Commit graph

42219 commits

Author SHA1 Message Date
Chuanhong Guo
2d5fee248c ath79: alphabetical order image/generic.mk
Move the wzr-hp-g450h in image/generic.mk to keep alphabetical order.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Chuanhong Guo
8288af1e18 ath79: rename dts/image using manufacturer_board scheme
This helps getting rid of SUPPORTED_DEVICES which can be
auto-generated in image/Makefile.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Chuanhong Guo
2da431e583 ath79: remove quotes for boardname in scripts
Quotes are not required in case statements.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Chuanhong Guo
f9065e44a6 ath79: put all devices in alphabetical order in scripts
And remove specifying lan interfaces as eth1.1 because this is
handled by ucidef_add_switch.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Chuanhong Guo
3804134369 ath79: fix support for TL-MR3020 v1
Change lan and it's LED to eth0
It's broken since c7c807cb8c
where I changed the dts but forgot to change default configurations.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Chuanhong Guo
690c55e8cc ath79: fix support for TL-WR740N/WR741N v4
1. Swap eth0/eth1
 Both devices are using AR9331, the builtin switch on AR9331 is
 connected to gmac1 and gmac1 is named as eth1 in ath79.
 PS: gmac1 is eth0 and gmac0 is eth1 in ar71xx because of the
 reversed initialization order.
2. Fix the incorrect compatible string in dts

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Chuanhong Guo
115e993adc ath79: remove useless phy-handle nodes
phy-handle is used to poll link status. They are useless when
we need fixed-link on these interfaces.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-08-06 07:31:54 +02:00
Christian Lamparter
3fce12568a kernel: modules: fix kmod-regmap redux
Jonas Gorski commented on the previous patch:
|This is actually the wrong fix and papers over an issue in one of our
|local patches.
|
|We intentionally allow regmap to be built as a module, see
|
|/target/linux/generic/hack-4.14/259-regmap_dynamic.patch
|[...]
|[The regulator code] optionally supports regmap thanks to the stubs
|provided if regmap is disabled - which breaks if you compile regmap
|as a module.

In order to mitigate this issue, this patch reverts the previous patch
and replaces the existing IS_ENABLED(CONFIG_REGMAP) with
IS_REACHABLE(CONFIG_REGMAP). This solves this particular issue as the
regulator code will now automatically fallback to the regmap stubs in
case the kmod-regmap module is enabled, but nothing else sets
CONFIG_REGMAP=y.

Note: There's still a potential issue that this patch doesn't solve:
If someone ever wants to make a OpenWrt kernel package for a
regulator module that requires the REGMAP feature for a target that
doesn't set CONFIG_REGMAP=y but has CONFIG_REGULATOR=y, the resulting
kmod-regulator-xyz package will not work on the target.
Luckily, there aren't any in-tree OpenWrt kernel module packages for
regulators at the moment. On the bright side: regmap is a critical
part nowadays and all new and upcoming architectures require it by
default. This will likely only ever be a problem for legacy targets
and devices that cannot afford to enable REGMAP.

Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: John Crispin <john@phrozen.org>
Fixes: d00913d121 ("kernel: modules: fix kmod-regmap")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-08-06 07:17:12 +02:00
Chen Minqiang
f6d81e2fa1 mt7620: gsw: make IntPHY and ExtPHY share mdio addr 4 possible
To share mdio addr for IntPHY and ExtPHY,
as described in the documentation (MT7620_ProgrammingGuide.pdf).
(refer: http://download.villagetelco.org/hardware/MT7620/MT7620_ProgrammingGuide.pdf)

when port4 setup to work as gmac mode, dts like:

