ae79c41286
This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
61 lines
2.2 KiB
Bash
Executable file
61 lines
2.2 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/ipq806x.sh
|
|
|
|
board_config_update
|
|
|
|
board=$(ipq806x_board_name)
|
|
|
|
case "$board" in
|
|
c2600)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb_2" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb_4" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
|
|
ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
|
|
ucidef_set_led_default "general" "general" "${board}:white:ledgnr" "1"
|
|
;;
|
|
d7800 |\
|
|
r7500 |\
|
|
r7500v2)
|
|
ucidef_set_led_usbdev "usb1" "USB 1" "${board}:white:usb1" "1-1"
|
|
ucidef_set_led_usbdev "usb2" "USB 2" "${board}:white:usb3" "3-1"
|
|
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
|
|
ucidef_set_led_ide "esata" "eSATA" "${board}:amber:esata"
|
|
ucidef_set_led_default "wps" "WPS" "${board}:white:wps" "0"
|
|
ucidef_set_led_default "rfkill" "rfkill" "${board}:white:rfkill" "0"
|
|
;;
|
|
r7800)
|
|
ucidef_set_led_usbport "usb1" "USB 1" "${board}:white:usb1" "usb1-port1" "usb2-port1"
|
|
ucidef_set_led_usbport "usb2" "USB 2" "${board}:white:usb2" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_netdev "wan" "WAN" "${board}:white:wan" "eth0"
|
|
ucidef_set_led_ide "esata" "eSATA" "${board}:white:esata"
|
|
ucidef_set_led_wlan "wps" "WPS" "${board}:white:wps" "phy0tpt"
|
|
ucidef_set_led_wlan "rfkill" "rfkill" "${board}:white:rfkill" "phy1tpt"
|
|
;;
|
|
ea8500)
|
|
ucidef_set_led_wlan "wifi" "WIFI" "ea8500:green:wifi" "phy0radio"
|
|
ucidef_set_led_default "wps" "WPS" "ea8500:green:wps" "0"
|
|
;;
|
|
nbg6817)
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2g" "$board:amber:wifi" "phy1radio"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:amber:wifi5" "phy0radio"
|
|
ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1"
|
|
;;
|
|
vr2600v)
|
|
ucidef_set_led_usbport "usb" "USB" "${board}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
|
|
ucidef_set_led_switch "lan" "lan" "${board}:white:lan" "switch0" "0x1e"
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${board}:white:wlan2g" "phy0radio"
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${board}:white:wlan5g" "phy1radio"
|
|
ucidef_set_led_switch "wan" "wan" "${board}:white:wan" "switch0" "0x20"
|
|
;;
|
|
*)
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|