openwrtv4/target/linux/generic/files/drivers/net/phy
Felix Fietkau 43e3e88379 ar8216: use genphy_config_aneg also for PHY 0
Kernel 3.14 introduced a switch reset in phy_init_hw in drivers/net/phy
causing BMCR_ANENABLE to get cleared.

Due to the fact that ar8xxx_phy_config_aneg does nothing for
PHY 0 autonegatiation support remains disabled.
This can cause ports to operate at 10MBit/half-duplex only.

Fix this by calling genphy_config_aneg for PHY 0 too as
genphy_config_aneg sets BMCR_ANENABLE if it's not yet set.
Fixes: ticket 17800

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43332
2014-11-19 20:18:01 +00:00
..
b53 b53: hardcode reset GPIO for Linksys WRT300N 1.1 2014-07-06 11:40:51 +00:00
adm6996.c adm6996: the GPIO interface for the adm6996l does not support switch statistics. 2014-07-05 12:13:56 +00:00
adm6996.h linux/generic: add MIB counters and port status to ADM6996 switch 2014-04-22 08:08:02 +00:00
ar8216.c ar8216: use genphy_config_aneg also for PHY 0 2014-11-19 20:18:01 +00:00
ar8216.h ar8216: introduce global constant for number of PHYs 2014-11-19 20:17:30 +00:00
ip17xx.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
micrel.c ar71xx: move micrel PHY driver to the generic linux target 2012-03-15 09:25:53 +00:00
mvswitch.c generic: mvswitch: add detach callback 2013-02-07 15:18:34 +00:00
mvswitch.h
psb6970.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
rtl8306.c revert: kernel: rtl8306: fix max pvid & remove port isolation 2014-03-30 10:04:55 +00:00
rtl8366_smi.c strict_strtoul is obsolete, use kstrtoul instead 2013-07-27 09:23:18 +00:00
rtl8366_smi.h linux: generic: rtl836*: fix compilation with !CONFIG_OF 2012-12-15 13:32:02 +00:00
rtl8366rb.c generic: add port mirroring/monitoring capability to rtl8366rb switch 2013-06-04 13:25:52 +00:00
rtl8366s.c fix rtl8366s OF binding 2013-04-12 18:56:05 +00:00
rtl8367.c rtl8367: add support for configuring the VLAN FID 2013-08-12 17:25:25 +00:00
rtl8367b.c generic: rtl8367: add compatible string with vendor prefix 2013-04-06 17:19:31 +00:00
swconfig.c swconfig: last vs tail 2014-10-29 19:24:16 +00:00
swconfig_leds.c ar71xx: swconfig: use the local helper to set LED brightness on link down 2014-01-26 16:46:21 +00:00