2016-10-06 00:19:17 +00:00
|
|
|
define Device/ap90q
|
|
|
|
|
DEVICE_TITLE := YunCore AP90Q
|
|
|
|
|
BOARDNAME = AP90Q
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ap90q
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/bsb
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := Smart Electronics Black Swift board
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = BSB
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += bsb
|
|
|
|
|
|
|
|
|
|
define Device/carambola2
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := Carambola2 board from 8Devices
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = CARAMBOLA2
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += carambola2
|
|
|
|
|
|
|
|
|
|
define Device/cf-e316n-v2
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := COMFAST CF-E316N v2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = CF-E316N-V2
|
|
|
|
|
IMAGE_SIZE = 16192k
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cf-e316n-v2
|
|
|
|
|
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
define Device/cf-e320n-v2
|
|
|
|
|
$(Device/cf-e316n-v2)
|
|
|
|
|
DEVICE_TITLE := COMFAST CF-E320N v2
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = CF-E320N-V2
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cf-e320n-v2
|
|
|
|
|
|
ar71xx: add support for COMFAST CF-E380AC v1 and v2
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.
There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size
Version number is available only inside vendor GUI,
hardware and markings are the same.
Short specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-14 16:38:23 +00:00
|
|
|
define Device/cf-e380ac-v1
|
|
|
|
|
DEVICE_TITLE := COMFAST CF-E380AC v1
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
|
|
|
|
|
BOARDNAME = CF-E380AC-V1
|
|
|
|
|
IMAGE_SIZE = 16128k
|
|
|
|
|
MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cf-e380ac-v1
|
|
|
|
|
|
|
|
|
|
define Device/cf-e380ac-v2
|
|
|
|
|
$(Device/cf-e380ac-v1)
|
|
|
|
|
DEVICE_TITLE := COMFAST CF-E380AC v2
|
|
|
|
|
BOARDNAME = CF-E380AC-V2
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cf-e380ac-v2
|
|
|
|
|
|
ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N
As we already have support for CF-E316N v2 and many devices from
this vendor look similar, the support was included in existing
mach-*.c file, with few cleanups and fixes.
All 3 devices are based on Qualcomm/Atheros QCA9531 v2.
COMFAST CF-E320N v2 is a ceiling mount AP with PoE support.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, both with PoE support
- 64 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x RGB LED, 1x button
- UART (J1), GPIO (J9) and USB (J2) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support.
They seem to have different only the front panel.
Short specification:
- 650/393/216 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, WAN with PoE support
- 1x USB 2.0 (in CF-E520N covered by panel, available on PCB)
- 32 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- 2x internal antennas
- 1x LED, 1x button
- UART (J1) headers on PCB
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-10-05 00:24:58 +00:00
|
|
|
define Device/cf-e520n
|
|
|
|
|
DEVICE_TITLE := COMFAST CF-E520N
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = CF-E520N
|
|
|
|
|
IMAGE_SIZE = 8000k
|
|
|
|
|
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cf-e520n
|
|
|
|
|
|
|
|
|
|
define Device/cf-e530n
|
|
|
|
|
$(Device/cf-e520n)
|
|
|
|
|
DEVICE_TITLE := COMFAST CF-E530N
|
|
|
|
|
BOARDNAME = CF-E530N
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cf-e530n
|
|
|
|
|
|
2016-10-08 01:36:35 +00:00
|
|
|
define Device/cpe830
|
|
|
|
|
$(Device/ap90q)
|
|
|
|
|
DEVICE_TITLE := YunCore CPE830
|
|
|
|
|
DEVICE_PACKAGES := rssileds
|
|
|
|
|
BOARDNAME = CPE830
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cpe830
|
|
|
|
|
|
