KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
Piotr Dymacz 56561b9f51 ar71xx: add support for TP-Link TL-WA850RE v2 
TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/391/195 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x internal antennas (embedded on PCB)
- 9x LED (all can be turned off with GPIO15), 2x button
- UART (J3) header on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in US version of the device, but should work
also with the same device version sold in other countries.

Available FLASH space, with LEDE trunk, is only 240 KB.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-02-14 12:25:33 +01:00

412 lines
11 KiB
C
Raw Blame History

/*
* Support for TP-Link boards:
* - TL-WA750RE v1
* - TL-WA801ND v2
* - TL-WA850RE v1/v2
* - TL-WA901ND v3
*
* Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
* Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
* Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define TL_WAX50RE_GPIO_LED_LAN 20
#define TL_WAX50RE_GPIO_LED_WLAN 13
#define TL_WAX50RE_GPIO_LED_RE 15
#define TL_WAX50RE_GPIO_LED_SIGNAL1 0
#define TL_WAX50RE_GPIO_LED_SIGNAL2 1
#define TL_WAX50RE_GPIO_LED_SIGNAL3 2
#define TL_WAX50RE_GPIO_LED_SIGNAL4 3
#define TL_WAX50RE_GPIO_LED_SIGNAL5 4
#define TL_WA850RE_V2_GPIO_LED_LAN 14
#define TL_WA850RE_V2_GPIO_LED_RE 12
#define TL_WA850RE_V2_GPIO_LED_SIGNAL1 0
#define TL_WA850RE_V2_GPIO_LED_SIGNAL2 1
#define TL_WA850RE_V2_GPIO_LED_SIGNAL3 2
#define TL_WA850RE_V2_GPIO_LED_SIGNAL4 3
#define TL_WA850RE_V2_GPIO_LED_SIGNAL5 4
#define TL_WA850RE_V2_GPIO_LED_WLAN 13
#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15
#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
#define TL_WA860RE_GPIO_LED_POWER_GREEN 14
#define TL_WA860RE_GPIO_LED_LAN 20
#define TL_WA801ND_V2_GPIO_LED_LAN 18
#define TL_WA801ND_V2_GPIO_LED_SYSTEM 14
#define TL_WAX50RE_GPIO_BTN_RESET 17
#define TL_WAX50RE_GPIO_BTN_WPS 16
#define TL_WA860RE_GPIO_BTN_RESET 17
#define TL_WA860RE_GPIO_BTN_WPS 16
#define TL_WA860RE_GPIO_BTN_ONOFF 11
#define TL_WAX50RE_KEYS_POLL_INTERVAL 20 /* msecs */
#define TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL (3 * TL_WAX50RE_KEYS_POLL_INTERVAL)
static const char *tl_wax50re_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data tl_wax50re_flash_data = {
.part_probes = tl_wax50re_part_probes,
};
static struct gpio_led tl_wa750re_leds_gpio[] __initdata = {
{
.name = "tp-link:orange:lan",
.gpio = TL_WAX50RE_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "tp-link:orange:wlan",
.gpio = TL_WAX50RE_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "tp-link:orange:re",
.gpio = TL_WAX50RE_GPIO_LED_RE,
.active_low = 1,
}, {
.name = "tp-link:orange:signal1",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL1,
.active_low = 1,
}, {
.name = "tp-link:orange:signal2",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL2,
.active_low = 1,
}, {
.name = "tp-link:orange:signal3",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL3,
.active_low = 1,
}, {
.name = "tp-link:orange:signal4",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL4,
.active_low = 1,
}, {
.name = "tp-link:orange:signal5",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL5,
.active_low = 1,
},
};
static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
{
.name = "tp-link:blue:lan",
.gpio = TL_WAX50RE_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "tp-link:blue:wlan",
.gpio = TL_WAX50RE_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "tp-link:blue:re",
.gpio = TL_WAX50RE_GPIO_LED_RE,
.active_low = 1,
}, {
.name = "tp-link:blue:signal1",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL1,
.active_low = 1,
}, {
.name = "tp-link:blue:signal2",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL2,
.active_low = 1,
}, {
.name = "tp-link:blue:signal3",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL3,
.active_low = 1,
}, {
.name = "tp-link:blue:signal4",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL4,
.active_low = 1,
}, {
.name = "tp-link:blue:signal5",
.gpio = TL_WAX50RE_GPIO_LED_SIGNAL5,
.active_low = 1,
},
};
static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
{
.name = "tp-link:blue:lan",
.gpio = TL_WA850RE_V2_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "tp-link:blue:re",
.gpio = TL_WA850RE_V2_GPIO_LED_RE,
.active_low = 1,
}, {
.name = "tp-link:blue:signal1",
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL1,
.active_low = 1,
}, {
.name = "tp-link:blue:signal2",
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL2,
.active_low = 1,
}, {
.name = "tp-link:blue:signal3",
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL3,
.active_low = 1,
}, {
.name = "tp-link:blue:signal4",
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL4,
