Sven Eckelmann
8010e8a370
ar71xx: add kernel support for the OpenMesh OM2P-HSv3
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
823cea2d5d
ar71xx: Allow OpenMesh CE images with more than 3 files
...
The CE image format used by OpenMesh can contain extra blocks which
are not used for flashing. Only the first three embedded images
(fwupgrade.cfg, kernel, rootfs) are required in this order to successfully
flash an image via sysupgrade. All extra embedded images should be ignored
for the available devices.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
d1b4a8cfcf
ar71xx: Move OpenMesh image target validation into subfunction
...
The platform_check_image_openmesh function used break statements to signal
that the board name matched the image target. This worked because the
sysupgrade binary checked the image inside a loop. The break statement
stopped the loop and skipped any additional check.
Instead the check should be done without such sideeffects by simply
combining the board names and image targets. Only a mismatch should cause a
negative result for the caller and skipping of the additional checks.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:23 +02:00
Sven Eckelmann
6150c15ad1
ar71xx: Generate sysupgrade images for OpenMesh devices
...
Some OpenWrt based firmwares like Gluon expect that a sysupgrade image
exists when a device firmware can be updated via sysupgrade. This image
wasn't created until now because OpenMesh devices use the same image for
factory and sysupgrade flash. Copying the image from *factory.bin to
*sysupgrade.bin is therefore enough to make the sysupgrade functionality
visible.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:22 +02:00
Sven Eckelmann
9b6b75d09d
ar71xx: Add support for initramfs images for OpenMesh devices
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:22 +02:00
Felix Fietkau
f85e5e6778
ar71xx: move nand device image definitions to a separate file
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:22 +02:00
Felix Fietkau
dcc2ea3cf5
ar71xx: move generic device image definitions to a separate file
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:22 +02:00
Felix Fietkau
054df4fda4
ar71xx: split ubnt image building code into a separate file
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:21 +02:00
Felix Fietkau
736fc38d33
ar71xx: split legacy image building code into a separate file
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:21 +02:00
Felix Fietkau
64b8bb3b69
ar71xx: split tp-link image building code into a separate file
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:19:21 +02:00
Russell Senior
0fd183c155
x86_64: enable mmc to support booting off sd
...
Improved support for PCEngines APU
Signed-off-by: Russell Senior <russell@personaltelco.net>
2016-05-23 12:17:55 +02:00
Russell Senior
f89a20a89a
ath25: update kernel from 3.18 to 4.4
...
Summary of changes:
* moved config-3.18 to config-4.4 and patches-3.18 to patches-4.4
* removed most of the first two patches, that seem to be upstream already
* changed deprecated/removed IRQF_DISABLED to zero following examples in upstream kernel patches
* added config line to disable device-tree to satisfy kernel configuration
* add new image generation code
Build tested and run tested on an Accton MR3201A.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:56:38 +02:00
John Crispin
c7efbd7dbb
ramips: Add specific compatible properties for esw
...
Currently, for RT5350 and MT7628, esw is marked as compatible with
"ralink,rt3050-esw". While this is true, the switches within RT5350
and MT7628 actually support more functionality than the RT3050 switch.
One such example is per-VLAN untagging, which is an important feature.
RT3352 is another example of this, but it already has an additional
compatible property, which allows to differentiate it from RT3050.
This commit adds such more specific properties for RT5350 and MT7628
as well.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-23 11:28:59 +02:00
John Crispin
f5f173e2b7
mediatek: update patches
...
* fixes NAND
* adds latest ethernet patches
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:20:20 +02:00
Mathias Kresin
abfdddfb3c
lantiq: VG3503J - use the 11G firmware
...
Use the 11G firmware for the phys as the oem firmware does.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:25 +02:00
Mathias Kresin
9d0608eef3
lantiq: VG3503J - merge profiles
...
The only difference between the VG3503J profiles is the version of the
gphy firmware that gets loaded. This can be handled perfect fine in one
device tree source file.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
21bdd79b33
lantiq: disable phy led complex (test) functions by default
...
They can be added using the phy led device tree bindings if required.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:23 +02:00
John Crispin
9e41c3f54e
imx6: move profile definitions to the image/Makefile
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:23 +02:00
Cezary Jackiewicz
2965430999
ramips: cleanup for Hame MPR-A2
...
