5b089e45a6
Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
184 lines
4.7 KiB
Diff
184 lines
4.7 KiB
Diff
--- a/drivers/hwmon/Makefile
|
|
+++ b/drivers/hwmon/Makefile
|
|
@@ -107,6 +107,7 @@ obj-$(CONFIG_SENSORS_LTC4222) += ltc4222
|
|
obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o
|
|
obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o
|
|
obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o
|
|
+obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
|
|
obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
|
|
obj-$(CONFIG_SENSORS_MAX16065) += max16065.o
|
|
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
|
|
--- a/drivers/hwmon/Kconfig
|
|
+++ b/drivers/hwmon/Kconfig
|
|
@@ -753,6 +753,14 @@ config SENSORS_LTC4261
|
|
This driver can also be built as a module. If so, the module will
|
|
be called ltc4261.
|
|
|
|
+config SENSORS_LTQ_CPUTEMP
|
|
+ bool "Lantiq CPU temperature sensor"
|
|
+ depends on LANTIQ
|
|
+ default n
|
|
+ help
|
|
+ If you say yes here you get support for the temperature
|
|
+ sensor inside your CPU.
|
|
+
|
|
config SENSORS_MAX1111
|
|
tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
|
|
depends on SPI_MASTER
|
|
--- /dev/null
|
|
+++ b/drivers/hwmon/ltq-cputemp.c
|
|
@@ -0,0 +1,154 @@
|
|
+/* Lantiq CPU Temperatur sensor driver for xrx200
|
|
+ *
|
|
+ * Copyright (C) 2016 Florian Eckert <feckert@tdt.de>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
+ * (at your option) any later version
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, see <http://www.gnu.org/licenses/>
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/of_device.h>
|
|
+#include <linux/hwmon.h>
|
|
+#include <linux/hwmon-sysfs.h>
|
|
+
|
|
+#include <lantiq_soc.h>
|
|
+
|
|
+/* gphy1 configuration register contains cpu temperature */
|
|
+#define CGU_GPHY1_CR 0x0040
|
|
+#define CGU_TEMP_PD BIT(19)
|
|
+
|
|
+static void ltq_cputemp_enable(void)
|
|
+{
|
|
+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
|
|
+
|
|
+ /* wait a short moment to let the SoC get the first temperatur value */
|
|
+ mdelay(100);
|
|
+}
|
|
+
|
|
+static void ltq_cputemp_disable(void)
|
|
+{
|
|
+ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR);
|
|
+}
|
|
+
|
|
+static int ltq_cputemp_read(void)
|
|
+{
|
|
+ int value;
|
|
+
|
|
+ /* get the temperature including one decimal place */
|
|
+ value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF;
|
|
+ value = (value << 2 ) + value;
|
|
+
|
|
+ /* range -38 to +154 °C, register value zero is -38.0 °C */
|
|
+ value -= 380;
|
|
+
|
|
+ return value;
|
|
+}
|
|
+
|
|
+static ssize_t show_cputemp(struct device *dev,
|
|
+ struct device_attribute *attr, char *buf)
|
|
+{
|
|
+ int value;
|
|
+
|
|
+ value = ltq_cputemp_read();
|
|
+ /* scale temp to millidegree */
|
|
+ value = value * 100;
|
|
+
|
|
+ return sprintf(buf, "%d\n", value);
|
|
+}
|
|
+
|
|
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL);
|
|
+
|
|
+static struct attribute *ltq_cputemp_attrs[] = {
|
|
+ &dev_attr_temp1_input.attr,
|
|
+ NULL
|
|
+};
|
|
+
|
|
+ATTRIBUTE_GROUPS(ltq_cputemp);
|
|
+
|
|
+static int ltq_cputemp_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int value = 0;
|
|
+ int ret;
|
|
+ struct device *hwmon_dev;
|
|
+
|
|
+ /* available on vr9 v1.2 SoCs only */
|
|
+ if (ltq_soc_type() != SOC_TYPE_VR9_2)
|
|
+ return -ENODEV;
|
|
+
|
|
+ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
|
|
+ "CPU0",
|
|
+ NULL,
|
|
+ ltq_cputemp_groups);
|
|
+
|
|
+ if (IS_ERR(hwmon_dev)) {
|
|
+ dev_err(&pdev->dev, "Failed to register as hwmon device");
|
|
+ ret = PTR_ERR(hwmon_dev);
|
|
+ goto error_hwmon;
|
|
+ }
|
|
+
|
|
+ ltq_cputemp_enable();
|
|
+ value = ltq_cputemp_read();
|
|
+ dev_info(&pdev->dev, "Current CPU die temperature: %d.%d °C", value / 10, value % 10);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+error_hwmon:
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int ltq_cputemp_release(struct platform_device *pdev)
|
|
+{
|
|
+ hwmon_device_unregister(&pdev->dev);
|
|
+ ltq_cputemp_disable();
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+const struct of_device_id ltq_cputemp_match[] = {
|
|
+ { .compatible = "lantiq,cputemp" },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, ltq_cputemp_match);
|
|
+
|
|
+static struct platform_driver ltq_cputemp_driver = {
|
|
+ .probe = ltq_cputemp_probe,
|
|
+ .remove = ltq_cputemp_release,
|
|
+ .driver = {
|
|
+ .name = "ltq-cputemp",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = ltq_cputemp_match,
|
|
+ },
|
|
+};
|
|
+
|
|
+int __init init_ltq_cputemp(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = platform_driver_register(<q_cputemp_driver);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+void clean_ltq_cputemp(void)
|
|
+{
|
|
+ platform_driver_unregister(<q_cputemp_driver);
|
|
+ return;
|
|
+}
|
|
+
|
|
+module_init(init_ltq_cputemp);
|
|
+module_exit(clean_ltq_cputemp);
|
|
+
|
|
+MODULE_AUTHOR("Florian Eckert <feckert@tdt.de>");
|
|
+
|
|
+MODULE_DESCRIPTION("Lantiq Temperature Sensor");
|
|
+MODULE_LICENSE("GPL");
|