ar71xx: improve support for the My Net Wi-Fi Range Extender device
This patch improves support for the device considerably. 1. The wifi didn't work in the initial release. This was because the WMAC of the AR9340 is not connected to the antennas. (However, it can pick up wifi signals, if they are strong enough!) Instead there's a dedicated AR9300 chip on the same board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Patchwork: http://patchwork.openwrt.org/patch/4461/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38949
This commit is contained in:
parent
1167f92ac6
commit
981e3b354a
2 changed files with 9 additions and 5 deletions
|
@ -153,10 +153,9 @@ static void __init mynet_rext_setup(void)
|
||||||
ARRAY_SIZE(mynet_rext_gpio_keys),
|
ARRAY_SIZE(mynet_rext_gpio_keys),
|
||||||
mynet_rext_gpio_keys);
|
mynet_rext_gpio_keys);
|
||||||
|
|
||||||
mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
||||||
ath79_register_wmac(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
|
AR934X_ETH_CFG_RXD_DELAY |
|
||||||
|
AR934X_ETH_CFG_RDV_DELAY);
|
||||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
|
|
||||||
|
|
||||||
ath79_register_mdio(0, 0x0);
|
ath79_register_mdio(0, 0x0);
|
||||||
|
|
||||||
|
@ -169,6 +168,10 @@ static void __init mynet_rext_setup(void)
|
||||||
ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
|
ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
|
||||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||||
ath79_register_eth(0);
|
ath79_register_eth(0);
|
||||||
|
|
||||||
|
/* WLAN */
|
||||||
|
mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
|
||||||
|
ap91_pci_init(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
|
||||||
}
|
}
|
||||||
|
|
||||||
MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
|
MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
|
||||||
|
|
|
@ -20,13 +20,14 @@
|
||||||
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
|
||||||
--- a/arch/mips/ath79/Kconfig
|
--- a/arch/mips/ath79/Kconfig
|
||||||
+++ b/arch/mips/ath79/Kconfig
|
+++ b/arch/mips/ath79/Kconfig
|
||||||
@@ -801,6 +801,16 @@ config ATH79_MACH_MYNET_N600
|
@@ -801,6 +801,17 @@ config ATH79_MACH_MYNET_N600
|
||||||
select ATH79_DEV_WMAC
|
select ATH79_DEV_WMAC
|
||||||
select ATH79_NVRAM
|
select ATH79_NVRAM
|
||||||
|
|
||||||
+config ATH79_MACH_MYNET_REXT
|
+config ATH79_MACH_MYNET_REXT
|
||||||
+ bool "WD My Net Wi-Fi Range Extender board support"
|
+ bool "WD My Net Wi-Fi Range Extender board support"
|
||||||
+ select SOC_AR934X
|
+ select SOC_AR934X
|
||||||
|
+ select ATH79_DEV_AP9X_PCI if PCI
|
||||||
+ select ATH79_DEV_ETH
|
+ select ATH79_DEV_ETH
|
||||||
+ select ATH79_DEV_GPIO_BUTTONS
|
+ select ATH79_DEV_GPIO_BUTTONS
|
||||||
+ select ATH79_DEV_LEDS_GPIO
|
+ select ATH79_DEV_LEDS_GPIO
|
||||||
|
|
Loading…
Reference in a new issue