KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

ar71xx:add support for COMFAST CF-E375AC

Browse source 
COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on
Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337.

Short specification:

    2x 10/100/1000 Mbps Ethernet, with PoE support
    128MB of RAM (DDR2)
    16 MB of FLASH
    3T3R 2.4 GHz, 802.11b/g/n
    2T2R 5 GHz, 802.11ac/n/a, wave 2
    built-in 5x 3 dBi antennas
    output power (max): 500 mW (27 dBm)
    1x RGB LED, 1x button
    built-in watchdog chipset

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Ding Tengfei <dtf@comfast.cn>
This commit is contained in:
Ding Tengfei 2018-02-07 11:47:52 +08:00 committed by John Crispin
parent f17173f5a3
commit bf66bb8c96
11 changed files with 139 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
target/linux/ar71xx/base-files/etc/board.d/01_leds
View file

@ -208,6 +208,11 @@ cf-e320n-v2)
ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
;;
cf-e375ac)
ucidef_set_led_switch "wan" "WAN" "comfast:red:wan" "switch0" "0x02"
ucidef_set_led_switch "lan" "LAN" "comfast:green:lan" "switch0" "0x04"
ucidef_set_led_wlan "wlan1" "WLAN" "comfast:blue:wlan" "phy1tpt"
;;
cf-e355ac|\
cf-e380ac-v1|\
cf-e380ac-v2)

1
target/linux/ar71xx/base-files/etc/board.d/02_network
View file

@ -434,6 +434,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch1" \
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
;;
cf-e375ac |\
rb-map-2nd)
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan"

3
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View file

@ -151,7 +151,8 @@ case "$FIRMWARE" in
case $board in
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
archer-c60-v1|\
cf-e375ac)
ath10kcal_extract "art" 20480 12064
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
View file

@ -519,6 +519,9 @@ ar71xx_board_detect() {
*"CF-E355AC")
name="cf-e355ac"
;;
*"CF-E375AC")
name="cf-e375ac"
;;
*"CF-E380AC v1")
name="cf-e380ac-v1"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
View file

@ -209,6 +209,7 @@ platform_check_image() {
cf-e316n-v2|\
cf-e320n-v2|\
cf-e355ac|\
cf-e375ac|\
cf-e380ac-v1|\
cf-e380ac-v2|\
cf-e520n|\

11
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
View file

@ -2141,6 +2141,17 @@ config ATH79_MACH_CF_E355AC
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E375AC
bool "COMFAST CF-E375AC support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
config ATH79_MACH_CF_E380AC_V1
bool "COMFAST CF-E380AC v1 support"
select SOC_QCA955X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
View file

@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E355AC) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E375AC) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E380AC_V1) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o