2016-10-07 23:17:04 +00:00
|
|
|
define Device/cpe870
|
|
|
|
|
DEVICE_TITLE := YunCore CPE870
|
|
|
|
|
DEVICE_PACKAGES := rssileds
|
|
|
|
|
BOARDNAME = CPE870
|
|
|
|
|
IMAGE_SIZE = 7936k
|
|
|
|
|
MTDPARTS = spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += cpe870
|
|
|
|
|
|
2016-10-06 12:08:24 +00:00
|
|
|
define Device/dragino2
|
|
|
|
|
BOARDNAME := DRAGINO2
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
|
2016-10-06 12:08:24 +00:00
|
|
|
DEVICE_TITLE := Dragino 2 (MS14)
|
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += dragino2
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/weio
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := WeIO
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = WEIO
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += weio
|
|
|
|
|
|
|
|
|
|
define Device/gl-ar150
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := GL AR150
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = GL-AR150
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += gl-ar150
|
|
|
|
|
|
|
|
|
|
define Device/gl-ar300
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := GL AR300
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = GL-AR300
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += gl-ar300
|
|
|
|
|
|
2016-07-15 10:00:04 +00:00
|
|
|
define Device/gl-ar300m
|
|
|
|
|
DEVICE_TITLE := GL AR300M
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 uboot-envtools
|
|
|
|
|
BOARDNAME = GL-AR300M
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += gl-ar300m
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/gl-domino
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := GL Domino Pi
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = DOMINO
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += gl-domino
|
|
|
|
|
|
2016-07-19 02:54:11 +00:00
|
|
|
define Device/gl-mifi
|
|
|
|
|
DEVICE_TITLE := GL MIFI
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = GL-MIFI
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += gl-mifi
|
|
|
|
|
|
2016-10-24 19:05:53 +00:00
|
|
|
define Device/mr12
|
|
|
|
|
DEVICE_TITLE := Meraki MR12
|
|
|
|
|
DEVICE_PACKAGES := kmod-spi-gpio
|
|
|
|
|
BOARDNAME = MR12
|
2016-10-24 19:05:54 +00:00
|
|
|
IMAGE_SIZE = 15680k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
|
2016-10-24 19:05:53 +00:00
|
|
|
IMAGE/kernel.bin = append-kernel
|
|
|
|
|
IMAGE/rootfs.bin = append-rootfs | pad-rootfs
|
|
|
|
|
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 13440k | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGES := kernel.bin rootfs.bin sysupgrade.bin
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += mr12
|
|
|
|
|
|
|
|
|
|
define Device/mr16
|
|
|
|
|
DEVICE_TITLE := Meraki MR16
|
|
|
|
|
DEVICE_PACKAGES := kmod-spi-gpio
|
|
|
|
|
BOARDNAME = MR16
|
2016-10-24 19:05:54 +00:00
|
|
|
IMAGE_SIZE = 15680k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
|
2016-10-24 19:05:53 +00:00
|
|
|
IMAGE/kernel.bin = append-kernel
|
|
|
|
|
IMAGE/rootfs.bin = append-rootfs | pad-rootfs
|
|
|
|
|
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 13440k | append-kernel | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGES := kernel.bin rootfs.bin sysupgrade.bin
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += mr16
|
|
|
|
|
|
2016-06-16 16:08:03 +00:00
|
|
|
define Device/dr531
|
|
|
|
|
DEVICE_TITLE := Wallys DR531
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = DR531
|
|
|
|
|
IMAGE_SIZE = 7808k
|
|
|
|
|
MTDPARTS = spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += dr531
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/wndr3700
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := NETGEAR WNDR3700
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME = WNDR3700
|
|
|
|
|
NETGEAR_KERNEL_MAGIC = 0x33373030
|
|
|
|
|
NETGEAR_BOARD_ID = WNDR3700
|
|
|
|
|
IMAGE_SIZE = 7680k
|
|
|
|
|
