Commit graph

300 commits

Author SHA1 Message Date
Luka Perkov
0b2cbeca7a mvsw61xx: clean up and expand register definitions
- eliminate MV_CPUPORT; not necessary since we define
  the CPU port(s) via Device Tree

- add STU and expand VTU operations

- update register names to match those of 88E61xx rather than
  mvswitch's 88E6060

- use more consistent formatting

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43937
2015-01-11 17:20:06 +00:00
Luka Perkov
1e39f3aef8 mvsw61xx: rework chip recognition
Recognizes 88E6171/6172/6176 at the moment.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43936
2015-01-11 17:20:03 +00:00
Luka Perkov
a1872182bb mvsw6171: rename to 'mvsw61xx'
In preparation for properly supporting switches
beyond the 88E6171.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43935
2015-01-11 17:19:58 +00:00
Felix Fietkau
1cbf0fbcb4 ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43845
2015-01-05 13:03:07 +00:00
Felix Fietkau
cc02d4c72d ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
Move several structure definitions and #defines from ar8216.c
to ar8216.h and move AR8327/AR8337 header stuff into a new
header file ar8327.h.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43844
2015-01-05 13:02:57 +00:00
Felix Fietkau
5506420980 kernel: remove openwrt micrel.c (replaced by upstream driver)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43762
2014-12-22 14:37:07 +00:00
Luka Perkov
0847247129 mvsw6171: note support for 88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43753
2014-12-19 22:02:59 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
2014-12-18 11:28:20 +00:00
Felix Fietkau
5b16fd1bf8 ar8216: enable cpu port to receive arp and broadcast frames for ar8236
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43668
2014-12-12 16:23:29 +00:00
John Crispin
9b5f583906 kernel: add driver for Marvell 88E6171 switch
This is a swconfig driver for the Marvell 88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43486
2014-12-01 21:30:35 +00:00
John Crispin
ecd27db757 ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43471
2014-12-01 16:15:08 +00:00
John Crispin
ae15531bd2 ar8216: factor out mii_lo_first to ar8xxx_chip
Factor out mii_lo_first to ar8xxx_chip.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43470
2014-12-01 16:15:02 +00:00
John Crispin
ea9324f3d3 ar8216: factor out chip-specific data structures from ar8xxx_priv
Factor out chip-specific data structures from ar8xxx_priv.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43469
2014-12-01 16:14:54 +00:00
John Crispin
a3b651635f ar8216: factor out set_mirror_regs to ar8xxx_chip
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43468
2014-12-01 16:14:43 +00:00
John Crispin
b82a08f5b6 ar8216: factor out mib_func to ar8xxx_chip
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43467
2014-12-01 16:14:39 +00:00
John Crispin
af003867b1 ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43466
2014-12-01 16:14:32 +00:00
Felix Fietkau
14db2826ad ar8216: suppress PHY reset for linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43410
2014-11-27 18:26:06 +00:00
Felix Fietkau
35902404fc ar8216: Fix issue with autoneg being disabled under 3.14, revert 43332
Patch reverts 43332 which seems to cause issues with VLAN functionality.
Add a specific check to check whether ANEG is still enabled and re-enable
it if necessary. Disable generic phy soft reset for kernel >=3.16.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43356
2014-11-24 09:33:48 +00:00
Felix Fietkau
c9340fd8a9 ar8216: Use generic hw_init from ar8236 for ar8216 too
We should make sure that also for ar8216 hw gets initialized.
For ar8216 hw_init is a dummy currently. The hw_init used for ar8236
should be generic enough to be usable with ar8216 too.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43334
2014-11-20 15:19:15 +00:00
Felix Fietkau
0178b516a2 ar8216: simplify PHY fixup/init
Move the PHY fixup call to the PHY init loop.
Use ar8xxx_has_gige in the PHY init instead of passing the gigE
capability via function parameter.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43333
2014-11-20 15:19:04 +00:00
Felix Fietkau
43e3e88379 ar8216: use genphy_config_aneg also for PHY 0
Kernel 3.14 introduced a switch reset in phy_init_hw in drivers/net/phy
causing BMCR_ANENABLE to get cleared.

