openwrtv3/target/linux/lantiq
Martin Blumenstingl 70395ae8cb lantiq: fix patching the wifi mac address on BTHOMEHUBV3A
The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.

The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device

Fixes: a20616863d ("lantiq: use ath9k device tree bindings
binding/owl-loader")

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2017-02-13 07:57:15 +01:00
..
base-files lantiq: fix patching the wifi mac address on BTHOMEHUBV3A 2017-02-13 07:57:15 +01:00
dts lantiq: add support for kernel 4.9 2017-02-11 23:44:13 +01:00
falcon build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
files/firmware/lantiq move GPHY FW blobs to non versioned folder 2013-03-14 18:42:21 +00:00
image lantiq: fix brnImage signature for the VGV7510KW22BRN images 2017-01-28 12:44:41 +01:00
patches-4.4 lantiq: fix section mismatch in PCIe driver 2017-02-12 01:29:41 +01:00
patches-4.9 lantiq: fix section mismatch in PCIe driver 2017-02-12 01:29:41 +01:00
xrx200 lantiq: add support for kernel 4.9 2017-02-11 23:44:13 +01:00
xway build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
xway_legacy build: remove mips16 feature flag from target makefiles 2017-01-24 13:15:01 +01:00
config-4.4 lantiq: add cpu temperatur sensor driver for xrx200 2016-08-03 15:30:13 +02:00
config-4.9 lantiq: add support for kernel 4.9 2017-02-11 23:44:13 +01:00
Makefile lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway 2017-01-24 13:33:45 +01:00
modules.mk fix i2c-lantiq module 2012-12-16 10:03:18 +00:00