ar71xx: add support for TP-Link TL-WA850RE v2
TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender, based on Qualcomm/Atheros QCA9533 v2. Short specification: - 550/391/195 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 32 MB of RAM (DDR1) - 4 MB of FLASH - 2T2R 2.4 GHz - 2x internal antennas (embedded on PCB) - 9x LED (all can be turned off with GPIO15), 2x button - UART (J3) header on PCB Flash instruction: use "factory" image directly in vendor GUI. Warning: this device does not include any kind of recovery mechanism in the bootloader and disassembling process is not trivial. You can access vendor firmware over serial line using: - login: root - password: sohoadmin Image was tested only in US version of the device, but should work also with the same device version sold in other countries. Available FLASH space, with LEDE trunk, is only 240 KB. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This commit is contained in:
parent
a9fdb35740
commit
56561b9f51
14 changed files with 182 additions and 5 deletions
|
@ -574,7 +574,8 @@ tl-wa801nd-v3)
|
|||
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
|
||||
;;
|
||||
tl-wa850re)
|
||||
tl-wa850re|\
|
||||
tl-wa850re-v2)
|
||||
ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
|
||||
ucidef_set_rssimon "wlan0" "200000" "1"
|
||||
|
|
|
@ -108,6 +108,7 @@ ar71xx_setup_interfaces()
|
|||
tl-wa801nd-v2|\
|
||||
tl-wa830re-v2|\
|
||||
tl-wa850re|\
|
||||
tl-wa850re-v2|\
|
||||
tl-wa901nd|\
|
||||
tl-wa901nd-v2|\
|
||||
tl-wa901nd-v3|\
|
||||
|
|
|
@ -341,7 +341,8 @@ get_status_led() {
|
|||
tl-wa750re)
|
||||
status_led="tp-link:orange:re"
|
||||
;;
|
||||
tl-wa850re)
|
||||
tl-wa850re|\
|
||||
tl-wa850re-v2)
|
||||
status_led="tp-link:blue:re"
|
||||
;;
|
||||
tl-wa860re)
|
||||
|
|
|
@ -998,6 +998,9 @@ ar71xx_board_detect() {
|
|||
*TL-WA850RE)
|
||||
name="tl-wa850re"
|
||||
;;
|
||||
*"TL-WA850RE v2")
|
||||
name="tl-wa850re-v2"
|
||||
;;
|
||||
*TL-WA860RE)
|
||||
name="tl-wa860re"
|
||||
;;
|
||||
|
|
|
@ -401,6 +401,7 @@ platform_check_image() {
|
|||
tl-wa801nd-v3|\
|
||||
tl-wa830re-v2|\
|
||||
tl-wa850re|\
|
||||
tl-wa850re-v2|\
|
||||
tl-wa860re|\
|
||||
tl-wa901nd-v2|\
|
||||
tl-wa901nd-v3|\
|
||||
|
|
|
@ -172,6 +172,7 @@ CONFIG_ATH79_MACH_TL_WA701ND_V2=y
|
|||
CONFIG_ATH79_MACH_TL_WA7210N_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WA801ND_V3=y
|
||||
CONFIG_ATH79_MACH_TL_WA830RE_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WA850RE_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WA901ND=y
|
||||
CONFIG_ATH79_MACH_TL_WA901ND_V2=y
|
||||
CONFIG_ATH79_MACH_TL_WA901ND_V4=y
|
||||
|
|
|
@ -1395,6 +1395,15 @@ config ATH79_MACH_TL_WA830RE_V2
|
|||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_TL_WA850RE_V2
|
||||
bool "TP-LINK TL-WA850RE v2 support"
|
||||
select SOC_QCA953X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_WMAC
|
||||
|
||||
config ATH79_MACH_TL_WA901ND
|
||||
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
|
||||
select SOC_AR724X
|
||||
|
|
|
@ -176,6 +176,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
|
|||
obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2) += mach-tl-wax50re.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
|
||||
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4) += mach-tl-wa901nd-v4.o
|
||||
|
|
|
@ -1,9 +1,13 @@
|
|||
/*
|
||||
* TP-LINK TL-WA750RE v1/TL-WA801ND v2/TL-WA850RE v1/TL-WA901ND v3
|
||||
* board support
|
||||
* Support for TP-Link boards:
|
||||
* - TL-WA750RE v1
|
||||
* - TL-WA801ND v2
|
||||
* - TL-WA850RE v1/v2
|
||||
* - TL-WA901ND v3
|
||||
*
|
||||
* Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
|
||||
* Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
|
||||
* Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
|
@ -33,6 +37,17 @@
|
|||
#define TL_WAX50RE_GPIO_LED_SIGNAL4 3
|
||||
#define TL_WAX50RE_GPIO_LED_SIGNAL5 4
|
||||
|
||||
#define TL_WA850RE_V2_GPIO_LED_LAN 14
|
||||
#define TL_WA850RE_V2_GPIO_LED_RE 12
|
||||
#define TL_WA850RE_V2_GPIO_LED_SIGNAL1 0
|
||||
#define TL_WA850RE_V2_GPIO_LED_SIGNAL2 1
|
||||
#define TL_WA850RE_V2_GPIO_LED_SIGNAL3 2
|
||||
#define TL_WA850RE_V2_GPIO_LED_SIGNAL4 3
|
||||
#define TL_WA850RE_V2_GPIO_LED_SIGNAL5 4
|
||||
#define TL_WA850RE_V2_GPIO_LED_WLAN 13
|
||||
|
||||
#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15
|
||||
|
||||
#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
|
||||
#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
|
||||
#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
|
||||
|
@ -133,6 +148,42 @@ static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "tp-link:blue:lan",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_LAN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:re",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_RE,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:signal1",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL1,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:signal2",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL2,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:signal3",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL3,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:signal4",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL4,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:signal5",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL5,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "tp-link:blue:wlan",
