openwrtv4/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

if RALINK_RT305X

menu "Ralink RT350x machine selection"

config RT305X_MACH_ARGUS_ATP52B
	bool "Argus ATP-52B support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_RT_G32_REVB
	bool "Asus RT-G32 revB board support"
	select RALINK_DEV_GPIO_BUTTONS

config RT305X_MACH_HW550_3G
	bool "Aztech HW550-3G support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_F5D8235_V2
	bool "Belkin F5D8235 v2 support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WHR_G300N
	bool "Buffalo WHR-G300N support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_DIR_300_REVB
	bool "D-Link DIR-300 revB board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_ESR_9753
	bool "EnGenius ESR-9753 support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_FONERA20N
	bool "La Fonera20N board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_MOFI3500_3GN
	bool "MoFi Network MOFI3500-3GN support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WR512_3GN
	bool "SH-WR512NU/WS-WR512N1-like 3GN router"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_NW718
	bool "Netcore NW718"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_BC2
	bool "NexAira BC2"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_OMNI_EMB
	bool "Omnima MiniEMBWiFi"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_PWH2004
	bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_V22RW_2X2
	bool "Ralink AP-RT3052-V22RW-2X2 board support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WL351
	bool "Sitecom WL-351 support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_WCR150GN
	bool "Sparklan WCR-150GN support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

config RT305X_MACH_NBG_419N
	bool "ZyXEL NBG-419N support"
	select RALINK_DEV_GPIO_BUTTONS
	select RALINK_DEV_GPIO_LEDS

endmenu

endif
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`if RALINK_RT305X`

			`menu "Ralink RT350x machine selection"`

ramips: add support for Argus ATP-52B [The ESW related changes has been removed - juhosg] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 27991 2011-08-15 14:11:45 +00:00			`config RT305X_MACH_ARGUS_ATP52B`
			`bool "Argus ATP-52B support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: add support for the Asus RT-G32 B1 board Based on a patch by: Sergiy <piratfm@gmail.com> SVN-Revision: 27812 2011-07-28 10:56:30 +00:00			`config RT305X_MACH_RT_G32_REVB`
			`bool "Asus RT-G32 revB board support"`
			`select RALINK_DEV_GPIO_BUTTONS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_HW550_3G`
			`bool "Aztech HW550-3G support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Belkin F5D8235 v2 board No support for usb for now. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 24126 2010-11-24 10:01:23 +00:00			`config RT305X_MACH_F5D8235_V2`
			`bool "Belkin F5D8235 v2 support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`config RT305X_MACH_WHR_G300N`
			`bool "Buffalo WHR-G300N support"`
ramips: register gpio buttons on the WHR-G300N board SVN-Revision: 19412 2010-01-30 15:25:49 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
add common GPIO LED support SVN-Revision: 17448 2009-08-31 09:14:14 +00:00			`select RALINK_DEV_GPIO_LEDS`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00
ramips: add preliminary support for the DIR-300 revB board SVN-Revision: 18058 2009-10-18 08:48:07 +00:00			`config RT305X_MACH_DIR_300_REVB`
			`bool "D-Link DIR-300 revB board support"`
ramips: register gpio buttons on the DIR-300 revB board SVN-Revision: 19410 2010-01-30 15:25:44 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
ramips: add preliminary support for the DIR-300 revB board SVN-Revision: 18058 2009-10-18 08:48:07 +00:00			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for the Senao/EnGenius ESR-9753 board Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603 2011-12-23 14:27:10 +00:00			`config RT305X_MACH_ESR_9753`
			`bool "EnGenius ESR-9753 support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_FONERA20N`
			`bool "La Fonera20N board support"`
ramips: add support for Sparklan WCR-150GN board This patch adds support for Sparklan WCR-150GN board. Network configuration should be tweaked to make it work fully. The reason it's not in this patch is that ramips target should be modified to support different /etc/config/network files for different boards. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 22658 2010-08-15 09:43:07 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_MOFI3500_3GN`
			`bool "MoFi Network MOFI3500-3GN support"`
ramips: register gpio buttons on the Fonera 2.0N board SVN-Revision: 19413 2010-01-30 15:25:52 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
adds mach type for fonera20n SVN-Revision: 18132 2009-10-24 20:55:36 +00:00			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052 2011-08-19 15:55:10 +00:00			`config RT305X_MACH_WR512_3GN`
			`bool "SH-WR512NU/WS-WR512N1-like 3GN router"`
ramips: remove 'default [yn]' keywords from machine Kconfig entries SVN-Revision: 28054 2011-08-19 15:55:12 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`
ramips: rt305x: support for wr512-3gn-like routers Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28052 2011-08-19 15:55:10 +00:00
ramips: rt305x: add support for the Netcore NW718 board SVN-Revision: 27813 2011-07-28 10:56:32 +00:00			`config RT305X_MACH_NW718`
			`bool "Netcore NW718"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: Support for NexAira BC2 The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571 2011-10-24 21:49:36 +00:00			`config RT305X_MACH_BC2`
			`bool "NexAira BC2"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: add support for Omnima MiniEMBWiFi board This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533 2011-12-14 20:51:26 +00:00			`config RT305X_MACH_OMNI_EMB`
			`bool "Omnima MiniEMBWiFi"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) The attached patch adds a preliminary support for Prolink PWH2004 board (Ralink RT305x based). LAN and flash appear to work. However, the USB port and WLAN I have not managed to activate properly yet, but that problem appears to be present with other rt305x targets as well(?). Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi> SVN-Revision: 23129 2010-09-27 14:43:34 +00:00			`config RT305X_MACH_PWH2004`
			`bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_V22RW_2X2`
			`bool "Ralink AP-RT3052-V22RW-2X2 board support"`
ramips: initial board support for Aztech HW550-3G This patch adds initial support for the Aztech HW550-3G (Ralink RT3052f SoC, 8MB flash, 32MB dram). Ethernet is not working yet. Wireless appears to work fine. USB does not work yet (as with other Ralink boards). Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26123 2011-03-13 16:34:52 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: initial support for Sitecom WL-351 v1 002 This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604 2011-12-23 14:27:16 +00:00			`config RT305X_MACH_WL351`
			`bool "Sitecom WL-351 support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: sort Kconfig/Makefile entries SVN-Revision: 27805 2011-07-28 10:56:19 +00:00			`config RT305X_MACH_WCR150GN`
			`bool "Sparklan WCR-150GN support"`
ramips: initial board support for MOFI3500-3GN This patch adds initial board support for the MoFi Network MOFI3500-3GN (Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG). This router is basically the NA version of the HW550-3G. Signed-off-by: Layne Edwards <ledwards76@gmail.com> SVN-Revision: 26466 2011-04-04 08:43:07 +00:00			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

ramips: rt305x: add support for the ZyXEL NBG-419N board SVN-Revision: 28078 2011-08-22 20:41:49 +00:00			`config RT305X_MACH_NBG_419N`
			`bool "ZyXEL NBG-419N support"`
			`select RALINK_DEV_GPIO_BUTTONS`
			`select RALINK_DEV_GPIO_LEDS`

initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`endmenu`

			`endif`