3.7.3]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35457
 2013-02-02 15:31:52 +00:00
Gabor Juhos
4c223d7d4f generic: convert crypto-ocf from kernel_thread to kthread 
recent kernels have finally stopped exporting kernel_thread, since a
deprecation circa 2006.  This patch attempts to convert to the newer
kernel kthread API, particularly in random.c

[juhosg: remove randomproc variable, it is not required after the patch]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35456
 2013-02-02 15:31:44 +00:00
Gabor Juhos
7c87d28054 ar71xx: fixes whitespaces for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
 2013-02-02 15:02:19 +00:00
Gabor Juhos
ecf55822bb mpc85xx: nuke 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35453
 2013-02-02 10:05:43 +00:00
Gabor Juhos
242859abae mpc85xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35452
 2013-02-02 10:05:40 +00:00
Gabor Juhos
cde71c305c mpc85xx: add support for linux 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35451
 2013-02-02 10:05:37 +00:00
Gabor Juhos
bbfd8cbf94 linux/3.7: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35450
 2013-02-02 10:05:08 +00:00
Gabor Juhos
9a438b2271 ar71xx: build images for the TP-LINK TL-WR743ND v2 
AR9331 based, these same as 741v4

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35449
 2013-02-02 10:01:15 +00:00
Gabor Juhos
668e529220 generic: fix gc_sections patch 
Due to the patch, essential '.data..*' sections are merged
into the '.data' section:

  --- vmlinux.good.sect   2013-02-01 23:49:16.000000000 +0100
  +++ vmlinux.bad.sect    2013-02-01 23:49:02.000000000 +0100
  @@ -1,5 +1,5 @@

  -vmlinux.good:     file format elf32-powerpc
  +vmlinux.bad:     file format elf32-powerpc

   Sections:
   Idx Name          Size      VMA       LMA       File off  Algn
  @@ -53,43 +53,35 @@
                     CONTENTS, ALLOC, LOAD, READONLY, DATA
    24 .machine.desc 00000460  c04e1000  004e1000  004f1000  2**2
                     CONTENTS, ALLOC, LOAD, DATA
  - 25 .data         0000f6a0  c04e2000  004e2000  004f2000  2**12
  + 25 .data         0001635c  c04e2000  004e2000  004f2000  2**12
                     CONTENTS, ALLOC, LOAD, DATA
  - 26 .data..init_task 00002000  c04f2000  004f2000  00502000  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 27 .data..page_aligned 00002000  c04f4000  004f4000  00504000  2**12
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 28 .data..cacheline_aligned 00000c00  c04f6000  004f6000  00506000
    2**5
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 29 .data..read_mostly 000015e0  c04f6c00  004f6c00  00506c00  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 30 .sbss         000002e0  c04f9000  004f9000  005081e0  2**3
  + 26 .sbss         000002e0  c04fa000  004fa000  0050835c  2**3
  <...>

This causes boot hang on powerpc. Modify the patch to
ensure that the kernel specific '.data..*' sections
remain separate.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35447
 2013-02-02 09:30:47 +00:00
Gabor Juhos
31af0dc186 ar71xx: fix mac address calculation on the OpenMesh MR600 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35446
 2013-02-02 08:47:41 +00:00
Gabor Juhos
257b21f2d4 mpc85xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35445
 2013-02-01 17:49:56 +00:00
Gabor Juhos
cf2faab4ae mpc85xx: switch to 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35444
 2013-02-01 17:49:54 +00:00
Gabor Juhos
56849d146c mpc85xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35443
 2013-02-01 17:49:53 +00:00
Gabor Juhos
630fffbead mpc85xx: fix dts name for P1010RDB 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35442
 2013-02-01 17:49:52 +00:00
Gabor Juhos
a2529eab2b linux/3.6: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35441
 2013-02-01 17:30:18 +00:00
Gabor Juhos
fb936218a1 linux/3.6: refresh patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35440
 2013-02-01 17:30:15 +00:00
Gabor Juhos
495820f7a0 mpc85xx: remove broken flag 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35439
 2013-02-01 17:28:54 +00:00
Gabor Juhos
4cb7e749ab mpc85xx: build fdt file for the PB1010RDB board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35438
 2013-02-01 17:28:51 +00:00
Gabor Juhos
20ca35570e mpc85xx: enable PB1010RDB support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35437
 2013-02-01 17:28:49 +00:00
Gabor Juhos
21b15ddda5 mpc85xx: image: fix building of multiple dtb files 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35436
 2013-02-01 17:28:47 +00:00
Gabor Juhos
d158dfc607 linux/3.3: disable crashlog on PPC 
It causes NULL pointer dereference:

