Commit graph

152 commits

Author SHA1 Message Date
Felix Fietkau
ca2d0c15cc cns3xxx: add experimental 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43406
2014-11-27 16:24:32 +00:00
Felix Fietkau
d57b64dfb0 cns3xxx: fix pcie root bridge topology
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43403
2014-11-27 15:02:05 +00:00
Felix Fietkau
d0e4f71b9a cns3xxx: add missing dma mask for ethernet device
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43399
2014-11-26 18:48:05 +00:00
Felix Fietkau
ebf6331c10 cns3xxx: switch to using the upstream dwc2 driver instead of dwc_otg
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43398
2014-11-26 18:01:38 +00:00
Felix Fietkau
211669da3b cns3xxx: update to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43397
2014-11-26 18:01:29 +00:00
Felix Fietkau
0525ffa4c5 cns3xxx: remove bogus image added in r38703
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43396
2014-11-26 18:01:18 +00:00
Felix Fietkau
8c136e6b56 cns3xxx: set base device for ethernet port netdevs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43395
2014-11-26 18:01:07 +00:00
Felix Fietkau
365cf9d10c cns3xxx: fix passing the device to dma mapping ops
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43394
2014-11-26 18:00:52 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Felix Fietkau
fa5237d936 cns3xxx: Adopt irq_domain support for cns3xxx gpio driver
Have gpio driver adopt irqdomain support so that there are
non-overlapping allocations of irq numbers mapped to gpio's.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42844
2014-10-08 10:28:10 +00:00
Felix Fietkau
736419452b cns3xxx: fix shared PCI interrupt mapping
This patch originally failed to combine INTA/B/C/D onto a single ARM CPU
interrupt. Instead, it mapped INTA/B/C and excluded D. This patch
corrects the issue by mapping all four interrupts to the single ARM CPU
interrupt. The original intent of the patch still holds as the newer PCB
take advantage of isolated interrupts. This fix only applies to older
PCB's that do not route INTA/B/C/D to unique external ARM CPU
interrupts.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 42830
2014-10-07 10:37:48 +00:00
Felix Fietkau
0563e0225e cns3xxx: fix register for enabling MMC/SD pins
also fixes a GPIO related regression from the upgrade to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42829
2014-10-07 10:37:09 +00:00
Felix Fietkau
f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Felix Fietkau
1839d1b912 cns3xxx: support isolated PCI interrupts on newer Laguna PCBs
The cns3xxx uses irq61 for pcie0_intr which in the case of a PCIe-to-PCI
bridge ends up combining INTA/B/C/D on a single ARM CPU interrupt. This is
not optimal when you have multiple cores. To overcome this limitation an
enhancement was made on newer Laguna PCB's that support miniPCI cards
to route the INTA/B/C/D signals to unique external ARM CPU interrupts which
can help balance CPU core utilization and in some cases increase overall
system performance or responsiveness.

For more details see:
 http://trac.gateworks.com/wiki/multicoreprocessing#PCIInterruptsteering

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42400
2014-09-02 16:44:40 +00:00
Felix Fietkau
8dac6739f8 cns3xxx: add myself as maintainer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41928
2014-08-01 09:23:50 +00:00
Felix Fietkau
2d5de51451 cns3xxx: fix building initramfs and non-initramfs together
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41922
2014-08-01 07:10:00 +00:00
Felix Fietkau
3c7cd63b72 cns3xxx: update to linux 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41917
2014-07-31 23:40:49 +00:00
Felix Fietkau
0426643bd5 cns3xxx: fix initramfs build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41915
2014-07-31 23:40:40 +00:00
John Crispin
f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Felix Fietkau
2603c9045d cns3xxx: ethernet - revert: clean up tx descs only when needed
This reverts commit 0772ab938c0aedd7f4cc7127059d6ce8cf929dfa.

Trying to optimize calls to eth_complete_tx in this fasion causes a regression
where when sending only the tx queue can get disabled until a packet is
received. This original call to eth_schedule_poll() is scheduled so it
should not cause a performance issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40592
2014-04-29 15:52:12 +00:00
Imre Kaloz
8411a5703f Add GW2385 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39894
2014-03-12 13:40:13 +00:00
Imre Kaloz
68022cac64 various dwc (OTG) driver fixups
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39892
2014-03-12 13:37:40 +00:00
Felix Fietkau
bbc0c67bb0 cns3xxx: fix uImage build issue
The uImage target will always fail on a clean build due to dependency issues.
Building the uImage isn't necessary anyway as its re-built with correct
entry points in image/Makefile so remove it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39778
2014-03-05 17:37:43 +00:00
Felix Fietkau
8665c57923 cns3xxx: ethernet - clean up tx descs only when needed
We already clean up tx descriptors in the napi eth_poll() function so it
would likely be rare to run out of available descriptors in eth_xmit. Thus
we can clean them up only when needed and return busy only when we
still don't have enough.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39762
2014-02-27 23:02:43 +00:00
Felix Fietkau
96eb3d883d cns3xxx: ethernet - resolve SMP issue
The combination of r35942 and r35952 causes an issue where eth_schedule_poll()
can be called from a different CPU between the call to napi_complete() and the
setting of cur_index which can break the rx ring accounting and cause ethernet
latency and/or ethernet stalls.  The issue can be easilly created by adding
a couple of artificial delays such as:

