KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
17697 commits 3 branches 0 tags 154 MiB
Commit graph

6666 commits

Author SHA1 Message Date
Florian Fainelli
0fb1c2d537 bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26875
 2011-05-11 13:33:45 +00:00
Florian Fainelli
c6af9c23b7 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26874
 2011-05-11 13:33:41 +00:00
Florian Fainelli
4ea316216a switch to 2.6.38 
SVN-Revision: 26873
 2011-05-11 13:33:34 +00:00
Florian Fainelli
3fc33726a5 add missing 2.6.38 touchscreen config symbols 
SVN-Revision: 26872
 2011-05-11 13:33:30 +00:00
John Crispin
60c125b8e6 (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC 
This patch adds 802.1Q VLAN support for the ADM6996M chip.

The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.

The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].

Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt

Signed-of-By: Peter Lebbing <peter@digitalbrains.com>

SVN-Revision: 26865
 2011-05-09 15:21:58 +00:00
Gabor Juhos
9b5036a29d ar71xx: populate LED3 on the JA76PF board 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

SVN-Revision: 26862
 2011-05-08 21:38:51 +00:00
Gabor Juhos
b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL 
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
 2011-05-08 21:38:49 +00:00
Gabor Juhos
858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs 
SVN-Revision: 26860
 2011-05-08 21:38:48 +00:00
Gabor Juhos
869f3cb718 ar71xx: remove superfluous fifo_cfg overrides 
SVN-Revision: 26859
 2011-05-08 21:38:46 +00:00
Travis Kemen
bc121d5706 ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht 
SVN-Revision: 26858
 2011-05-08 17:08:06 +00:00
Gabor Juhos
5d77f370d6 ar71xx: ag71xx: make switch register access atomic 
Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856
 2011-05-08 16:32:53 +00:00
Gabor Juhos
3711658281 ar71xx: ag71xx: fix section mismatch warnings 
The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855
 2011-05-08 13:30:36 +00:00
Gabor Juhos
ef53029870 ar71xx: ag71xx: fix build error if debugfs is enabled 
SVN-Revision: 26854
 2011-05-08 13:30:26 +00:00
Hauke Mehrtens
732abc44cc brcm47xx: update patches 
SVN-Revision: 26846
 2011-05-07 12:49:17 +00:00
Gabor Juhos
8b67d748cb ar71xx: ag71xx: add debugfs entry for [rt]x_ring 
SVN-Revision: 26845
 2011-05-07 12:40:34 +00:00
Gabor Juhos
2166432ba0 ar71xx: ag71xx: add timestamps to ag71xx_buf 
SVN-Revision: 26844
 2011-05-07 12:40:28 +00:00
Gabor Juhos
896e1d1ab4 ar71xx: ag71xx: use dynamically allocated buffer for napi_stats 
SVN-Revision: 26843
 2011-05-07 12:40:26 +00:00
Gabor Juhos
a6708d20d1 ar71xx: ag71xx: use debugfs_remove_recursive 
SVN-Revision: 26842
 2011-05-07 12:40:25 +00:00
Gabor Juhos
c39e5b9360 ar71xx: override wmac device name for the AR934x SoCs 
SVN-Revision: 26840
 2011-05-07 09:23:32 +00:00
Florian Fainelli
fbbe154a48 remove useless patches 
SVN-Revision: 26837
 2011-05-06 12:37:40 +00:00
Florian Fainelli
de02a2795b fill maintainer infos for a couple of targets 
SVN-Revision: 26836
 2011-05-06 12:37:36 +00:00
Florian Fainelli
1adaa8790d update to 2.6.38.2 
SVN-Revision: 26833
 2011-05-05 16:35:44 +00:00
Florian Fainelli
fd33dffe60 add missing 2.6.38 symbols 
SVN-Revision: 26832
 2011-05-05 16:35:40 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
SVN-Revision: 26829
 2011-05-05 14:05:21 +00:00
Hauke Mehrtens
54fb8868fa brcm47xx: fix typo in patch 
SVN-Revision: 26828