[    0.638235] __ioremap(): phys addr 0x7f00000 is RAM lr c025d61c
[    0.644090] Unable to handle kernel paging request for data at address 0x00000000
[    0.651533] Faulting instruction address: 0xc025d620
[    0.656483] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.661856] P1010 RDB
[    0.664113] Modules linked in:
[    0.667152] NIP: c025d620 LR: c025d61c CTR: c000dc38
[    0.672101] REGS: c7831ef0 TRAP: 0300   Not tainted  (3.3.8)
[    0.677740] MSR: 00029000 <CE,EE,ME>  CR: 42022082  XER: 20000000
[    0.683817] DEAR: 00000000, ESR: 00000000
[    0.687811] TASK = c782c000[1] 'swapper' THREAD: c7830000
[    0.693017] GPR00: a1ee0000 c7831fa0 c782c000 00000000 0000214c ffffffff c7831ea6 0001ffff
[    0.701350] GPR08: c03697cc c035fba0 c03697cc c0360000 42022022 00000000 00000000 00000000
[    0.709682] GPR16: c0000a00 00000014 3fffffff 00ffa000 00000015 07fc42bc c0360000 00000000
[    0.718015] GPR24: 00000000 00000000 00001680 c0360000 00000000 c025d5e8 c0390000 c038b824
[    0.726535] NIP [c025d620] crashlog_init_fs+0x38/0xd8
[    0.731560] LR [c025d61c] crashlog_init_fs+0x34/0xd8
[    0.736503] Call Trace:
[    0.738939] [c7831fa0] [c025d61c] crashlog_init_fs+0x34/0xd8 (unreliable)
[    0.745712] [c7831fb0] [c0001e98] do_one_initcall+0xd4/0x198
[    0.751357] [c7831fe0] [c02537f4] kernel_init+0x9c/0x120
[    0.756647] [c7831ff0] [c000c2dc] kernel_thread+0x4c/0x68
[    0.762022] Instruction dump:
[    0.764975] 3860fff4 bfc10008 3fc0c039 90010014 3bfeb824 801f0004 2f800000 41be00a0
[    0.772699] 7c030378 38804000 4bdb38cd 3c00a1ee <81630000> 6000dead 7c691b78 907eb824

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35435
 2013-02-01 17:28:44 +00:00
Gabor Juhos
fb2e2a56d7 refresh kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35434
 2013-02-01 17:28:40 +00:00
Gabor Juhos
6805275fdc ar71xx: sysupgrade - fix OpenMesh MR600 total flash size 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35433
 2013-02-01 15:50:54 +00:00
Gabor Juhos
979676ffcc ar71xx: add sysupgrade support for OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35430
 2013-02-01 15:50:47 +00:00
Gabor Juhos
2af995ba1d ar71xx: add user-space support for OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35429
 2013-02-01 15:50:45 +00:00
Gabor Juhos
8837d3a49b ar71xx: add kernel support for the OpenMesh MR600v2 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35428
 2013-02-01 15:50:42 +00:00
Gabor Juhos
150bb9d0b1 ar71xx: remove unused OpenMesh MR600 led definitions 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35427
 2013-02-01 15:50:39 +00:00
Gabor Juhos
fe3db74276 ar71xx: remove unused OpenMesh MR6000 platform code 
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35426
 2013-02-01 15:50:37 +00:00
Gabor Juhos
492cbcdd6b ar71xx: build image for the TL-WDR3500 board 
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35425
 2013-02-01 15:50:34 +00:00
Gabor Juhos
119dc460a3 ar71xx: add user-space support for TL-WDR3500 board 
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35424
 2013-02-01 15:50:32 +00:00
Gabor Juhos
5bd02ca895 ar71xx: add kernel support for the TL-WDR3500 board 
WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35423
 2013-02-01 15:50:29 +00:00
Jonas Gorski
ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35407
 2013-01-30 00:19:21 +00:00
Gabor Juhos
f7ff677169 ar71xx: add profile and build image for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35403
 2013-01-29 22:50:57 +00:00