Commit graph

30309 commits

Author SHA1 Message Date
Rafał Miłecki
15fb17791a mpc83xx: start work on 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44573
2015-02-28 18:15:59 +00:00
Rafał Miłecki
151b6b3432 omap: complete 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44572
2015-02-28 14:56:53 +00:00
Rafał Miłecki
dccefe7b53 omap: start working on 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44571
2015-02-28 13:54:51 +00:00
Jonas Gorski
b694c45d33 brcm63xx: backport and enable DT spi-gpio no CS support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44570
2015-02-27 23:48:48 +00:00
Jonas Gorski
b6ad4b7332 brcm63xx: fix image generation and broken patch
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44569
2015-02-27 23:48:32 +00:00
Jonas Gorski
d75cd5be37 b53: fix mmap register read/writes > 32 bit
For bcm63xx integrated switches, broadcom changed the data endianess
to match the system endianess. But this only applies to within one word,
which causes 48/64 bit values to be still split into their "litte endian"
groups.

E.g. 48 bit values (with 5 being the most significant byte) aligned

0x00 ..01  or   0123
0x04 2345       45..

will become

0x00 ..10 resp. 3210
0x04 5432       54..

Likewise for 64 bit values.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44568
2015-02-27 17:40:17 +00:00
Jonas Gorski
8ff23c60e2 brcm63xx: remove gpio base workaround
Now that all gpio users without named gpios use DT, we do not need
to fix the gpio controller bases anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44567
2015-02-27 17:40:09 +00:00
Jonas Gorski
b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00
Jonas Gorski
eea227c60d brcm63xx: probe gpio controllers through DT
Add a generic mmio gpio controller based driver and probe it
through device tree.

Use aliases for base calculation until we converted all users to
device tree or named gpios.

Convert bcm63xx_enet's ephy-reset gpio to use a named gpio.

While at it, remove the duplicate reset gpio defintion for livebox.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44565
2015-02-27 17:39:49 +00:00
Jonas Gorski
1efb7398e1 brcm63xx: convert BTV2500V to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44564
2015-02-27 17:39:29 +00:00
Jonas Gorski
90c15beee6 brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44563
2015-02-27 17:39:21 +00:00
Jonas Gorski
5a9b7c28c3 brcm63xx: convert RTA1025 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44562
2015-02-27 17:39:13 +00:00
Jonas Gorski
9a65e1a570 brcm63xx: use dtb for cvg834g
Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert
it to use ImageDTB. Since HCS requires more arguments, enhance the max
arguments of the call.
The image name is intentionally left blank to prevent non-initramfs
images to be built, as they currently contain no rootfs and consequently
won't work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44561
2015-02-27 17:39:07 +00:00
Jonas Gorski
69b327247c brcm63xx: image: move image argument to front in *DTB calls
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44560
2015-02-27 17:38:51 +00:00
Jonas Gorski
f3c071b376 brcm63xx: add dts and profile for Livebox
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44559
2015-02-27 17:38:46 +00:00
Jonas Gorski
dd7625ef15 brcm63xx: allow lzma to use 32MB RAM
Most 16 MiB RAM devices don't even load elf kernels, so it's safe to
assume we have at least 32 MB RAM. This fixes tftp booting with the
default package set as this already produces an uncompressed
kernel > 8 MiB.

New limit is 8 MiB compressed / 24 MiB compressed.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44558
2015-02-27 17:38:28 +00:00
Jonas Gorski
92eb27f56d package: mtd: move bcm963xx_tag definition into source code
Remove the need for the header file to be exported - we don't need most
of it anyway; all we care about are the offset of the rootfs length and
header crc fields.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44557
2015-02-27 17:38:25 +00:00
Jonas Gorski
bb54859543 brcm63xx: do not align squashfs rootfs start
We do not need to align the start of read only rootfs's to erase blocks.
This allows us to write the squashfs rootfs directly behind the kernel,
potentially freeing up one erase block.

We still need to align for jffs2, so add a flag for imagetag to
optionally align the rootfs start.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44556
2015-02-27 17:38:14 +00:00
Jonas Gorski
d4652e817a brcm63xx: drop call to prepare_generic_squashfs
We do not use the result, so no need to call it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44555
2015-02-27 17:38:09 +00:00
Jonas Gorski
56fd5df368 firmware-utils: imagetag: use cyg_crc32 instead of duplicating code
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44554
2015-02-27 17:38:05 +00:00
Felix Fietkau
b64ca483ef kernel: fix 3.18+ if_bridge.h header conflict with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44553
2015-02-27 07:35:26 +00:00
Felix Fietkau
1a3028b2fc procd: update to the latest version, fixes musl compile error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44552
2015-02-27 07:34:47 +00:00
Felix Fietkau
379dc5c11f build: move tmp/.prereq-build to staging_dir/host to gracefully handle staging_dir deletion
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44551
2015-02-27 07:34:24 +00:00
Jo-Philipp Wich
03db988eaa ubox: fix segmentation fault in insmod
Fix segfault in kmodloader insmod mode due to uninitialized module
directory list.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44549
2015-02-26 21:23:55 +00:00
Jo-Philipp Wich
b977134dc7 uhttpd: relay stderr to syslog
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44548
2015-02-26 13:44:05 +00:00
Jo-Philipp Wich
fd670d2756 procd: add support for relaying daemon stdio to syslog
Procd enabled init scripts can now specify:

  procd_set_param stdout 1
  procd_set_param stderr 1

... to relay their respective standard IO streams to the system log.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44547
2015-02-26 13:42:47 +00:00
Jo-Philipp Wich
e0f48f8d30 libubox: implement ulog_close() and call it on ulog_open()
This is required to properly update syslog idents when switching between
log modes.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44546
2015-02-26 13:42:44 +00:00
Jo-Philipp Wich
46432b13b6 fstools: switch to ulog api
Update to git head in order to switch the block, mount_root etc. logging to
the common ulog() api for putting early boot messages into dmesg.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44545
2015-02-26 10:25:29 +00:00
Jo-Philipp Wich
cf6c1e5d26 ubox: switch to ulog api
Update to git head in order to switch the kmodloader logging to the common
ulog() api for putting early boot messages into dmesg.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44544
2015-02-26 10:25:24 +00:00
Jo-Philipp Wich
9e28fe285b procd: switch to ulog api
Update to git head in order to switch the procd logging to the common ulog()
api for putting early boot messages into dmesg.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44543
2015-02-26 10:25:21 +00:00
Jo-Philipp Wich
948483f93c libubox: introduce generic logging api
Update to git head in order to introduce the new ulog() logging api which
supports early boot logging to dmesg.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44542
2015-02-26 10:25:18 +00:00
Steven Barth
547ac60813 6rd: honor tunlink in host dependency
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 44541
2015-02-26 07:42:12 +00:00
Steven Barth
0f365e4cb9 firewall: fix some more null-pointer accesses
thanks to Hans Dedecker

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 44540
2015-02-26 07:14:41 +00:00
Jo-Philipp Wich
ff009fb74c fstools: fix build with enabled ubifs extroot support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44538
2015-02-25 18:54:13 +00:00
Jo-Philipp Wich
b2eb77089b fstools: fix multiple extroot problems
- Support external overlays on non-MTD systems again
- Account for new directory structure of overlayfs partitions (additional upper/ component)
- Support executing block from either overlay or rom
- Support loading fstab from either overlay or rom
- Log extroot failures to dmesg

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44535
2015-02-25 13:03:16 +00:00
John Crispin
2f0b826b81 modules: make ahci-platform depend on TARGET_ipq806x
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44534
2015-02-25 12:01:19 +00:00
Jo-Philipp Wich
979e6ca857 ubox: kmodloader: support loading kmods from multiple directories
This is required during early boot in the extroot setup phase to support
loading kmods from the overlay that depend on kmods on the rom partition.

The subsequent mount_root updates will use the LD_LIBRARY_PATH env
variable to pass kmod directories to kmodloader.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44533
2015-02-25 11:48:27 +00:00
Imre Kaloz
f76a752c57 generic/4.0: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44532
2015-02-24 18:53:14 +00:00
Imre Kaloz
11e93be20d generic/4.0: drop patches applied upstream
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44531
2015-02-24 18:35:17 +00:00
Imre Kaloz
c407264643 generic/4.0: drop 3.18 specifix dwc2 backport
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44530
2015-02-24 18:30:16 +00:00
Imre Kaloz
efea65bb99 generic/4.0: the ubi patches has been fixed in the 3.19 patchset already
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44529
2015-02-24 18:27:49 +00:00
John Crispin
e67f5ed2e6 ar71xx: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44528
2015-02-24 12:01:08 +00:00
John Crispin
1c5a2826e3 ar71xx: Add QCA953X version2 SoC support
http://patchwork.ozlabs.org/patch/435234/

Signed-off-by: 郭传鈜 <gch981213@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44527
2015-02-24 12:01:00 +00:00
John Crispin
9358a8a798 ar71xx: TL-WA7210n v2 support
This patch adds support for TP-Link TL-WA7210n[0]

[0] http://www.tplink.com/en/products/details/?model=TL-WA7210N

Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net>

SVN-Revision: 44526
2015-02-24 12:00:50 +00:00
John Crispin
7c24d8627f ipq806x: add ahci to default packages
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44525
2015-02-24 12:00:22 +00:00
John Crispin
3f22244009 modules: add ahci-platform
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44524
2015-02-24 12:00:16 +00:00
John Crispin
458c37fb14 ipq806x: add default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44523
2015-02-24 12:00:09 +00:00
John Crispin
de7100d818 ipq806x: initialize the network on AP148
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44522
2015-02-24 12:00:04 +00:00
John Crispin
114da1595a kernel: add qca-nss-gmac as a new module
This driver is used on IPQ806x to instanciate & drive the ethernet
interfaces.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44521
2015-02-24 11:59:56 +00:00
John Crispin
9b6adc2d3a ipq806x: enable GMAC support in DTS
This adds the GMAC entries in the ipq806x dtsi file as well as in the
ap148 specific dts file.

This also adds the MDIO change as well.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44520
2015-02-24 11:59:51 +00:00