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
|
|
|
|
|
IMAGES := sysupgrade.bin factory.img factory-NA.img
|
|
|
|
|
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
|
2016-09-11 17:05:20 +00:00
|
|
|
IMAGE/default = append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
2016-05-22 21:10:02 +00:00
|
|
|
IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/wndr3700v2
|
|
|
|
|
$(Device/wndr3700)
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := NETGEAR WNDR3700 v2
|
2016-05-22 21:10:02 +00:00
|
|
|
NETGEAR_BOARD_ID = WNDR3700v2
|
|
|
|
|
NETGEAR_KERNEL_MAGIC = 0x33373031
|
|
|
|
|
NETGEAR_HW_ID = 29763654+16+64
|
|
|
|
|
IMAGE_SIZE = 15872k
|
|
|
|
|
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
|
|
|
|
|
IMAGES := sysupgrade.bin factory.img
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/wndr3800
|
|
|
|
|
$(Device/wndr3700v2)
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := NETGEAR WNDR3800
|
2016-05-22 21:10:02 +00:00
|
|
|
NETGEAR_BOARD_ID = WNDR3800
|
|
|
|
|
NETGEAR_HW_ID = 29763654+16+128
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/wndr3800ch
|
|
|
|
|
$(Device/wndr3800)
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := NETGEAR WNDR3800 (Ch)
|
2016-05-22 21:10:02 +00:00
|
|
|
NETGEAR_BOARD_ID = WNDR3800CH
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/wndrmac
|
|
|
|
|
$(Device/wndr3700v2)
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := NETGEAR WNDRMAC
|
2016-05-22 21:10:02 +00:00
|
|
|
NETGEAR_BOARD_ID = WNDRMAC
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/wndrmacv2
|
|
|
|
|
$(Device/wndr3800)
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := NETGEAR WNDRMAC v2
|
2016-05-22 21:10:02 +00:00
|
|
|
NETGEAR_BOARD_ID = WNDRMACv2
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
|
|
|
|
|
|
|
|
|
|
define Device/cap324
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := PowerCloud CAP324 Cloud AP
|
|
|
|
|
DEVICE_PACKAGES := uboot-envtools
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME := CAP324
|
|
|
|
|
DEVICE_PROFILE := CAP324
|
|
|
|
|
IMAGE_SIZE = 15296k
|
2016-08-24 13:42:20 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += cap324
|
|
|
|
|
|
|
|
|
|
define Device/cap324-nocloud
|
2016-07-07 08:24:03 +00:00
|
|
|
DEVICE_TITLE := PowerCloud CAP324 Cloud AP (No-Cloud)
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_PACKAGES := uboot-envtools
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME := CAP324
|
|
|
|
|
DEVICE_PROFILE := CAP324
|
|
|
|
|
IMAGE_SIZE = 16000k
|
2016-08-24 13:42:20 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += cap324-nocloud
|
|
|
|
|
|
|
|
|
|
define Device/cr3000
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := PowerCloud CR3000 Cloud Router
|
|
|
|
|
DEVICE_PACKAGES := uboot-envtools
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME := CR3000
|
|
|
|
|
DEVICE_PROFILE := CR3000
|
|
|
|
|
IMAGE_SIZE = 7104k
|
2016-08-24 13:42:20 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += cr3000
|
|
|
|
|
|
|
|
|
|
define Device/cr3000-nocloud
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := PowerCloud CR3000 (No-Cloud)
|
|
|
|
|
DEVICE_PACKAGES := uboot-envtools
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME := CR3000
|
|
|
|
|
DEVICE_PROFILE := CR3000
|
|
|
|
|
IMAGE_SIZE = 7808k
|
2016-08-24 13:42:20 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += cr3000-nocloud
|
|
|
|
|
|
|
|
|
|
define Device/cr5000
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := PowerCloud CR5000 Cloud Router
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-core
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME := CR5000
|
|
|
|
|
DEVICE_PROFILE := CR5000
|
|
|
|
|
IMAGE_SIZE = 7104k
|
2016-08-24 13:42:20 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += cr5000
|
|
|
|
|
|
|
|
|
|
define Device/cr5000-nocloud
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := PowerCloud CR5000 (No-Cloud)
