openwrtv3/target/linux/lantiq/patches-4.4/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
Felix Fietkau f577cb25c0 lantiq: Add support for linux 4.4
The following patches were dropped because they are already applied
upstream:
- 0038-MIPS-lantiq-fpi-on-ar9.patch
- 0039-MIPS-lantiq-initialize-usb-on-boot.patch
- 0042-USB-DWC2-big-endian-support.patch
- 0043-gpio-stp-xway-fix-phy-mask.patch

All other patches were simply refreshed, except the following:
- 0001-MIPS-lantiq-add-pcie-driver.patch
  Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled
  some PMU gates for the vrx200 / VR9 SoCs) were removed since the
  upstream kernel disables unused PMU gates automatically (since
  95135bfa7ead1becc2879230f72583dde2b71a0c
  "MIPS: Lantiq: Deactivate most of the devices by default").
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
  Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers
  should use of_get_mac_address(). of_get_mac_address_mtd is not
  available for drivers anymore since it's called automatically within
  of_get_mac_address().
- 0028-NET-lantiq-various-etop-fixes.patch
  Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch

While refreshing the kernel configuration SPI support had to be moved to
config-4.4 because otherwise M25P80 was disabled.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48307
2016-01-18 11:40:19 +00:00

44 lines
1.4 KiB
Diff

From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 18:06:39 +0200
Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be
persistent
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/mtd/nand/xway_nand.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -54,6 +54,8 @@
#define NAND_CON_CSMUX (1 << 1)
#define NAND_CON_NANDM 1
+static u32 xway_latchcmd;
+
static void xway_reset_chip(struct nand_chip *chip)
{
unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf
unsigned long flags;
if (ctrl & NAND_CTRL_CHANGE) {
- nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
if (ctrl & NAND_CLE)
- nandaddr |= NAND_WRITE_CMD;
- else
- nandaddr |= NAND_WRITE_ADDR;
- this->IO_ADDR_W = (void __iomem *) nandaddr;
+ xway_latchcmd = NAND_WRITE_CMD;
+ else if (ctrl & NAND_ALE)
+ xway_latchcmd = NAND_WRITE_ADDR;
}
if (cmd != NAND_CMD_NONE) {
spin_lock_irqsave(&ebu_lock, flags);
- writeb(cmd, this->IO_ADDR_W);
+ writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd));
while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
;
spin_unlock_irqrestore(&ebu_lock, flags);