 2011-05-05 13:18:35 +00:00
Alexandros C. Couloumbis
7fb06ce6cd linux/ar71xx: add some missing symbols for nand/yaffs targets 
SVN-Revision: 26827
 2011-05-05 07:19:46 +00:00
Alexandros C. Couloumbis
c27ffb1912 linux/generic: port yaffs to 2.6.39 
SVN-Revision: 26818
 2011-05-04 09:35:06 +00:00
Alexandros C. Couloumbis
67339c1329 linux/rb532: use kernel and initramfs tags on image generation 
SVN-Revision: 26817
 2011-05-04 08:47:00 +00:00
Jo-Philipp Wich
ae5435adc9 geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform. 
SVN-Revision: 26811
 2011-05-03 21:18:12 +00:00
Florian Fainelli
a18ec3c37e update to 2.6.38 
SVN-Revision: 26803
 2011-05-02 07:57:25 +00:00
Felix Fietkau
af53fa1d91 cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver 
SVN-Revision: 26802
 2011-05-02 00:28:30 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
 2011-05-01 20:28:35 +00:00
Felix Fietkau
f9a92812cf cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k 
SVN-Revision: 26797
 2011-05-01 15:53:56 +00:00
Felix Fietkau
cbc75a9c70 ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config 
SVN-Revision: 26779
 2011-04-28 21:27:42 +00:00
Felix Fietkau
eb270c4d33 ar8316: automatically detect whether port4 is used as PHY or as a switch port 
SVN-Revision: 26778
 2011-04-28 21:27:37 +00:00
Felix Fietkau
36aecb08b8 ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu) 
SVN-Revision: 26777
 2011-04-28 19:30:49 +00:00
Felix Fietkau
2336d4b438 ar8216: support AR8316 rev 0 devices 
SVN-Revision: 26776
 2011-04-28 19:30:43 +00:00
Alexandros C. Couloumbis
8b7a516fa8 linux/atheros: add 2.6.38 preliminary support 
SVN-Revision: 26772
 2011-04-27 17:18:03 +00:00
Felix Fietkau
9e8cd78944 swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK 
SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26770
 2011-04-26 23:05:29 +00:00
Alexandros C. Couloumbis
edfcbe5705 linux/adm5120: update wget2nand script 
SVN-Revision: 26748
 2011-04-21 13:18:33 +00:00
Alexandros C. Couloumbis
f13581eedb linux/ar71xx: update wget2nand script 
SVN-Revision: 26747
 2011-04-21 12:38:25 +00:00
Alexandros C. Couloumbis
015b010f90 linux/ar71xx: add 2.6.38 preliminary support 
SVN-Revision: 26746
 2011-04-21 11:45:23 +00:00
Felix Fietkau
a2687e8d6d uml: fix the kernel config name override 
SVN-Revision: 26715
 2011-04-17 21:47:49 +00:00
Felix Fietkau
ae51f1972f x86: remove 2.6.35 patches 
SVN-Revision: 26710
 2011-04-17 18:39:50 +00:00
Felix Fietkau
1fcd26091b brcm63xx: remove patches/configs for 2.6.35 
SVN-Revision: 26709
 2011-04-17 18:39:46 +00:00
Felix Fietkau
8566daa5df au1000: remove patches/configs for 2.6.35 
SVN-Revision: 26708
 2011-04-17 18:39:42 +00:00
Felix Fietkau
f5d3d0e7d8 ar7: remove patches/configs for old kernel versions 
SVN-Revision: 26707
 2011-04-17 18:39:38 +00:00
Felix Fietkau
64f67b9c2a adm5120: remove patches/configs for unused kernel versions 
SVN-Revision: 26706
 2011-04-17 18:39:32 +00:00
Felix Fietkau
ede6b0d360 rootfs_split: Allow using MTDPART_OFS_APPEND macro for offset of rootfs. 
Use offset from struct mtd_part instead of struct mtd_partition for defining
the new partitions. This enables the usage of MTDPART_OFS_APPEND macro in
struct mtd_partition.

Signed-off-by: Jochen Friedrich <jochen@scram.de>

SVN-Revision: 26705
 2011-04-17 18:32:28 +00:00
Felix Fietkau
5a0df036b0 Remove 2.6.35. It's not used anymore. 
Signed-off-by: Jochen Friedrich <jochen@scram.de>

SVN-Revision: 26704
 2011-04-17 18:32:21 +00:00