- disable all ethernet ports except port 0 on MPR-A2
Port 0 is the only ethernet port on this router, so disable all other PHYs in order to save power.
- don't use a VLAN for the single ethernet port of the MPR-A2
Like A5-V11, this router only has one ethernet port.
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-05-23 11:03:23 +02:00
Felix Fietkau
df98acc6a1
mvebu: backport upstream ethernet driver improvements and enable buffer manager support
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 16:04:37 +02:00
Felix Fietkau
e90245237c
oxnas: use global UBIFS_OPTS, all profiles use the same settings
...
Fixes build when selecting a device profile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 15:58:41 +02:00
Felix Fietkau
848cacb21d
mvebu: fix device I/O coherency issues
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 12:34:06 +02:00
Felix Fietkau
638a5682e1
kernel: remove bogus CONFIG_LOG_BUF_SHIFT overrides
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:35:41 +02:00
Felix Fietkau
a080b10331
mvebu: correct patch name of the crypto sram fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:32:30 +02:00
Felix Fietkau
629636dd25
mvebu: fix bus ranges for the crypto processor sram
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 22:06:46 +02:00
Felix Fietkau
22cc151e93
mvebu: tune kernel config for performance
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:07 +02:00
Felix Fietkau
f849c2c832
mvebu: enable core drivers in the kernel config instead of packaging them
...
Simplify profile package selection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:06 +02:00
Felix Fietkau
a5a3b59bf5
mvebu: add some more flash driver fixes
...
Disable marvell,nand-keep-config property on WRT1900AC to allow the
flash driver to properly probe the chip
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
008579f2ff
mvebu: rename recently added flash driver fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
f0dd81043c
mvebu: prevent crash in the flash driver in case of a spurious interrupt
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:38 +02:00
Felix Fietkau
566343246f
mvebu: backport an upstream NAND flash driver fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:38 +02:00
Felix Fietkau
5166732a4e
ramips: use green power LED as status indicator for Buffalo WSR-1166 and WSR-600
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 15:16:37 +02:00
Felix Fietkau
72568ea3bd
ar71xx: remove linux 4.1 support
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 10:02:29 +02:00
Álvaro Fernández Rojas
8998dc14a5
brcm2708: fix SUBTARGET checks for bcm2709/bcm2710
...
This regression was introduced in commit cf58007a
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-20 19:07:36 +02:00
Felix Fietkau
24b8d31bad
mvebu: update to linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:38:10 +02:00
Felix Fietkau
8eab383782
mvebu: fix portability issues in the image makefile code
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:38:10 +02:00
Felix Fietkau
cf58007abc
bcm2708: explicitly check for SUBTARGET instead of using the device SUBTARGETS variable
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:37:52 +02:00
Felix Fietkau
323d37cbb6
arm64: update to linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:25:41 +02:00
Felix Fietkau
647e6379af
kernel: add missing config symbols for 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:25:40 +02:00
Felix Fietkau
82dcbec727
ramips: remove fake vlan rx offload from ethernet driver
...
The network stack does not need it to do GRO
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:01:21 +02:00
Alexander Couzens
94e23bf740
ar71xx/cpe510: enable LNA for CPE210/220/510/520
...
The LNA improves the rx path. Within a simple test setup
it improved the signal from -60dbm to -40dbm.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-20 13:18:57 +02:00
Daniel Golle
118b5ae7b2
oxnas: drop compatibility with old kernels from mach-ox820
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-20 08:48:19 +02:00
Daniel Golle
97ce23c347
oxnas: drop compatibility with old kernels from pinctrl
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-20 08:48:19 +02:00
Daniel Golle
f90f379a7f
oxnas: drop compatibility with old kernels from irq-rps
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-20 08:48:18 +02:00
Daniel Golle
53a9809080
oxnas: drop compatibility with old kernels from dwmac-oxnas
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-20 08:48:18 +02:00
Daniel Golle
c43635bc5c
oxnas: sync 010-arm_introduce-dma-fiq-irq-broadcast with cns3xxx
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-20 08:48:18 +02:00
Álvaro Fernández Rojas
c4664b0f91
kernel: update kernel 4.4 to version 4.4.11
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-19 21:08:06 +02:00
Felix Fietkau
2c83003143
kernel: fix unaligned access issue in the bridge multicast-to-unicast patch
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 17:55:54 +02:00
Álvaro Fernández Rojas
3bc90f9626
ramips: use backported upstream patches
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-19 17:48:41 +02:00
Felix Fietkau
9d37095fd0
ar71xx: fix a remaining unaligned access issue
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 16:56:34 +02:00
Felix Fietkau
934daa7b50
kirkwood: move ubi/ubifs options to the image makefile
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 15:18:12 +02:00
Felix Fietkau
311faaa1bd
lantiq: move ubi/ubifs options to the image makefile
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 15:13:29 +02:00
Daniel Dickinson
9fd8e55132
imagebuilder: Fix sorting package list breaks opkg dependency handling for provides
...