&gsw {
    mediatek,port4 = "gmac";
};

we should set SYSCFG1.GE2_MODE==0x0 (RGMII).
but SYSCFG1.GE2_MODE may have been set to 3(RJ-45) by uboot/default
so we need to re-set it to 0x0

before this changes:
gsw: 4FE + 2GE may not work correctly and MDIO addr 4 cannot be used by ExtPHY

after this changes:
gsw: 4FE + 2GE works and MDIO addr 4 can be used by ExtPHY

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2018-08-06 07:12:31 +02:00
Daniel Gimpelevich
379fe50672 ramips: fix gigabit switch PHY access on MDIO
When PHY's are defined on the MDIO bus in the DTS, gigabit support was
being masked out for no apparent reason, pegging all such ports to 10/100.
If gigabit support must be disabled for some reason, there should be a
"max-speed" property in the DTS.

Reported-by: James McKenzie <openwrt@madingley.org>
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-08-06 07:05:37 +02:00
Daniel Gimpelevich
5a6229a93d ramips: remove superfluous & confusing DT binding
Mediatek has a reference platform that pairs an MT7620A with an MT7530W,
where the latter responds on MDIO address 0x1f while both chips respond on
0x0 to 0x4. The driver special-cases this arrangement to make sure it's
talking to the right chip, but two different ways in two different places.
This patch consolidates the detection without the current requirement of
both tests to be separately satisfied in the DTS.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-08-06 07:05:37 +02:00
Daniel Gimpelevich
f72fa883b3 ramips: add support for Edimax BR-6478AC v2
Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie.
Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated.

Specification:
- System-On-Chip: MT7620A
- CPU/Speed: 580 MHz
- Flash-Chip: Macronix MX25L6405D
- Flash size: 8192 KiB
- RAM: 64 MiB
- Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn
- Wireless No2: On-board chip: MT7612E 5GHz 802.11ac
- Switch: Mediatek MT7530W Gigabit Switch
- USB: Yes 1 x 2.0

Installation:
1. Download sysupgrade.bin
2. Open vendor web interface
3. Choose to upgrade firmware
4. After reboot connect via ethernet at 192.168.1.1

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-08-06 07:05:37 +02:00
Paul Spooren
ad5c2897ec imagebuilder: manifest function show stderr
This really simplifies debugging, if a package is not found or a feed is
not reachable, a proper stderr is printed. Currently it would only say
`_call_manifest` failed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2018-08-06 06:54:42 +02:00
Andreas Ziegler
72489ebeb6 base-files: sysupgrade: abort if config backup fails
Sysupgrade shouldn't proceed, if the backup of the configuration
fails because tar (or gzip) exit with a non-zero code.

Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
2018-08-06 06:51:44 +02:00
Jo-Philipp Wich
a692e4e3de scripts: time.pl: avoid hard Time::HiRes dependency
Use Time::HiRes when available and fallback to raw syscall interface
when not. If that fails too, simply report 0, 0 as real time.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-05 12:24:01 +02:00
Jo-Philipp Wich
d3ddf6631e build: remove GNU time dependency
Replace the GNU time program invocation with a simple Perl script reporting
the timing values. Since we require Perl anyway for the build system, we can
as well use that instead of requiring a random GNU utility rarely installed
by default.

Fixes: ff6e62b288 ("build: log time taken by each packages/steps")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-05 00:06:27 +02:00
Alex Maclean
6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00
Mathias Kresin
6dd94c2781 ramips: unify partition node names in dts files
Use partition@ as name for all partition nodes. Add a label where
necessary.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
bfd65fc4ab ramips: fix whitespace and comment issues in dts
Fix space vs. tabs issue and trainling whitespaces. Use C style
comments or drop the comments if they explain what is already to see in
the devicetree parameters.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
53624c1702 ramips: fix dtc warnings
Fix individual boards dtc warnings or obvious mistakes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
6384e0d16a ramips: fix hnat dtc warning
The hardware NAT node has the same reg/unit as the ethernet node. One
of them need to be a child of the other.

Make the hardware NAT node a child of the ethernet node since the it
"reference" the netdev in its properties.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
f9b8328d79 ramips: fix pci/pcie related dtc warnings
Add the ranges property to the PCI bridges where missing. Add the unit
address to PCI bridge where missing.