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := uboot-envtools kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-usb-core
|
2016-05-22 21:10:02 +00:00
|
|
|
BOARDNAME := CR5000
|
|
|
|
|
DEVICE_PROFILE := CR5000
|
|
|
|
|
IMAGE_SIZE = 7808k
|
2016-08-24 13:42:20 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += cr5000-nocloud
|
|
|
|
|
|
2017-01-10 09:47:19 +00:00
|
|
|
define Device/pqi-air-pen
|
|
|
|
|
DEVICE_TITLE := PQI Air Pen
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
|
|
|
|
|
BOARDNAME = PQI-AIR-PEN
|
|
|
|
|
IMAGE_SIZE = 7744k
|
|
|
|
|
CONSOLE = ttyATH0,115200
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += pqi-air-pen
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/antminer-s1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := Antminer-S1
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
|
|
|
|
|
BOARDNAME := ANTMINER-S1
|
|
|
|
|
DEVICE_PROFILE := ANTMINERS1
|
|
|
|
|
TPLINK_HWID := 0x04440101
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/antminer-s3
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := Antminer-S3
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
|
|
|
|
|
BOARDNAME := ANTMINER-S3
|
|
|
|
|
DEVICE_PROFILE := ANTMINERS3
|
|
|
|
|
TPLINK_HWID := 0x04440301
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/antrouter-r1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := Antrouter-R1
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME := ANTROUTER-R1
|
|
|
|
|
DEVICE_PROFILE := ANTROUTERR1
|
|
|
|
|
TPLINK_HWID := 0x44440101
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/el-m150
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := EasyLink EL-M150
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME := EL-M150
|
|
|
|
|
DEVICE_PROFILE := ELM150
|
|
|
|
|
TPLINK_HWID := 0x01500101
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/el-mini
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := EasyLink EL-MINI
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME := EL-MINI
|
|
|
|
|
DEVICE_PROFILE := ELMINI
|
|
|
|
|
TPLINK_HWID := 0x01530001
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += antminer-s1 antminer-s3 antrouter-r1 el-m150 el-mini
|
|
|
|
|
|
|
|
|
|
define Device/gl-inet-6408A-v1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := GL.iNet 6408
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME := GL-INET
|
|
|
|
|
DEVICE_PROFILE := GLINET
|
|
|
|
|
TPLINK_HWID := 0x08000001
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/gl-inet-6416A-v1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-16mlzma)
|
|
|
|
|
DEVICE_TITLE := GL.iNet 6416
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME := GL-INET
|
|
|
|
|
DEVICE_PROFILE := GLINET
|
|
|
|
|
TPLINK_HWID := 0x08000001
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
|
|
|
|
|
|
2016-07-08 13:03:00 +00:00
|
|
|
define Device/jwap230
|
|
|
|
|
DEVICE_TITLE := jjPlus JWAP230
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = JWAP230
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += jwap230
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/rnx-n360rt
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-4m)
|
|
|
|
|
DEVICE_TITLE := Rosewill RNX-N360RT
|
|
|
|
|
BOARDNAME := TL-WR941ND
|
|
|
|
|
DEVICE_PROFILE := RNXN360RT
|
|
|
|
|
TPLINK_HWID := 0x09410002
|
|
|
|
|
TPLINK_HWREV := 0x00420001
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += rnx-n360rt
|
|
|
|
|
|
|
|
|
|
define Device/mc-mac1200r
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
2017-01-31 21:26:39 +00:00
|
|
|
DEVICE_TITLE := Mercury MAC1200R
|
2016-07-22 13:57:49 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
2016-06-30 01:54:20 +00:00
|
|
|
BOARDNAME := MC-MAC1200R
|
|
|
|
|
DEVICE_PROFILE := MAC1200R
|
|
|
|
|
TPLINK_HWID := 0x12000001
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += mc-mac1200r
|
|
|