@@ -715,6 +715,7 @@ static int eth_poll(struct napi_struct *napi, int budget)

 	if (!received) {
 		napi_complete(napi);
+udelay(1000);
 		enable_irq(IRQ_CNS3XXX_SW_R0RXC);
 	}

@@ -727,6 +728,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
 	rx_ring->cur_index = i;

 	wmb();
+udelay(1000);
 	enable_rx_dma(sw);

 	return received;

This patch moves the setting of cur_index back up where it needs to be and
addresses the original corner case that r35942 was trying to catch in an
improved fashion by checking to see if the rx descriptor ring has become
full before interrupts were re-enabled so that a poll can be scheduled again
and avoid an rx stall caused by rx interrupts ceasing to fire again.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39761
2014-02-27 23:02:37 +00:00
Imre Kaloz
28de84d024 add uImage image build
- add building of a standard uImage along with the combined kernel+rootfs
- remove 'old' image build - that was for a very old and obsolete bootloader

To update the bootloader for GW2387,GW2388,GW2391 (NOR Flash) from uboot:
put latest NOR bootloader on tftp server:

http://svn.gateworks.com/laguna/trunk/images/u-boot_nor.bin

 Laguna> setenv ipaddr <localip>
 Laguna> setenv ipaddr <serverip>
 Laguna> tftpboot 0x800000 laguna/u-boot-nor.bin
 Laguna> erase 0x10000000 +$(filesize)
 Laguna> cp.b 0x800000 0x10000000 $(filesize)
 Laguna> reset

To update the bootloader for GW2380,GW2382,GW2383 (SPI Flash) from uboot:
put latest SPI bootloader on tftp server:

http://svn.gateworks.com/laguna/trunk/images/u-boot_spi.bin

 Laguna> setenv ipaddr <localip>
 Laguna> setenv ipaddr <serverip>
 Laguna> tftpboot 0x800000 laguna/u-boot-spi.bin
 Laguna> erase 0x60000000 +$(filesize)
 Laguna> cp.b 0x800000 0x60000000 $(filesize)
 Laguna> reset

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38703
2013-11-10 09:57:07 +00:00
Imre Kaloz
b0fe7d1ec6 add pushbutton GPIO for GW2380/82/83
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38702
2013-11-10 09:55:17 +00:00
Felix Fietkau
c8609ab4f8 build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
2013-09-26 17:53:20 +00:00
Felix Fietkau
73c4d73d6d build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Gabor Juhos
46225b99d9 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
Gabor Juhos
e57c7d6c12 kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
Gabor Juhos
151cadfe32 kernel: update linux 3.8 to 3.8.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
Gabor Juhos
604395650a kernel: update linux 3.8 to 3.8.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
Felix Fietkau
6436b3f736 cns3xxx: fix USB ehci/ohci platform driver
Update ehci/ohci driver registration to conform to the new platform
drivers.

This fixes missing USB host support in 3.8.x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 36309
2013-04-10 16:20:50 +00:00
Felix Fietkau
fde143b66f cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
Gabor Juhos
f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
Gabor Juhos
07532dca7f kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
Felix Fietkau
bd6c9d6252 cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
SVN-Revision: 35953
2013-03-11 02:29:53 +00:00
Felix Fietkau
d7a529709a cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
SVN-Revision: 35952
2013-03-11 02:29:47 +00:00
Felix Fietkau
0d13baff1e cns3xxx: increase number of ethernet driver rx buffers
SVN-Revision: 35951
2013-03-10 21:59:32 +00:00
Felix Fietkau
ee2b511e1f cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
SVN-Revision: 35950
2013-03-10 21:59:28 +00:00
Felix Fietkau
d22ac8d8fb cns3xxx: minor ethernet driver cleanup
SVN-Revision: 35949
2013-03-10 21:59:21 +00:00
Felix Fietkau
9facda9570 cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
SVN-Revision: 35943
2013-03-10 18:25:20 +00:00
Felix Fietkau
c44506fcbd cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.

SVN-Revision: 35942
2013-03-10 18:25:16 +00:00
Felix Fietkau
c1adc79328 cns3xxx: fix ethernet driver memory barrier usage
SVN-Revision: 35941
2013-03-10 18:25:11 +00:00
Felix Fietkau
446409f43e cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
SVN-Revision: 35917
2013-03-10 01:27:04 +00:00