2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_DEV_AP9X_PCI=y
|
|
|
|
|
CONFIG_ATH79_DEV_ETH=y
|
|
|
|
|
CONFIG_ATH79_DEV_GPIO_BUTTONS=y
|
|
|
|
|
CONFIG_ATH79_DEV_LEDS_GPIO=y
|
|
|
|
|
CONFIG_ATH79_DEV_M25P80=y
|
|
|
|
|
CONFIG_ATH79_DEV_NFC=y
|
|
|
|
|
CONFIG_ATH79_DEV_SPI=y
|
|
|
|
|
CONFIG_ATH79_DEV_USB=y
|
|
|
|
|
CONFIG_ATH79_DEV_WMAC=y
|
|
|
|
|
CONFIG_ATH79_MACH_A60=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALFA_AP120C=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALFA_AP96=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALFA_NX=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALL0258N=y
|
|
|
|
|
CONFIG_ATH79_MACH_ALL0315N=y
|
|
|
|
|
CONFIG_ATH79_MACH_ANTMINER_S1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ANTMINER_S3=y
|
|
|
|
|
CONFIG_ATH79_MACH_ANTROUTER_R1=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP121=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP121F=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP132=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP136=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP143=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP147=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP152=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP531B0=y
|
|
|
|
|
CONFIG_ATH79_MACH_AP90Q=y
|
2017-12-18 13:51:28 +00:00
|
|
|
CONFIG_ATH79_MACH_AP91_5G=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_AP96=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C58_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARCHER_C7=y
|
|
|
|
|
CONFIG_ATH79_MACH_ARDUINO_YUN=y
|
|
|
|
|
CONFIG_ATH79_MACH_AW_NR580=y
|
|
|
|
|
CONFIG_ATH79_MACH_BHR_4GRV2=y
|
|
|
|
|
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
|
|
|
|
|
CONFIG_ATH79_MACH_BSB=y
|
|
|
|
|
CONFIG_ATH79_MACH_C55=y
|
|
|
|
|
CONFIG_ATH79_MACH_CAP324=y
|
|
|
|
|
CONFIG_ATH79_MACH_CAP4200AG=y
|
|
|
|
|
CONFIG_ATH79_MACH_CARAMBOLA2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E316N_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E320N_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E355AC=y
|
2018-02-07 03:47:52 +00:00
|
|
|
CONFIG_ATH79_MACH_CF_E375AC=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_CF_E380AC_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E380AC_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E520N=y
|
|
|
|
|
CONFIG_ATH79_MACH_CF_E530N=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE505N=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE510=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE830=y
|
|
|
|
|
CONFIG_ATH79_MACH_CPE870=y
|
|
|
|
|
CONFIG_ATH79_MACH_CR3000=y
|
|
|
|
|
CONFIG_ATH79_MACH_CR5000=y
|
|
|
|
|
CONFIG_ATH79_MACH_DAP_2695_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DB120=y
|
|
|
|
|
CONFIG_ATH79_MACH_DGL_5500_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DHP_1565_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_505_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_825_B1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_825_C1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DIR_869_A1=y
|
|
|
|
|
CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
|
|
|
|
|
CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
|
|
|
|
|
CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
|
|
|
|
|
CONFIG_ATH79_MACH_DR342=y
|
|
|
|
|
CONFIG_ATH79_MACH_DR344=y
|
|
|
|
|
CONFIG_ATH79_MACH_DR531=y
|
|
|
|
|
CONFIG_ATH79_MACH_DRAGINO2=y
|
ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2
WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334.
Specification:
- 750/400/250 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11)
- 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11)
- 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 1x USB 2.0
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (J5) and LEDs (J13) headers on PCB
WHQX E600G is based on Qualcomm QCA9531.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (with PCIe and USB 2.0 buses)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB
WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11)
- 2x 10/100 Mbps Ethernet
- 6x LED (1x RGB, 5 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-12 V)
- UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB
Important notice:
First version of these boards are using different mtd layout, with ART
data at the end. You should not use v2 images on v1 board because it
will result in lost of ART data!