|
|
|
|
|
|
|
define Device/minibox-v1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-16mlzma)
|
|
|
|
|
DEVICE_TITLE := Gainstrong MiniBox V1.0
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
2016-06-30 01:54:20 +00:00
|
|
|
BOARDNAME := MINIBOX-V1
|
|
|
|
|
DEVICE_PROFILE := MINIBOXV1
|
|
|
|
|
TPLINK_HWID := 0x3C000201
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += minibox-v1
|
|
|
|
|
|
|
|
|
|
define Device/omy-g1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-16mlzma)
|
|
|
|
|
DEVICE_TITLE := OMYlink OMY-G1
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME := OMY-G1
|
|
|
|
|
DEVICE_PROFILE := OMYG1
|
|
|
|
|
TPLINK_HWID := 0x06660101
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/omy-x1
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := OMYlink OMY-X1
|
|
|
|
|
BOARDNAME := OMY-X1
|
|
|
|
|
DEVICE_PROFILE := OMYX1
|
|
|
|
|
TPLINK_HWID := 0x06660201
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += omy-g1 omy-x1
|
|
|
|
|
|
|
|
|
|
define Device/onion-omega
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-16mlzma)
|
|
|
|
|
DEVICE_TITLE := Onion Omega
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
|
|
|
|
|
BOARDNAME := ONION-OMEGA
|
|
|
|
|
DEVICE_PROFILE := OMEGA
|
|
|
|
|
TPLINK_HWID := 0x04700001
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += onion-omega
|
|
|
|
|
|
2017-01-15 22:01:05 +00:00
|
|
|
define Device/sc1750
|
|
|
|
|
DEVICE_TITLE := Abicom SC1750
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
|
|
|
|
|
BOARDNAME = SC1750
|
|
|
|
|
IMAGE_SIZE = 15744k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += sc1750
|
|
|
|
|
|
2017-01-15 22:01:03 +00:00
|
|
|
define Device/sc300m
|
|
|
|
|
DEVICE_TITLE := Abicom SC300M
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
|
|
|
|
|
BOARDNAME = SC300M
|
|
|
|
|
IMAGE_SIZE = 15744k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += sc300m
|
|
|
|
|
|
2017-01-15 22:01:04 +00:00
|
|
|
define Device/sc450
|
|
|
|
|
DEVICE_TITLE := Abicom SC450
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
|
|
|
|
|
BOARDNAME = SC450
|
|
|
|
|
IMAGE_SIZE = 15744k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += sc450
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/smart-300
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := NC-LINK SMART-300
|
|
|
|
|
BOARDNAME := SMART-300
|
|
|
|
|
DEVICE_PROFILE := SMART-300
|
|
|
|
|
TPLINK_HWID := 0x93410001
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += smart-300
|
|
|
|
|
|
2016-05-29 22:26:03 +00:00
|
|
|
define Device/som9331
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
DEVICE_TITLE := OpenEmbed SOM9331
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
|
|
|
|
|
BOARDNAME := SOM9331
|
|
|
|
|
DEVICE_PROFILE := SOM9331
|
|
|
|
|
TPLINK_HWID := 0x04800054
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-29 22:26:03 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += som9331
|
|
|
|
|
|
ar71xx: add support for YunCore SR3200 and XD3200
YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros
QCA9563+QCA9882+QCA8337N.
YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount
AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334.
Common specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB or RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm
- 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm
SR3200 specification:
- 5x 10/100/1000 Mbps Ethernet
- 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips)
- 3x LED (+ 5x LED in RJ45 sockets), 1x button
- UART header on PCB
XD3200 specification:
- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
- 4x internal antennas
- 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button
- UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB
LED for 5 GHz WLAN is currently not supported on both devices as it is
connected directly to the QCA9882 radio chip.
