Commit graph

23 commits

Author SHA1 Message Date
Felix Fietkau
2270fc5947 Revert "lantiq: enable SMP for XRX200"
This reverts commit cc3bfdb62f.

Apparently the ethernet driver is not SMP safe, as reported in
https://bugs.lede-project.org/index.php?do=details&task_id=27

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-27 13:06:56 +02:00
John Crispin
bf007a480a lantiq: Add Support for Fritz!Box 7360 SL
Signed-off-by: Sebastian Ortwein <krone@animeland.de>
Tested-by: Guido Lipke <lipkegu@gmail.com>
2016-06-13 22:51:43 +02:00
Felix Fietkau
69c99a423a lantiq: enable swconfig LED support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau
cc3bfdb62f lantiq: enable SMP for XRX200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau
2d48f93ff4 lantiq: add Buffalo WBMR-300HPD support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau
cc87d144e1 lantiq: refresh xrx200 kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Mathias Kresin
db66b157db lantiq: VGV7510KW22 - enable the IP101A phy
The RJ45 WAN port is used for xDSL as well as the IP101A.

The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the
pins 4,5 are connected to the xdsl chip.

Drop the ip101a-rst node. It can't be controlled and is not required
at all.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Felix Fietkau
04ad02d132 lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
Felix Fietkau
af857db692 lantiq: Disable CONFIG_SPI_GPIO
All devices are now using the HW SPI driver, so this is not necessary
anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48291
2016-01-17 19:55:48 +00:00
John Crispin
d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin
f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin
6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
John Crispin
c5b7e1aaf4 lantiq: PCI should be enabled on vrx200
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44419
2015-02-12 08:23:45 +00:00
John Crispin
826b461427 lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44348
2015-02-09 12:13:25 +00:00
John Crispin
7f77870c19 Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
Gabor Juhos
d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
2014-07-13 16:25:54 +00:00
John Crispin
5f31f01853 lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget
Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.

These drivers are not needed for ASE, Danube and AR9.
As side effect PHY11G and PHY22F firmwares are not included in the
kernel image, which saves 64 KB.

Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41449
2014-07-01 13:18:38 +00:00
John Crispin
e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin
58eccdac4f lantiq: fix vr9 ubi handling
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
2014-04-03 14:26:24 +00:00
John Crispin
07eb49b7e0 lantiq: xrx200: add ubi support in the kernel
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40314
2014-03-30 09:15:54 +00:00
Luka Perkov
26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
John Crispin
1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin
18b76c66fb lantiq: add a subtarget for the xrx200 SoC family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38029
2013-09-17 21:46:00 +00:00