INAGAKI Hiroshi 81f7bdcb8d ath79: add support for Buffalo BHR-4GRV ... Buffalo BHR-4GRV is a wired router, based on Atheros AR7242. Specification: - Atheros AR7242 - 64 MB of RAM - 32 MB of Flash - 2x 16 MB SPI-NOR flash - 5x 10/100/1000 Mbps Ethernet - 3x LEDs, 2x keys - 1x USB 2.0 Type-A - UART header on PCB - JP1: Vcc, GND, TX, RX from reset button side Flash instruction using factory image: 1. Boot the BHR-4GRV normaly and connect the computer to its LAN port 2. Access to "http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html" with user "bufpy" and password "otdpopy" 3. Select the OpenWrt factory image and click "OK" button to perform firmware upgrade 4. Wait ~200 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2018-09-26 20:35:07 +02:00
..
board.d	ath79: add support for Buffalo BHR-4GRV	2018-09-26 20:35:07 +02:00
hotplug.d	ath79: fix support for Buffalo WZR-HP-G450H and split to dts/dtsi	2018-09-26 20:35:07 +02:00
diag.sh	treewide: drop unused get_status_led functions	2018-08-16 21:20:57 +02:00