KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network

154 lines
2.7 KiB
Text
Raw Normal View History

bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
#!/bin/sh
#
# Copyright (C) 2012 OpenWrt.org
#
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
. /lib/functions/uci-defaults.sh
. /lib/brcm63xx.sh
ucidef_set_interface_loopback
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
case "$(brcm63xx_board_name)" in
cvg834g |\
rta770bw |\
rta770w |\
spw303v |\
spw500v)
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_set_interface_lan "eth0"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
ar1004g |\
bcm96338gw |\
bcm96338w |\
cpva642 |\
ct-5365 |\
ct-536p_5621t |\
ct-6373 |\
dg834g_v4 |\
dsl-2640b-b |\
dsl-2640u |\
fast2604 |\
rta1320 |\
v2110)
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
ucidef_set_interface_lan "eth0"
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
agpf-s0 |\
bcm96348gw |\
bcm96348gw-10 |\
bcm96348gw-11 |\
bcm96358vw |\
bcm96358vw2 |\
cpva502p |\
dg834gt |\
dmv-s0 |\
dsl-2650u |\
dv-201amr |\
f5d7633 |\
fast2404 |\
magic |\
rg100a |\
rta1025W |\
td-w8900gb |\
usr9108 |\
v2500v_bb)
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5"
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
dsl-274xb-c |\
hg553 |\
brcm63xx: Add BT Home Hub 2A support. Support for the BT HomeHub 2.0 Type A. This router was manufactured by Thomson, and it's BCM6358 based. The leds are controled by two chained HC594, all working ok. The BCM5325 switch has the RESET# pin wired to the GPIO15, but currently there is no way to tell the b53 driver how to get this gpio number in brcm63xx, therefore swconfig won't use it when performing a switch reset. The patch was tested with several firmwares, and all except unsupported stuff (i.e xDSL) works pretty well. Tested-by: Tahir <tahir00ali@gmail.com> Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> SVN-Revision: 44985
2015-03-25 15:35:12 +00:00
hg556a_* |\
homehub2a)
bcm63xx: add a default switch configuration for DSL-274XB SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
dva-g3810bn |\
hg520 |\
neufbox4)
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "eth1" "1" "1"
ucidef_add_switch_vlan "eth1" "1" "0 1 2 3 4 5t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
a4001n1 |\
a4001n |\
ar-5381u |\
ar-5387un |\
bcm963281tan |\
bcm96328avng |\
bcm96368mvngr |\
dsl-274xb-f |\
dsl-275xb-d |\
fast2504n |\
fast2704v2 |\
brcm63xx: Add Huawei HG655b support This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
2015-05-21 19:31:54 +00:00
hg655b |\
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
p870hw-51a_v2 |\
vr-3025un |\
vr-3025u)
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 8t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
bcm96368mvwg)
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "1 2 4 5 8t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
wap-5831n)
brcm63xx: Add support for Comtrend WAP-5813n This adds support for Comtrend WAP-5813n. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: refresh patches] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 41421
2014-06-30 13:34:34 +00:00
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "eth0" "2" "4 5t"
;;
brcm63xx: Add support for Plusnet 2704N BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by: Matt Goring <matt.goring@googlemail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46562
2015-08-05 13:55:37 +00:00
fast2704n |\
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
dgnd3700v1_dgnd3800b)
brcm63xx: Add DGND3700 v1 / DGND3800B support This adds support for the Netgear DGND3700 v1 and DGND3800B. DGND3700 v1 and DGND3800B are exactly the same router, only one difference, the factory firmware. This patch produces two factory firmwares for each router. The router includes an onboard NAND flash for extra storage. NAND is currently not supported in bcm63xx, so no code added for this part. The NOR flash (32MB) is enough for storing an openwrt firmware. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> [jogo: Add back commit message from v1] Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "eth0" "1" "1"
ucidef_add_switch_vlan "eth0" "1" "1 2 3 4 8t"
ucidef_add_switch_vlan "eth0" "2" "0 8t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
neufbox6)
bcm63xx: switch to b53 and swconfig Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t"
ucidef_add_switch_vlan "switch0" "2" "0 9t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
vg50)
brcm63xx: add VW6339GU support Completely untested except for booting from network; wan port only works in 10/HD, lan1 only in 100/FD. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39678
2014-02-22 11:16:46 +00:00
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
brcm63xx: switch to board_name based configuration Board IDs are not unique, so in preparation for depricating them, always use board_name for any (default) configuration decisions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
bcm963268bu_p300)
brcm63xx: add initial support for BCM963268BU_P300 reference board Only netboot tested, so no images or now. GbE ports are only working in FE mode, and leds do not work. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39679
2014-02-22 11:16:48 +00:00
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 3 4 5 6 7 8t"
;;
bcm63xx: setup network config through uci-defaults SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
*)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
esac
uci commit network
exit 0
Reference in a new issue Copy permalink