Commit graph

157 commits

Author SHA1 Message Date
Felix Fietkau
e2999a8e5f mpc85xx: fix up m25p80 device id (#21286)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47691
2015-12-02 17:35:37 +00:00
Jo-Philipp Wich
0c250ad4cc mpc85xx: fix typo added in r47676
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47681
2015-12-01 09:22:53 +00:00
Jo-Philipp Wich
c977dfbec3 mpc85xx: record board id and model name in /etc/board.json
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47680
2015-11-30 12:49:19 +00:00
Jo-Philipp Wich
b4531995c8 mpc85xx: convert to ucidef_add_switch_ports()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47676
2015-11-30 11:09:29 +00:00
Jo-Philipp Wich
8e79f25991 mpc85xx: migrate network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47540
2015-11-20 23:52:31 +00:00
John Crispin
df47e4c55b target/mpc85xx: check if 'generic' subtarget for image file cuImage.tl-wdr4900-v1
Only add 'cuImage.tl-wdr4900-v1' to KERNEL_IMAGES if
the selected subtarget is 'generic'.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 47109
2015-10-05 10:25:28 +00:00
John Crispin
71db293eab mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1
This patch adds the RFKill GPIO control switch and enables another GPIO to
control power supply to USB Ports by emulating an LED GPIO for WDR4900v1.

Signed-off-by: Guo Wei Lim <alphasparc@gmail.com>

SVN-Revision: 46279
2015-07-09 06:56:45 +00:00
Felix Fietkau
cb47ccfc77 mpc85xx: disable SPE FPU support until musl gets support for it (fixes #19896)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46268
2015-07-08 12:06:16 +00:00
Felix Fietkau
7b85e8e316 mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.

This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45749
2015-05-25 21:15:37 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Imre Kaloz
3ee45e61fe mpc85xx: replace WDR4900 uci-defaults ethernet MAC address hack with DTS entry
This also changes the MAC address to one of the adresses actually used by the
stock firmware on one of the ethernet interfaces.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45599
2015-05-03 18:00:47 +00:00
Imre Kaloz
322d798510 mpc85xx: gianfar: add mtd-mac-address support
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45598
2015-05-03 17:59:46 +00:00
Imre Kaloz
b9fbf31fe7 mpc85xx: move newly created files from patch files to files directory
This will make these files much more maintainable.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45597
2015-05-03 17:58:45 +00:00
Imre Kaloz
af69bf56b6 drop 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45002
2015-03-26 09:42:59 +00:00
John Crispin
fe33c185bd mpc85xx: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44818
2015-03-16 07:40:47 +00:00
John Crispin
d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin
f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin
fa097e5ae5 kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
2015-03-06 07:56:21 +00:00
John Crispin
6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
John Crispin
1175e83f50 mpc85xx: add 3.19 support
It took very little to make the TL-WDR4900 work under 3.19:
- config is the same as for 3.18
- only patch 210 had to be refreshed, the other patches are
  the same as for 3.18
- in /etc/config/wireless the path options need to be prefixed
  with "platform/" ('platform/ffe09000.pci/...')

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44517
2015-02-24 11:59:35 +00:00
John Crispin
2f544d56d0 mpc85xx: add mpic timer clock frequency to avoid boot log warning
MPIC timers are enabled in the config, however a devicetree clock setting
is missing causing the following error:
/soc@ffe00000/timer@41100: cannot get timer frequency.
/soc@ffe00000/timer@42100: cannot get timer frequency.

This patch adds the missing clock and avoids the error.
It's a functional copy of this code
do_fixup_by_compat_u32(blob, "fsl,mpic",
        "clock-frequency", get_bus_freq(0), 1);
in arch/powerpc/cpu/mpc85xx/fdt.c in the u-boot code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44501
2015-02-22 08:28:48 +00:00
John Crispin
e071f4fd1a mpc85xx: set v3.18 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44496
2015-02-19 14:30:03 +00:00
John Crispin
7cfc88bac8 mpc85xx: add v3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44485
2015-02-17 20:28:36 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Felix Fietkau
daeec86fba mpc85xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43684
2014-12-13 11:54:49 +00:00
John Crispin
ce06a742c9 mcp85xx/p1020: fixup config-default
this was missed during the 3.14 bump