Flash instruction (using U-Boot CLI and tftp server):
1. Configure PC with static IP 192.168.1.10 and tftp server.
2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
3. Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
4. Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
1. Configure PC with static IP 192.168.1.xxx(2-254)/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
3. Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[reworked: image generation code, mach-* files, commit description,
fixed minor code style issues, rebased on master]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-01-05 09:38:05 +00:00
|
|
|
CONFIG_ATH79_MACH_E1700AC_V2=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_E2100L=y
|
ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2
WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334.
Specification:
- 750/400/250 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11)
- 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11)
- 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 1x USB 2.0
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (J5) and LEDs (J13) headers on PCB
WHQX E600G is based on Qualcomm QCA9531.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (with PCIe and USB 2.0 buses)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB
WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887.
Specification:
- 650/391/216 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11)
- 2x 10/100 Mbps Ethernet
- 6x LED (1x RGB, 5 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-12 V)
- UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB
Important notice:
First version of these boards are using different mtd layout, with ART
data at the end. You should not use v2 images on v1 board because it
will result in lost of ART data!
Flash instruction (using U-Boot CLI and tftp server):
1. Configure PC with static IP 192.168.1.10 and tftp server.
2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
3. Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
4. Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
1. Configure PC with static IP 192.168.1.xxx(2-254)/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
3. Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: Peng Zhang <sd20@qxwlan.com>
[reworked: image generation code, mach-* files, commit description,
fixed minor code style issues, rebased on master]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-01-05 09:38:05 +00:00
|
|
|
CONFIG_ATH79_MACH_E600G_V2=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_EAP120=y
|
|
|
|
|
CONFIG_ATH79_MACH_EAP300V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_EAP7660D=y
|
|
|
|
|
CONFIG_ATH79_MACH_EL_M150=y
|
|
|
|
|
CONFIG_ATH79_MACH_EL_MINI=y
|
|
|
|
|
CONFIG_ATH79_MACH_ENS202EXT=y
|
|
|
|
|
CONFIG_ATH79_MACH_EPG5000=y
|
|
|
|
|
CONFIG_ATH79_MACH_ESR1750=y
|
|
|
|
|
CONFIG_ATH79_MACH_ESR900=y
|
2018-01-15 15:45:16 +00:00
|
|
|
CONFIG_ATH79_MACH_EW_BALIN=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_EW_DORIN=y
|
|
|
|
|
CONFIG_ATH79_MACH_F9K1115V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_FRITZ300E=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR150=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR300=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_AR300M=y
|
2017-10-17 21:30:01 +00:00
|
|
|
CONFIG_ATH79_MACH_GL_AR750=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_GL_DOMINO=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_INET=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_MIFI=y
|
|
|
|
|
CONFIG_ATH79_MACH_GL_USB150=y
|
2018-02-15 17:42:45 +00:00
|
|
|
CONFIG_ATH79_MACH_GS_OOLITE_V1=y
|
2018-02-15 22:15:53 +00:00
|
|
|
CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_HIWIFI_HC6361=y
|
|
|
|
|
CONFIG_ATH79_MACH_HORNET_UB=y
|
|
|
|
|
CONFIG_ATH79_MACH_JA76PF=y
|
|
|
|
|
CONFIG_ATH79_MACH_JWAP003=y
|
|
|
|
|
CONFIG_ATH79_MACH_JWAP230=y
|
ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools:
- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel
WiFi Pineapple NANO specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button
LAN Turtle specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)
Packet Squirrel specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch
Flash instructions for all 3 devices:
Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.
Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-13 02:26:33 +00:00
|
|
|
CONFIG_ATH79_MACH_LAN_TURTLE=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_LIMA=y
|
|
|
|
|
CONFIG_ATH79_MACH_MC_MAC1200R=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR12=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR16=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR1750=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR600=y
|
|
|
|
|
CONFIG_ATH79_MACH_MR900=y
|
|
|
|
|
CONFIG_ATH79_MACH_MYNET_N600=y
|
|
|
|
|
CONFIG_ATH79_MACH_MYNET_N750=y
|
|
|
|
|
CONFIG_ATH79_MACH_MYNET_REXT=y
|
|
|
|
|
CONFIG_ATH79_MACH_MZK_W04NU=y
|
|
|
|
|
CONFIG_ATH79_MACH_MZK_W300NH=y
|
ar71xx: add support for ALFA Network N5Q
ALFA Network N5Q is a successor of previous model, the N5 (outdoor
CPE/AP, based on Atheros AR7240 + AR9280). New version is based on
Atheros AR9344.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 5 GHz (AR9344), with ext. PA (RFPA5542) and LNA, up to 27 dBm
- 8x LED (7 are driven by GPIO)
- 1x button (reset)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- header for optional 802.3at/af PoE module
- DC jack for main power input (optional, not installed by default)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmare which is based
on OpenWrt/LEDE. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-01-05 10:35:45 +00:00
|
|
|
CONFIG_ATH79_MACH_N5Q=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_OM2P=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM5P=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM5P_AC=y
|
|
|
|
|
CONFIG_ATH79_MACH_OM5P_ACv2=y
|
|
|
|
|
CONFIG_ATH79_MACH_OMY_G1=y
|
|
|
|
|
CONFIG_ATH79_MACH_OMY_X1=y
|
|
|
|
|
CONFIG_ATH79_MACH_ONION_OMEGA=y
|
|
|
|
|
CONFIG_ATH79_MACH_PB42=y
|
|
|
|
|
CONFIG_ATH79_MACH_PB44=y
|
|
|
|
|
CONFIG_ATH79_MACH_PQI_AIR_PEN=y
|
|
|
|
|
CONFIG_ATH79_MACH_QIHOO_C301=y
|
ar71xx: add support for ALFA Network R36A
ALFA Network R36A is a successor of the previous model, the R36 (Ralink
RT3050F based). New version is based on Qualcomm/Atheros QCA9531 v2.
Specification:
- 650/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R (QCA9531) 2.4 GHz, 2x u.fl connectors on PCB
- 1x USB 2.0 (power controlled by GPIO)
- 6x LED (5 of them are driven by GPIO)
- 2x button (reset, wifi/wps)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- DC jack for main power input (12 V)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-12-28 10:07:54 +00:00
|
|
|
CONFIG_ATH79_MACH_R36A=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_R602N=y
|
2018-02-06 21:08:28 +00:00
|
|
|
CONFIG_ATH79_MACH_RE355=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_RE450=y
|
2016-05-26 11:20:53 +00:00
|
|
|
CONFIG_ATH79_MACH_RME_EG200=y
|
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344.
There are available 3 other models in RUT9xx series: RUT905, RUT950 and
RUT955, which differ in availability of additional I/O ports, built-in
GSM modem type, GPS antenna and other features. FCC ID of the RUT950
model (LTE module built-in): 2AET4-RUT950.
This patch adds support for the RUT900 model only but can be easily
extended to cover whole series. Also, as there are several different
3/4G modules (Huawei, Quectel, Telit) used in whole series, packages
required for WWAN support are not included by default. It is up to the
user to install required software for built-in modem.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA
- built-in 3G module (example: Telit HE910-D)
- 2x miniSIM slot
- 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G)
- PCA9539 16-bit GPIO I2C expander
- 12x LED (4 are driven by AR9344, 7 by PCA9539)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- UART available on PCB edge connector
Serial console pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1".