.active_low = 1,
}, {
.name = "tp-link:blue:signal5",
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL5,
.active_low = 1,
}, {
.name = "tp-link:blue:wlan",
.gpio = TL_WA850RE_V2_GPIO_LED_WLAN,
.active_low = 1,
},
};
static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
{
.name = "tp-link:green:lan",
.gpio = TL_WA860RE_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "tp-link:green:power",
.gpio = TL_WA860RE_GPIO_LED_POWER_GREEN,
.active_low = 1,
}, {
.name = "tp-link:orange:power",
.gpio = TL_WA860RE_GPIO_LED_POWER_ORANGE,
.active_low = 1,
}, {
.name = "tp-link:green:wlan",
.gpio = TL_WA860RE_GPIO_LED_WLAN_GREEN,
.active_low = 1,
}, {
.name = "tp-link:orange:wlan",
.gpio = TL_WA860RE_GPIO_LED_WLAN_ORANGE,
.active_low = 1,
},
};
static struct gpio_keys_button tl_wax50re_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WAX50RE_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "WPS",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WAX50RE_GPIO_BTN_WPS,
.active_low = 1,
},
};
static struct gpio_keys_button tl_wa860re_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WA860RE_GPIO_BTN_RESET,
.active_low = 1,
}, {
.desc = "WPS",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WA860RE_GPIO_BTN_WPS,
.active_low = 1,
}, {
.desc = "ONOFF",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
.gpio = TL_WA860RE_GPIO_BTN_ONOFF,
.active_low = 1,
},
};
static struct gpio_led tl_wa801nd_v2_leds_gpio[] __initdata = {
{
.name = "tp-link:green:lan",
.gpio = TL_WA801ND_V2_GPIO_LED_LAN,
.active_low = 1,
}, {
.name = "tp-link:green:wlan",
.gpio = TL_WAX50RE_GPIO_LED_WLAN,
.active_low = 1,
}, {
.name = "tp-link:green:qss",
.gpio = TL_WAX50RE_GPIO_LED_RE,
.active_low = 1,
}, {
.name = "tp-link:green:system",
.gpio = TL_WA801ND_V2_GPIO_LED_SYSTEM,
.active_low = 1,
},
};
static void __init tl_ap123_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ath79_register_m25p80(&tl_wax50re_flash_data);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_register_eth(0);
ath79_register_wmac(ee, mac);
}
static void __init tl_ap143_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
u8 tmpmac[ETH_ALEN];
ath79_register_m25p80(NULL);
ath79_setup_ar933x_phy4_switch(false, false);
ath79_register_mdio(0, 0x0);
ath79_switch_data.phy4_mii_en = 1;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.speed = SPEED_100;
ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
ath79_register_eth(0);
ath79_init_mac(tmpmac, mac, 0);
ath79_register_wmac(ee, mac);
}
static void __init tl_wa750re_setup(void)
{
tl_ap123_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa750re_leds_gpio),
tl_wa750re_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wax50re_gpio_keys),
tl_wax50re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA750RE, "TL-WA750RE", "TP-LINK TL-WA750RE",
tl_wa750re_setup);
static void __init tl_wa801nd_v2_setup(void)
{
tl_ap123_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
tl_wa801nd_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wax50re_gpio_keys),
tl_wax50re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V2, "TL-WA801ND-v2", "TP-LINK TL-WA801ND v2",
tl_wa801nd_v2_setup);
static void __init tl_wa850re_setup(void)
{
tl_ap123_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_leds_gpio),
tl_wa850re_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wax50re_gpio_keys),
tl_wax50re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
tl_wa850re_setup);
static void __init tl_wa850re_v2_setup(void)
{
tl_ap143_setup();
/* For GPIO 0~4 */
ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
AR934X_GPIO_FUNC_CLK_OBS4_EN);
/* Allow to enable/disable all LEDs from userspace */
gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"LEDs enable");
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_v2_leds_gpio),
tl_wa850re_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wax50re_gpio_keys),
tl_wax50re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
"TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
static void __init tl_wa860re_setup(void)
{
tl_ap123_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa860re_leds_gpio),
tl_wa860re_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wa860re_gpio_keys),
tl_wa860re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA860RE, "TL-WA860RE", "TP-LINK TL-WA860RE",
tl_wa860re_setup);
static void __init tl_wa901nd_v3_setup(void)
{
tl_ap123_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
tl_wa801nd_v2_leds_gpio);
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
ARRAY_SIZE(tl_wax50re_gpio_keys) - 1,
tl_wax50re_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V3, "TL-WA901ND-v3", "TP-LINK TL-WA901ND v3",
tl_wa901nd_v3_setup);
Reference in a new issue View git blame Copy permalink