Flash instruction under vendor firmware, using telnet/SSH:
1. If your firmware does not have root password, go to point 5
2. Connect PC with 192.168.1.x address to LAN or WAN port
3. Power up device, enter failsafe mode with button (no LED indicator!)
4. Change root password and reboot (mount_root, passwd ..., reboot -f)
5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP
6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
7. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
- mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware
Flash instruction under U-Boot, using UART:
1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
5. saveenv && reset
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-02 21:42:41 +00:00
|
|
|
define Device/sr3200
|
|
|
|
|
DEVICE_TITLE := YunCore SR3200
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
|
|
|
|
|
BOARDNAME = SR3200
|
|
|
|
|
IMAGE_SIZE = 16000k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += sr3200
|
|
|
|
|
|
|
|
|
|
define Device/xd3200
|
|
|
|
|
$(Device/sr3200)
|
|
|
|
|
DEVICE_TITLE := YunCore XD3200
|
|
|
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
|
|
|
BOARDNAME = XD3200
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += xd3200
|
|
|
|
|
|
2016-05-22 21:10:02 +00:00
|
|
|
define Device/tellstick-znet-lite
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-16mlzma)
|
|
|
|
|
DEVICE_TITLE := TellStick ZNet Lite
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-acm kmod-usb-serial kmod-usb-serial-pl2303
|
|
|
|
|
BOARDNAME := TELLSTICK-ZNET-LITE
|
|
|
|
|
DEVICE_PROFILE := TELLSTICKZNETLITE
|
|
|
|
|
TPLINK_HWID := 0x00726001
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += tellstick-znet-lite
|
|
|
|
|
|
|
|
|
|
define Device/oolite
|
2016-06-30 01:54:20 +00:00
|
|
|
$(Device/tplink-16mlzma)
