openwrtv4/target/linux/lantiq/xrx200/config-default

CONFIG_ADM6996_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_RMAP=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_ICPLUS_PHY=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_ISDN is not set
CONFIG_LANTIQ_PHY=y
CONFIG_LANTIQ_XRX200=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MIPS_MT=y
# CONFIG_MIPS_MT_FPAFF is not set
CONFIG_MIPS_MT_SMP=y
CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_XWAY=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NLS=y
CONFIG_NR_CPUS=2
CONFIG_PCIE_LANTIQ=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
CONFIG_SMP=y
CONFIG_SMP_UP=y
CONFIG_SYNC_R4K=y
CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
# CONFIG_UBIFS_FS_XZ is not set
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_XPS=y
CONFIG_XRX200_PHY_FW=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_ADM6996_PHY=y`
			`CONFIG_AR8216_PHY=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_CPU_MIPSR2_IRQ_EI=y`
			`CONFIG_CPU_MIPSR2_IRQ_VI=y`
			`CONFIG_CPU_RMAP=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_CRC16=y`
			`CONFIG_CRYPTO_DEFLATE=y`
			`CONFIG_CRYPTO_LZO=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_FIRMWARE_IN_KERNEL=y`
lantiq: VGV7510KW22 - enable the IP101A phy The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me> 2016-05-26 21:11:17 +00:00			`CONFIG_ICPLUS_PHY=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_INPUT=y`
			`CONFIG_INPUT_EVDEV=y`
			`CONFIG_INPUT_POLLDEV=y`
			`# CONFIG_ISDN is not set`
lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget. These drivers are not needed for ASE, Danube and AR9. As side effect PHY11G and PHY22F firmwares are not included in the kernel image, which saves 64 KB. Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41449 2014-07-01 13:18:38 +00:00			`CONFIG_LANTIQ_PHY=y`
			`CONFIG_LANTIQ_XRX200=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_LEDS_TRIGGER_HEARTBEAT=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_LZO_COMPRESS=y`
			`CONFIG_LZO_DECOMPRESS=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_MIPS_MT=y`
			`# CONFIG_MIPS_MT_FPAFF is not set`
			`CONFIG_MIPS_MT_SMP=y`
			`CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_MTD_NAND=y`
			`CONFIG_MTD_NAND_ECC=y`
			`CONFIG_MTD_NAND_PLATFORM=y`
			`CONFIG_MTD_NAND_XWAY=y`
			`# CONFIG_MTD_PHYSMAP_OF is not set`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_MTD_UBI=y`
			`CONFIG_MTD_UBI_BEB_LIMIT=20`
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987 2015-01-17 07:07:15 +00:00			`CONFIG_MTD_UBI_BLOCK=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`# CONFIG_MTD_UBI_FASTMAP is not set`
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987 2015-01-17 07:07:15 +00:00			`# CONFIG_MTD_UBI_GLUEBI is not set`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_MTD_UBI_WL_THRESHOLD=4096`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_NET_FLOW_LIMIT=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_NLS=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_NR_CPUS=2`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_PCIE_LANTIQ=y`
lantiq: add Buffalo WBMR-300HPD support Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 14:51:39 +00:00			`CONFIG_POWER_RESET=y`
			`CONFIG_POWER_RESET_GPIO=y`
			`CONFIG_POWER_SUPPLY=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_RCU_STALL_COMMON=y`
			`CONFIG_RFS_ACCEL=y`
			`CONFIG_RPS=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_RTL8306_PHY=y`
			`CONFIG_RTL8366S_PHY=y`
			`CONFIG_RTL8367B_PHY=y`
			`CONFIG_RTL8367_PHY=y`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_SMP=y`
			`CONFIG_SMP_UP=y`
			`CONFIG_SYNC_R4K=y`
			`CONFIG_SYS_SUPPORTS_SCHED_SMT=y`
			`CONFIG_SYS_SUPPORTS_SMP=y`
			`CONFIG_TREE_RCU=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_UBIFS_FS=y`
			`CONFIG_UBIFS_FS_ADVANCED_COMPR=y`
			`CONFIG_UBIFS_FS_LZO=y`
			`# CONFIG_UBIFS_FS_XZ is not set`
			`CONFIG_UBIFS_FS_ZLIB=y`
lantiq: add a subtarget for the xrx200 SoC family Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38029 2013-09-17 21:46:00 +00:00			`CONFIG_USB=y`
			`CONFIG_USB_COMMON=y`
			`# CONFIG_USB_EHCI_HCD is not set`
			`CONFIG_USB_SUPPORT=y`
			`# CONFIG_USB_UHCI_HCD is not set`
lantiq: enable SMP for XRX200 Signed-off-by: Felix Fietkau <nbd@nbd.name> 2016-06-09 15:03:41 +00:00			`CONFIG_XPS=y`
lantiq: add v3.10 patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38031 2013-09-17 21:46:10 +00:00			`CONFIG_XRX200_PHY_FW=y`
lantiq: xrx200: add ubi support in the kernel Signed-off-by: Antonios Vamporakis <ant@area128.com> SVN-Revision: 40314 2014-03-30 09:15:54 +00:00			`CONFIG_ZLIB_DEFLATE=y`
			`CONFIG_ZLIB_INFLATE=y`