Commit graph

43127 commits

Author SHA1 Message Date
Tomasz Maciej Nowak
c288ad9c2b x86: make sysupgrade.tgz reachable again
Moving binding mount before check for saved sysupgrade configuration
made it unreachable. Fix it by moving binding mount after the check.

Fixes: f78b2616 (x86: mount writable bootfs)
Reported-by: Lucian Cristian <luci@powerneth.ro>
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-12-03 07:38:20 +01:00
Jo-Philipp Wich
9808bd2799 Revert "base-files: fwtool: Fix wrong checksum on combined-image with metadata"
This reverts commit 41770add03.

The fwtool_check_image() procedure is used by `sysupgrade --test` which must
not alter the image under test in any way.

Currently, when the LuCI ui or any other sysupgrade wrapper first invokes
sysupgrade --test to verify the compatibility of the image and then calculates
the sha256sum over it, the resulting checksum will differ from the original
image since the test invocation will implicitely strip the metadata trailer.

To properly fix the underlying issue, the combined image checksumming code
must be modified to skip the metadata trailer.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-02 16:05:44 +01:00
Mathias Kresin
78ca6a5578 ramips: merge relocate compile into build recipe
Compile the loader if the relocate-kernel image recipe is used and get
rid of the legacy build code to do so.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-30 09:04:29 +01:00
Pawel Dembicki
465d57370f ramips: specify "firmware" partition format in JBOOT devices
Specify firmware partition format by compatible string.

List of devices:
-DWR-116-A1
-DWR-118-A2
-DWR-512-B
-DWR-921-C1
-LR-25G001

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-11-30 00:22:04 +01:00
Pawel Dembicki
b5597d5cc9 kernel: add DT binding support to the jimage parser
It allows specifying jimage parser directly in the DT.

Tested on LAVA LR-25G001

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-11-30 00:22:04 +01:00
Valentín Kivachuk
30a7ab8f61 ramips: add support for MTC Wireless Router WR1201
MTC Wireless Router WR1201 is the OEM name of the board. It is also sold
rebranded as STRONG Dual Band Gigabit Router 1200.

Specification:
- SoC: MediaTek MT7621A (880 MHz)
- Flash: 16 MiB
- RAM: 128 MiB
- Wireless: 2.4Ghz(MT7602EN) and 5Ghz (MT7612EN)
- Ethernet speed: 10/100/1000
- Ethernet ports: 4+1
- 1x USB 3.0
- 1x microSD reader
- Serial baud rate of Bootloader and factory firmware: 57600

The OEM webinterface writes only as much bytes as listed in the
uImage header field to the flash. Also, the OEM webinterface
evaluates the name field of uImage header before flashing (the
string "WR1201_8_128")

To flash via webinterface, is mandatory to use first initramfs.bin
and after (from the OpenWrt) the sysupgrade.bin

Some notes:
- Some microSD will not work:

  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising SDIO card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising MMC card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising SDIO card
  mtk-sd 1e130000.sdhci: card claims to support voltages below defined range
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising MMC card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising SDIO card
  mtk-sd 1e130000.sdhci: no support for card's volts
  mmc0: error -22 whilst initialising MMC card

Signed-off-by: Valentín Kivachuk <vk18496@gmail.com>
2018-11-30 00:20:28 +01:00
Hans Dedecker
493c1d1766 odhcpd: update to latest git HEAD
d404c7e netlink: fix triggering of NETEV_ADDR6LIST_CHANGE event
ae6cf80 config: correctly break string for prefix filter

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-11-29 21:46:12 +01:00
INAGAKI Hiroshi
d70ec3008d ramips: specify "firmware" partition format
Specify firmware partition format by compatible string.

formats in ramips:

- denx,uimage
- tplink,firmware
- seama

It's unlikely but the firmware splitting might not work any longer for
the following boards, due to a custom header:

- EX2700: two uImage headers
- BR-6478AC-V2: edimax-header
- 3G-6200N: edimax-header
- 3G-6200NL: edimax-header
- BR-6475ND: edimax-header
- TEW-638APB-V2: umedia-header
- RT-N56U: mkrtn56uimg

But it rather looks like the uImage splitter is fine with the extra
header.

