openwrtv3/target/linux/lantiq/dts/VGV7519.dtsi
Mathias Kresin 7fd5171a34 lantiq: use the device tree bindings from rt2x00 driver
Set a device specific wireless mac address for ARV7506PW11, VGV7519 and
VGV7510KW22. The one from the EEPROM is a generic one and the same on
all boards.

Use the wifi@0,0 label and the pci0,0 compatible string for the
ARV7519PW and ARV7525PW since the pci vendor and device id is unknown.
It should work anyway since the compatible string isn't evaluated
(yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-09 20:02:18 +01:00

298 lines
6 KiB
Text

#include "vr9.dtsi"
/ {
model = "VGV7519 - KPN Experiabox V8";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &broadband_green;
led-internet = &internet_green;
led-wifi = &wireless_green;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boardconfig: partition@40000 {
label = "board_config";
reg = <0x40000 0x10000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,open-drain = <0>;
lantiq,output = <1>;
lantiq,pull = <0>;
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci-rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led0";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffff>;
lantiq,groups = <0x3>;
lantiq,dsl = <0x0>;
lantiq,phy1 = <0x0>;
lantiq,phy2 = <0x0>;
/* lantiq,rising; */
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
lantiq,portmask = <0x3>;
};
ifxhcd@E106000 {
status = "okay";
gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
};
pcie@d900000 {
status = "disabled";
};
};
gphy-xrx200 {
compatible = "lantiq,phy-xrx200";
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
phys = [ 00 01 ];
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
eco {
label = "eco";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
rfkill {
label = "rfkill";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
eco {
label = "vgv7519:blue:eco";
gpios = <&stp 2 GPIO_ACTIVE_LOW>;
};
wps_red {
label = "vgv7519:red:wps";
gpios = <&stp 3 GPIO_ACTIVE_LOW>;
};
wps_green {
label = "vgv7519:green:wps";
gpios = <&stp 4 GPIO_ACTIVE_LOW>;
};
upgrade {
label = "vgv7519:blue:upgrade";
gpios = <&stp 5 GPIO_ACTIVE_LOW>;
};
tv {
label = "vgv7519:green:tv";
gpios = <&stp 6 GPIO_ACTIVE_LOW>;
};
internet_green: internet_green {
label = "vgv7519:green:internet";
gpios = <&stp 7 GPIO_ACTIVE_LOW>;
};
internet_red {
label = "vgv7519:red:internet";
gpios = <&stp 8 GPIO_ACTIVE_LOW>;
};
broadband_red {
label = "vgv7519:red:broadband";
gpios = <&stp 9 GPIO_ACTIVE_LOW>;
};
broadband_green: broadband_green {
label = "vgv7519:green:broadband";
gpios = <&stp 10 GPIO_ACTIVE_LOW>;
};
voice {
label = "vgv7519:green:voice";
gpios = <&stp 11 GPIO_ACTIVE_LOW>;
};
wireless_red {
label = "vgv7519:red:wireless";
gpios = <&stp 12 GPIO_ACTIVE_LOW>;
};
wireless_green: wireless_green {
label = "vgv7519:green:wireless";
gpios = <&stp 13 GPIO_ACTIVE_LOW>;
};
power_green: power2 {
label = "vgv7519:green:power";
gpios = <&stp 14 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power {
label = "vgv7519:red:power";
gpios = <&stp 15 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
wifi@1814,3091 {
compatible = "pci1814,3091";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
ralink,mtd-eeprom-swap;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
};
};
&eth0 {
lan: interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mtd-mac-address = <&boardconfig 0x16>;
mtd-mac-address-increment = <1>;
lantiq,switch;
ethernet@0 {
compatible = "lantiq,xrx200-pdi-port";
reg = <0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
ethernet@1 {
compatible = "lantiq,xrx200-pdi-port";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&phy1>;
};
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
ethernet@4 {
compatible = "lantiq,xrx200-pdi-port";
reg = <4>;
phy-mode = "gmii";
phy-handle = <&phy13>;
};
};
wan: interface@1 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mtd-mac-address = <&boardconfig 0x16>;
lantiq,wan;
ethernet@5 {
compatible = "lantiq,xrx200-pdi-port";
reg = <5>;
phy-mode = "rgmii";
phy-handle = <&phy5>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "lantiq,xrx200-mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};