openwrtv4/target/linux/brcm63xx/dts/homehub2a.dts

/dts-v1/;

#include "bcm6358.dtsi"

#include <dt-bindings/input/input.h>

/ {
	model = "BT Home Hub 2.0 Type A";
	compatible = "thomson,homehub2a", "brcm,bcm6358";

	chosen {
		bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		debounce-interval = <60>;

		phone {
			label = "phone";
			gpios = <&pinctrl 1 1>;
			linux,code = <KEY_PHONE>;
		};
		reset {
			label = "reset";
			gpios = <&pinctrl 9 1>;
			linux,code = <KEY_RESTART>;
		};
		wps {
			label = "wps";
			gpios = <&pinctrl 11 1>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};
};

&leds {
	status = "ok";

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_serial_led>;

	led@0 {
		reg = <0>;
		active-low;
		label = "HOMEHUB2A:red:power";
	};

	led@1 {
		reg = <0>;
		active-low;
		label = "HOMEHUB2A:green:power";
		default-state = "on";
	};

	led@2 {
		reg = <2>;
		active-low;
		label = "HOMEHUB2A:blue:power";
	};

	led@3 {
		reg = <3>;
		active-low;
		label = "HOMEHUB2A:red:broadband";
	};

	led@4 {
		reg = <4>;
		active-low;
		label = "HOMEHUB2A:green:broadband";
	};

	led@5 {
		reg = <5>;
		active-low;
		label = "HOMEHUB2A:blue:broadband";
	};

	led@6 {
		reg = <6>;
		active-low;
		label = "HOMEHUB2A:red:wireless";
	};

	led@7 {
		reg = <7>;
		active-low;
		label = "HOMEHUB2A:green:wireless";
	};

	led@8 {
		reg = <8>;
		active-low;
		label = "HOMEHUB2A:blue:wireless";
	};

	led@9 {
		reg = <9>;
		active-low;
		label = "HOMEHUB2A:red:phone";
	};

	led@10 {
		reg = <10>;
		active-low;
		label = "HOMEHUB2A:green:phone";
	};

	led@11 {
		reg = <11>;
		active-low;
		label = "HOMEHUB2A:blue:phone";
	};

	led@12 {
		reg = <12>;
		active-low;
		label = "HOMEHUB2A:red:upgrading";
	};

	led@13 {
		reg = <13>;
		active-low;
		label = "HOMEHUB2A:green:upgrading";
	};

	led@14 {
		reg = <14>;
		active-low;
		label = "HOMEHUB2A:blue:upgrading";
	};
};

&pflash {
	status = "ok";

	linux,part-probe = "bcm63xxpart";

	cfe@0 {
		label = "CFE";
		reg = <0x000000 0x020000>;
	};

	linux@20000 {
		label = "linux";
		reg = <0x020000 0xfc0000>;
	};

	nvram@fe0000 {
		label = "nvram";
		reg = <0xfe0000 0x020000>;
	};
};