openwrtv3/target/linux
INAGAKI Hiroshi 81f7bdcb8d ath79: add support for Buffalo BHR-4GRV
Buffalo BHR-4GRV is a wired router, based on Atheros AR7242.

Specification:

- Atheros AR7242
- 64 MB of RAM
- 32 MB of Flash
  - 2x 16 MB SPI-NOR flash
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 2x keys
- 1x USB 2.0 Type-A
- UART header on PCB
  - JP1: Vcc, GND, TX, RX from reset button side

Flash instruction using factory image:

1. Boot the BHR-4GRV normaly and connect the computer to its LAN port
2. Access to
"http://192.168.11.1/cgi-bin/cgi?req=frm&frm=py-db/firmup.html"
with user "bufpy" and password "otdpopy"
3. Select the OpenWrt factory image and click "OK" button to perform
firmware upgrade
4. Wait ~200 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-26 20:35:07 +02:00
..
adm5120 kernel: bump 3.18 to 3.18.123 2018-09-26 15:54:18 +02:00
adm8668 kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
apm821xx kernel: bump 4.14 to 4.14.72 2018-09-26 15:54:18 +02:00
ar7 ar7: remove linux 3.18 support 2018-08-13 17:10:39 +02:00
ar71xx mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
arc770 arc: Update variables substitutions in u-boot env files 2018-07-12 10:24:31 +02:00
archs38 arc: Update variables substitutions in u-boot env files 2018-07-12 10:24:31 +02:00
armvirt kernel: add missing ARM64_SSBD symbol 2018-07-31 12:22:11 +03:00
at91 treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
ath25 ath25: drop 4.9 kernel support 2018-05-22 07:20:13 +02:00
ath79 ath79: add support for Buffalo BHR-4GRV 2018-09-26 20:35:07 +02:00
au1000 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
bcm53xx kernel: bump 4.14 to 4.14.72 2018-09-26 15:54:18 +02:00
brcm47xx kernel: bump 4.14 to 4.14.71 2018-09-21 13:23:16 +02:00
brcm63xx treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
brcm2708 kernel: bump 4.9 to 4.9.129 2018-09-26 15:54:18 +02:00
cns3xxx kernel: bump 4.14 to 4.14.67 2018-08-28 23:05:39 +02:00
gemini kernel: remove DEVMEM and DEVKMEM from target's config 2018-07-07 18:19:39 +02:00
generic kernel: bump 4.14 to 4.14.72 2018-09-26 15:54:18 +02:00
imx6 imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxi 2018-09-05 10:00:01 +02:00
ipq40xx mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
ipq806x mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
ixp4xx kernel: bump 4.9 to 4.9.127 2018-09-17 15:47:44 +02:00
kirkwood kernel: bump 4.9 to 4.9.116 2018-08-01 09:46:59 +02:00
lantiq mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
layerscape kernel: bump 4.9 to 4.9.129 2018-09-26 15:54:18 +02:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mcs814x kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
mediatek kernel: bump 4.14 to 4.14.72 2018-09-26 15:54:18 +02:00
mpc85xx mpc85xx: add migration script for TP-Link TL-WDR4900 v1 WLAN PCI paths 2018-09-04 21:27:27 +02:00
mvebu mac80211: make ath10k-ct the default ath10k 2018-09-26 16:39:44 +02:00
mxs kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
octeon octeon: Add and set CPU type Octeon+ as default 2018-06-20 15:36:02 +02:00
octeontx kernel: add missing ARM64_SSBD symbol 2018-07-31 12:22:11 +03:00
omap omap: disable ubifs 2018-07-30 11:03:02 +02:00
omap24xx omap24xx: remove referece to not existing kmod-usb-musb-tusb6010 2018-01-15 13:13:34 +01:00
orion orion: remove linux 4.4 support 2018-04-19 14:38:57 +02:00
oxnas treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
pistachio kernel: bump 4.14 to 4.14.70 2018-09-17 15:47:44 +02:00
ppc40x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ppc44x kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
ramips ramips: fix Archer C20 sysupgrade 2018-09-26 20:35:07 +02:00
rb532 kernel: only optimized for size if small_flash 2018-07-12 18:15:32 +02:00
samsung treewide: fix some cosmetic glitches in dts files 2018-08-27 19:31:17 +02:00
sunxi sunxi: build image/uboot for the NanoPi NEO2 2018-09-22 21:20:55 +02:00
uml kernel: bump 4.9 to 4.9.100 2018-05-18 09:10:21 +02:00
x86 x86: geode: Add missing config options 2018-08-26 12:32:26 +02:00
xburst kernel: bump 3.18 to 3.18.119 2018-08-20 13:03:23 +02:00
zynq zynq: kernel: select FPGA-related configs 2018-09-22 21:20:55 +02:00
Makefile