Due to the fact that ar8xxx_phy_config_aneg does nothing for
PHY 0 autonegatiation support remains disabled.
This can cause ports to operate at 10MBit/half-duplex only.

Fix this by calling genphy_config_aneg for PHY 0 too as
genphy_config_aneg sets BMCR_ANENABLE if it's not yet set.
Fixes: ticket 17800

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43332
2014-11-19 20:18:01 +00:00
Felix Fietkau
898712f43f ar8216: factor out PHY init code into a generic function
PHY init code in the switch-specific hw_init functions is mainly
identical. Factor it out into a generic ar8xxx_phy_init function.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43331
2014-11-19 20:17:52 +00:00
Felix Fietkau
20baeb5595 ar8216: introduce fixup_phys callback in ar8xxx_chip
Move phy fixup code from the chip-specific hw_init functions into a
fixup_phys callback.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43330
2014-11-19 20:17:43 +00:00
Felix Fietkau
37fefea79b ar8216: after a switch reset poll until BCMR_RESET is cleared
Currently there is a fixed 1000ms wait time after the switch was reset.
Most if not all switches need much less time to perform a reset.
Therefore replace the fixed wait time with polling for BMCR_RESET to
be cleared.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43329
2014-11-19 20:17:37 +00:00
Felix Fietkau
6dcdc2bb05 ar8216: introduce global constant for number of PHYs
All supported switches have 5 PHYs. Currently partially 5 is hardcoded
and partially switch-specific constants exist.
Replace them with a global constant.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43328
2014-11-19 20:17:30 +00:00
John Crispin
76a54a424c ar8216: fix "unused variable" compiler warning
Most likely a copy & paste error when deriving ar8327_sw_set_ports
from ar8xxx_sw_set_ports.
Remove unused variable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43273
2014-11-14 17:06:09 +00:00
John Crispin
62107ff367 swconfig: last vs tail
sorry .....

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43107
2014-10-29 19:24:16 +00:00
John Crispin
ab5d70e046 swconfig: "swconfig list" shows devices in reverse order
Boards that have more than one swconfig enabled switch will show the devices in
reverse order when call swconfig list. Fix this by using list_add_tail().

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43106
2014-10-29 18:51:06 +00:00
Felix Fietkau
156b296b20 ar8216: set the pvid based on runtime state instead of port number to fix learning with enable_vlan = 0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42753
2014-10-02 20:00:41 +00:00
Felix Fietkau
38a8f5ae63 ar71xx: ar8216: tagged+untagged on ar8327 (#12181)
This allows tagged and untagged traffic together on the same port on ar8327
switch devices.

I looked at the first attempt to do this in r40777 (ar71xx: Fix tagged+untagged
operation on AR8327N (#12181)). I also set the vlan and port egress policies
like that change. But I change vlan_tagged in an less intrusive way. The
tagged/untagged decision is now based on the following rules:
- if vid != pvid then traffic is always tagged
- if vid == pvid then vlan_tagged stores if the traffic should be tagged

Tested on TP-Link WDR-3600 (ar8327N).

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>

SVN-Revision: 42653
2014-09-23 10:19:58 +00:00
Felix Fietkau
1c675ee9be ar71xx: ar8216: move policies, pvid to setup_port
This moves ingress, egress policy and pvid decisions to setup_port methods.
They arenow device type dependent.

This allows policy changes on only one device type which is needed to allow
tagged + untagged operation on ar8327.

Tested on TP-LINK WDR-3600 (ar8327N).