104
target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
View file

@ -3,6 +3,7 @@
* - CF-E316N v2 (AR9341)
* - CF-E320N v2 (QCA9531)
* - CF-E355AC (QCA9531)
* - CF-E375AC (QCA9563 + QCA9886 + QCA8337)
* - CF-E380AC v1/v2 (QCA9558)
* - CF-E520N/CF-E530N (QCA9531)
*
@ -16,6 +17,7 @@
*/
#include <linux/gpio.h>
#include <linux/ar8216_platform.h>
#include <linux/platform_data/phy-at803x.h>
#include <linux/platform_device.h>
#include <linux/timer.h>
@ -167,6 +169,65 @@ static struct gpio_keys_button cf_e355ac_gpio_keys[] __initdata = {
},
};
#define CF_E375AC_GPIO_XWDT_TRIGGER 6
#define CF_E375AC_GPIO_BTN_RESET_WPS 2
#define CF_E375AC_GPIO_LED_WAN 15
#define CF_E375AC_GPIO_LED_LAN 17
#define CF_E375AC_GPIO_LED_WLAN 16
static struct gpio_led cf_e375ac_leds_gpio[] __initdata = {
{
.name = "comfast:red:wan",
.gpio = CF_E375AC_GPIO_LED_WAN,
.active_low = 0,
}, {
.name = "comfast:green:lan",
.gpio = CF_E375AC_GPIO_LED_LAN,
.active_low = 0,
}, {
.name = "comfast:blue:wlan",
.gpio = CF_E375AC_GPIO_LED_WLAN,
.active_low = 0,
},
};
static struct gpio_keys_button cf_e375ac_gpio_keys[] __initdata = {
{
.desc = "Reset button/WPS button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
.gpio = CF_E375AC_GPIO_BTN_RESET_WPS,
.active_low = 1,
},
};
static struct ar8327_pad_cfg cf_e375ac_ar8337_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
static struct ar8327_platform_data cf_e375ac_ar8337_data = {
.pad0_cfg = &cf_e375ac_ar8337_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info cf_e375ac_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &cf_e375ac_ar8337_data,
},
};
/* CF-E380AC v1/v2 */
#define CF_E380AC_V1V2_GPIO_LED_LAN 0
#define CF_E380AC_V1V2_GPIO_LED_WLAN2G 2
@ -420,6 +481,49 @@ static void __init cf_e355ac_setup(void)
MIPS_MACHINE(ATH79_MACH_CF_E355AC, "CF-E355AC", "COMFAST CF-E355AC",
cf_e355ac_setup);
static void __init cf_e375ac_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f040000);
u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
u8 wlan1_mac[ETH_ALEN];
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
ath79_init_mac(wlan1_mac, art, 3);
/* Disable JTAG, enabling GPIOs 0-3 */
/* Configure OBS4 line, for GPIO 4*/
ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, 0);
cf_exxxn_common_setup(0x40000, CF_E375AC_GPIO_XWDT_TRIGGER);
ath79_gpio_output_select(CF_E375AC_GPIO_LED_WAN, 0);
ath79_gpio_output_select(CF_E375AC_GPIO_LED_LAN, 0);
ath79_gpio_output_select(CF_E375AC_GPIO_LED_WLAN, 0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e375ac_leds_gpio),
cf_e375ac_leds_gpio);
ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
ARRAY_SIZE(cf_e375ac_gpio_keys),
cf_e375ac_gpio_keys);
platform_device_register(&ath79_mdio0_device);
mdiobus_register_board_info(cf_e375ac_mdio0_info,
ARRAY_SIZE(cf_e375ac_mdio0_info));
/* GMAC0 is connected to an AR8337 switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_register_eth(0);
ap91_pci_init(art + 0x5000, wlan1_mac);
}
MIPS_MACHINE(ATH79_MACH_CF_E375AC, "CF-E375AC", "COMFAST CF-E375AC", cf_e375ac_setup);
static void __init cf_e380ac_v1v2_common_setup(unsigned long art_ofs)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f000000 + art_ofs);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
View file

@ -64,6 +64,7 @@ enum ath79_mach_type {
ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
ATH79_MACH_CF_E355AC, /* COMFAST CF-E355AC */
ATH79_MACH_CF_E375AC, /* COMFAST CF-E375AC */
ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC v1 */
ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */
ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */

1
target/linux/ar71xx/generic/config-default
View file

@ -44,6 +44,7 @@ CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CF_E320N_V2=y
CONFIG_ATH79_MACH_CF_E355AC=y
CONFIG_ATH79_MACH_CF_E375AC=y
CONFIG_ATH79_MACH_CF_E380AC_V1=y
CONFIG_ATH79_MACH_CF_E380AC_V2=y
CONFIG_ATH79_MACH_CF_E520N=y

9
target/linux/ar71xx/image/generic.mk
View file

@ -203,6 +203,15 @@ define Device/cf-e355ac
endef
TARGET_DEVICES += cf-e355ac
define Device/cf-e375ac
DEVICE_TITLE := COMFAST CF-E375AC
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca9888
BOARDNAME := CF-E375AC
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e375ac
define Device/cf-e380ac-v1
DEVICE_TITLE := COMFAST CF-E380AC v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x