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-10-15 11:24:02 +00:00
|
|
|
CONFIG_ATH79_MACH_RUT9XX=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_RW2458N=y
|
|
|
|
|
CONFIG_ATH79_MACH_SC1750=y
|
|
|
|
|
CONFIG_ATH79_MACH_SC300M=y
|
|
|
|
|
CONFIG_ATH79_MACH_SC450=y
|
|
|
|
|
CONFIG_ATH79_MACH_SMART_300=y
|
|
|
|
|
CONFIG_ATH79_MACH_SOM9331=y
|
|
|
|
|
CONFIG_ATH79_MACH_SR3200=y
|
2018-02-16 19:30:38 +00:00
|
|
|
CONFIG_ATH79_MACH_T830=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y
|
|
|
|
|
CONFIG_ATH79_MACH_TEW_673GRU=y
|
|
|
|
|
CONFIG_ATH79_MACH_TEW_732BR=y
|
|
|
|
|
CONFIG_ATH79_MACH_TEW_823DRU=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_MR3X20=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_MR6400=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WDR3500=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WDR4300=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WDR6500_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WPA8630=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043ND=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR1043N_V5=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR2543N=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR703N=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR720N_V3=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR810N=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR810N_V2=y
|
2018-01-31 20:18:16 +00:00
|
|
|
CONFIG_ATH79_MACH_TL_WR841N_V8=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_TL_WR841N_V9=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR902AC_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_TL_WR942N_V1=y
|
|
|
|
|
CONFIG_ATH79_MACH_TUBE2H=y
|
|
|
|
|
CONFIG_ATH79_MACH_UBNT=y
|
|
|
|
|
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
|
|
|
|
|
CONFIG_ATH79_MACH_UBNT_XM=y
|
ar71xx: add support for Samsung WAM250
Samsung WAM250 is a dual-band (selectable, not simultaneous) wireless
hub, dedicated for Samsung Shape Wireless Audio System. The device is
based on Atheros AR9344. FCC ID: A3LWAM250.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet
- 2T2R 2.4/5 GHz (AR9344), with ext. PA (SE2598L, SE5003L) and LNA
- 1x USB 2.0
- 4x LED (all are driven by GPIO)
- 2x button (reset, wps/speaker add)
- DC jack for main power input (14 V)
- UART header on PCB (J4, RX: 3, TX: 5)
Flash instruction:
This device uses dual-image (switched between upgrades) with a common
jffs2 config partition. Fortunately, there is a way to disable this mode
so that more flash space can be used by OpenWrt image.
You can easily access this device over telnet, using root/root
credentials (the same also work for serial console access).
1. Make sure that your device uses second (bootpart=2) image using
command: "fw_printenv bootpart".
2. If your device uses first image (bootpart=1), perform upgrade to the
latest vendor firmware (after the update, device should boot from
second partition) using web gui (default login: admin/1234567890).
3. Rename "sysupgrade" image to "firmware.bin", download it (you can use
wget, tftp or ftpget) to "/tmp" and issue below commands:
mtd_debug erase /dev/mtd3 0 $(wc -c /tmp/firmware.bin | awk -F' ' '{print $1}')
mtd_debug write /dev/mtd3 0 $(wc -c /tmp/firmware.bin)
fw_setenv bootpart
fw_setenv bootcmd "bootm 0x9f070000"
reboot
Revert to vendor firmware instruction:
1. Download vendor firmware to "/tmp" device and issue below commands:
fw_setenv bootpart 1
sysupgrade -n -F SS_BHUB_v2.2.05.bin
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-08 21:28:07 +00:00
|
|
|
CONFIG_ATH79_MACH_WAM250=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_WEIO=y
|
|
|
|
|
CONFIG_ATH79_MACH_WHR_HP_G300N=y
|
ar71xx: add support for AR9331 based Hak5 devices
This adds support for AR9331 based Hak5 penetration testing tools:
- WiFi Pineapple NANO
- LAN Turtle
- Packet Squirrel
WiFi Pineapple NANO specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus)
- Ethernet: 1x FE over USB (ASIX AX88772A)
- Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD
- Power: USB 5 V, 1.5 A
- Other: status LED, reset button
LAN Turtle specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B)
- Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot
- Power: USB 5 V, 0.5 A
- Other: status LED, reset button (inside, on PCB)
Packet Squirrel specifications:
- SoC: Atheros AR9331 (400 MHz)
- RAM: 64 MB (DDR2)
- FLASH: 16 MB
- WiFi: none
- Ethernet: 2x FE (AR9331)
- Ports: 2x RJ45, 1x USB 2.0
- Power: USB 5 V, 0.12 A
- Other: status LED, reset button, 4-way switch
Flash instructions for all 3 devices:
Original firmware is based on OpenWrt.
Use sysupgrade via SSH to flash.
