50e3659703
Netgear DM200 is an inexpensive VDSL modem:
CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz
RAM: 64MiB
Flash: 8MiB
Ethernet: 1x100M
DSL: VDSL2+, ADSL2+
reset button, 3x bi-color LEDs
Serial port is 115200 baud, on the 4 pin header; pins from the bottom to
top are GND, RX, TX.
To upgrade from the vendor firmware, upload factory.img
The DM200 bootloader supports flashing over TFTP; hold the reset button
while powering on the device, and wait for the power light to start
flashing green before releasing. The device is now listening on
192.168.0.1/24, and can be sent a factory.img or a netgear image with a
TFTP put.
Once the image is loaded, it will be written to the flash, and the
device will reboot; this will take a few minutes.
Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their
own ports for this device and provided valuable feedback.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
215 lines
4.8 KiB
Bash
Executable file
215 lines
4.8 KiB
Bash
Executable file
#!/bin/sh
|
|
#
|
|
# Copyright (C) 2011-2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
. /lib/functions/lantiq.sh
|
|
|
|
board_config_update
|
|
|
|
vpi=1
|
|
vci=32
|
|
annex="a"
|
|
encaps="llc"
|
|
payload="bridged"
|
|
lan_mac=""
|
|
wan_mac=""
|
|
interface_wan=""
|
|
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
ACMP252|GIGASX76X)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ALL0333CJ)
|
|
annex="b"
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
ARV4510PW)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
ARV4520PW)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ARV7506PW11)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
ARV7519PW)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
|
;;
|
|
|
|
ARV7519RW22)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
|
|
;;
|
|
|
|
ASL56026)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
|
|
ucidef_add_switch "switch0"\
|
|
"2:lan" "3:lan" "6t@eth0"
|
|
;;
|
|
|
|
BTHOMEHUBV2B)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
|
;;
|
|
|
|
BTHOMEHUBV3A)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
BTHOMEHUBV5A)
|
|
lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
DGN3500*)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
|
;;
|
|
|
|
DM200)
|
|
lan_mac=$(mtd_get_mac_binary ART 0)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
EASY80920NAND|EASY80920NOR)
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
FRITZ3370)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
|
|
;;
|
|
|
|
FRITZ7320)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
;;
|
|
|
|
FRITZ7360SL)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
H201L)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
|
;;
|
|
|
|
P2601HNFX)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
|
;;
|
|
|
|
P2812HNUF*)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
|
|
;;
|
|
|
|
TDW8970|TDW8980)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
|
|
;;
|
|
|
|
VG3503J)
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:1" "4:lan:2" "6t@eth0"
|
|
;;
|
|
|
|
VR200v)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
|
|
;;
|
|
|
|
VGV7510KW22*)
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
|
ucidef_add_switch "switch0" \
|
|
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
VGV7519*)
|
|
wan_mac=$(mtd_get_mac_binary board_config 22)
|
|
ucidef_add_switch "switch0" \
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
;;
|
|
|
|
WBMR)
|
|
ucidef_add_switch "switch0" \
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
|
;;
|
|
|
|
WBMR300)
|
|
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
|
|
wan_mac="$lan_mac"
|
|
ucidef_add_switch "switch0" \
|
|
"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
|
|
;;
|
|
|
|
*)
|
|
ucidef_set_interface_lan 'eth0'
|
|
;;
|
|
|
|
esac
|
|
|
|
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
|
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
|
|
|
|
if lantiq_is_vdsl_system; then
|
|
interface_wan="ptm0"
|
|
ucidef_add_vdsl_modem "$annex" "av" "ptm"
|
|
else
|
|
interface_wan="nas0"
|
|
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
|
fi
|
|
|
|
ucidef_set_interface_wan "$interface_wan" "pppoe"
|
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|
|
|