Commit graph

13895 commits

Author SHA1 Message Date
John Crispin
0fd202f3e5 ipq806x: add db149 dts files
DB149 is an IPQ806x based development platform. This patch adds the dts
files to support it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45536
2015-04-21 07:15:37 +00:00
John Crispin
be5f3b9016 ipq806x: enable AT803x driver
Certain IPQ806x based platforms are making use of this PHY. So we'll
enable it so it gets detected as such.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45535
2015-04-21 07:15:30 +00:00
John Crispin
ca7fe0d4c6 kernel: fix generic/3.18 wpan symbols
-removed symbol because it should be handled by wpan.mk
-add missing FAKEHARD symbol (this symbol is removed in Kernel 4.0)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 45530
2015-04-21 06:59:18 +00:00
Luka Perkov
48d81861a6 ar71xx: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45528
2015-04-20 20:47:53 +00:00
Luka Perkov
9d76de9771 ar71xx: add support for compex wpj344
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45527
2015-04-20 20:47:48 +00:00
Felix Fietkau
0a4b20166d ar71xx: Increase RXD/RDV to 2 on OM5P-AN
It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV
but 2. These was found when testing with a NetGear GS752TP POE switch with a
cable length of 50ft and 250ft.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45524
2015-04-20 15:01:00 +00:00
Felix Fietkau
f4e6418a32 ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x
The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared
by the function ath79_setup_ar934x_eth_cfg. Clearing these in the
ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they
rely on the preset value by the bootloader.

Instead another function is introduced which also works on ETH_CFG on AR934x.
It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on
machines which require special settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45523
2015-04-20 15:00:52 +00:00
Felix Fietkau
c75a0e86b1 ar71xx: add mask and shift for RXD/RDV bits in AR934X register file
The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X
register file") introduced definitions for some bits in the RDV/RXD part of the
ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is
specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit
only specified the lower bits. The upper bits also have to be unset when the
lower bits should only be set.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45522
2015-04-20 15:00:41 +00:00
Felix Fietkau
5c6925a23b ar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN
The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the
enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY.
Othwise the throughput in gigabit mode is heavily reduced.

Signed-off-by: Sven Eckelmann <sven@open-mesh.org>

SVN-Revision: 45521
2015-04-20 15:00:20 +00:00
Jo-Philipp Wich
0ee9504911 all: replace genext2fs with make_ext4fs
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45517
2015-04-20 13:57:43 +00:00
Felix Fietkau
610ce30c3a Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)
Profile definitions need to be checked and fixed before this patch can
be applied again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45511
2015-04-19 19:19:12 +00:00
Felix Fietkau
d808d9be86 ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45507
2015-04-19 16:31:54 +00:00
Jonas Gorski
0dfba24e9a kernel: refresh generic patches
Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45506
2015-04-19 11:38:46 +00:00
Jonas Gorski
681eb8c3de brcm63xx: fix bcm63268 rgmii port rgmii configuration
This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.

Fixes e.g. GbE ports on BCM963268BU_P300.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45505
2015-04-19 11:38:42 +00:00
Jonas Gorski
440124dcbb brcm63xx: allow using all four rgmii ports on bcm6316x
At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45504
2015-04-19 11:38:24 +00:00
Jonas Gorski
c1ea714d43 brcm63xx: BCM963268BU_P300 reference board fixes
- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45499
2015-04-18 22:33:50 +00:00
John Crispin
d9ebcce56c ar71xx/image: remove duplicated rootfs in new tplink initramfs images
The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45491
2015-04-18 10:19:28 +00:00
John Crispin
09c4b0e8f3 ar71xx/image: move TPLINK-LZMA image to new build code
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45490
2015-04-18 10:19:23 +00:00
John Crispin
13204f6a35 ar71xx/image: add template tplink-16mlzma
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45489
2015-04-18 10:19:14 +00:00
John Crispin
1efdccc055 ar71xx/image: fix imagesize of template tplink-8mlzma
The new image size is verified by a running tplink device and checked
against mktplinkfw source code.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 45488
2015-04-18 10:19:09 +00:00
Jonas Gorski
6232e845da brcm63xx: fix bcm96318ref_p300 profile name
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45486
2015-04-18 09:34:17 +00:00
Felix Fietkau
c73adc80a3 bcm53xx: add profiling support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
Luka Perkov
22045c383d imx6: put uboot-envtools in DEFAULT_PACKAGES
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478
2015-04-17 13:47:13 +00:00
Luka Perkov
cc8628a6a3 kirkwood: put uboot-envtools in DEFAULT_PACKAGES
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45477
2015-04-17 13:47:09 +00:00
Rafał Miłecki
9c02b23a77 brcm47xx: add buttons support for WRT310N v2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45474
2015-04-17 08:12:00 +00:00
Rafał Miłecki
9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
Rafał Miłecki
b12e85a451 brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45472
2015-04-17 05:45:46 +00:00
Rafał Miłecki
e85294a957 brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45470
2015-04-16 21:43:27 +00:00
Rafał Miłecki
c8eed9a50a brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45469
2015-04-16 21:20:37 +00:00
Felix Fietkau
582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
Felix Fietkau
b860db2c63 bcm53xx: add power button for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
Felix Fietkau
c9aeb21405 bcm53xx: add power button for Buffalo WZR-1750DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45466
2015-04-16 20:09:48 +00:00
Felix Fietkau
a7f768bdc8 bcm53xx: add USB LED for Buffalo WZR-1750DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45465
2015-04-16 20:09:42 +00:00
Felix Fietkau
f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
Felix Fietkau
d51420eedc bcm53xx: increate trx maxlen to prevent build failures with bigger images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
Felix Fietkau
f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
Luka Perkov
76330e9b57 mvebu: better integrate xp-gp
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
Felix Fietkau
c64fdadea7 bcm53xx: make use of the new board detection layer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Luka Perkov
0926e4c22f mvebu: bring back CONFIG_CPU_THERMAL
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45455
2015-04-16 00:23:34 +00:00
Luka Perkov
a635c0a04e mvebu: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45454
2015-04-16 00:10:42 +00:00
Luka Perkov
dade4535bb mvebu: fix typo in marvell profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45453
2015-04-15 16:23:20 +00:00
Luka Perkov
a046ce235f mvebu: better integrate 385-ap-db
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
Felix Fietkau
147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7 bcm53xx: add USB 2.0 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
Rafał Miłecki
3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
Rafał Miłecki
3cb8bf44e6 otrx: change command line API to start with a mode
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
John Crispin
911cf6da60 ar71xx: Enable AT803X_PHY to set special flags
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45439
2015-04-14 19:00:57 +00:00
John Crispin
efbdc168ff ar71xx: fix ethernet packet loss issues on OM5P-AN
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.

The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45438
2015-04-14 19:00:51 +00:00
Felix Fietkau
5c9c670616 kernel: update bgmac patches to the latest version submitted
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45431
2015-04-14 12:17:20 +00:00