Rework the complete rt3883 pci node. Drop the PCI unit nodes from the
dtsi. They are not used by any dts file and should be rather in the dts
than in the SoC dtsi. Express the PCI-PCI bridge in a clean devicetree
syntax. The ralink,pci-slot isn't used by any driver, drop it. Move the
pci interrupt controller out of the pci node. It doesn't share the same
reg and therefore should be an independent/SoC child node.

Move the pci related rt3883 pinctrl setting to the dtsi instead of
defining the very same for each rt3883 board.

If the device_type property is used for PCI units, the unit is treated
as pci bridge which it isn't. Drop it for PCI units.

Reference pci-bridges or the pci node defined in the dtsi instead of
recreating the whole node hierarchy. It allows to change the referenced
node in the dtsi without the need to touch all dts.

Fix the PCI(e) wireless unit addresses. All our PCI(e) wireless chips
are the first device on the bus. The unit address has to be the bus
address instead of the PCI vendor/device id.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
d8e7a526a3 ramips: use ralink,nr-gpio instead of ralink,num-gpios
Since commit c1e7738988f5 ("checks: add gpio binding properties check")
dtc treats any *-gpios and *-gpio property as phandle at least during
checks. The only whitelisted property is nr-gpio.

Use ralink,nr-gpio in favour of ralink,num-gpios to get rid of false
positive warnings.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
1bad2b74ae ramips: fix cpu interrupt controller dtc warnings
The cpu interrupt controller doesn't have a reg property, hence we
can't use a unit address in the node name.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
b9dbf3f3c8 ramips: fix cpu related dtc warnings
We need a reg property if we are using a unit address.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
René van Dorst
0ae9396556 treewide: convert gpio-export to platform driver
Without this patch you will get an error "gpio-export probe deferral
not supported" when you try to export i2c expander gpio pins.

gpio-export is probed long before i2c-bus and i2c expander are created
and it doesn't retry it so none pins are exported.

Signed-off-by: René van Dorst <opensource@vdorst.com>
apply the change to all instances of the gpio exports patch
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Mathias Kresin
1d18a14a90 ath79: really fix TP-Link Archer C7 v2 MAC address
Revert 290c54473e ("ath79: fix TP-Link Archer C7 v2 wlan1 MAC address")
which obviously aims to have a distinct MAC address per interface.

Unfortunally it doesn't match what is used by the stock firmware and we
shouldn'z use MAC Adresses not reserverd for/assigned to a particular
board.

The correct MAC adress increments for this board are:

wlan0 (5GHz) : -1
wlan1 (2.4GHz) : 0
eth1 (LAN) : 0
eth0 (WAN) : 1

Fixes: FS#408

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00
Jason A. Donenfeld
68e2ebe64a wireguard: bump to 0.0.20180802
Changelog taken from the version announcement

