openwrtv4/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

if RALINK_RT305X

menu "Ralink RT350x machine selection"

config RT305X_MACH_WR6202
	bool "Accton WR6202"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_ALL0256N
	bool "Allnet ALL0256N support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_W502U
	bool "ALFA Networks W502U board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_ARGUS_ATP52B
	bool "Argus ATP-52B support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_RT_G32_REVB
	bool "Asus RT-G32 revB board support"
	select RALINK_DEV_GPIO_BUTTONS

config RT305X_MACH_HW550_3G
	bool "Aztech HW550-3G support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_F5D8235_V2
	bool "Belkin F5D8235 v2 support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WHR_G300N
	bool "Buffalo WHR-G300N support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_DIR_300_REVB
	bool "D-Link DIR-300 revB board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_ESR_9753
	bool "EnGenius ESR-9753 support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_FONERA20N
	bool "La Fonera20N board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_MOFI3500_3GN
	bool "MoFi Network MOFI3500-3GN support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WR512_3GN
	bool "SH-WR512NU/WS-WR512N1-like 3GN router"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_NW718
	bool "Netcore NW718"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_BC2
	bool "NexAira BC2"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_OMNI_EMB
	bool "Omnima MiniEMBWiFi"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_PWH2004
	bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_V22RW_2X2
	bool "Ralink AP-RT3052-V22RW-2X2 board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WL341V3
	bool "Sitecom WL-341 v3 board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WL351
	bool "Sitecom WL-351 support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_SL_R7205
	bool "Skyline SL-R7205 Wireless 3G Router support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WCR150GN
	bool "Sparklan WCR-150GN support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_NBG_419N
	bool "ZyXEL NBG-419N support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

endmenu

endif
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`if RALINK_RT305X`

			`menu "Ralink RT350x machine selection"`

ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN This patch adds support for the Accton WR6202 Mini 3G broadband router. Full details for this device are available at http://www.awbnetworks.com/products03.php?Fullkey=19. This device is identical to the SMCWBR11S-3GN: http://www.smc-asia.com/products03.php?Fullkey=210 It's also worth noting that this board has a GPIO line to control the power to the USB port. [juhosg: - fix checkpatch warnings, - reorder Kconfig entry, - merge the sysupgrade patch, - add GPL header] Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com> SVN-Revision: 30434 2012-02-11 15:11:36 +00:00			`config RT305X_MACH_WR6202`
			`bool "Accton WR6202"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add kernel support for ALL0256N Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29882 2012-01-24 11:48:45 +00:00			`config RT305X_MACH_ALL0256N`
			`bool "Allnet ALL0256N support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: add support for the ALFA Networks W502U (R36) board SVN-Revision: 29615 2011-12-28 08:43:32 +00:00			`config RT305X_MACH_W502U`
			`bool "ALFA Networks W502U board support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Argus ATP-52B [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991 2011-08-15 14:11:45 +00:00			`config RT305X_MACH_ARGUS_ATP52B`
			`bool "Argus ATP-52B support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: add support for the Asus RT-G32 B1 board Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812 2011-07-28 10:56:30 +00:00			`config RT305X_MACH_RT_G32_REVB`
			`bool "Asus RT-G32 revB board support"`
			`select RALINK_DEV_GPIO_BUTTONS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_HW550_3G`
			`bool "Aztech HW550-3G support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Belkin F5D8235 v2 board No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 24126 2010-11-24 10:01:23 +00:00			`config RT305X_MACH_F5D8235_V2`
			`bool "Belkin F5D8235 v2 support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`config RT305X_MACH_WHR_G300N`
			`bool "Buffalo WHR-G300N support"`
ramips: register gpio buttons on the WHR-G300N board SVN-Revision: 19412 2010-01-30 15:25:49 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
add common GPIO LED support SVN-Revision: 17448 2009-08-31 09:14:14 +00:00			`select RALINK_DEV_GPIO_LEDS`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00
ramips: add preliminary support for the DIR-300 revB board SVN-Revision: 18058 2009-10-18 08:48:07 +00:00			`config RT305X_MACH_DIR_300_REVB`
			`bool "D-Link DIR-300 revB board support"`
ramips: register gpio buttons on the DIR-300 revB board SVN-Revision: 19410 2010-01-30 15:25:44 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
ramips: add preliminary support for the DIR-300 revB board SVN-Revision: 18058 2009-10-18 08:48:07 +00:00			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603 2011-12-23 14:27:10 +00:00			`config RT305X_MACH_ESR_9753`
			`bool "EnGenius ESR-9753 support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_FONERA20N`
			`bool "La Fonera20N board support"`
ramips: add support for Sparklan WCR-150GN board This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 22658 2010-08-15 09:43:07 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_MOFI3500_3GN`
			`bool "MoFi Network MOFI3500-3GN support"`
ramips: register gpio buttons on the Fonera 2.0N board SVN-Revision: 19413 2010-01-30 15:25:52 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
adds mach type for fonera20n SVN-Revision: 18132 2009-10-24 20:55:36 +00:00			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052 2011-08-19 15:55:10 +00:00			`config RT305X_MACH_WR512_3GN`
			`bool "SH-WR512NU/WS-WR512N1-like 3GN router"`
ramips: remove 'default [yn]' keywords from machine Kconfig entries SVN-Revision: 28054 2011-08-19 15:55:12 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`
ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052 2011-08-19 15:55:10 +00:00
ramips: rt305x: add support for the Netcore NW718 board SVN-Revision: 27813 2011-07-28 10:56:32 +00:00			`config RT305X_MACH_NW718`
			`bool "Netcore NW718"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: Support for NexAira BC2 The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571 2011-10-24 21:49:36 +00:00			`config RT305X_MACH_BC2`
			`bool "NexAira BC2"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Omnima MiniEMBWiFi board This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533 2011-12-14 20:51:26 +00:00			`config RT305X_MACH_OMNI_EMB`
			`bool "Omnima MiniEMBWiFi"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> SVN-Revision: 23129 2010-09-27 14:43:34 +00:00			`config RT305X_MACH_PWH2004`
			`bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_V22RW_2X2`
			`bool "Ralink AP-RT3052-V22RW-2X2 board support"`
ramips: initial board support for Aztech HW550-3G This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26123 2011-03-13 16:34:52 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910 2012-01-26 10:44:23 +00:00			`config RT305X_MACH_WL341V3`
			`bool "Sitecom WL-341 v3 board support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604 2011-12-23 14:27:16 +00:00			`config RT305X_MACH_WL351`
			`bool "Sitecom WL-351 support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router [juhosg: - don't switch back to 2.6.39 - update config-3.2 - change machine id to SL-R7205 - reorder case entries in platform scripts - remove button hotplug script] Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com> SVN-Revision: 30645 2012-02-19 16:44:49 +00:00			`config RT305X_MACH_SL_R7205`
			`bool "Skyline SL-R7205 Wireless 3G Router support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_WCR150GN`
			`bool "Sparklan WCR-150GN support"`
ramips: initial board support for MOFI3500-3GN This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26466 2011-04-04 08:43:07 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: add support for the ZyXEL NBG-419N board SVN-Revision: 28078 2011-08-22 20:41:49 +00:00			`config RT305X_MACH_NBG_419N`
			`bool "ZyXEL NBG-419N support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`endmenu`

			`endif`