The following dts are not touched, due to lack of a compatible string in
the matching firmware splitter submodule:

- CONFIG_MTD_SPLIT_JIMAGE_FW
    DWR-116-A1.dts
    DWR-118-A2.dts
    DWR-512-B.dts
    DWR-921-C1.dts
    LR-25G001.dts
- CONFIG_MTD_SPLIT_TRX_FW
    WCR-1166DS.dts
    WSR-1166.dts
- CONFIG_MTD_SPLIT_MINOR_FW
    RBM11G.dts
    RBM33G.dts
- CONFIG_MTD_SPLIT_LZMA_FW
    AR670W.dts
- CONFIG_MTD_SPLIT_WRGG_FW
    DAP-1522-A1.dts

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-11-29 13:15:44 +01:00
Mathias Kresin
1977be8bd0 ramips: unifiy sysupgrade file extensions
Use .bin as file extension where possible. The user doesn't need to that
sysupgrade images for NAND boards are tarballs.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-29 13:15:44 +01:00
Mathias Kresin
7f00123d63 ramips: remove duplicate image build variables
Remove image build variables which are set to the same value as the
default image build recipe.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-29 13:15:44 +01:00
Petr Štetiar
221d3e0234 ramips: bdcom-wap2100: Change DTS license to GPL-2.0-or-later OR MIT
Having MIT as alternative is sometimes preferred by upstream maintainers
and allows sharing that simple code with other projects. We don't really
want multiple DTS versions for the same device.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-29 13:15:44 +01:00
Petr Štetiar
1576666d67 ath79: ubnt-xw: Change DTS license to GPL-2.0-or-later OR MIT
Having MIT as alternative is sometimes preferred by upstream maintainers
and allows sharing that simple code with other projects. We don't really
want multiple DTS versions for the same device.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-29 13:10:50 +01:00
Petr Štetiar
9f563267d2 ath79: ubnt-bullet-m-xw: Change DTS license to GPL-2.0-or-later OR MIT
Having MIT as alternative is sometimes preferred by upstream maintainers
and allows sharing that simple code with other projects. We don't really
want multiple DTS versions for the same device.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-29 13:10:38 +01:00
Jo-Philipp Wich
1416b63dcb rules.mk: fix syntax error
Fix broken assignment operator added in a previous commit.

Fixes db73ec9f51 ("rules.mk: add INSTALL_SUID macro")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-11-29 12:33:15 +01:00
Jo-Philipp Wich
b0261ee5e9 rules.mk: add INSTALL_SUID macro
This is useful for packages that want to stage SUID executables.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-11-29 12:06:16 +01:00
Tony Ambardar
8806da86f5 base-files: fix prerm return value, align with postinst code
The return value of a package prerm script is discarded and not returned
correctly by default_prerm(). This allows other operations like service
shutdown to "leak" their return value, prompting workarounds like commit
48cfc826 which do not address the root cause.

Preserve a package prerm script return value for use by default_prerm(),
sharing the corresponding code from default_postinst() for consistency.
Also use consistent code for handling of /etc/init.d/ scripts.

Run Tested on: LEDE 17.01.4 running ar71xx.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-11-29 11:52:56 +01:00
Felix Fietkau
5c9ad4fa6e ramips: fix MTD EEPROM offset for TL-WR840N v5
The previous offset was invalid and pointed to the end of the partition,
which was causing issues with mt76

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-29 11:45:44 +01:00
Karl Vogel
ae980458ab sdk: find kernel modules when KDIR is a symlink
The find statement would not return any results if the KDIR_BASE pointed to a
symlink. Ran into this issue due to a custom Kernel/Prepare that was installing
a symlink to the kernel directory.

The extra slash at the end fixes this scenario and does no harm for targets that
have a proper KDIR.

Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
2018-11-29 09:36:14 +01:00
Petr Štetiar
8ba6e95eed ramips: bdcom-wap2100: Enable mt7610e 5GHz radio
The 5GHz radio of this device uses an mt7610e PCI-E chip, which has
been recently started to be supported.

 mt76x0e 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
 mt76x0e 0000:01:00.0: ASIC revision: 76100002
 mt76x0e 0000:01:00.0: Firmware Version: 0.1.00
 mt76x0e 0000:01:00.0: EEPROM ver:01 fae:00

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-28 23:37:29 +01:00
Petr Štetiar
26ad357192 ramips: bdcom-wap2100: Set firmware partition format to denx,uimage
Specify firmware partition format to denx,uimage in compatible DTS property.

 2 uimage-fw partitions found on MTD device firmware
 Creating 2 MTD partitions on "firmware":
 0x000000000000-0x00000017f72b : "kernel"
 0x00000017f72b-0x000000f70000 : "rootfs"

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-28 23:37:29 +01:00
Petr Štetiar
795211093f ramips: bdcom-wap2100: Fix boot failure by adding partitions compatible property
Flash partitions were moved under partition table node, but addition of
compatible property was omitted which lead to following boot failure:

 VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
 Please append a correct "root=" boot option; here are the available partitions:
 1f00           16384 mtdblock0
  (driver?)
 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Fixes: e4d9217f (ramips: improve BDCOM WAP2100-SK support)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-28 23:37:29 +01:00
Michael Heimpold
e880a30549 mxs: use generic sysinfo board detection
Since we do nothing special for mxs based boards,
we can simply use the generic existing code.
We just need to convert scripts to use the DT
compatible strings.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-11-28 23:37:29 +01:00
Felix Fietkau
5ffacceb7b mac80211: fix reordering of buffered broadcast packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-28 23:23:38 +01:00
Felix Fietkau
87b874d4d6 mt76: update to the latest version
5fb60a7 mt7603: fix aggregation size handling
31cd20e mt7603: issue PSE reset on stuck beacon
4063ae1 mt7603: check for PSE hang / stuck beacon first
00e03b9 mt7603: fix MT_WF_PHY_CR_RXTD_BASE definition
c3efb5d mt7603: add support for detecting MT7688 and single stream devices
2a136cb mt7603: fix TKIP key setup
cd456ca mt7603: disable broken support for WEP hardware encryption
3ecb7f8 mt7603: fix hardware queue assignment
6ac9653 mt7603: fix CAB queue limits
d22feb0 mt7603: move cab queue enabling to pre-tbtt tasklet
44bb372 mt7603: fix CAB queue flush mask

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-11-28 23:23:38 +01:00
Jo-Philipp Wich
3082370551 openvpn: update to 2.4.6
Update the OpenVPN package to version 2.4.6, refresh patches and drop
menuconfig options which are not supported upstream anymore.

Also fix the x509-alt-username configure flag - it is not supported
by mbedtls and was syntactically wrong in the Makefile - and the
port-share option which has been present in menuconfig but not been
used in the Makefile.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-11-28 22:10:19 +01:00
Jo-Philipp Wich
56378bc12d uhttpd: update to latest Git head
cdfc902 cgi: escape url in 403 error output
0bba1ce uhttpd: fix building without TLS and Lua support
2ed3341 help: document -A option
fa5fd45 file: fix CPP syntax error
77b774b build: avoid redefining _DEFAULT_SOURCE

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-11-28 12:55:50 +01:00
David Yang
824b580079 ramips: fix switch port order for HuaWei HG255D
The order of port marks and LEDs is reversed according to the board.

Signed-off-by: David Yang <mmyangfl@gmail.com>
2018-11-28 01:11:38 +01:00
Roger Pueyo Centelles
cb6a8aa584 ramips: mt7620: add DIR-810L's mt7610e 5 GHz radio
The 5 GHz radio of this device uses an mt7610e pci-e chip, which has
been recently added support.

