ar71xx: add support for COMFAST CF-E380AC v1 and v2
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035. There are two versions of this model, with different RAM and U-Boot mtd partition sizes: - v1: 128 MB of RAM, 128 KB U-Boot image size - v2: 256 MB of RAM, 256 KB U-Boot image size Version number is available only inside vendor GUI, hardware and markings are the same. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 1x 10/100/1000 Mbps Ethernet, with PoE support - 128 or 256 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm - 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm - 6x internal antennas - 1x RGB LED, 1x button - UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
Piotr Dymacz
John Crispin
parent
31952dbd1c
commit
16afa08d19
12 changed files with 211 additions and 9 deletions
|
|
@ -120,6 +120,12 @@ cf-e320n-v2)
|
|||
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
|
||||
;;
|
||||
cf-e380ac-v1|\
|
||||
cf-e380ac-v2)
|
||||
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt"
|
||||
;;
|
||||
cf-e520n|\
|
||||
cf-e530n)
|
||||
ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
|
||||
|
|
|
|||
|
|
@ -66,6 +66,8 @@ ar71xx_setup_interfaces()
|
|||
bullet-m|\
|
||||
c-55|\
|
||||
cap4200ag|\
|
||||
cf-e380ac-v1|\
|
||||
cf-e380ac-v2|\
|
||||
eap120|\
|
||||
eap300v2|\
|
||||
eap7660d|\
|
||||
|
|
|
|||
|
|
@ -94,6 +94,10 @@ get_status_led() {
|
|||
cf-e320n-v2)
|
||||
status_led="$board:blue:wlan"
|
||||
;;
|
||||
cf-e380ac-v1|\
|
||||
cf-e380ac-v2)
|
||||
status_led="$board:blue:wlan2g"
|
||||
;;
|
||||
cpe510)
|
||||
status_led="tp-link:green:link4"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -47,13 +47,15 @@ board=$(ar71xx_board_name)
|
|||
case "$FIRMWARE" in
|
||||
"ath10k/cal-pci-0000:00:00.0.bin")
|
||||
case $board in
|
||||
cf-e380ac-v1|\
|
||||
cf-e380ac-v2|\
|
||||
dlan-pro-1200-ac)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
;;
|
||||
dap-2695-a1)
|
||||
ath10kcal_extract "radiocfg" 20480 2116
|
||||
ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
|
||||
;;
|
||||
dlan-pro-1200-ac)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
;;
|
||||
dw33d)
|
||||
ath10kcal_extract "art" 20480 2116
|
||||
ath10kcal_patch_mac $(mtd_get_mac_binary art 18)
|
||||
|
|
|
|||
|
|
@ -503,6 +503,12 @@ ar71xx_board_detect() {
|
|||
*"CF-E320N v2")
|
||||
name="cf-e320n-v2"
|
||||
;;
|
||||
*"CF-E380AC v1")
|
||||
name="cf-e380ac-v1"
|
||||
;;
|
||||
*"CF-E380AC v2")
|
||||
name="cf-e380ac-v2"
|
||||
;;
|
||||
*CF-E520N)
|
||||
name="cf-e520n"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -183,6 +183,8 @@ platform_check_image() {
|
|||
carambola2|\
|
||||
cf-e316n-v2|\
|
||||
cf-e320n-v2|\
|
||||
cf-e380ac-v1|\
|
||||
cf-e380ac-v2|\
|
||||
cf-e520n|\
|
||||
cf-e530n|\
|
||||
dgl-5500-a1|\
|
||||
|
|
|
|||
|
|
@ -63,6 +63,8 @@ CONFIG_ATH79_MACH_CAP4200AG=y
|
|||
CONFIG_ATH79_MACH_CARAMBOLA2=y
|
||||
CONFIG_ATH79_MACH_CF_E316N_V2=y
|
||||
CONFIG_ATH79_MACH_CF_E320N_V2=y
|
||||
CONFIG_ATH79_MACH_CF_E380AC_V1=y
|
||||
CONFIG_ATH79_MACH_CF_E380AC_V2=y
|
||||
CONFIG_ATH79_MACH_CF_E520N=y
|
||||
CONFIG_ATH79_MACH_CF_E530N=y
|
||||
CONFIG_ATH79_MACH_CPE510=y
|
||||
|
|
|
|||
|
|
@ -1696,6 +1696,28 @@ config ATH79_MACH_CF_E320N_V2
|
|||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E380AC_V1
|
||||
bool "COMFAST CF-E380AC v1 support"
|
||||
select SOC_QCA955X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E380AC_V2
|
||||
bool "COMFAST CF-E380AC v2 support"
|
||||
select SOC_QCA955X
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_CF_E520N
|
||||
bool "COMFAST CF-E520N support"
|
||||
select SOC_QCA953X
|
||||
|
|
|
|||
|
|
@ -69,6 +69,8 @@ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
|
|||
obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E380AC_V1) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
|
||||
|
|
|
|||
|
|
@ -2,9 +2,11 @@
|
|||
* Support for COMFAST boards:
|
||||
* - CF-E316N v2 (AR9341)
|
||||
* - CF-E320N v2 (QCA9531)
|
||||
* - CF-E380AC v1/v2 (QCA9558)
