KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
26656 commits 3 branches 0 tags 154 MiB
Commit graph

11632 commits

Author SHA1 Message Date
Jonas Gorski
0d120f42da brcm63xx: add preliminary support for 3.13 
Add support for 3.13 as a development kernel. Mostly untested, only net
booted. If flashed may brick your router or kill your cat.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39746
 2014-02-24 15:54:12 +00:00
Jonas Gorski
8ffe7e9d41 kernel: add missing config symbol to 3.13 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39745
 2014-02-24 15:53:58 +00:00
Gabor Juhos
8a87474b6e x86/rdc: remove old kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39737
 2014-02-23 21:16:04 +00:00
Gabor Juhos
9350e4cafa x86/rdc: switch to 3.10 and add broken flag 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39736
 2014-02-23 21:16:03 +00:00
Gabor Juhos
1329a18eec x86/rdc: add config for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39735
 2014-02-23 21:16:02 +00:00
Gabor Juhos
6d530eef5d x86: fix MTD API usage in the RDC specific board patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39734
 2014-02-23 21:15:56 +00:00
Hauke Mehrtens
5b388e5716 brcm47xx: b44: some fixes in combination with the switch 
Let the switch start the carrier and set the duplex mode independently
if this nic is up of not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39733
 2014-02-23 18:51:56 +00:00
Gabor Juhos
a90ec7a0ef x86/olpc: remove old kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39732
 2014-02-23 18:20:32 +00:00
Gabor Juhos
a485bd350b x86/olpc: switch to 3.10 and add broken flag 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39731
 2014-02-23 18:20:30 +00:00
Gabor Juhos
543fc517f4 x86/olpc: add config for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39730
 2014-02-23 18:20:29 +00:00
Gabor Juhos
c384015892 x86/net5501: remove old kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39729
 2014-02-23 18:09:33 +00:00
Gabor Juhos
3488372fa7 x86/net5501: switch to 3.10 and add broken flag 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39728
 2014-02-23 18:09:32 +00:00
Gabor Juhos
8dc438ea7f x86/net5501: add config for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39727
 2014-02-23 18:09:31 +00:00
Hauke Mehrtens
f587bacc26 brcm47xx: b44: start the phy 
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39719
 2014-02-23 16:58:12 +00:00
Hauke Mehrtens
15a7efa119 brcm47xx: fix detection of some Linksys WRT54G* devices 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39718
 2014-02-23 15:57:37 +00:00
Gabor Juhos
455ee13faf x86/thincan: remove old kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39717
 2014-02-23 13:07:24 +00:00
Gabor Juhos
d5ab9b12bf x86/thincan: switch to 3.10 and add broken flag 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39716
 2014-02-23 13:07:23 +00:00
Gabor Juhos
b8061d4e8e x86/thincan: add config for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39715
 2014-02-23 13:07:22 +00:00
Gabor Juhos
4ae644c137 x86/xen_domu: remove old kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39714
 2014-02-23 13:00:23 +00:00
Gabor Juhos
24ef414bec x86/xen_domu: switch to 3.10 and add broken flag 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39713
 2014-02-23 13:00:21 +00:00
Gabor Juhos
f333739c24 x86/xen_domu: add config for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39712
 2014-02-23 13:00:16 +00:00
Gabor Juhos
c0405b152f x86/geos: remove old kernel configs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39711
 2014-02-23 12:50:19 +00:00
Gabor Juhos
a7db713477 x86/geos: switch to 3.10 and add broken flag 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39710
 2014-02-23 12:50:18 +00:00
Gabor Juhos
944edb47f9 x86/geos: add config for 3.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39709
 2014-02-23 12:50:16 +00:00
Gabor Juhos
b5fdd769f0 brcm63xx: update LINUX_VERSION to 3.10.32 
Missed from the previous comit.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39708
 2014-02-23 11:07:58 +00:00
Gabor Juhos
f677b1bc7e kernel: update 3.10 to 3.10.32 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
 2014-02-23 10:59:40 +00:00
Gabor Juhos
590bafe3de ar71xx: define status LED for the RB91x boards 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39705
 2014-02-23 08:11:54 +00:00
Gabor Juhos
da2f3c1448 ar71xx: rb91x: register GPIO LEDs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39704
 2014-02-23 08:11:53 +00:00
Gabor Juhos
14d95026b2 ar71xx: rb91x: add SPI device for the serial shift register 
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.

Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39703
 2014-02-23 08:11:52 +00:00
Gabor Juhos
7b89005f0d ar71xx/mikrotik: enable the 74x164 GPIO driver 
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39702
 2014-02-23 08:11:50 +00:00
Gabor Juhos
5f224ef8a3 ar71xx: improve platform device support in the gpio-74x164 driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39701
 2014-02-23 08:11:49 +00:00
Gabor Juhos
3d906ac6ac ar71xx: rb91x-nand: rewrite to use GPIO API 
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39700
 2014-02-23 07:19:32 +00:00
Gabor Juhos
8fea668cb7 ar71xx: rb91x: register a gpio-latch platform device 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39699
 2014-02-22 18:05:32 +00:00
Gabor Juhos
da5caba072 ar71xx/mikrotik: enable the GPIO latch driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39698
 2014-02-22 18:05:31 +00:00
Gabor Juhos
ab08c40487 ar71xx: add a generic GPIO latch driver 
It will be used for the Mikrotik boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39697
 2014-02-22 18:05:29 +00:00
Gabor Juhos
be18a3849b ar71xx/mikrotik: enable small sector erase in the m25p80 driver 
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39696
 2014-02-22 16:26:55 +00:00
Gabor Juhos
b7539ab109 ar71xx: spi-ath79: fix initial GPIO CS line setup 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39695
 2014-02-22 16:17:28 +00:00
Gabor Juhos
3e6c7ed4f2 ar71xx: refresh unaligned access hacks patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39694
 2014-02-22 16:17:27 +00:00
Nicolas Thill
86f5a9cf78 target/sunxi: add dependency on sunxi to kmod-wdt-sunxi 
SVN-Revision: 39693
 2014-02-22 15:51:11 +00:00
Felix Fietkau
7a8f13f33c gianfar: Fix reported number of sent bytes to BQL 
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>

SVN-Revision: 39692
 2014-02-22 14:42:48 +00:00
Jonas Gorski
c1f397e1e1 b53: Make b53_switch_init static 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39683
 2014-02-22 11:16:58 +00:00
Jonas Gorski
9eb60826f2 b53: Add BCM53128 switch support 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39682
 2014-02-22 11:16:56 +00:00
Jonas Gorski
b8ed6534ca brcm63xx: fix RG100A/DB120 usb port number 
Set usbh ports to 2 to fix #15007.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39681
 2014-02-22 11:16:52 +00:00
Jonas Gorski
4a2f87bce0 brcm63xx: fix number of usb ports for HW556 variants 
Don't only fix up the fallback board, but also all three variants.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39680
 2014-02-22 11:16:50 +00:00
Jonas Gorski
ece12908a8 brcm63xx: add initial support for BCM963268BU_P300 reference board 
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39679
 2014-02-22 11:16:48 +00:00
Jonas Gorski
f6c4b1eb29 brcm63xx: add VW6339GU support 
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39678
 2014-02-22 11:16:46 +00:00
Jonas Gorski
60edb75e47 brcm63xx: fix number of switch ports for BCM63168/63268 
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39677
 2014-02-22 11:16:44 +00:00
Jonas Gorski
edbfb81b56 brcm63xx: F@ST2504n board support (image, base-files) 
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39676
 2014-02-22 11:16:42 +00:00
Jonas Gorski
84dc1f1209 brcm63xx: F@ST2504n board support 
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4729/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39675
 2014-02-22 11:16:40 +00:00
Jonas Gorski
ce655b93cd brcm63xx: add support for Asmax AR 1004g router 
Support for Asmax AR 1004g router

Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39674
 2014-02-22 11:16:38 +00:00