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43628
2014-12-11 18:39:22 +00:00
Felix Fietkau
1558a6bcbf mpc85xx: fix another typo in the image makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43625
2014-12-11 18:18:16 +00:00
Felix Fietkau
5c89c4a5de mpc85xx: add missing devicetree ranges property for ethernet devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43624
2014-12-11 18:18:10 +00:00
Felix Fietkau
4db5bc59b1 mpc85xx: fix typo in image name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43622
2014-12-11 17:52:12 +00:00
Felix Fietkau
2d9d3e7163 mpc85xx: fix initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43620
2014-12-11 15:29:39 +00:00
Felix Fietkau
ceccdc4a31 mpc85xx: update to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43413
2014-11-27 18:26:24 +00:00
Felix Fietkau
1846efcaaf mpc85xx: refresh linux 3.14 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43412
2014-11-27 18:26:17 +00:00
Felix Fietkau
d33db91a38 mpc85xx: remove the PHY reset change patch (no longer necessary)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43411
2014-11-27 18:26:12 +00:00
John Crispin
b994aca1e4 mpc85xx: fix missing dts target for kernel 3.14
With kernel 3.14 dts target p1010rdb was renamed to p1010rdb-pa.
To maintain compatibility define p1010rdb-pa as new standard and
copy p1010rdb.dts to p1010rdb-pa.dts under 3.10.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43371
2014-11-24 19:12:46 +00:00
John Crispin
bd164f233c mpc85xx: add 3.14 kernel support for mpc85xx platform
This patch adds 3.14 kernel support for the mpc85xx platform.
Works fine here with a TL-WDR4900 which seems to be the only
supported device using this platform.
There might be differences depending on HW version, therefore
I'd ask others to test too.

Changes to 3.10
  missing config options added to 3.14 config file
  patch 001: rebased
  patch 100: rebased
  patch 110: rebased
  patch 120: rebased
  patch 130: rebased
  patch 140: minor adjustment
  patch 200: removed, change went upstream
  patch 210: rebased
  patch 220: removed, change went upstream
  patch 750: new, fixes an issue with ethernet port autoneg being
             disabled due to changes in kernel phy handling

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43308
2014-11-19 09:20:55 +00:00
John Crispin
c997410461 mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1
This works around a bootloader issue where every device
has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch
we read the macs from config-partition during initial network
setup. We have 9 valid macs stored in the partition, the
1st two are used for the radios, 3 and 4 are now used for WAN/LAN.

on an already setup / running device we can get the real macs with
. /lib/functions.sh
. /lib/functions/system.sh
echo "LAN = $(mtd_get_mac_binary config 338)"
echo "WAN = $(mtd_get_mac_binary config 344)"

see:
https://dev.openwrt.org/ticket/14714

from the ticket / user klondike:
U-Boot passed this commit ecd1a09b81
http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html
I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected.
                                                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have been checking the contents of the dtb on the flash, this particular bit is quite revealing:

ethernet@b0000 {
                        #address-cells = <0x1>;
                        #size-cells = <0x1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "fsl,etsec2";
                        fsl,num_rx_queues = <0x8>;
                        fsl,num_tx_queues = <0x8>;
                        local-mac-address = [00 00 00 00 00 00];
                                             ^^^^^^^^^^^^^^^^^

                        interrupt-parent = <0x2>;
                        phy-handle = <0x3>;
                        phy-connection-type = "rgmii-id";
                        ptimer-handle = <0x4>;

                        queue-group@0 {
                                #address-cells = <0x1>;
                                #size-cells = <0x1>;
                                reg = <0xb0000 0x1000>;
                                rx-bit-map = <0xff>;
                                tx-bit-map = <0xff>;
                                interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
                        };
                };

I also have been checking the live device map to find this:

root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b0000/local-mac-address
00000000  00 04 9f ef 01 01                                 |......|
00000006
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b1000/local-mac-address
*
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b2000/local-mac-address
*

My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided)
falls back to the default MAC provided by the old code, the kernel then receives thee modified
device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't.

This can be seen at
target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch

The enetaddr is filled up by using the device tree data by the process_boot_dtb
function and used by the platform_fixups function to set the eth0 address
(by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ).
But instead we should be used the device address which to my understanding is
provided in the mtd.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43074
2014-10-26 17:58:53 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
John Crispin
28d57f707d mpc85xx: use wpad-mini in WDR4900 profile instead of wpad
This change makes the profile of WDR4900 more consistent with other router
specific profiles.

Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>

SVN-Revision: 42896
2014-10-14 10:30:56 +00:00
John Crispin
7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
John Crispin
ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin
994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Jo-Philipp Wich
93742047af mpc85xx: fix typo in TP-Link WDR4900 profile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41229
2014-06-17 15:01:47 +00:00
John Crispin
f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Gabor Juhos
d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Felix Fietkau
4a9ea80ef0 /lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40411
2014-04-07 10:29:47 +00:00
Gabor Juhos
627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Felix Fietkau
7a8f13f33c gianfar: Fix reported number of sent bytes to BQL
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>

SVN-Revision: 39692
2014-02-22 14:42:48 +00:00