openwrtv4/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

201 lines
3.3 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-status = &system;
};
gpio_leds: leds {
compatible = "gpio-leds";
system: system {
label = "tp-link:green:system";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
wifi_green {
label = "tp-link:green:wlan";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wifi_wps {
label = "tp-link:green:wps";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan_fail {
label = "tp-link:orange:wan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wifi {
label = "RFKILL button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xf30000>;
};
info: partition@f50000 {
label = "product-info";
reg = <0xf50000 0x020000>;
read-only;
};
partition@f70000 {
label = "config";
reg = <0xf70000 0x050000>;
read-only;
};
partition@fc0000 {
label = "partition-table";
reg = <0xfc0000 0x010000>;
read-only;
};
partition@fd0000 {
label = "logs";
reg = <0xfd0000 0x020000>;
read-only;
};
art: partition@ff0000 {
label = "ART";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&info 0x8>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};