|
||||
* - CF-E520N/CF-E530N (QCA9531)
|
||||
*
|
||||
* Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
|
||||
* Copyright (C) 2016 Gareth Parker <gareth41@orcon.net.nz>
|
||||
* Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
|
|
@ -13,6 +15,7 @@
|
|||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/platform_data/phy-at803x.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/timer.h>
|
||||
|
||||
|
|
@ -20,6 +23,7 @@
|
|||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
|
|
@ -126,6 +130,70 @@ static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
|
|||
},
|
||||
};
|
||||
|
||||
/* CF-E380AC v1/v2 */
|
||||
#define CF_E380AC_V1V2_GPIO_LED_LAN 0
|
||||
#define CF_E380AC_V1V2_GPIO_LED_WLAN2G 2
|
||||
#define CF_E380AC_V1V2_GPIO_LED_WLAN5G 3
|
||||
|
||||
#define CF_E380AC_V1V2_GPIO_EXT_WDT 17
|
||||
|
||||
#define CF_E380AC_V1V2_GPIO_BTN_RESET 19
|
||||
|
||||
static struct gpio_led cf_e380ac_v1_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "cf-e380ac-v1:green:lan",
|
||||
.gpio = CF_E380AC_V1V2_GPIO_LED_LAN,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e380ac-v1:blue:wlan2g",
|
||||
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN2G,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e380ac-v1:red:wlan5g",
|
||||
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN5G,
|
||||
.active_low = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led cf_e380ac_v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "cf-e380ac-v2:green:lan",
|
||||
.gpio = CF_E380AC_V1V2_GPIO_LED_LAN,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e380ac-v2:blue:wlan2g",
|
||||
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN2G,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "cf-e380ac-v2:red:wlan5g",
|
||||
.gpio = CF_E380AC_V1V2_GPIO_LED_WLAN5G,
|
||||
.active_low = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button cf_e380ac_v1v2_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = CF_E380AC_V1V2_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct at803x_platform_data cf_e380ac_v1v2_at803x_data = {
|
||||
.disable_smarteee = 1,
|
||||
};
|
||||
|
||||
static struct mdio_board_info cf_e380ac_v1v2_mdio0_info[] = {
|
||||
{
|
||||
.bus_id = "ag71xx-mdio.0",
|
||||
.phy_addr = 0,
|
||||
.platform_data = &cf_e380ac_v1v2_at803x_data,
|
||||
},
|
||||
};
|
||||
|
||||
/* CF-E520N/CF-E530N */
|
||||
#define CF_E5X0N_GPIO_LED_WAN 11
|
||||
#define CF_E5X0N_GPIO_BTN_RESET 17
|
||||
|
|
@ -166,9 +234,9 @@ static void gpio_wdt_toggle(unsigned long gpio)
|
|||
jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
|
||||
}
|
||||
|
||||
static void __init cf_exxxn_common_setup(int gpio_wdt)
|
||||
static void __init cf_exxxn_common_setup(unsigned long art_ofs, int gpio_wdt)
|
||||
{
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1f011000);
|
||||
u8 *art = (u8 *) KSEG1ADDR(0x1f001000 + art_ofs);
|
||||
|
||||
if (gpio_wdt > -1) {
|
||||
gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
|
||||
|
|
@ -189,7 +257,7 @@ static void __init cf_e316n_v2_setup(void)
|
|||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
|
||||
|
||||
cf_exxxn_common_setup(CF_E316N_V2_GPIO_EXT_WDT);
|
||||
cf_exxxn_common_setup(0x10000, CF_E316N_V2_GPIO_EXT_WDT);
|
||||
|
||||
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
||||
|
||||
|
|
@ -255,7 +323,7 @@ static void __init cf_exxxn_qca953x_eth_setup(void)
|
|||
|
||||
static void __init cf_e320n_v2_setup(void)
|
||||
{
|
||||
cf_exxxn_common_setup(CF_E320N_V2_GPIO_EXT_WDT);
|
||||
cf_exxxn_common_setup(0x10000, CF_E320N_V2_GPIO_EXT_WDT);
|
||||
|
||||
cf_exxxn_qca953x_eth_setup();
|
||||
|
||||
|
|
@ -287,6 +355,71 @@ static void __init cf_e320n_v2_setup(void)
|
|||
MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
|
||||
cf_e320n_v2_setup);
|
||||
|
||||
static void __init cf_e380ac_v1v2_common_setup(unsigned long art_ofs)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f000000 + art_ofs);
|
||||
|
||||
cf_exxxn_common_setup(art_ofs, CF_E380AC_V1V2_GPIO_EXT_WDT);