> == Changes ==
>
>   * chacha20poly1305: selftest: split up test vector constants
>
>   The test vectors are encoded as long strings -- really long strings -- and
>   apparently RFC821 doesn't like lines longer than 998.
>   https://cr.yp.to/smtp/message.html
>
>   * queueing: keep reference to peer after setting atomic state bit
>
>   This fixes a regression introduced when preparing the LKML submission.
>
>   * allowedips: prevent double read in kref
>   * allowedips: avoid window of disappeared peer
>   * hashtables: document immediate zeroing semantics
>   * peer: ensure resources are freed when creation fails
>   * queueing: document double-adding and reference conditions
>   * queueing: ensure strictly ordered loads and stores
>   * cookie: returned keypair might disappear if rcu lock not held
>   * noise: free peer references on failure
>   * peer: ensure destruction doesn't race
>
>   Various fixes, as well as lots of code comment documentation, for a
>   small variety of the less obvious aspects of object lifecycles,
>   focused on correctness.
>
>   * allowedips: free root inside of RCU callback
>   * allowedips: use different macro names so as to avoid confusion
>
>   These incorporate two suggestions from LKML.
>
> This snapshot contains commits from: Jason A. Donenfeld and Jann Horn.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-08-04 04:04:34 +00:00
Jo-Philipp Wich
e44162ffca uclient: update to latest git HEAD
f2573da uclient-fetch: use package name pattern in message for missing SSL library
9fd8070 uclient-fetch: Check for nullpointer returned by uclient_get_url_filename
f41ff60 uclient-http: basic auth: Handle memory allocation failure
a73b23b uclient-http: auth digest: Handle multiple possible memory allocation failures
66fb58d uclient-http: Handle memory allocation failure
2ac991b uclient: Handle memory allocation failure for url
63beea4 uclient-http: Implement error handling for header-sending
eb850df uclient-utils: Handle memory allocation failure for url file name
ae1c656 uclient-http: Close ustream file handle only if allocated

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-03 23:50:29 +02:00
Koen Vandeputte
f960490fc8 kernel: bump 4.14 to 4.14.60
Refreshed all patches

Removed upstreamed patches:
- 500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch

Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-03 16:10:38 +02:00
Koen Vandeputte
4ec4dd2a11 kernel: bump 4.9 to 4.9.117
Refreshed all patches

Compile-tested on: ar71xx
Runtime-tested on: ar71xx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-03 16:10:38 +02:00
Jo-Philipp Wich
4bb8a678e0 sdk: include arch/arm/ Linux includes along with arch/arm64/ ones
The Linux headers on arm64 architectures contain references to common
arch/arm/ headers which were not bundled by the SDK so far.

Check if we're packing the SDK for an arm64 target and if we do, also
include arch/arm headers as well.

Fixes FS#1725.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-03 13:47:29 +02:00
Kevin Darbyshire-Bryant
13c66f8820 iproute2: cake: make gso/gro splitting configurable
This patch makes sch_cake's gso/gro splitting configurable
from userspace.

To disable breaking apart superpackets in sch_cake:

tc qdisc replace dev whatever root cake no-split-gso

to enable:

tc qdisc replace dev whatever root cake split-gso

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
[pulled from netdev list - no API/ABI change]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-08-02 22:00:19 +01:00
Kevin Darbyshire-Bryant
4f3c9a63b2 kmod-sched-cake: bump to 20180728 optional gso split
Follow upstream kernel patch that restores always splitting gso packets
by default whilst making the option configurable from (tc) userspace.

No ABI/API change

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-08-02 22:00:19 +01:00
Hannu Nyman
12fb4bb834 busybox: update to 1.29.2
* Update busybox to 1.29.2
* refresh default config
* remove upstreamed patches

Config refreshed with
  cd config/
  ../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/busybox-1.29.2
  cd ..
  ./convert_defaults.pl < ../../../build_dir/target-arm_cortex-a9+vfpv3_musl_eabi/busybox-1.29.2/.config > Config-defaults.in

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Tested-by: Hans Dedecker <dedeckeh@gmail.com>
2018-08-02 22:36:00 +02:00
Koen Vandeputte
457e6d5a27 iperf: bump to 2.0.12
Fixes the annoying 'feature' were TTL was set to "1" by default ..
Users had to specify -T manually to test outside the own network.

