ar71xx: add support for compex wpj344

Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45527
This commit is contained in:
Luka Perkov 2015-04-20 20:47:48 +00:00
parent 18f55ddf7d
commit 9d76de9771
9 changed files with 224 additions and 7 deletions

View file

@ -296,6 +296,9 @@ get_status_led() {
wp543)
status_led="wp543:green:diag"
;;
wpj344)
status_led="wpj344:green:status"
;;
wpj558)
status_led="wpj558:green:sig3"
;;

View file

@ -360,6 +360,13 @@ wpe72)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
wpj344)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 3"
ucidef_add_switch_vlan "switch0" "2" "0t 2"
;;
wpj558)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"

View file

@ -801,6 +801,9 @@ ar71xx_board_detect() {
*WPE72)
name="wpe72"
;;
*WPJ344)
name="wpj344"
;;
*WPJ558)
name="wpj558"
;;

View file

@ -184,6 +184,7 @@ platform_check_image() {
db120 | \
f9k1115v2 |\
hornet-ub | \
wpj344 | \
wpj558 | \
zcn-1523h-2 | \
zcn-1523h-5)

View file

@ -136,6 +136,7 @@ CONFIG_ATH79_MACH_WNR2000_V4=y
CONFIG_ATH79_MACH_WNR2200=y
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WPJ344=y
CONFIG_ATH79_MACH_WPJ558=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y

View file

@ -0,0 +1,177 @@
/*
* Compex WPJ344 board support
*
* Copyright (c) 2011 Qualcomm Atheros
* Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-usb.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define WPJ344_GPIO_LED_USB 11
#define WPJ344_GPIO_LED_WLAN_5G 12
#define WPJ344_GPIO_LED_WLAN_2G 13
#define WPJ344_GPIO_LED_STATUS 14
#define WPJ344_GPIO_LED_WPS 15
#define WPJ344_GPIO_BTN_RESET 16
#define WPJ344_KEYS_POLL_INTERVAL 20 /* msecs */
#define WPJ344_KEYS_DEBOUNCE_INTERVAL (3 * WPJ344_KEYS_POLL_INTERVAL)
#define WPJ344_MAC0_OFFSET 0
#define WPJ344_MAC1_OFFSET 6
#define WPJ344_WMAC_CALDATA_OFFSET 0x1000
#define WPJ344_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led wpj344_leds_gpio[] __initdata = {
{
.name = "wpj344:green:status",
.gpio = WPJ344_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "wpj344:green:wps",
.gpio = WPJ344_GPIO_LED_WPS,
.active_low = 1,
},
{
.name = "wpj344:green:wlan-5g",
.gpio = WPJ344_GPIO_LED_WLAN_5G,
.active_low = 1,
},
{
.name = "wpj344:green:wlan-2g",
.gpio = WPJ344_GPIO_LED_WLAN_2G,
.active_low = 1,
},
{
.name = "wpj344:green:usb",
.gpio = WPJ344_GPIO_LED_USB,
.active_low = 1,
}
};
static struct gpio_keys_button wpj344_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WPJ344_KEYS_DEBOUNCE_INTERVAL,
.gpio = WPJ344_GPIO_BTN_RESET,
.active_low = 1,
},
};
static struct ar8327_pad_cfg wpj344_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_led_cfg wpj344_ar8327_led_cfg = {
.led_ctrl0 = 0x00000000,
.led_ctrl1 = 0xc737c737,
.led_ctrl2 = 0x00000000,
.led_ctrl3 = 0x00c30c00,
.open_drain = true,
};
static struct ar8327_platform_data wpj344_ar8327_data = {
.pad0_cfg = &wpj344_ar8327_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.led_cfg = &wpj344_ar8327_led_cfg,
};
static struct mdio_board_info wpj344_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &wpj344_ar8327_data,
},
};
static void __init wpj344_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_gpio_output_select(WPJ344_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj344_leds_gpio),
wpj344_leds_gpio);
ath79_register_gpio_keys_polled(-1, WPJ344_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wpj344_gpio_keys),
wpj344_gpio_keys);
ath79_register_usb();
ath79_register_wmac(art + WPJ344_WMAC_CALDATA_OFFSET, NULL);
ath79_register_pci();
mdiobus_register_board_info(wpj344_mdio0_info,
ARRAY_SIZE(wpj344_mdio0_info));
ath79_register_mdio(1, 0x0);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ344_MAC0_OFFSET, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ344_MAC1_OFFSET, 0);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
AR934X_ETH_CFG_SW_ONLY_MODE);
/* GMAC0 is connected to an AR8327 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x06000000;
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(0);
ath79_register_eth(1);
}
MIPS_MACHINE(ATH79_MACH_WPJ344, "WPJ344", "Compex WPJ344", wpj344_setup);

View file

@ -27,6 +27,16 @@ endef
$(eval $(call Profile,WPE72))
define Profile/WPJ344
NAME:=Compex WPJ344
endef
define Profile/WPJ344/Description
Package set optimized for the Compex WPJ344 board.
endef
$(eval $(call Profile,WPJ344))
define Profile/WPJ558
NAME:=Compex WPJ558
endef

View file

@ -492,6 +492,7 @@ uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel)
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
@ -1364,6 +1365,7 @@ $(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
@ -1594,6 +1596,7 @@ $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))

View file

@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -16,22 +16,190 @@
@@ -16,22 +16,191 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@ -178,6 +178,7 @@
+ ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
+ ATH79_MACH_WP543, /* Compex WP543 */
+ ATH79_MACH_WPE72, /* Compex WPE72 */
+ ATH79_MACH_WPJ344, /* Compex WPJ344 */
+ ATH79_MACH_WPJ558, /* Compex WPJ558 */
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
@ -264,7 +265,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
@@ -11,62 +75,976 @@ config ATH79_MACH_AP121
@@ -11,62 +75,986 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@ -499,6 +500,16 @@
+ select ATH79_DEV_USB
+ select MYLOADER
+
+config ATH79_MACH_WPJ344
+ bool "Compex WPJ344 board support"
+ select SOC_AS934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_WPJ558
+ bool "Compex WPJ558 board support"
+ select SOC_QCA955X
@ -1269,7 +1280,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
@@ -83,6 +1061,97 @@ config ATH79_MACH_UBNT_XM
@@ -83,6 +1071,97 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@ -1367,7 +1378,7 @@
endmenu
config SOC_AR71XX
@@ -124,7 +1193,10 @@ config ATH79_DEV_DSA
@@ -124,7 +1203,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@ -1379,7 +1390,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
@@ -154,6 +1226,11 @@ config ATH79_PCI_ATH9K_FIXUP
@@ -154,6 +1236,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
@ -1393,7 +1404,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -38,9 +38,119 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
@@ -38,9 +48,120 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@ -1502,7 +1513,8 @@
+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
+obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o
+obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o