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>

SVN-Revision: 42652
2014-09-23 10:18:38 +00:00
John Crispin
de5fd0a189 ar8216: add new phyid 0x004dd043 (ar8326)
Used in ubiquity nanostation xw boards

SVN-Revision: 41635
2014-07-14 07:38:39 +00:00
Felix Fietkau
a17a58e310 ar8216: disable EEE by default on AR8327 to fix stability issues (#14597)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41577
2014-07-10 21:11:02 +00:00
Hauke Mehrtens
ed0dc1c97e b53: hardcode reset GPIO for Linksys WRT300N 1.1
According to the thread https://forum.openwrt.org/viewtopic.php?id=48281
b53 uses GPIO 7:
[    4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7
and causes device to self-reboot. GPIO 8 was found in CFE boot log:
"Reset switch via GPIO 8 ..."

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41526
2014-07-06 11:40:51 +00:00
Hauke Mehrtens
286ff7e322 adm6996: the GPIO interface for the adm6996l does not support switch statistics.
This patch deactivates the statistics, adds a missing lock
initialization and fixes a waring.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41511
2014-07-05 12:13:56 +00:00
Jo-Philipp Wich
f6e7074924 Revert "ar71xx: Fix tagged+untagged operation on AR8327N (#12181)"
Revert the tagged + untagged rework for now due to regressions in
vlan setup on certain AR83xx switches.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 40842
2014-05-24 17:04:12 +00:00
Jo-Philipp Wich
443b2dfe3c ar71xx: Fix tagged+untagged operation on AR8327N (#12181)
Replace the global "vlan_tagged" variable with an array storing the
tagging state per vlan.

The code was taken from #12181, tested and cleaned up by Saverio Proto
with additional bug fixes supplied by Álvaro Fernández.

Tested-by: Jo-Philipp Wich <jow@openwrt.org>
Signed-off-by: Saverio Proto <zioproto@gmail.com>
Signed-off-by: Álvaro Fernández <noltari@gmail.com>

SVN-Revision: 40777
2014-05-19 15:48:18 +00:00
Hauke Mehrtens
100e795bcc kernel: fix warning in swconfig.c with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40733
2014-05-08 21:52:19 +00:00
John Crispin
1b96cf30a9 linux/generic: add MIB counters and port status to ADM6996 switch
This patch adds port status information and MIB counters to the ADM6996
switch driver.

The driver supports also the older ADM6996L-variant, but I'm not able to
test this patch on that chip. According to the datasheet the same
registers exist there as well, so I think it should work, but any
feedback is appreciated.

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40542
2014-04-22 08:08:02 +00:00
John Crispin
3972b47458 revert: kernel: rtl8306: fix max pvid & remove port isolation
apparently this one was nt a good idea to merge

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40330
2014-03-30 10:04:55 +00:00
John Crispin
deba38f2a7 kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx
If the CPU port is not forced up, the link, at least on this board, is lost after
changes are applied. This makes sure that the link is restored. Regression tests
should confirm it doesn't break other boards.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40305
2014-03-30 09:15:16 +00:00
John Crispin
72cdb34ae8 kernel: rtl8306: fix max pvid & remove port isolation
- hide port pvid - vlan index relation
- switch initialises with vlans disabled so port isolation is not used
- remove special treatment of cpu port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40304
2014-03-30 09:15:11 +00:00
John Crispin
6a72dc4082 kernel: rtl8306: cosmetic changes for swconfig
Changes to:
- show the correct "enable_vlan" value under "Global attributes"
- show tagged ports under "Vlan: ports"
- use get_port_link method to report link status

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40303
2014-03-30 09:15:07 +00:00
Jonas Gorski
c1f397e1e1 b53: Make b53_switch_init static
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39683
2014-02-22 11:16:58 +00:00
Jonas Gorski
9eb60826f2 b53: Add BCM53128 switch support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39682
2014-02-22 11:16:56 +00:00
Luka Perkov
cde033f918 kernel: rtl8306: update reset function
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39589
2014-02-15 22:54:35 +00:00