|
|
|
|
|
DEVICE_TITLE := Gainstrong OOLITE
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
2016-06-30 01:54:20 +00:00
|
|
|
BOARDNAME := GS-OOLITE
|
|
|
|
|
DEVICE_PROFILE := OOLITE
|
|
|
|
|
TPLINK_HWID := 0x3C000101
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += oolite
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
define Device/NBG6616
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := ZyXEL NBG6616
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
|
2016-06-17 04:53:22 +00:00
|
|
|
BOARDNAME = NBG6616
|
|
|
|
|
KERNEL_SIZE = 2048k
|
|
|
|
|
IMAGE_SIZE = 15323k
|
|
|
|
|
MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
|
|
|
|
|
CMDLINE += mem=128M
|
|
|
|
|
IMAGES := sysupgrade.bin
|
|
|
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
|
2016-09-11 17:05:20 +00:00
|
|
|
IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
2016-06-17 04:53:22 +00:00
|
|
|
# We cannot currently build a factory image. It is the sysupgrade image
|
|
|
|
|
# prefixed with a header (which is actually written into the MTD device).
|
|
|
|
|
# The header is 2kiB and is filled with 0xff. The format seems to be:
|
|
|
|
|
# 2 bytes: 0x0000
|
|
|
|
|
# 2 bytes: checksum of the data partition (big endian)
|
|
|
|
|
# 4 bytes: length of the contained image file (big endian)
|
|
|
|
|
# 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
|
|
|
|
|
# 2 bytes: 0x0000
|
|
|
|
|
# 2 bytes: checksum over the header partition (big endian)
|
|
|
|
|
# 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
|
|
|
|
|
# rest: 0xff padding
|
|
|
|
|
#
|
|
|
|
|
# The checksums are calculated by adding up all bytes and if a 16bit
|
|
|
|
|
# overflow occurs, one is added and the sum is masked to 16 bit:
|
|
|
|
|
# csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff };
|
|
|
|
|
# Should the file have an odd number of bytes then the byte len-0x800 is
|
|
|
|
|
# used additionally.
|
|
|
|
|
# The checksum for the header is calcualted over the first 2048 bytes with
|
|
|
|
|
# the firmware checksum as the placeholder during calculation.
|
|
|
|
|
#
|
|
|
|
|
# The header is padded with 0xff to the erase block size of the device.
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += NBG6616
|
|
|
|
|
|
|
|
|
|
define Device/c-55
|
2016-06-17 04:53:22 +00:00
|
|
|
DEVICE_TITLE := AirTight Networks C-55
|
|
|
|
|
DEVICE_PACKAGES := kmod-ath9k
|
|
|
|
|
BOARDNAME = C-55
|
|
|
|
|
KERNEL_SIZE = 2048k
|
|
|
|
|
IMAGE_SIZE = 15872k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
|
2016-09-11 17:05:20 +00:00
|
|
|
IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
2016-05-22 21:10:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += c-55
|
2016-06-20 14:25:50 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
define Build/uImageHiWiFi
|
|
|
|
|
# Field ih_name needs to start with "tw150v1"
|
|
|
|
|
mkimage -A $(LINUX_KARCH) \
|
|
|
|
|
-O linux -T kernel \
|
|
|
|
|
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
|
|
|
|
|
-n 'tw150v1 $(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
|
|
|
|
|
@mv $@.new $@
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/hiwifi-hc6361
|
2016-06-30 01:54:18 +00:00
|
|
|
DEVICE_TITLE := HiWiFi HC6361
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
|
|
|
|
|
kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs
|
|
|
|
|
BOARDNAME := HiWiFi-HC6361
|
|
|
|
|
DEVICE_PROFILE := HIWIFI_HC6361
|
|
|
|
|
IMAGE_SIZE := 16128k
|
|
|
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImageHiWiFi lzma
|
|
|
|
|
CONSOLE := ttyATH0,115200
|
|
|
|
|
MTDPARTS := spi0.0:64k(u-boot)ro,64k(bdinfo)ro,16128k(firmware),64k(backup)ro,64k(art)ro
|
2016-06-20 14:25:50 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += hiwifi-hc6361
|
2016-06-30 01:54:21 +00:00
|
|
|
|
|
|
|
|
|
2016-10-11 18:32:24 +00:00
|
|
|
define Build/seama
|
|
|
|
|
$(STAGING_DIR_HOST)/bin/seama -i $@ $(if $(1),$(1),-m "dev=/dev/mtdblock/1" -m "type=firmware")
|
2016-06-30 01:54:21 +00:00
|
|
|
mv $@.seama $@
|
|
|
|
|
endef
|
|
|
|
|
|
2016-10-11 18:32:24 +00:00
|
|
|
define Build/seama-seal
|
|
|
|
|
$(call Build/seama,-s $@.seama $(1))
|
2016-07-09 12:15:58 +00:00
|
|
|
endef
|
|
|
|
|
|
2016-06-30 01:54:21 +00:00
|
|
|
define Device/seama
|
2016-07-09 12:15:58 +00:00
|
|
|
LOADER_TYPE := bin
|
2016-10-11 18:32:24 +00:00
|
|
|
BLOCKSIZE := 64k
|
2016-10-11 18:32:25 +00:00
|
|
|
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
|
2016-10-11 18:32:24 +00:00
|
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama
|
2016-06-30 01:54:21 +00:00
|
|
|
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama
|
|
|
|
|