|
||||
|
||||
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
mdiobus_register_board_info(cf_e380ac_v1v2_mdio0_info,
|
||||
ARRAY_SIZE(cf_e380ac_v1v2_mdio0_info));
|
||||
|
||||
/* LAN */
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(0);
|
||||
ath79_eth0_pll_data.pll_1000 = 0xbe000000;
|
||||
ath79_eth0_pll_data.pll_100 = 0xb0000101;
|
||||
ath79_eth0_pll_data.pll_10 = 0xb0001313;
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
ap91_pci_init(mac + 0x5000, NULL);
|
||||
|
||||
/* Disable JTAG (enables GPIO0-3) */
|
||||
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
||||
|
||||
ath79_gpio_direction_select(CF_E380AC_V1V2_GPIO_LED_LAN, true);
|
||||
ath79_gpio_direction_select(CF_E380AC_V1V2_GPIO_LED_WLAN2G, true);
|
||||
ath79_gpio_direction_select(CF_E380AC_V1V2_GPIO_LED_WLAN5G, true);
|
||||
|
||||
ath79_gpio_output_select(CF_E380AC_V1V2_GPIO_LED_LAN, 0);
|
||||
ath79_gpio_output_select(CF_E380AC_V1V2_GPIO_LED_WLAN2G, 0);
|
||||
ath79_gpio_output_select(CF_E380AC_V1V2_GPIO_LED_WLAN5G, 0);
|
||||
|
||||
/* For J7-4 */
|
||||
ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(cf_e380ac_v1v2_gpio_keys),
|
||||
cf_e380ac_v1v2_gpio_keys);
|
||||
}
|
||||
|
||||
static void __init cf_e380ac_v1_setup(void)
|
||||
{
|
||||
cf_e380ac_v1v2_common_setup(0x20000);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v1_leds_gpio),
|
||||
cf_e380ac_v1_leds_gpio);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_CF_E380AC_V1, "CF-E380AC-V1", "COMFAST CF-E380AC v1",
|
||||
cf_e380ac_v1_setup);
|
||||
|
||||
static void __init cf_e380ac_v2_setup(void)
|
||||
{
|
||||
cf_e380ac_v1v2_common_setup(0x40000);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v2_leds_gpio),
|
||||
cf_e380ac_v2_leds_gpio);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_CF_E380AC_V2, "CF-E380AC-V2", "COMFAST CF-E380AC v2",
|
||||
cf_e380ac_v2_setup);
|
||||
|
||||
static void __init cf_e5x0n_gpio_setup(void)
|
||||
{
|
||||
ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
|
||||
|
|
@ -300,7 +433,7 @@ static void __init cf_e5x0n_gpio_setup(void)
|
|||
|
||||
static void __init cf_e520n_setup(void)
|
||||
{
|
||||
cf_exxxn_common_setup(-1);
|
||||
cf_exxxn_common_setup(0x10000, -1);
|
||||
|
||||
cf_exxxn_qca953x_eth_setup();
|
||||
|
||||
|
|
@ -315,7 +448,7 @@ MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
|
|||
|
||||
static void __init cf_e530n_setup(void)
|
||||
{
|
||||
cf_exxxn_common_setup(-1);
|
||||
cf_exxxn_common_setup(0x10000, -1);
|
||||
|
||||
cf_exxxn_qca953x_eth_setup();
|
||||
|
||||
|
|
|
|||
|
|
@ -54,6 +54,8 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
|
||||
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
|
||||
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
|
||||
ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC v1 */
|
||||
ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */
|
||||
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
|
||||
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
|
||||
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
|
||||
|
|
|
|||
|
|
@ -35,6 +35,25 @@ define Device/cf-e320n-v2
|
|||
endef
|
||||
TARGET_DEVICES += cf-e320n-v2
|
||||
|
||||
define Device/cf-e380ac-v1
|
||||
DEVICE_TITLE := COMFAST CF-E380AC v1
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
|
||||
BOARDNAME = CF-E380AC-V1
|
||||
IMAGE_SIZE = 16128k
|
||||
CONSOLE = ttyS0,115200
|
||||
MTDPARTS = spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
|
||||
endef
|
||||
TARGET_DEVICES += cf-e380ac-v1
|
||||
|
||||
define Device/cf-e380ac-v2
|
||||
$(Device/cf-e380ac-v1)
|
||||
DEVICE_TITLE := COMFAST CF-E380AC v2
|
||||
BOARDNAME = CF-E380AC-V2
|
||||
IMAGE_SIZE = 16000k
|
||||
MTDPARTS = spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
|
||||
endef
|
||||
TARGET_DEVICES += cf-e380ac-v2
|
||||
|
||||
define Device/cf-e520n
|
||||
DEVICE_TITLE := COMFAST CF-E520N
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
||||
|
|
|
|||
Loading…
Reference in a new issue