|
||||
.gpio = TL_WA850RE_V2_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "tp-link:green:lan",
|
||||
|
@ -242,6 +293,30 @@ static void __init tl_ap123_setup(void)
|
|||
ath79_register_wmac(ee, mac);
|
||||
}
|
||||
|
||||
static void __init tl_ap143_setup(void)
|
||||
{
|
||||
u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008);
|
||||
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
|
||||
u8 tmpmac[ETH_ALEN];
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_setup_ar933x_phy4_switch(false, false);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_init_mac(tmpmac, mac, 0);
|
||||
ath79_register_wmac(ee, mac);
|
||||
}
|
||||
|
||||
static void __init tl_wa750re_setup(void)
|
||||
{
|
||||
tl_ap123_setup();
|
||||
|
@ -284,6 +359,30 @@ static void __init tl_wa850re_setup(void)
|
|||
MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
|
||||
tl_wa850re_setup);
|
||||
|
||||
static void __init tl_wa850re_v2_setup(void)
|
||||
{
|
||||
tl_ap143_setup();
|
||||
|
||||
/* For GPIO 0~4 */
|
||||
ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
|
||||
AR934X_GPIO_FUNC_CLK_OBS4_EN);
|
||||
|
||||
/* Allow to enable/disable all LEDs from userspace */
|
||||
gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS,
|
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||
"LEDs enable");
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_v2_leds_gpio),
|
||||
tl_wa850re_v2_leds_gpio);
|
||||
|
||||
ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(tl_wax50re_gpio_keys),
|
||||
tl_wax50re_gpio_keys);
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
|
||||
"TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
|
||||
|
||||
static void __init tl_wa860re_setup(void)
|
||||
{
|
||||
tl_ap123_setup();
|
||||
|
|
|
@ -206,6 +206,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_TL_WA801ND_V3, /* TP-LINK TL-WA801ND v3 */
|
||||
ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
|
||||
ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
|
||||
ATH79_MACH_TL_WA850RE_V2, /* TP-LINK TL-WA850RE v2 */
|
||||
ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
|
||||
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
|
||||
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
|
||||
|
|
|
@ -981,6 +981,20 @@ define Device/tl-wa850re-v1
|
|||
TPLINK_HWID := 0x08500001
|
||||
endef
|
||||
|
||||
define Device/tl-wa850re-v2
|
||||
$(Device/tplink)
|
||||
DEVICE_TITLE := TP-LINK TL-WA850RE v2
|
||||
DEVICE_PACKAGES := rssileds
|
||||
BOARDNAME := TL-WA850RE-V2
|
||||
DEVICE_PROFILE := TLWA850
|
||||
TPLINK_BOARD_NAME := TLWA850REV2
|
||||
TPLINK_HWID := 0x08500002
|
||||
KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
|
||||
IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
|
||||
IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
|
||||
MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
|
||||
endef
|
||||
|
||||
define Device/tl-wa860re-v1
|
||||
$(Device/tplink-4mlzma)
|
||||
DEVICE_TITLE := TP-LINK TL-WA860RE
|
||||
|
@ -988,7 +1002,7 @@ define Device/tl-wa860re-v1
|
|||
DEVICE_PROFILE := TLWA860
|
||||
TPLINK_HWID := 0x08600001
|
||||
endef
|
||||
TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
|
||||
TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa850re-v2 tl-wa860re-v1
|
||||
|
||||
define Device/tl-wa901nd-v1
|
||||
$(Device/tplink-4m)
|
||||
|
|
|
@ -137,6 +137,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
|
|||
# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA901ND is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
|
||||
|
|
|
@ -124,6 +124,7 @@
|
|||
# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA901ND is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
|
||||
# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
|
||||
|
|
|
@ -427,6 +427,49 @@ static struct device_info boards[] = {
|
|||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the TL-WA850RE v2 */
|
||||
{
|
||||
.id = "TLWA850REV2",
|
||||
.vendor = "",
|
||||
.support_list =
|
||||
"SupportList:\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
|
||||
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
|
||||
.support_trail = '\x00',
|
||||
|
||||
/**
|
||||
576KB were moved from file-system to os-image
|
||||
in comparison to the stock image
|
||||
*/
|
||||
.partitions = {
|
||||
{"fs-uboot", 0x00000, 0x20000},
|
||||
{"os-image", 0x20000, 0x150000},
|
||||
{"file-system", 0x170000, 0x240000},
|
||||
{"partition-table", 0x3b0000, 0x02000},
|
||||
{"default-mac", 0x3c0000, 0x00020},
|
||||
{"pin", 0x3c0100, 0x00020},
|
||||
{"product-info", 0x3c1000, 0x01000},
|
||||
{"soft-version", 0x3c2000, 0x00100},
|
||||
{"support-list", 0x3c3000, 0x01000},
|
||||
{"profile", 0x3c4000, 0x08000},
|
||||
{"user-config", 0x3d0000, 0x10000},
|
||||
{"default-config", 0x3e0000, 0x10000},
|
||||
{"radio", 0x3f0000, 0x10000},
|
||||
{NULL, 0, 0}
|
||||
},
|
||||
|
||||
.first_sysupgrade_partition = "os-image",
|
||||
.last_sysupgrade_partition = "file-system"
|
||||
},
|
||||
|
||||
/** Firmware layout for the TL-WR1043 v4 */
|
||||
{
|
||||
.id = "TLWR1043NDV4",
|
||||
|
|
Loading…
Reference in a new issue