IMAGES := sysupgrade.bin factory.bin
|
2016-10-11 18:32:24 +00:00
|
|
|
|
|
|
|
|
# 64 bytes offset:
|
|
|
|
|
# - 28 bytes seama_header
|
|
|
|
|
# - 36 bytes of META data (4-bytes aligned)
|
|
|
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
|
|
|
IMAGE/sysupgrade.bin := \
|
|
|
|
|
$$(IMAGE/default) | seama | pad-rootfs | \
|
|
|
|
|
check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGE/factory.bin := \
|
|
|
|
|
$$(IMAGE/default) | seama | pad-rootfs | \
|
|
|
|
|
seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
|
|
|
|
|
check-size $$$$(IMAGE_SIZE)
|
2016-06-30 01:54:21 +00:00
|
|
|
SEAMA_SIGNATURE :=
|
2016-07-09 12:15:58 +00:00
|
|
|
DEVICE_VARS += SEAMA_SIGNATURE
|
2016-06-30 01:54:21 +00:00
|
|
|
endef
|
|
|
|
|
|
2016-10-11 18:32:26 +00:00
|
|
|
define Device/dir-869-a1
|
|
|
|
|
$(Device/seama)
|
|
|
|
|
DEVICE_TITLE := D-Link DIR-869 rev. A1
|
|
|
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
|
|
|
BOARDNAME = DIR-869-A1
|
|
|
|
|
IMAGE_SIZE = 15872k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
|
|
|
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
|
|
|
|
|
IMAGE/factory.bin := \
|
|
|
|
|
$$(IMAGE/default) | pad-rootfs -x 64 | \
|
|
|
|
|
seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
|
|
|
|
|
check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
|
2016-06-30 01:54:21 +00:00
|
|
|
define Device/mynet-n600
|
|
|
|
|
$(Device/seama)
|
|
|
|
|
DEVICE_TITLE := Western Digital My Net N600
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = MYNET-N600
|
|
|
|
|
IMAGE_SIZE = 15808k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
|
|
|
SEAMA_SIGNATURE := wrgnd16_wd_db600
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/mynet-n750
|
|
|
|
|
$(Device/seama)
|
|
|
|
|
DEVICE_TITLE := Western Digital My Net N750
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
BOARDNAME = MYNET-N750
|
|
|
|
|
IMAGE_SIZE = 15808k
|
|
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
|
|
|
SEAMA_SIGNATURE := wrgnd13_wd_av
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/qihoo-c301
|
|
|
|
|
$(Device/seama)
|
|
|
|
|
DEVICE_TITLE := Qihoo C301
|
2016-10-19 10:09:45 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
|
2016-06-30 01:54:21 +00:00
|
|
|
BOARDNAME = QIHOO-C301
|
|
|
|
|
IMAGE_SIZE = 15744k
|
2016-07-09 12:15:59 +00:00
|
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
|
2016-06-30 01:54:21 +00:00
|
|
|
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
|
|
|
|
|
endef
|
|
|
|
|
|
2016-10-11 18:32:26 +00:00
|
|
|
TARGET_DEVICES += dir-869-a1 mynet-n600 mynet-n750 qihoo-c301
|
2016-07-18 17:39:57 +00:00
|
|
|
|
|
|
|
|
define Build/mkwrggimg
|
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
|
|
|
|
|
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
|
|
|
|
|
-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
|
|
|
|
|
-v LEDE -B $(REVISION)
|
|
|
|
|
mv $@.imghdr $@
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Build/wrgg-pad-rootfs
|
|
|
|
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/dap-2695-a1
|
|
|
|
|
DEVICE_TITLE := D-Link DAP-2695 rev. A1
|
|
|
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k uboot-envtools
|
|
|
|
|
BOARDNAME = DAP-2695-A1
|
|
|
|
|
IMAGES := factory.img sysupgrade.bin
|
|
|
|
|
IMAGE_SIZE = 15360k
|
|
|
|
|
IMAGE/factory.img = append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGE/sysupgrade.bin = append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
|
|
|
|
|
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
|
|
|
|
|
MTDPARTS = spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
|
|
|
|
|
DAP_SIGNATURE := wapac02_dkbs_dap2695
|
|
|
|
|
DEVICE_VARS += DAP_SIGNATURE
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
TARGET_DEVICES += dap-2695-a1
|
2016-11-08 13:45:00 +00:00
|
|
|
|
|
|
|
|
define Build/mkbuffaloimg
|
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
|
|
|
|
|
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
|
|
|
|
|
-K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
|
|
|
|
|
-i $@ -o $@.new
|
|
|
|
|
mv $@.new $@
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/bhr-4grv2
|
|
|
|
|
DEVICE_TITLE := Buffalo BHR-4GRV2
|
|
|
|
|
BOARDNAME := BHR-4GRV2
|
|
|
|
|
ROOTFS_SIZE := 14528k
|
|
|
|
|
KERNEL_SIZE := 1472k
|
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
|
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
|
|
|
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
|
2016-12-09 08:53:15 +00:00
|
|
|
IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
|
2016-11-08 13:45:00 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += bhr-4grv2
|