558d86923e
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.
The device is based on Qualcomm/Atheros AR9341 v1.
Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button
Flash instructions:
You have three options:
- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.
- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.
- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:
*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
stat -- Status
sys -- System
wless2 -- 2.4G-Wireless
mgmt -- Management
tree -- Tree
help -- Help
reboot -- Reboot
ens202ext>mgmt
Management
---========= Commands Help =========---
admin -- Administration
mvlan -- Management VLAN settings
snmp -- SNMP settings
backup -- Backup/Restore settings
autorb -- Auto reboot settings
fwgrade -- Firmware upgrade
time -- Time settings
wifisch -- Wifi schedule
log -- Log
diag -- Diagnostics
disc -- Device Discovery
logout -- Logout
help -- Help
exit -- Exit
ens202ext/mgmt>fwgrade
Management --> Firmware upgrade
---========= Commands Help =========---
fwup -- Firmware upgrade
help -- Help
exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin
Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
26 lines
875 B
Makefile
26 lines
875 B
Makefile
define Build/senao-factory-image
|
|
$(eval board=$(word 1,$(1)))
|
|
$(eval rootfs=$(word 2,$(1)))
|
|
|
|
mkdir -p $@.senao
|
|
|
|
touch $@.senao/FWINFO-OpenWrt-$(REVISION)-$(board)
|
|
$(CP) $(IMAGE_KERNEL) $@.senao/openwrt-senao-$(board)-uImage-lzma.bin
|
|
$(CP) $(rootfs) $@.senao/openwrt-senao-$(board)-root.squashfs
|
|
|
|
$(TAR) -czf $@ -C $@.senao .
|
|
rm -rf $@.senao
|
|
endef
|
|
|
|
define Device/ens202ext
|
|
DEVICE_TITLE := EnGenius ENS202EXT
|
|
BOARDNAME := ENS202EXT
|
|
DEVICE_PACKAGES += rssileds
|
|
KERNEL_SIZE := 1536k
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | check-size $$(KERNEL_SIZE)
|
|
IMAGE_SIZE := 12096k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin/squashfs := append-rootfs | pad-rootfs | senao-factory-image ens202ext $$$$@
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,13632k(firmware),2048k(failsafe)ro,64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += ens202ext
|