When imagebuild sorts package lists it breaks opkg's ability to realize
that a providers for a Provides has already been installed, when the sort
results in the provider being later in the list of packages that a package
which depends on a Provides (and hence the provider is not yet installed
for opkg to realize the provider was available doesn't not handle the case
of a package that is to be installed satisfying a dependency, only one that
is already installed (or which it schedules to be installed, which in the
absence of an installed provider is whichever provider happens to be the
default)
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-05-18 23:53:01 +02:00
Álvaro Fernández Rojas
638d509817
ramips: fix pinctrl regression
...
This regression was introduced in commit 9195d8da
.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-18 22:08:39 +02:00
Álvaro Fernández Rojas
29db5cae43
ramips: fix spidev generic nodes
...
Use linux,spidev compatible string.
Move MZK-DP150N spidev to spi1 node.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-18 22:08:39 +02:00
Felix Fietkau
98204836a4
ar71xx: fix register address calculation for DDR flushing
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-18 18:06:50 +02:00
Álvaro Fernández Rojas
021c893658
ramips: fix size-cells on spi nodes
...
size-cells should be 0 in order to avoid dummy values in reg properties.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-18 16:57:39 +02:00
Felix Fietkau
b8a129638e
kernel: add back the macronix software protection disable patch
...
It was accidentally left out when 4.4 support was added
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-18 15:22:26 +02:00
Rafał Miłecki
01714243b9
bcm53xx: drop Copyright header from two of my bash scripts
...
Both scripts modified by this patch were added by me. First of all I
incorrectly added OpenWrt as Copyright holder. It was wrong because:
1) I simply can't transfer my moral rights according to the Polish law
2) Transfering copyrights (economic rights) requires an agreement which
I didn't sign with OpenWrt(.org).
Other than that I don't find these trivial scripts important enough to
put info about *my* copyrights in a header so this patch just drops them
completely.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-18 08:35:00 +02:00
John Crispin
2a6b899589
ramips: fix 8M WT3020 image creation
...
fix image size for 8M version : 4M -> 8M
Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
2016-05-16 20:59:06 +02:00
Daniel Golle
055d8d9c61
oxnas: move target-specific modules into target's modules.mk
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-17 17:26:05 +02:00
Felix Fietkau
17de501daa
kernel: backport patches for fq_codel queue memory limit support
...
Use it to replace the reduction in max packets/flows
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-16 19:54:50 +02:00
Felix Fietkau
40f08abecf
ar71xx: fix typo in pci memory window initialization fix
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-16 19:52:42 +02:00
Daniel Golle
70eb03469f
oxnas: reorganize image build code and nuke profiles
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-16 18:00:34 +02:00
Jo-Philipp Wich
d4e552ba16
kernel: fix yaffs2 build with kernel 4.4
...
Fix YAFFS2 build after upstream nd_set_link() removal by importing
http://permalink.gmane.org/gmane.linux.embedded.yocto.linux-yocto/4373
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-16 15:49:25 +02:00
Cezary Jackiewicz
5521651863
ar71xx: typo in jjplus profile
...
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-05-16 11:25:28 +02:00
John Crispin
1d9c0b2409
ramips: fix ArcherC20i image creation - 3rd try
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-15 11:59:43 +02:00
Felix Fietkau
acd7a34494
kernel: enable CONFIG_PANIC_ON_OOPS by default
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 21:28:41 +02:00
Felix Fietkau
2ecf3af576
kernel: set CONFIG_PANIC_TIMEOUT by default
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 21:28:41 +02:00
Felix Fietkau
f4c4d501e4
build: remove profile kernel/build system config override support
...
