openwrtv4/target/linux/lantiq/xway/config-4.9

CONFIG_ADM6996_PHY=y
CONFIG_AR8216_PHY=y
CONFIG_BLK_MQ_PCI=y
CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_ISDN is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_XWAY=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_NLS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_PCI=y
# CONFIG_PCIE_LANTIQ is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062 2012-11-02 20:07:36 +00:00			`CONFIG_ADM6996_PHY=y`
			`CONFIG_AR8216_PHY=y`
lantiq: select PCI support in subtargets AmazonSE and Falcon do not have support for PCI and it can't be unselected in the subtarget kernel config. This way the enabled PCI support is inherit from the higher level config to the subtarget. If CONFIG_PCI is selected, PCI_SUPPORT will be autoselected as well and all packages depending on this config symbol will be build and at least some of them fail due to missing pci functions. The issue can be observed if all kmods and all non-shared packages are build. Fix the issue by enabling PCI support only in subtargets with PCI support. Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-10-03 12:58:53 +00:00			`CONFIG_BLK_MQ_PCI=y`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`CONFIG_CRC16=y`
			`CONFIG_CRYPTO_DEFLATE=y`
			`CONFIG_CRYPTO_LZO=y`
add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062 2012-11-02 20:07:36 +00:00			`CONFIG_FIRMWARE_IN_KERNEL=y`
			`CONFIG_INPUT=y`
			`CONFIG_INPUT_EVDEV=y`
			`CONFIG_INPUT_POLLDEV=y`
			`# CONFIG_ISDN is not set`
add linux-v3.7 SVN-Revision: 34687 2012-12-15 01:59:45 +00:00			`CONFIG_LEDS_TRIGGER_HEARTBEAT=y`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`CONFIG_LZO_COMPRESS=y`
			`CONFIG_LZO_DECOMPRESS=y`
lantiq: BT Home Hub 2B support - board support Board support patch for BT Home Hub 2B Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40370 2014-04-03 14:26:54 +00:00			`CONFIG_MTD_NAND=y`
			`CONFIG_MTD_NAND_ECC=y`
			`CONFIG_MTD_NAND_PLATFORM=y`
			`CONFIG_MTD_NAND_XWAY=y`
add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062 2012-11-02 20:07:36 +00:00			`# CONFIG_MTD_PHYSMAP_OF is not set`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`CONFIG_MTD_UBI=y`
			`CONFIG_MTD_UBI_BEB_LIMIT=20`
lantiq xway: disable gluebi and enable ubiblock Disables gluebi and enables ubiblock on lantiq xway. Squashfs images on nand use ubifs instead of jffs2 for the overlay. I'll leave the equivalent patch for xrx200 to someone who has a board to test. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41565 2014-07-10 19:16:35 +00:00			`CONFIG_MTD_UBI_BLOCK=y`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`# CONFIG_MTD_UBI_FASTMAP is not set`
lantiq xway: disable gluebi and enable ubiblock Disables gluebi and enables ubiblock on lantiq xway. Squashfs images on nand use ubifs instead of jffs2 for the overlay. I'll leave the equivalent patch for xrx200 to someone who has a board to test. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41565 2014-07-10 19:16:35 +00:00			`# CONFIG_MTD_UBI_GLUEBI is not set`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`CONFIG_MTD_UBI_WL_THRESHOLD=4096`
add linux-v3.7 SVN-Revision: 34687 2012-12-15 01:59:45 +00:00			`CONFIG_NLS=y`
lantiq: select PCI support in subtargets AmazonSE and Falcon do not have support for PCI and it can't be unselected in the subtarget kernel config. This way the enabled PCI support is inherit from the higher level config to the subtarget. If CONFIG_PCI is selected, PCI_SUPPORT will be autoselected as well and all packages depending on this config symbol will be build and at least some of them fail due to missing pci functions. The issue can be observed if all kmods and all non-shared packages are build. Fix the issue by enabling PCI support only in subtargets with PCI support. Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-10-03 12:58:53 +00:00			`CONFIG_OF_ADDRESS_PCI=y`
			`CONFIG_OF_PCI=y`
			`CONFIG_OF_PCI_IRQ=y`
			`CONFIG_PCI=y`
			`# CONFIG_PCIE_LANTIQ is not set`
			`CONFIG_PCI_DOMAINS=y`
			`CONFIG_PCI_LANTIQ=y`
add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062 2012-11-02 20:07:36 +00:00			`CONFIG_RTL8306_PHY=y`
add linux-v3.7 SVN-Revision: 34687 2012-12-15 01:59:45 +00:00			`CONFIG_RTL8366S_PHY=y`
			`CONFIG_RTL8367B_PHY=y`
			`CONFIG_RTL8367_PHY=y`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`CONFIG_UBIFS_FS=y`
			`CONFIG_UBIFS_FS_ADVANCED_COMPR=y`
			`CONFIG_UBIFS_FS_LZO=y`
			`CONFIG_UBIFS_FS_ZLIB=y`
add linux-v3.7 SVN-Revision: 34687 2012-12-15 01:59:45 +00:00			`CONFIG_USB=y`
			`CONFIG_USB_COMMON=y`
			`# CONFIG_USB_EHCI_HCD is not set`
add subtarget, as of 3.6 we dont seperate xway SoC SVN-Revision: 34062 2012-11-02 20:07:36 +00:00			`CONFIG_USB_SUPPORT=y`
add linux-v3.7 SVN-Revision: 34687 2012-12-15 01:59:45 +00:00			`# CONFIG_USB_UHCI_HCD is not set`
lantiq: BT Home Hub 2B - overlayfs on top of ubi BT Home Hub 2B: use overlayfs on top of ubi. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 40553 2014-04-22 08:08:46 +00:00			`CONFIG_ZLIB_DEFLATE=y`
			`CONFIG_ZLIB_INFLATE=y`