2.0.12 change set (as of June 25th 2018)

o Change the unicast TTL default value from 1 to the system default (to be compatable with previous versions.) Multicast still defaults to 1.
o adpative formatting bug fix: crash occurs when values exceed 1 Tera. Add support for Tera and Peta and eliminate the potential crash condition
o configure default compile to include isochronous support (use configure --disable-isochronous to remove support)
o replace 2.0.11's --vary-load option with a more general -b option to include <mean>,<stdev>, e.g. -b 100m,40m, which will pull from a log normal distribution every 0.1 seconds
o fixes for windows cross compile (using mingw32)
o compile flags of -fPIE for android
o configure --enable-checkprograms to compile ancillary binaries used to test things such as delay, isoch, pdf generation
o compile tests when trying to use 64b seq numbers on a 32b platform
o Fix GCC ver 8 warnings

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-02 15:03:21 +02:00
Jonas Gorski
2308b87204 brcm63xx: switch to 4.14
Kernel 4.14 support has been present for quite some time, so let's give
it wider testing.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-08-02 08:49:18 +02:00
Jonas Gorski
15cb65dad7 brcm63xx: drop b43 from devices with unsupported wifi
The internal wifi isn't supported, so drop b43 from devices that only
have it.

Fixes FS#1698
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-08-02 08:43:52 +02:00
Jonas Gorski
8cb8d70fea brcm63xx: copy SR102 support patch to 4.14 as well
It seems to have been missed when the patch was accepted.

Fixes: d591260407 ("brcm63xx: initial support for Sky SR102 router")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-08-02 08:43:52 +02:00
Jonas Gorski
bc1c706bb3 brcm63xx: drop bogus SPROM section from SR102
The integrated SoC wifi will likely never be supported, and if,
it will go through DT with the sprom contents there.

Fixes: d591260407 ("brcm63xx: initial support for Sky SR102 router")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-08-02 08:43:52 +02:00
Chen Minqiang
33bce21bb0 base-files: fix HOME_URL replace
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2018-08-02 07:54:40 +02:00
Andrew Cameron
bae927c551 ar71xx: add support for TP-LINK CPE510 V2.0
Adds Support for the TP-LINK CPE510 V2.0 by TP-Link.
The hardware is almost the same as the CPE510 V1.0
Follow the same processes as for the CPE510 V1.0

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2018-08-02 07:49:26 +02:00
Jo-Philipp Wich
b9bd3285c7 Revert "ar71xx: ag71xx: Prevent kernel oops for board def"
This reverts commit 7a3e133751.

This change reportedly breaks connectivity on some ar71xx devices, so
revert it for now.

Ref: https://github.com/openwrt/openwrt/pull/1217#issuecomment-409708087
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-01 22:34:22 +02:00
Jo-Philipp Wich
33dbe2c55d Revert "ar71xx: ag71xx: Add connect message: fixed phy"
This reverts commit 0b9f4e8808.

This change reportedly breaks connectivity on some ar71xx devices, so
revert it for now.

Ref: https://github.com/openwrt/openwrt/pull/1217#issuecomment-409708087
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-01 22:31:37 +02:00
Jo-Philipp Wich
9ebf596386 Revert "ar71xx: ag71xx_phy: Fix compilation for debug messages"
This reverts commit 2655fbe8ef.

The patch introduces syntax errors, revert it for now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-08-01 22:31:14 +02:00
Koen Vandeputte
a2a225517d gdb: bump to 8.1.1
GDB 8.1.1 brings the following fixes and enhancements over GDB 8.1:

 * PR gdb/22824 (misleading description of new rbreak Python function in GDB 8.1 NEWS file)
 * PR gdb/22849 (ctrl-c doesn't work in extended-remote)
 * PR gdb/22907 ([Regression] gdbserver doesn't work with filename-only binaries)
 * PR gdb/23028 (inconsistent disassemble of vcvtpd2dq)
 * PR gdb/23053 (Fix -D_GLIBCXX_DEBUG gdb-add-index regression)
 * PR gdb/23127 ([AArch64] GDB cannot be used for debugging software that uses high Virtual Addresses)
 * PR server/23158 (gdbserver no longer functional on Windows)
 * PR breakpoints/23210 ([8.1/8.2 Regression] Bogus Breakpoint address adjusted from 0xf7fe7dd3 to 0xfffffffff7fe7dd3)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-01 16:12:53 +02:00
Koen Vandeputte
3df400c87e toolchain/gdb: bump to 8.1.1
GDB 8.1.1 brings the following fixes and enhancements over GDB 8.1:

