openwrtv4/target/linux/lantiq/xrx200/config-default

CONFIG_ADM6996_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_AT803X_PHY=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_RMAP=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_HWMON=y
CONFIG_ICPLUS_PHY=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_ISDN is not set
CONFIG_LANTIQ_PHY=y
CONFIG_LANTIQ_XRX200=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MIPS_MT=y
# CONFIG_MIPS_MT_FPAFF is not set
CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_XWAY=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NLS=y
CONFIG_NR_CPUS=2
CONFIG_PCIE_LANTIQ=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
CONFIG_SENSORS_LTQ_CPUTEMP=y
CONFIG_SMP=y
CONFIG_SMP_UP=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_SYNC_R4K=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_XPS=y
CONFIG_XRX200_PHY_FW=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_MIPS_VPE_LOADER=y
CONFIG_MIPS_VPE_LOADER_TOM=y
CONFIG_MIPS_VPE_APSP_API=y
CONFIG_IFX_VPE_EXT=y
CONFIG_PERFCTRS=n
# CONFIG_MTSCHED is not set
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_ADM6996_PHY=y`
			`CONFIG_AR8216_PHY=y`
lantiq: Add Support for Fritz!Box 7360 SL Signed-off-by: Sebastian Ortwein <krone@animeland.de> Tested-by: Guido Lipke <lipkegu@gmail.com> 2016-06-11 13:05:52 +00:00			`CONFIG_AT803X_PHY=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_CPU_MIPSR2_IRQ_EI=y`
			`CONFIG_CPU_MIPSR2_IRQ_VI=y`
			`CONFIG_CPU_RMAP=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_CRC16=y`
			`CONFIG_CRYPTO_DEFLATE=y`
			`CONFIG_CRYPTO_LZO=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_FIRMWARE_IN_KERNEL=y`
lantiq: add cpu temperatur sensor driver for xrx200 Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> 2016-08-01 09:10:42 +00:00			`CONFIG_HWMON=y`
lantiq: VGV7510KW22 - enable the IP101A phy The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me> 2016-05-26 21:11:17 +00:00			`CONFIG_ICPLUS_PHY=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_INPUT=y`
			`CONFIG_INPUT_EVDEV=y`
			`CONFIG_INPUT_POLLDEV=y`
lantiq: add support for kernel 4.9 The following patches were dropped because they are already applied upstream: 0012-pinctrl-lantiq-fix-up-pinmux.patch 0013-MTD-lantiq-xway-fix-invalid-operator.patch 0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch 0015-MTD-lantiq-xway-remove-endless-loop.patch 0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch 0017-MTD-xway-fix-nand-locking.patch 0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch 0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch 0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch 0047-irq-fixes.patch 0047-mtd-plat-nand-pass-of-node.patch 0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch 0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch 0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch 122-MIPS-store-the-appended-dtb-address-in-a-variable.patch The PHY driver was reduced to the code adding the LED configuration, the rest is already upstream: 0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch The SPI driver was replaced with the version pending for upstream inclusion: New driver: 0090-spi-add-transfer_status-callback.patch 0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch Old driver: 0100-spi-add-support-for-Lantiq-SPI-controller.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 2017-02-11 14:52:41 +00:00			`CONFIG_INTEL_XWAY_PHY=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`# CONFIG_ISDN is not set`
lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget. These drivers are not needed for ASE, Danube and AR9. As side effect PHY11G and PHY22F firmwares are not included in the kernel image, which saves 64 KB. Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41449 2014-07-01 13:18:38 +00:00			`CONFIG_LANTIQ_PHY=y`
			`CONFIG_LANTIQ_XRX200=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_LEDS_TRIGGER_HEARTBEAT=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_LZO_COMPRESS=y`
			`CONFIG_LZO_DECOMPRESS=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_MIPS_MT=y`
			`# CONFIG_MIPS_MT_FPAFF is not set`
			`CONFIG_MIPS_MT_SMP=y`
			`CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_MTD_NAND=y`
			`CONFIG_MTD_NAND_ECC=y`
			`CONFIG_MTD_NAND_PLATFORM=y`
			`CONFIG_MTD_NAND_XWAY=y`
			`# CONFIG_MTD_PHYSMAP_OF is not set`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_MTD_UBI=y`
			`CONFIG_MTD_UBI_BEB_LIMIT=20`
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987 2015-01-17 07:07:15 +00:00			`CONFIG_MTD_UBI_BLOCK=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`# CONFIG_MTD_UBI_FASTMAP is not set`
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987 2015-01-17 07:07:15 +00:00			`# CONFIG_MTD_UBI_GLUEBI is not set`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_MTD_UBI_WL_THRESHOLD=4096`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_NET_FLOW_LIMIT=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_NLS=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_NR_CPUS=2`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_PCIE_LANTIQ=y`
lantiq: add Buffalo WBMR-300HPD support Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 14:51:39 +00:00			`CONFIG_POWER_RESET=y`
			`CONFIG_POWER_RESET_GPIO=y`
			`CONFIG_POWER_SUPPLY=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_RCU_STALL_COMMON=y`
			`CONFIG_RFS_ACCEL=y`
			`CONFIG_RPS=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_RTL8306_PHY=y`
			`CONFIG_RTL8366S_PHY=y`
			`CONFIG_RTL8367B_PHY=y`
			`CONFIG_RTL8367_PHY=y`
lantiq: add cpu temperatur sensor driver for xrx200 Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> 2016-08-01 09:10:42 +00:00			`CONFIG_SENSORS_LTQ_CPUTEMP=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_SMP=y`
			`CONFIG_SMP_UP=y`
lantiq: enable swconfig LED support Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 17:21:26 +00:00			`CONFIG_SWCONFIG_LEDS=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_SYNC_R4K=y`
			`CONFIG_SYS_SUPPORTS_SCHED_SMT=y`
			`CONFIG_SYS_SUPPORTS_SMP=y`
			`CONFIG_TREE_RCU=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_UBIFS_FS=y`
			`CONFIG_UBIFS_FS_ADVANCED_COMPR=y`
			`CONFIG_UBIFS_FS_LZO=y`
			`CONFIG_UBIFS_FS_ZLIB=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_USB=y`
			`CONFIG_USB_COMMON=y`
			`# CONFIG_USB_EHCI_HCD is not set`
			`CONFIG_USB_SUPPORT=y`
			`# CONFIG_USB_UHCI_HCD is not set`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-08-04 10:38:01 +00:00			`CONFIG_XPS=y`
lantiq: add v3.10 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38031 2013-09-17 21:46:10 +00:00			`CONFIG_XRX200_PHY_FW=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_ZLIB_DEFLATE=y`
			`CONFIG_ZLIB_INFLATE=y`
lantiq: add vpe/watchdog modules to kernel (required not-distributable firmware blob - dump it by yourself from original firmware) Signed-off-by: Eddi De Pieri <eddi@depieri.net> (cherry picked from commit 064f467264c5c9b6eca0bb96b587f9412b770cc5) Signed-off-by: Stefan Koch <stefan.koch10@gmail.com> 2014-11-03 08:33:04 +00:00			`CONFIG_MIPS_VPE_LOADER=y`
			`CONFIG_MIPS_VPE_LOADER_TOM=y`
			`CONFIG_MIPS_VPE_APSP_API=y`
			`CONFIG_IFX_VPE_EXT=y`
			`CONFIG_PERFCTRS=n`
			`# CONFIG_MTSCHED is not set`