Tested on the actual device as AP and client, TCP throughput ~90 Mbps
U/D.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2018-11-28 01:11:38 +01:00
Nishant Sharma
df3e0b5806 ramips: add support for UniElec U7621-06-512M-64M variant
Add support for UniElec U7621-06 variant with 512MB RAM and 64MB flash.

Additional specs are below:

CPU: MT7621 (880Mhz)
Bootloader: Ralink U-Boot
Flash: 64MB
 - U-Boot identifies as Macronix MX66L51235F
 - kernel identifies as MX66L51235l (65536 Kbytes)
RAM: 512MB

Rest of the details as per commit 46ab81e405 ("ramips add support for
UniElec U7621-06")

Signed-off-by: Nishant Sharma <nishant@unmukti.in>
[use generic board detection, add firmware partition compatible, extend
firmware partition to use all of the remaining flash space, add a
maximum image size matching the firmware partition size]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-28 01:11:38 +01:00
Mathias Kresin
509d02a3d1 ramips: use generic board detection for Unielec u7621-06
Use the generic board detection for the board instead of the target
specific one. Mark the sysupgrade image compatible with the former used
userspace boardname to allow an upgrade from earlier versions.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-28 00:50:35 +01:00
Thomas Vincent-Cross
a160f50d4f ramips: add support for Wavlink WL-WN570HA1
This commit adds support for the Wavlink WL-WN570HA1, a dual-band PoE
wireless router with the following specifications:

 - CPU: MediaTek MT7688AN 580MHz
 - Flash: 8MB
 - RAM: 64MB
 - Ethernet: 1x 10/100Mbps
 - 2.4 GHz: 802.11b/g/n SoC, 1T1R, 27 dBm
 - 5 GHz: 802.11a/n/ac MT7610E, 1T1R, 25 dBm
 - Antennas: 2x external (1 per radio), detachable
 - LEDs: 3 programmable + Wi-Fi, WAN/LAN, Power
 - Buttons: Reset

Flashing instructions:

Factory U-boot launches a TFTP client if reset button is pressed during power-on.
Rename the sysupgrade file and configure TFTP as follows:

 - Client (WL-WN570HA1) IP: 192.168.10.101
 - Server IP: 192.168.10.100
 - Filename: firmware.bin

Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au>
[use generic board detection, add firmware partition compatible]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-28 00:50:35 +01:00
Rosy Song
31469aebd4 ath79: add support for ROSINSON WR818 board
This commit adds support for the ROSINSON WR818 WiFi-Router

SoC:    Qualcomm Atheros QCA9563,
FLASH:  Winbond W25Q128FV 16MBytes,
WiFi:   QCA9563 b/g/n 3x3 450Mbit/s,
USB:    1x USB 2.0 Type A, 1x USB2.0 Type C,
IN:     WPS/Reset button GPIO1,
OUT:    Power LED red, Internet LED red, WLAN LED red,
        LAN1 LED red, LAN2 LED red, System LED red,
UART:   RX-GPIO18, TX-GPIO22,

Tested and working:
    - Ethernet (LAN + WAN)
    - WiFi
    - OpenWRT sysupgrade
    - Button
    - LEDs

Installation of OpenWRT from vendor firmware:
    - Connect to the Web-interface at http://192.168.1.1
    - Go to "Administration" -> "Firmware Upgrade"
    - Upload the OpenWrt sysupgrade image

Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-11-27 21:11:54 +01:00
Mathias Kresin
7574781337 ath79: merge glinet gl-x750 dtsi and dts
The board doesn't come in different flash type flavours, hence there is
no need to keep a dtsi + dts for this purpose.

While at it, fix some whitespace issues.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-27 21:11:54 +01:00
Mathias Kresin
68d77241cd ath79: rename glinet x750
The boardname is gl-x750 and is already used for the led names.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-27 21:11:54 +01:00
Russell Senior
e0def989e8 ramips: fix alphabetic ordering of skylab skw92a
Fix the alphabetic ordering of skylab skw92a in ramips_setup_interfaces.

