ath79: add tl-wr1043nd-v4 support everything is working

tplink-safeloader: resize kernel partition
kernel 4.14 is much bigger, resize the partition

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
This commit is contained in:
Lucian Cristian 2018-06-16 13:37:55 +03:00 committed by John Crispin
parent cad843e1f5
commit 71ae0792ba
6 changed files with 273 additions and 13 deletions

View file

@ -25,6 +25,13 @@ case "$board" in
"tplink,tl-mr3020-v1")
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x02"
;;
"tplink,tl-wr1043nd-v4")
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
;;
"tplink,tl-wr740n-v2")
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"

View file

@ -48,6 +48,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
"tplink,tl-wr1043nd-v4")
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
"netgear,wndr3800")
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \

View file

@ -0,0 +1,223 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-status = &system;
};
leds {
compatible = "gpio-leds";
system: system {
label = "tp-link:green:system";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
usb {
label = "tp-link:green:usb";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
default-state = "off";
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
wifi_green {
label = "tp-link:green:wlan";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "phy0tpt";
};
wifi_wps {
label = "tp-link:green:wps";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
wan {
label = "tp-link:green:wan";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wifi {
label = "RFKILL button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_usb_power {
gpio-export,name = "tp-link:power:usb";
gpio-export,output = <1>;
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&usb_phy0 {
status = "okay";
};
&usb0 {
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xf30000>;
};
info: partition@f50000 {
label = "product-info";
reg = <0xf50000 0x020000>;
read-only;
};
partition@f70000 {
label = "config";
reg = <0xf70000 0x050000>;
read-only;
};
partition@fc0000 {
label = "partition-table";
reg = <0xfc0000 0x010000>;
read-only;
};
partition@fd0000 {
label = "logs";
reg = <0xfd0000 0x020000>;
read-only;
};
art: partition@ff0000 {
label = "ART";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&info 0x8>;
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};

View file

@ -0,0 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9563_tl-wr1043n.dtsi"
/ {
compatible = "tplink,tl-wr1043nd-v4", "qca,qca9563";
model = "TP-Link TL-WR1043ND Version 4";
};

View file

@ -1,16 +1,5 @@
include ./common-tp-link.mk
define Device/tl-wr1043nd-v1
$(Device/tplink-8m)
ATH_SOC := ar9132
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430001
SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
endef
TARGET_DEVICES += tl-wr1043nd-v1
define Device/tl-wdr3600
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
@ -28,3 +17,28 @@ define Device/tl-wdr4300
SUPPORTED_DEVICES := tplink,tl-wdr4300 tl-wdr4300
endef
TARGET_DEVICES += tl-wdr4300
define Device/tl-wr1043nd-v1
$(Device/tplink-8m)
ATH_SOC := ar9132
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430001
SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd
endef
TARGET_DEVICES += tl-wr1043nd-v1
define Device/tl-wr1043nd-v4
$(Device/tplink)
ATH_SOC := qca9563
IMAGE_SIZE := 15552k
DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430004
TPLINK_BOARD_ID := TLWR1043NDV4
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
SUPPORTED_DEVICES := tplink,tl-wr1043nd-v4 tl-wr1043nd-v4
endef
TARGET_DEVICES += tl-wr1043nd-v4

View file

@ -779,8 +779,8 @@ static struct device_info boards[] = {
*/
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
{"os-image", 0x20000, 0x180000},
{"file-system", 0x1a0000, 0xdb0000},
{"os-image", 0x20000, 0x200000},
{"file-system", 0x220000, 0xd30000},
{"default-mac", 0xf50000, 0x00200},
{"pin", 0xf50200, 0x00200},
{"product-info", 0xf50400, 0x0fc00},