It has been unused for years
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:40 +02:00
Felix Fietkau
7a67b0e362
ar71xx: update to linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Felix Fietkau
9c556fe73e
ar71xx: register the gpio driver earlier
...
This allows gpio requests from mach files to succeed.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Felix Fietkau
313474e693
ar71xx: fix a PCI initialization issue in Linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Felix Fietkau
5b34dffcbd
ar71xx: fix DDR write buffer flushing issues with 4.4
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Felix Fietkau
df93d53a4b
mac80211: update to wireless-testing 2016-05-12
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Felix Fietkau
ce21e18d57
kernel: fix a compiler warning on 64 bit systems
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 17:12:01 +02:00
Felix Fietkau
ce009d16a1
ramips: fix Archer C20i image build
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 14:11:26 +02:00
Cezary Jackiewicz
0b45bec22c
ar71xx: add support for TP-LINK TL-WR842N/ND v3
...
- CPU QCA9531-BL3A
- RAM: 64MB
- flash: 16MB
- USB
AP143 platform, similar to tl-wr841n v10/v11, but with USB
Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-05-14 21:45:16 +02:00
John Crispin
5d0eff9801
ramips: set default profile to priority 1
...
doing so will sort all profiles alphabetically
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-14 21:27:16 +02:00
John Crispin
cc831e23e1
ar71xx: add proper support for Archer-C7 V2
...
This has minor differences to the V1
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-14 21:26:08 +02:00
John Crispin
7697aced24
ramips: fix ArcherC20i image creation
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-14 21:26:05 +02:00
Felix Fietkau
27dfe64887
ramips/mt7621: remove cflags override
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-14 17:58:43 +02:00
Felix Fietkau
bceafad7c2
kernel: add missing config symbol
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-14 17:58:43 +02:00
Álvaro Fernández Rojas
424a94d81a
brcm2708: convert to the new building system
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-14 13:25:08 +02:00
Álvaro Fernández Rojas
20b069c440
ramips: disable unused ethernet ports on VoCore
...
Only ports 0 and 4 are used so disable the other ones in order to save power.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-14 12:40:03 +02:00
Jo-Philipp Wich
45e0f8b826
arm64: add missing kconfig symbol
...
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-13 17:03:53 +02:00
Felix Fietkau
80f4988da3
target/imagebuilder: fix using new device profiles
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-13 16:32:36 +02:00
Felix Fietkau
fad8bdfa40
kernel: backport patches improving fq_codel drop behavior
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 21:04:50 +02:00
Felix Fietkau
26c137621f
kernel: remove out-of-tree patches for reducing qdisc truesize
...
The copy overhead can be quite expensive
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 20:51:55 +02:00
Felix Fietkau
75b069f505
kernel: fold codel default fix into main patch
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 20:44:16 +02:00
Felix Fietkau
7fab5dc486
ramips: fix indentation of Build/* template commands
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:49:38 +02:00
Felix Fietkau
98010ab489
kernel: remove ocf support, cryptodev-linux should be used instead
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:35:32 +02:00
John Crispin
f816472f78
ar71xx: Fix TP-LINK Archer-C5/C7 v2 rfkill
...
Fix ARCHER_C7_GPIO_BTN_RFKILL, which is attached to GPIO23
Signed-off-by: Lars Buerding <lb.wrt@metatux.net>
2016-05-12 03:29:36 +02:00
John Crispin
f10d2bb6d3
ramips: add wmac nodes to all mt7628/88 dts files
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
Andrew Yong
8c9b8d70b1
ramips: add status led for ZBT-WE826
...
Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-05-12 03:29:36 +02:00
John Crispin
4220cc3255
ramips: convert mt7620 to new image building code
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
John Crispin
ecbaaa401a
ramips: convert mt7688 to new image building code
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
John Crispin
0f12f32996
ramips: convert mt7628 to new image building code
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
John Crispin
825717d450
ramips: convert mt7621 to new image building code
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
John Crispin
a55f0c32fa
ramips: convert rt2880 to new image building code
...
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00