Signed-off-by: Russell Senior <russell@personaltelco.net>
2018-11-27 21:11:54 +01:00
Matthias Badaire
1100ba43db ramips: fix RavPower WD03 SoC dtsi include
The RavPower WD03 is a mt7620n based baord. With the change applied, I2C
should work now with the RavPower WD03.

Signed-off-by: Matthias Badaire <mbadaire@gmail.com>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-27 21:11:54 +01:00
John Crispin
c6aa4f53e8 Revert "x86: add intel microcode entries to grub config"
This reverts commit 546fced2a2.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:38 +01:00
John Crispin
231d9d5327 Revert "intel-microcode: create early load microcode image"
This reverts commit 022ffb56b2.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:37 +01:00
John Crispin
8ead5a735d Revert "x86: add amd microcode entries to grub config"
This reverts commit a822283c7e.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:35 +01:00
John Crispin
30f30d3e11 Revert "amd64-microcode: create early load microcode image"
This reverts commit 975019b3a7.

Signed-off-by: John Crispin <john@phrozen.org>
2018-11-27 18:58:33 +01:00
Daniel Engberg
731a12ad83 tools/bison: Update to 3.2.2
Update bison to 3.2.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-11-27 10:28:28 +01:00
David Bauer
a734450d6f ath79: add Archer C58/C59 partition compatible
This commit adds firmware partition compatible for the
TP-Link Archer C58 v1 and Archer C59 v1.

Since a22311e this allows to select the correct mtdsplit
parser instead of trying all available ones one by one.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-26 21:27:17 +01:00
David Bauer
df2e6b64d1 ath79: add firmware partition compatible for OCEDO
This commit adds firmware partition compatible for the
OCEDO Raccoon and OCEDO Koala.

Since a22311e this allows to select the correct mtdsplit
parser instead of trying all available ones one by one.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-11-26 21:26:56 +01:00
INAGAKI Hiroshi
37c848810c ath79: specify "firmware" partition format for I-O DATA devices
Specify firmware partition format (denx,uimage) by compatible string
for I-O DATA devices.

affected devices (&run tested)

- WN-AC1167DGR
- WN-AC1600DGR2

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-11-26 21:26:07 +01:00
INAGAKI Hiroshi
fa1a120a1a ath79: specify "firmware" partition format for ELECOM WRC-300GHBK2-I
Specify firmware partition format (denx,uimage) by compatible string
for ELECOM WRC-300GHBK2-I.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-11-26 21:26:06 +01:00
Mathias Kresin
f4abc962ec ath79: fix shebang
The shebang was accidentally changed with 9989fd5154 ("ath79: add
support for GL-iNet GL-X750").

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-26 19:40:31 +01:00
Mathias Kresin
aa82fdf110 ramips: fix GB-PC1/PC2 build error
With ed25e3ac02 ("ramips: fix some clocks in mt7621.dtsi") the
cpuclock node was dropped from the mt7621.dtsi without removing the
references to this node from the GB-PC1/PC2 dts files.

Remove them now, to fix the build error.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-26 19:40:31 +01:00
Mathias Kresin
d7494f30f5 ramips: fix Lava LR-25G001 invalid led names
It has to be <board>:<colour>:<function> and is expected exactly this
way by the userspace scripts.

While at it, fix some whitespace issues in the dts file and rename the
flash node as required upstream.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-26 19:40:31 +01:00
Günther Kelleter
33878b0a40 kernel: ar8xxx: get_arl_table now shows all ports of an entry
Multicast ARL entries can have multiple destination ports. Get and dump
all destination ports of each entry, not just the lowest.

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
2018-11-26 18:41:21 +01:00
Mathias Kresin
be3e69d991 ramips: rt2880: fix pci cells definition
Set the correct number of cells to fix "property has invalid length" dtc
compiler warnings.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-11-26 15:54:22 +01:00