Signed-off-by: Sebastian Kinne <contact@sebkinne.com>
[squashed commits, combined and reworked mach files, aligned board
naming with general convention, fixed minor issues, tested on real
hardware, reworded commit subject and description]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-13 02:26:33 +00:00
|
|
|
CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO=y
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_ATH79_MACH_WLAE_AG300N=y
|
|
|
|
|
CONFIG_ATH79_MACH_WLR8100=y
|
|
|
|
|
CONFIG_ATH79_MACH_WNDAP360=y
|
|
|
|
|
CONFIG_ATH79_MACH_WNDR3700=y
|
|
|
|
|
CONFIG_ATH79_MACH_WNR2200=y
|
|
|
|
|
CONFIG_ATH79_MACH_WP543=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPE72=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ342=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ344=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ531=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ558=y
|
|
|
|
|
CONFIG_ATH79_MACH_WPJ563=y
|
|
|
|
|
CONFIG_ATH79_MACH_WRT160NL=y
|
|
|
|
|
CONFIG_ATH79_MACH_WRT400N=y
|
|
|
|
|
CONFIG_ATH79_MACH_WRTNODE2Q=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_450HP2=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_AG300H=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
|
|
|
|
|
CONFIG_ATH79_MACH_WZR_HP_G450H=y
|
|
|
|
|
CONFIG_ATH79_MACH_XD3200=y
|
|
|
|
|
CONFIG_ATH79_MACH_ZBT_WE1526=y
|
|
|
|
|
CONFIG_ATH79_MACH_ZCN_1523H=y
|
|
|
|
|
CONFIG_ATH79_NVRAM=y
|
|
|
|
|
CONFIG_ATH79_PCI_ATH9K_FIXUP=y
|
|
|
|
|
CONFIG_BLK_MQ_PCI=y
|
ar71xx: add support for Teltonika RUT900
Teltonika RUT900 is an industrial 3G router based on Atheros AR9344.
There are available 3 other models in RUT9xx series: RUT905, RUT950 and
RUT955, which differ in availability of additional I/O ports, built-in
GSM modem type, GPS antenna and other features. FCC ID of the RUT950
model (LTE module built-in): 2AET4-RUT950.
This patch adds support for the RUT900 model only but can be easily
extended to cover whole series. Also, as there are several different
3/4G modules (Huawei, Quectel, Telit) used in whole series, packages
required for WWAN support are not included by default. It is up to the
user to install required software for built-in modem.
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA
- built-in 3G module (example: Telit HE910-D)
- 2x miniSIM slot
- 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G)
- PCA9539 16-bit GPIO I2C expander
- 12x LED (4 are driven by AR9344, 7 by PCA9539)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- UART available on PCB edge connector
Serial console pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1".
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-10-15 11:24:02 +00:00
|
|
|
CONFIG_GPIO_PCA953X=y
|
|
|
|
|
# CONFIG_GPIO_PCA953X_IRQ is not set
|
2018-01-12 05:19:29 +00:00
|
|
|
CONFIG_HW_HAS_PCI=y
|
|
|
|
|
# CONFIG_LEDS_WNDR3700_USB is not set
|
|
|
|
|
CONFIG_MYLOADER=y
|
|
|
|
|
CONFIG_PCI=y
|
|
|
|
|
CONFIG_PCI_AR724X=y
|
|
|
|
|
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
|
|
|
|
|
CONFIG_PCI_DOMAINS=y
|
|
|
|
|
CONFIG_SERIAL_AR933X=y
|
|
|
|
|
CONFIG_SERIAL_AR933X_CONSOLE=y
|
|
|
|
|
CONFIG_SERIAL_AR933X_NR_UARTS=2
|
|
|
|
|
CONFIG_SOC_AR71XX=y
|
|
|
|
|
CONFIG_SOC_AR724X=y
|
|
|
|
|
CONFIG_SOC_AR913X=y
|
|
|
|
|
CONFIG_SOC_AR933X=y
|
|
|
|
|
CONFIG_SOC_AR934X=y
|
|
|
|
|
CONFIG_SOC_QCA953X=y
|
|
|
|
|
CONFIG_SOC_QCA955X=y
|
|
|
|
|
CONFIG_SOC_QCA956X=y
|