558d86923e
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.
The device is based on Qualcomm/Atheros AR9341 v1.
Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button
Flash instructions:
You have three options:
- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.
- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.
- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:
*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
stat -- Status
sys -- System
wless2 -- 2.4G-Wireless
mgmt -- Management
tree -- Tree
help -- Help
reboot -- Reboot
ens202ext>mgmt
Management
---========= Commands Help =========---
admin -- Administration
mvlan -- Management VLAN settings
snmp -- SNMP settings
backup -- Backup/Restore settings
autorb -- Auto reboot settings
fwgrade -- Firmware upgrade
time -- Time settings
wifisch -- Wifi schedule
log -- Log
diag -- Diagnostics
disc -- Device Discovery
logout -- Logout
help -- Help
exit -- Exit
ens202ext/mgmt>fwgrade
Management --> Firmware upgrade
---========= Commands Help =========---
fwup -- Firmware upgrade
help -- Help
exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin
Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
114 lines
3 KiB
Makefile
114 lines
3 KiB
Makefile
#
|
|
# Copyright (C) 2008-2011 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
KERNEL_LOADADDR = 0x80060000
|
|
|
|
DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE
|
|
|
|
ifeq ($(SUBTARGET),generic)
|
|
include ./tp-link.mk
|
|
include ./ubnt.mk
|
|
include ./generic.mk
|
|
include ./legacy-devices.mk
|
|
include ./senao.mk
|
|
endif
|
|
ifeq ($(SUBTARGET),nand)
|
|
include ./nand.mk
|
|
endif
|
|
ifeq ($(SUBTARGET),mikrotik)
|
|
include ./mikrotik.mk
|
|
endif
|
|
include ./legacy.mk
|
|
|
|
define Build/netgear-squashfs
|
|
rm -rf $@.fs $@.squashfs
|
|
mkdir -p $@.fs/image
|
|
cp $@ $@.fs/image/uImage
|
|
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
|
|
$@.fs $@.squashfs \
|
|
-noappend -root-owned -be -b 65536 \
|
|
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
|
|
|
|
dd if=/dev/zero bs=1k count=1 >> $@.squashfs
|
|
mkimage \
|
|
-A mips -O linux -T filesystem -C none \
|
|
-M $(NETGEAR_KERNEL_MAGIC) \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $@.squashfs $@
|
|
rm -rf $@.squashfs $@.fs
|
|
endef
|
|
|
|
define Build/netgear-uImage
|
|
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
|
|
endef
|
|
|
|
define Build/loader-common
|
|
rm -rf $@.src
|
|
$(MAKE) -C lzma-loader \
|
|
PKG_BUILD_DIR="$@.src" \
|
|
TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
|
|
BOARD="$(BOARDNAME)" \
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
$(1) compile loader.$(LOADER_TYPE)
|
|
mv "$@.$(LOADER_TYPE)" "$@"
|
|
rm -rf $@.src
|
|
endef
|
|
|
|
define Build/loader-okli-compile
|
|
$(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
|
|
endef
|
|
|
|
define Build/loader-kernel
|
|
$(call Build/loader-common,LOADER_DATA="$@")
|
|
endef
|
|
|
|
define Build/loader-kernel-cmdline
|
|
$(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
|
|
endef
|
|
|
|
define Build/loader-okli
|
|
dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
|
|
cat "$@" >> "$@.new"
|
|
mv "$@.new" "$@"
|
|
endef
|
|
|
|
define Build/relocate-kernel
|
|
rm -rf $@.relocate
|
|
$(CP) ../../generic/image/relocate $@.relocate
|
|
$(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
|
|
( \
|
|
dd if=$@.relocate/loader.bin bs=32 conv=sync && \
|
|
perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
|
|
cat "$@" \
|
|
) > "$@.new"
|
|
mv "$@.new" "$@"
|
|
rm -rf $@.relocate
|
|
endef
|
|
|
|
define Build/copy-file
|
|
cat "$(1)" > "$@"
|
|
endef
|
|
|
|
define Device/Default
|
|
BOARDNAME :=
|
|
DEVICE_PROFILE = $$(BOARDNAME)
|
|
PROFILES = Default Minimal $$(DEVICE_PROFILE)
|
|
MTDPARTS :=
|
|
BLOCKSIZE := 64k
|
|
CONSOLE = ttyS0,115200
|
|
CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
|
|
COMPILE :=
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
$(eval $(call BuildImage))
|