 * PR gdb/22824 (misleading description of new rbreak Python function in GDB 8.1 NEWS file)
 * PR gdb/22849 (ctrl-c doesn't work in extended-remote)
 * PR gdb/22907 ([Regression] gdbserver doesn't work with filename-only binaries)
 * PR gdb/23028 (inconsistent disassemble of vcvtpd2dq)
 * PR gdb/23053 (Fix -D_GLIBCXX_DEBUG gdb-add-index regression)
 * PR gdb/23127 ([AArch64] GDB cannot be used for debugging software that uses high Virtual Addresses)
 * PR server/23158 (gdbserver no longer functional on Windows)
 * PR breakpoints/23210 ([8.1/8.2 Regression] Bogus Breakpoint address adjusted from 0xf7fe7dd3 to 0xfffffffff7fe7dd3)

GDB 8.1 includes the following changes and enhancements:

  * Breakpoints on C++ functions are now set on all scopes by default
    ("wild" matching);

  * Support for inserting breakpoints on functions marked with C++ ABI tags;

  * Target floating-point arithmetic emulation during expression evaluation
    (requires MPFR 3.1 or later);

  * Various Python Scripting enhancements;

  * Improved Rust support; in particular, Trait objects can now be inspected
    when debugging Rust code;

  * GDB no longer makes assumptions about the type of symbols without
    debugging information to avoid producing erroneous and often confusing
    results;

  * The 'enable' and 'disable' commands now accept a range of breakpoint
    locations;

  * New 'starti' command to start the program at the first instruction;

  * New 'rbreak' command to insert a number of breakpoints via a regular
    expression pattern (requires Python);

  * The 'ptype' command now supports printing the offset and size of
    the fields in a struct;

  * The 'gcore' command now supports dumping all the memory mappings
    ('-a' command-line option);

  * New shortcuts for TUI Single-Key mode: 'i' for stepi, and 'o' for nexti;

  * GDBserver enhancements:
    ** Support for transmitting environment variables to GDBserver;
    ** Support for starting inferior processes with a specified initial
       working directory;
    ** On Unix systems, support for globbing expansion and variable
       substitution of inferior command-line arguments;

  * Various completion enhancements;

  * The command used to compile and inject code with the 'compile' command
    is now configurable;

  * New '--readnever' command-line option to speed the GDB startup when
    debugging information is not needed;

  * Support for the following new native configurations:
    ** FreeBSD/aarch64 (aarch64*-*-freebsd*);
    ** FreeBSD/arm (arm*-*-freebsd*);

  * Support for the following new targets:
    ** FreeBSD/aarch64 (aarch64*-*-freebsd*);
    ** FreeBSD/arm (arm*-*-freebsd*);
    ** OpenRISC ELF (or1k*-*-elf)

  * Removed support for the following targets and native configurations:
    ** Solaris2/x86 (i?86-*-solaris2.[0-9]);
    ** Solaris2/sparc (sparc*-*-solaris2.[0-9]);

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-08-01 16:12:53 +02:00
Eneas U de Queiroz
f63f20fb93 adb: added patch for openssl 1.1.0 compatibility
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-08-01 11:44:30 +02:00
Rosy Song
f30583c41d nftables: allow to build with json support
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-08-01 11:25:04 +02:00
Daniel F. Dickinson
0b7a9688ce ar71xx: cr3000: cleanup board definition
1) Add comments so it's clear why we did things; this may prevent
   someone (e.g. me) from sinking time into fixing things that
   aren't broken and/or were done for reason.

2) Drop mdio 0 probe/register; we don't use ag1xx mdio bus 0.

3) Cosmetic reording of some code (tested) that makes the defintion
   more clear.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
2018-08-01 11:23:54 +02:00